Availability
Showing In Stock Items. Show All 818 Items.
On Sale
AFR's 335cc BBC Enforcer cylinder heads feature their Permanent Mold "As-Cast" Technology surfaces on the intake runners, exhaust runners, and combustion chambers that allow for extremely accurate and repeatable port location/performance. These budget-friendly heads are perfect for your 509 to 540 cu.in. operating below 6,500 rpm. They come fully assembled with the identical components found in AFR's higher end CNC-ported cylinder heads—such as ARP rockers studs, PAC Racing springs, Viton® valve seals, AFR adjustable guide plates, machined bead valve locks (not stamped), hardened spring seats, and AFR's one-piece 8mm 21 4N stainless steel valves. Order the cylinder heads recommended for your year/make and engine application.
( 5 )
$1,024.00
$921.60
On Sale
Holley Sniper EFI HyperSpark distributor kits were designed to make upgrading your ignition on a Sniper EFI-equipped engine simple. When installed concurrently with a new Sniper EFI system, the combination creates the easiest way to install EFI conversion on the market—and only four flying lead connections are required! The harness only requires one connection to a switched power source, battery positive, battery negative, and fuel pump power. The pre-terminated connectors and a built in 40A relay provides power to all of the components within the system. With the included Sniper EFI main harness you no longer need to run multiple wires to provide switched power for each individual component, which not only helps prevent wiring confusion, but it will also speed up your install time and clean up your engine bay. Simply route the harness and pre-terminated connectors to your HyperSpark coil, distributor, and ignition box and plug them in. Available for all popular engine combinations, these kits come with a distributor, coil, ignition box, and an integrated Sniper EFI harness. Order the application you need. Key features: * Plug-and-Play Sniper EFI main harness replaces the standard Sniper EFI harness with four loose leads, battery positive, battery ground, switched 12 V, and fuel pump power, for a simple and streamline installation * Designed for existing or new Sniper EFI installations (the HyperSpark Master Kit harness retains the same flying lead wire colors as the Sniper EFI main harness; new installations will not use the Sniper EFI standard harness or coil driver * Complete ignition system in a box, including: HyperSpark ignition box, HyperSpark ignition coil, HyperSpark distributor (for your application), and a plug-and-play main harness * HyperSpark distributors feature a Hall Effect crank trigger sensor providing a noise-free rpm signal to the Sniper ECU * Patented clear installation cap eliminates any confusion while installing the distributor * HyperSpark CD ignition box is seal and powder coated to be installed in the harshest of locations * External LED on HyperSpark CD Ignition box helps verify 12 V, cranking rpm, and low battery voltage * 135mJ of spark energy when used with the HyperSpark ignition coil, ensures complete combustion * Integrated ignition coil bracket simplifies mounting the Ignition coil * Ignition coil connector removes any doubt of loose connections at the Ignition coil * Enables timing control on a Sniper EFI Installation
( 22 )
$999.95
$898.95
Summit Racing™ precision cast cylinder heads are made from tough A-356 aluminum alloy and feature Permanent Mold "As-Cast" technology. Port accuracy is unrivaled--meaning CNC porting is not required to provide superior flow. The result is CNC-ported performance at a fraction of the price! We start with precision CNC-finished faces and bolt holes for accuracy and fitment. American craftsmen expertly size and install the manganese bronze valve guides and interlocking ductile iron seats before finishing with a competition-grade valve job. From there, the decks are given a final pass for superior finish. They are finish-assembled in the USA with top-quality components like PAC Racing springs, fasteners, one-piece 21 4N stainless valves, machined locks, Viton® seals and chromoly steel retainers. The final result is the performance you want and Summit Racing™ quality you TRUST!
( 15 )
$899.99
QA1 GM 2.0 Street control arms provide increased positive caster compared to OE arms and are among the lightest available. These arms feature a lower unsprung weight and improved performance without sacrificing durability. Each arm includes a QA1 integrated ball joint design which is stronger than OEM and rebuildable for tunability, providing long-term reliable service. These arms are designed with billet cross shafts for reduced weight and durability for the long haul. Double-sheer lower mounts are coil-over ready for a clean installation. QA1 GM 2.0 Street control arms look incredible and use no unsightly additional adapters! Form meets function with these newly designed arms that look and perform great without requiring painstaking restoring like factory stamped steel control arms.
( 22 )
$854.95
Air Lift WirelessAir 2nd generation on-board air compressor EZ mount systems give you everything you need for the fastest, easiest installation possible. EZ Mount systems package the manifold and upgraded, heavy-duty compressor into one convenient, pre-assembled and factory-tested bracket—giving you everything you need to have full control of your air springs in no time at all. Control the air like a boss with your Air Lift WirelessAir 2nd generation EZ mount kit. Features and items: * Inflate and deflate each air spring independently to different pressures * LCD-display wireless controller * One-touch control from inside or outside vehicle is perfect for uneven/top-heavy loads * Two user-defined memory buttons * Compact, dual-path design * Bluetooth-enabled manifold allows for over-the-air software updates * All wiring, hardware, and fittings required for installation
( 8 )
$799.95
PSC XD steering gears feature 45mm bearings and sector shafts to eliminate the flex that could cause seals to fail. They feature ratios and components that make parking easier, highway driving more stable, and maneuvering effortless. OEM steering gears in some trucks could be a problem, until now. Make handling your vehicle a pleasure with PSC XD steering gears.
( 14 )
$899.99
Eaton Detroit Truetrac differentials use a patented design of parallel-axis planetary helix gears to provide a quiet, automatic splitting of torque. They perform like a limited-slip differential under normal driving conditions, automatically transferring torque to the wheel with better traction when ground conditions warrant. These replacement units are available for dozens of axle applications.
( 502 )
$753.99
—
$993.99
On Sale
Summit Racing™ offers ignition tune-up kit Pro Packs for countless vehicles from the 1950s and up. Depending on your application, the kits may include a distributor, ignition coil, spark plugs and wires, ignition box and module, rotor, and many other options. Get the most from your ignition and engine; choose the ignition tune-up kit Pro Pack recommended for your car or truck.
( 51 )
$861.84
—
$1,007.33
$778.24
—
$915.93
Howards Cams Rattler camshaft and lifter kits are designed for maximum performance. Utilizing the highest grade race quality cores available, the Rattlers are 100 percent Rockwell checked and Parkerized to ensure the highest quality control standards available anywhere. They're manufactured on dedicated high-precision CNC cam grinding machines, and the hydraulic lifters offer precision oil control. Howards Cams Rattler camshaft and lifter kits are ideal OE replacements, as well as for use in high performance racing applications.
( 25 )
$999.99
Offenhauser Dual Port intake manifolds feature completely separate runner systems for the primaries and secondaries for more power across the rpm range. At low-load, the primaries feed the air/fuel charge through the smaller bottom passages at near sonic speed, improving power and efficiency. When the secondaries open, their charge goes through the bigger, cooler upper passages. Then, in turn, it is rammed into the cylinders when it encounters the high-velocity mix from the primaries. The results are better fuel economy and a 15-30 percent power increase across the entire rpm range. These manifolds are available in a variety of styles and options for many year/make and engine applications.
( 46 )
$799.99
Intended for high-horsepower street fans, the McLeod RST Street Twin clutch kits are economically priced twin disc clutches that use your existing flywheel. Able to handle up to 800 hp, the RST Street Twin clutches remain completely street-drivable. The organic lined clutch discs provide smooth engagement with a soft pedal effort, making these clutch kits ideal for the street performance enthusiast. (For select vehicles where these clutches are not adaptable to your existing flywheel, a new flywheel is included in the kit.) Here are some additional features of the McLeod RST Street Twin clutch kits: * Alignment tool included * Lighter-than-stock pedal feel * Will bolt to factory flywheel * CNC-machined and anodized flywheel adapter ring * Organic disc facing for smooth and even clutch engagement with excellent release qualities * Low rotating mass for quick revs * Blanchard ground floater with multiple straps to reduce noise for streetability
( 84 )
$825.00
—
$999.00
IHC Suspension offers replacement control arms for countless truck applications—including models from Chevrolet, GMC, Ram, and Ford. The steel tubular arms are black powdercoated to resist rust and corrosion. Most of the kits include adjustable control arms to achieve the desired ride height, along with ball joints, polyurethane bushings, and hardware. Order the control arms recommended for your vehicle.
( 7 )
$780.00
Stay ahead of the curve with fresh instrumentation, like the Dakota Digital VHX direct-fit analog gauge systems. Ideal for classic car restorations, this innovative line features dozens of single dials, clusters, and multi-gauge panels, which install into your vintage ride with no modifications needed. We're talking units for various models of Ford, Chevy, Mercury, Oldsmobile, Jeep, Toyota, Buick, Pontiac, and Dodge … with new "replacements" available for cars and trucks as far back as 1932! Depending on the system you select, you could receive data readings for as many as 20 automotive functions; and, bringing the retro dashboard displays into the 21st century are bright LCD message centers, backlit faces, and fully lit needles. These gauge kits are equally impressive behind the scenes, with solid-state sensors, precision stepper motors, and customizable data readouts. Dakota Digital gauges have revolutionized the industry—just think what they'll do for your driving experience!
( 489 )
$945.25
XS Power RSV Titan8 lithium batteries are designed to maximize capacity and deep cycling abilities. Part of XS Power's Lithium Titanate Oxide (LTO) Series, they have double the amount of storage energy but only half of the instant discharge energy, giving them double the capacity rating, but half of the wattage rating. The built-in 2/0 bussing allows up to four positive and four negative hidden direct connections to each module without the need for any external exposed bussing, while still leaving two easily accessible top terminals and four series or parallel expansion terminals to easily build a bank of nearly any configuration from 12 V, 24 V, 36 V, or any configuration imaginable. XS Power RSV Titan8 BCI direct-fit models are also available.
Not Yet Reviewed
$999.99
Cam Motion lifters are available to fit your desired level of performance and budget. From economical stock replacements to their High Performance, Racing, and Premium lines of lifters, Cam Motion covers many applications. Their Premium hydraulic roller lifters feature cold-forged steel construction, precision-ground needle roller bearings and extra-long pistons, precision oil metering, and high-flow, quick-reacting check valves. Cam Motion lifters are available in factory tray/retainer-styles and tie bar-styles.
( 8 )
$766.32
South Bend Clutch Dyna Max organic clutch kits are manufactured with performance organic friction material. Designed to provide smooth clutch engagement, these Dyna Max organic clutch kits include the necessary parts you need to do the job—and many kits include Kevlar® pilot bushings. The kits are available for a variety of clutch styles and applications and may come with or without a flywheel. Select the kit to fit your application needs.
( 101 )
$824.77
—
$986.46
McLeod RXT Street Twin clutch kits are ideal for the extreme horsepower enthusiast who wants performance and economy. Capable of handling up to 1,000 hp, the RXT Street Twin clutches are for those who've kicked it up another notch—but still require streetability. The ceramic facing on the clutch discs provides slightly aggressive engagement with a soft pedal effort, making these clutches suitable for most street performance enthusiasts. Match your vehicle specs to the correct model from McLeod. Additional features include: * Alignment tool * Lighter-than-stock pedal feel * Available with dedicated flywheel or adapter ring for factory flywheel * CNC-machined and anodized flywheel adapter ring * Smooth engagement with excellent release qualities * Ceramic facings on disc increase holding power over similar organic linings * Low rotating mass for quick revs * Blanchard ground floater with multiple straps to reduce noise for streetability
( 47 )
$995.00
Summit Racing™ Pro SBC LS firing order hydraulic roller retrofit cams are available in seven stages--from a small smooth idle cam capable of towing, to a big duration stomper that's ready to go bracket racing. Utilizing the LS firing order on a traditional small block Chevy improves the engine in several ways, including exhaust sound and harmonic improvements. These kits include a premium camshaft and drop-in link bar style hydraulic roller lifters. Best of all: these Pro SBC LS firing order hydraulic roller retrofit cams are precision-ground in the USA on USA billets! Order the cam recommended or your application.
( 2 )
$941.83
On Sale
These Summit Racing™ intake manifold, carburetor, and air cleaner Pro Packs include all of the necessary parts to change out your engine's induction system. They feature an aluminum intake manifold, carburetor, air cleaner, carburetor studs, and gaskets. Available for Ford, Chevy, Mopar, and Pontiac, these Summit Racing™ intake manifold, carburetor, and air cleaner Pro Packs will give your engine increased horsepower and torque and better drivability.
( 127 )
$898.86
$762.92
—
$912.93
Increase your horsepower and torque with JBA Cat4ward headers! They are designed with 3/8 in. thick laser-cut flanges, mandrel-bent primary tubes, and feature JBA's patented Firecone merge collectors. They're available in either steel or 409 stainless steel and are offered in a chrome plated or high-temperature silver ceramic finish for most applications. JBA includes premium-quality mounting hardware and instructions for the installation and, unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This would include components such as cylinder heads, chassis, steering, motor mounts, body mounts, bushings, etc. If aftermarket components, parts from other applications, or custom-altered parts are used on your vehicle, it is the installer's responsibility to verify fitment.
( 493 )
$773.95
—
$975.95
On Sale
These Quick Fuel SS-Series carburetors are designed to offer the power of a race carburetor in a streetable package that weighs 5 lbs. less than other carburetors. Manufactured completely from aluminum, they allow you to change the idle feed and offer power valve channel restrictions and idle and high-speed air bleeds for the ultimate in tunability. The solid-state, electric-choke Quick Fuel SS-Series carburetors have billet throttle bodies, billet metering blocks, 4-corner idle systems, secondary jet extensions, and notched secondary floats. The vacuum secondary carburetors feature fuel bowls with a single-sight glass window, while the mechanical secondary carburetors have dual-inlet, dual-sight glass 4500-style fuel bowls and include additional links to tune the secondary opening rate. Quick Fuel has done it--they've created all-aluminum Super Street carburetors that are perfect for your high performance street machine.
( 48 )
$999.95
$853.95
—
$949.95
QA1 Pro coilover systems are engineered from the ground up to offer unmatched performance over stock suspension setups. Pro coilover systems utilize adjustable and non-adjustable coilover shocks and springs designed specifically for replacing the factory shocks and springs. This combination offers ride height adjustment and variable position valving adjustment (where applicable) for performance not found in other kits. Choose QA1 Pro coilover systems for your next suspension upgrade.
( 346 )
$916.95
—
$964.95
Trick Flow® Track Max® hydraulic roller camshafts for Ford 4.6L/5.4L 2V modular engines are designed and dyno-tested to ensure maximum performance. These camshafts are manufactured from premium blank cores that are heat-treated to the proper hardness. They're precision-ground to exacting tolerances to deliver enhanced power and proven Trick Flow® performance throughout the engine's powerband.
( 2 )
$974.99
Here's an easy way to convert your stock rear suspension to a coilover suspension. You get everything you need with these QA1 Rear Pro coilover systems, from shocks to nuts and bolts, complete installation instructions, and even decals!
( 104 )
$886.95
—
$955.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
