Availability
Showing In Stock Items. Show All 277 Items.
ARP rugged, black-oxide coated chromoly intake manifold bolts are rated at 170,000 psi. They're precision-machined for optimum thread engagement and have a wide-area flange for better load distribution. They also feature precision-rolled threads, which prevent galling, while promoting more consistent torque loading. These bolts are available with either hex or 12-point heads, and washers are included.
( 395 )
$26.99
—
$50.99
Summit Bucks
Top Street Performance mechanical fuel pumps are constructed of heavy-duty materials for consistent performance and reliability. Available in 2- or 6-valve models with a premium chrome or black finish, each pump features a lower body designed to rotate to meet your fitment requirements. Order the model designed your vehicle with the finish preferred.
( 50 )
$49.38
ARP stainless steel intake manifold bolts are 15 percent stronger than Grade 8 steel bolts and have a wide-area flange for better load distribution. They also have precision-rolled threads, which prevent galling and promote more consistent torque loading. These bolts are both corrosion and heat-resistant and come highly polished. Bolts are available in both hex head and 12-point types, and washers are included.
( 260 )
$27.99
—
$43.99
Designed for NASCAR, these Howards Cams Ultra Lite billet fuel pump pushrods are a necessity for any serious racer using a mechanical fuel pump. They're made from proprietary blended, carbon reinforced, bearing-grade polymer. Ultra Lite billet fuel pump pushrods weigh only 0.9 oz. (27 grams) to eliminate fuel pump cavitation. Gentle on the cam lobe, they can be used with cast or billet cams. These fuel pump pushrods are self-lubricating and super-strong.
( 8 )
$54.99
Summit Bucks
ACDelco GM Genuine Parts fuel filters are GM-recommended replacement components. They help prevent fuel contaminates, such as dirt and rust particles from entering the fuel delivery subsystem, and help keep the engine running properly. These original equipment fuel filters have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
( 2 )
$20.99
Howards Cams fuel pump pushrods are made from premium-grade aerospace chromoly material. They are centerless-ground after heat-treating and are hollow for light weight and fast response. Howards Cams fuel pump pushrods are rated at 170,000 psi tensile strength.
( 33 )
$26.99
—
$46.99
Allstar Performance billet aluminum fuel pump block-off plates offer the right fit and great function at a small price. They're CNC-machined from lightweight billet aluminum and given an anodized coating for long-lasting good looks on your engine block. Allstar includes gaskets and stainless steel fasteners to finish the job right. Do you need to cover that hole where your mechanical pump used to be? Choose the quality and value of an Allstar fuel pump block-off plate, available in a variety of shapes and colors for specific engine applications.
( 40 )
$21.99
UREMCO remanufactured fuel injectors work like new! How so? United Remanufacturing uses the best quality cores and fully cleans the injector bodies, removing dirt, carbon deposits, and grease. Plus, they replace all O-rings, damaged pintles, and filter baskets. These fuel injectors are stringently monitored, inspected, and tested to ensure that they meet or exceed all OEM specifications for optimal performance. UREMCO builds fuel injectors to fit many makes and models, and each and every one ensures consistent spray patterns with dependability, wear resistance, and value. Replace your fuel injectors with like-new remanufactured fuel injectors from United Remanufacturing Company.
( 73 )
$23.50
—
$29.99
For decades, Fairchild Industries has provided top-quality products in extruded rubber, molded rubber, molded plastic, extruded plastic, and elastomer for customers worldwide. Fairchild Industries fuel filler hoses are designed by their in-house automotive engineers who specialize in reverse-engineering products to ensure a specific, high-quality fit, while striving to improve upon the current original equipment manufacturer parts. Available for a selection of vehicles, they are perfect replacements for missing, torn, or damaged OE fuel filler and vent hoses.
( 16 )
$24.99
—
$29.99
Summit Racing™ steel fuel tank sumps can be welded into your stock gas tank to ensure maximum fuel flow to your performance engine. The fuel tank sumps have two threaded outlets to help make plumbing your vehicle easier and more versatile.
( 37 )
$48.99
Engine Works offers lightweight fuel pump pushrods for a variety of applications, including many Chevy small block and big block engines from the 1950s and up. They feature a tubular design with one hardened steel end and one bronze end for use on all aftermarket camshafts. Aluminum rods with brass tips are also available. Select from models designed for use with cast iron or billet steel roller cams.
Not Yet Reviewed
$24.96
—
$29.96
Standard Motor Products replacement idle air control valves help you get maximum fuel efficiency and power from your engine. A properly operating idle air control valve is an essential component to helping your vehicle run flawlessly. These valves are often referred to as idle air control or IAC valves (GM), automatic idle speed or AIS valves (DCX), and throttle air bypass solenoid or AIR valves (Ford). These idle air control valves are used on both throttle body and multi-port fuel injected engines to regulate idle speed. The IAC valves open a small bypass circuit that allows air to flow around the throttle. Increasing the volume of air that's allowed to bypass the throttle increases idle speed. The engine's computer controls the IAC valves, if idle speed is out of range, and commands the IAC valves to either increase or decrease the bypass airflow. Replace your vehicle's worn or malfunctioning idle air control valve with these reliable Standard Motor Products replacement IAC valves.
( 55 )
$28.50
—
$49.99
Edelbrock intake manifold bolts are specifically designed to work with their manifolds, including the Performer, Performer RPM, and Torker series. They feature reduced hex heads for easy wrench access, an attractive cadmium finish for corrosion resistance, and hardened washers. All bolts and washers needed for manifold installation are included in these kits.
( 227 )
$31.99
—
$49.95
Delphi electric fuel pumps are manufactured from high-quality materials. They operate under extreme temperatures and provide your vehicle with quicker engine starts. These fuel pumps are designed to be OE replacements, though universal models are also available. Find the free flow rate, maximum pressure, inlet size, and other options needed for your application. When fuel pressure becomes a problem for your vehicle, order a new Delphi electric fuel pump to restore performance!
( 48 )
$46.99
—
$55.99
These Edelbrock choke block-off plates are designed to seal off the choke tower on the intake manifold. They are made of aluminum and include a gasket and the necessary mounting hardware.
( 33 )
$32.95
Moroso fuel pump block-off plates are designed to block-off the fuel pump mounting boss when a mechanical fuel pump is not being used. These plates are made of anodized blue aluminum or high-luster triple chrome plated steel.
( 60 )
$22.99
—
$32.99
Prevent cam damage from fuel pump lobe wear. COMP Cams has a reputation for being a problem solver. When a high-pressure fuel pump is run with a steel roller cam core, the stock fuel pump pushrod is not compatible with the steel core. You can damage an expensive roller cam as a result of wear at the fuel pump lobe. COMP Cams offers several fuel pump pushrods in response to this problem.
( 76 )
$37.95
Standard Motor Products fuel injectors help you attain maximum fuel efficiency and power from your engine. Properly operating injectors are essential components for enabling your vehicle to run flawlessly. These OEM stock replacements are available for hundreds of specific applications. Don't drive with faulty fuel delivery. Update worn or malfunctioning fuel injectors with reliable models from Standard Motor Products.
( 247 )
$39.99
—
$47.50
These Standard Motor throttle body injection tune-up kits include all of the necessary components to get your throttle body back up and running smoothly. These kits are made to meet or exceed OEM specifications and are available for a variety of applications.
( 43 )
$26.99
When you're switching to an electric fuel pump, CVR fuel pump block-off plates block off the unused port in your engine block where the mechanical pump used to be. These billet aluminum block-off plates are offered in a variety of anodized finishes to complement and coordinate with your engine bay accessories. CVR fuel pump block-off plates come complete with a gasket and stainless steel bolts for an easy installation.
( 39 )
$25.99
Clogged or leaking fuel injectors can have a ripple effect on your vehicle, decrease performance and economy. When it's time to remove a faulty injector, Bosch offers dozens of models designed as OE stock replacements. Choose the fuel injectors recommended for your gasoline or diesel application.
( 13 )
$37.99
—
$40.99
These Fel-Pro intake manifold bolts are constructed from high-quality steel to strict tolerances. Fel-Pro has your fastening needs covered.
( 13 )
$32.99
—
$43.99
Bugs, debris, and loads of dust assault our vehicles' air cleaners on a daily basis. Just as the military protects us, S&B Filters air filter wraps keep harmful enemies to your vehicle's motor at bay. These prefilters are designed to fit individual S&B filters. They have micron sized openings, allowing clean air to easily get through, while keeping sand, dust, and suicidal bugs from their intended destruction. Extend the life and cleaning interval of your cotton filters with S&B Filters air filter wraps.
( 11 )
$29.95
Get super performance from Mr. Gasket! These Grade 5 hex head bolts are black coated plated for protection and appearance. They feature a generous underhead radius for added strength, and hardened flat washers provide uniform torque and prevent galling on aluminum manifolds.
( 4 )
$31.44
—
$49.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
