Availability
Showing In Stock Items. Show All 65 Items.
TCI EZ-TCU automatic transmission controllers are fully configured right out of the box--no tuning is necessary. Simply install them with the included instructions and then start the systems by answering the simple setup wizard questions on the included hand-held unit. They're capable of real-time switchable calibrations, which allows for multiple setups. The multi-shift settings include a full manual mode for using bump or paddle shifters. The TCI EZ-TCU automatic transmission controllers allow for maximum electronic control over shift points, shift firmness, and shift speed. Self-diagnostics enable users of every skill level to fully utilize their capabilities. Be sure to match your particular transmission with the correct EZ-TCU controller, as some models are designed for pre-2009 applications ... and other models are for 2009 and later.
( 37 )
$1,025.95
Injector Dynamics ID1050x fuel injectors are a built-to-spec motorsport injector, offering optimization of critical operating parameters important to you, the motorsport tuner. Built on the evolution of the ID1000 and X Series, these injectors are a drastic improvement over previous series from Injector Dynamics. Order the set recommended for your vehicle. Features include: * Requires only 8 V for consistent operation at 8 bar * Corrosion resistance makes them compatible with all automotive fuels * Compact bodies allow fitment in over 200 applications * Improved internal flow path—without sacrificing low flow performance * Stronger magnetic circuit offers stable operation up to 10 bar * Replaceable inlet filter extends service life
( 8 )
$1,092.00
These Edelbrock Performer LT1 cylinder heads are designed for the 1992-97 LT1 engines. They produce approximately 24 hp more than factory-stock LT1 heads, and raise peak power levels by 500 rpm. They work with stock or aftermarket self-aligning roller rocker arms. These Edelbrock Performer LT1 aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability, plus hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. They offer improved power throughout the rpm range for greater throttle response and top-end horsepower. The intake and exhaust runners are CNC-machine profiled for superior flow and performance.
( 1 )
$1,087.50
Here's an easy way to convert your stock rear suspension to a coilover suspension. You get everything you need with these QA1 Rear Pro coilover systems, from shocks to nuts and bolts, complete installation instructions, and even decals!
( 101 )
$1,056.95
These Strange Pro Race steel front brake kits offer a tremendous weight savings over OEM brake components. The entire 4-piston brake kits, complete with bearings, hubs, rotors, pads, calipers, etc., weigh only 33.5 lbs. They are unsurpassed in detail, as is evident in the hub design. Each hub has one bolt circle. Instead of adding an additional bolt circle, Strange machined five large lightening holes to reduce rotating weight. The billet aluminum hub is further lightened by its scalloped design and fully machined billet aluminum hubcap.
( 28 )
$1,249.99
UMI Performance complete front adjustable upper and lower A-arms were built with this in mind--to offer the strongest manufactured item on the market, while adding great weight savings over the stock piece. UMI Performance complete front adjustable A-arms are built using strong DOM steel tubing, 0.188 in. CNC-machined shock mounts, Moog Problem Solver greasable ball joints, and QA1 XM Endura series rod ends. A-arms can be installed on the stock K-member or any aftermarket K-member. They are designed to reduce front-end weight, as well as "unsprung" weight, providing improved handling performance to the front of your vehicle. Additional features include: * 1.250 in. x 0.120 in. mild steel tubing * TIG-welded 4130 chromoly threaded tube adapters * 3/4 in. hard chrome plated PTFE/KEVLAR® self-lubricating race rod ends * CNC-machined ball joint cups * Grade 8 shock mounting hardware included * Durable powdercoated finish * Use OEM hardware
( 1 )
$1,159.99
Hays Twister Full Race Torque Converters feature a custom-designed anti-balloon plate to stop any converter ballooning and swelling in racing situations. These torque converters are designed for use with a trans-brake and great for power adders such as nitrous, superchargers, and turbos. They're available with various RPM stall speed offerings to accommodate any mixture of modifications—including higher compression ratios, aftermarket camshafts, aftermarket cylinder heads, lower gear ratios, and vehicle weight loss. Additional product features: * All Full Race Series converters are built, tested, and proven to support up to 1,000 hp * Designed to handle the extreme shock and abuse of trans-brakes, nitrous oxide, superchargers, and turbochargers * State-of-the-art spray welding process is used in select areas. Spray welding provides clean, strong, and consistent fusion while also increasing strength through hardening from higher process temperature * Each converter is hand-built and inspected in every step of assembly to ensure top-of-the-line quality * All Hays torque converters are internally welded, compared to brazing. Testing has shown welding provides longer converter life while also enhancing consistency * Heavy-duty Torrington bearings are used for greater strength and durability * Stators are chosen with high-flow vents and channels to promote cooling in heat-producing higher horsepower applications * Increased horsepower and acceleration due to a weight-saving, one-application design. Almost all Hays converters are built for one application to reduce weight, compared to a multi-bolt pattern converter * Full Race Series torque converters are offered in several different stall speeds for popular automatic transmissions.
( 1 )
$1,249.95
—
$1,399.95
BMR Suspension has developed a manual rack and pinion conversion kit that will eliminate bump steer and allow for more header clearance. They started with a clean slate and came up with kits for practically any application, giving you accurate control and steering response. BMR manual rack and pinion conversion kits have a straightforward, bolt-in installation requiring no fabrication or welding. All mounting hardware and installation instructions are included.
( 1 )
$1,009.95
Manufacturer Rebate
RAM Concept 10.5 dual-disc metallic clutch kits usher in a new era of RAM clutch design. The Concept kits introduce modular dual-disc systems with effective performance improvements. Perfected design, better performance, and a competitive price ... what an idea! Designed for use on applications with horsepower rating of up to 1,050. RAM Concept 10.5 dual-disc metallic clutch kits feature: * Higher clamp load 10.5 in. pressure plate offers smooth pedal effort and more surface area to dissipate heat * Poly-coil sprung hub top disc allows for dampening on engagement to eliminate harsh starts and transmission fatigue * Billet modular stands are precision-machined to eliminate distortion and provide a stable platform to house the clutch unit
( 1 )
$1,279.00
Kooks Headers race long tube headers will deliver high performance to your racer. Their full-length race headers are built from T-304 stainless steel and are available in several primary tube and collector diameters to match your application needs. Optimize scavenging and increase power with top-quality Kooks race long tube headers.
( 63 )
$1,222.24
—
$1,388.40
UMI Performance 1993-2002 GM F-Body 3-pt. subframe connectors and torque arm kits provide an easy bolt-on drag race solution for GM F-bodies. These suspension connectors reinforce the chassis and prevent quarter-panel wrinkling from hard launches; a tunnel-mounted torque arm is the proven solution to reduce 60 ft. times. Shortened torque arm improves instant center location; as a result, forward traction is improved. These kits include removable and replaceable NHRA-approved driveshaft loop. Using both parts together dramatically reduces chassis flex. Product features: * 3-pt. subframe connectors reinforce chassis and prevent quarter-panel buckling * Shorter than stock, tunnel-mounted torque arm improves forward traction * Complete kit braces entire underside of car to reduce chassis flex * NHRA approved driveshaft loop (removable and replaceable) * Includes hardware
Not Yet Reviewed
$1,099.99
RideTech RidePro Analog compressor systems use a 3 gallon compressor leveling system with 1/4 inch air valve, manual 4 way switches, and gauges. This 3 gallon tank and single compressor design is recommended for vehicles under 3500 pounds. This system includes a separate aluminum 3 gallon tank, RidePRO air valve block, 1/4 inch air lines, fittings, and wiring. Control your air ride equipped vehicle height with this affordable air suspension leveling system. RidePro analog compressor systems utilizes a high quality solenoid air valve system, manual switches, analog gauges, and dependable electric components to provide simple and reliable air suspension leveling control.
( 4 )
$1,370.00
If you have 1993-1997 Camaro or Firebird and are tired of using the factory pull-style clutch system, RAM Clutches has the solution for you with their single disc push-type conversion Camaro/Firebird clutch kits. Each kit comes with the necessary components to convert your car from "pull-style" to the more conventional "push-style" actuation. The kits come in a choice of either a steel or aluminum flywheel in either a one-piece or two-piece seal configurations, depending on your application. Clutch kit sold separately.
( 1 )
$1,099.00
—
$1,427.00
McLeod hydraulic throwout bearing conversions are designed to convert your vehicle over to hydraulic power. They produce a softer pedal effort, giving you more manageable and smoother clutch operation. Also included are stainless steel braided hoses, steel fittings, an aluminum slave cylinder and a remote reservoir. The McLeod hydraulic throwout bearing conversions use your stock pedal and are easy to install and adjust.
( 14 )
$1,295.00
UMI Performance 1993-2002 GM F-Body Road Race front upper/lower A-arm kits come with boxed lower and adjustable upper A-arms, providing a rock-solid foundation for your autocross, road race, or corner carving 4th Gen. The lower A-arms feature fully gusseted box tubing construction, and while appearing heavy-duty, afford a 5 lb. weight savings per set over factory lower A-arms. They have factory GM pedestal location and are compatible with factory, Koni, and other T-bar, stock mount shocks. Upper arms feature caster and camber adjustment with premium rod ends. Laser-cut ball joint pads feature improved ball joint angle and increased caster (up to additional 2 degrees--varies by chassis) for lowered cars and come assembled with premium ball joints. UMI's GM F-Body Road Race A-arm kits offer the most travel and clearance of any A-arm on the market and is a must for lowered vehicles. Features and benefits: * 0.120 in. wall mild steel box tubing * Double shear sway bar mount with end link set * Double gusset design for flex-free operation * Race-quality high-misalignment rod end on vertical mount * PTFE-lined, high-load capacity race rod ends equal less suspension friction * Uses balance of OEM hardware or use a new UMI hardware kit * Premium ball joints installed * Available with a durable red or black powdercoat * Kit designed to work with the factory K-member, UMI K-members, and virtually all stock mounting point aftermarket K-members
( 1 )
$1,209.99
Nitrous Outlet nitrous oxide plate systems come out of the box ready to deliver superior atomization. They spray up to 200 hp, but are capable of flowing up to 400 hp with additional jetting and a -6 AN main feed line upgrade. You'll get race-proven performance from the unique 6-port discharge design, guaranteeing the perfect mixture of fuel to nitrous. Overview: * Max flow 400 hp * 400+ hp solenoids * Anodized black aluminum plate and bottle (if included) * Wide-open throttle activation switch * Hardware, electric, and jetting included * E85 compatible with different jetting * Jetting included for 50 to 200 hp
( 3 )
$1,092.99
—
$1,413.99
Yukon Gear & Axle ring and pinion and differential combos save time and money by including everything you need in one simple part number. Pro Kits feature a premium Yukon ring and pinion gear set, Yukon Master install kit with high-quality Timken bearings, and required small parts to get vehicles back on the road quickly. The gear and install kits include axle bearings and seals. Many of these combo kits include Dura Grip differentials, depending on application. Order the Yukon Gear & Axle ring and pinion gear and differential combo designed to fit your application.
( 4 )
$1,647.99
USA Standard Gear ring and pinion and differential combos save time and money by including everything you need in one simple part number. Quick Kits feature a USA Standard ring and pinion gear set, Master Install Kit with high-quality Koyo bearings, and required small parts to get vehicles back on the road quickly. The gear and install kits include axle bearings and seals. Many of these combo kits include Dura Grip differentials, depending on application. Order the USA Standard Gear ring and pinion gear and differential combo designed to fit your application.
( 4 )
$1,438.99
—
$1,475.99
UMI Performance offers drag specific front upper/lower A-arm kits for 1993-2002 GM F-body models that are designed to shave weight, reduce friction, and still provide plenty of strength. On the upper arms, UMI's industry leading high clearance geometry tucks into the wheel well—just like stock to afford maximum suspension travel when dropping from a wheel stand. Strong CrMo tube construction and a streamlined ball joint plate combined with high-strength aluminum racing rod ends save one half pound per side over the stamped stock arms. The lowers feature CrMo construction and UMI's newly redesigned tube configuration ensures performance and safety, whether you're landing a wheel stand or powering through the traps at 160+. They accept most major brands of racing coilovers with the 1/2 in. x 1 1/4 in. wide mount. There are provisions for a travel limiting chain and also an optional sway bar tab for light street use. These arms save 5 1/2 lbs. per side, come assembled with premium ball joints, race quality rod ends and are ready to bolt on. Product features: * Direct bolt-in for 1993-2002 GM F-body vehicles * Total weight savings of 11 lbs. * Additional caster with relocated upper ball joint pad: +2 degrees * 1 1/4 in. USA CrMo tubing * Heavy-duty aluminum racing rod ends in uppers * Race quality rod ends in lowers including high misalignment rod end on rear strut * Uses racing industry standard 1/2 in. shock mount, up to 1 1/4 in. wide * Maintains factory track width * Heavy-duty double reinforced ball joint cup * Sway bar mount installed—use optional sway bar end links (P/N 2649) * Limiter chain mount installed * Factory ball joints installed * Available in durable red or black powdercoat finishes * Optional A-arm hardware kit (P/N 2301) includes Grade 10.9 bolts, washers, and Ny-lock nuts—everything needed to mount A-arms
Not Yet Reviewed
$1,199.99
UMI Performance complete front upper and adjustable lower A-arms were built with this in mind--to offer the strongest manufactured item on the market, while adding great weight savings over the stock piece. UMI Performance front A-arms are built using strong DOM steel tubing, 0.188 in. CNC-machined shock mounts, Moog Problem Solver greasable ball joints, and QA1 XM Endura series rod ends. A-arms can be installed on the stock K-member or any aftermarket K-member. They are designed to reduce front-end weight, as well as "unsprung" weight, providing improved handling performance to the front of your vehicle. Additional features include: * 1.250 in. x 0.120 in. mild steel tubing * TIG-welded 4130 chromoly threaded tube adapters * 3/4 in. hard chrome plated PTFE/KEVLAR® self-lubricating race rod ends * CNC-machined ball joint cups * Grade 8 shock mounting hardware included * Durable powdercoated finish * Use OEM hardware
( 1 )
$1,029.99
Nitrous Outlet EFI dual-nozzle systems deliver the nitrous in two locations for improved atomization over a single-nozzle system. Designed to work with any late model vehicle, these systems include everything needed to add up to 150 hp to your vehicle--hardware, wiring, jetting, solenoids, hoses, and two 1/8 NPT nozzles. They also include a wide-open throttle (WOT) switch that only allows the systems to be activated when the motor is at full throttle. This feature will help in preventing engine damage and lean spikes. These complete race-proven Nitrous Outlet systems have quality components for extreme performance.
Not Yet Reviewed
$1,225.99
—
$1,263.99
With a goal of changing the marketplace, Excess Injectors intends to create the best tested, matched, and most accurate performance fuel injectors in the world and become the new standard for performance injectors. When you purchase a set of Excess injectors, you also gain access to the Exact Match Data app. This app allows you to unlock the full potential of your injectors by providing access to comprehensive testing and matching data, including data downloads for HP Tuners and more. With over 20 years of experience, they continue to help you build better, faster, more powerful and fuel efficient vehicles. Take your ride's performance to the next level with the Excess Injectors fuel injectors best suited for your application. Product features, items, and specifications include: * Tracking app features over 6,500 measured flow points on each injector * Measurement of flow slope done with 1,200 recorded flow samples * High flow slopes matched within one percent in every set * Dead times matched within two percent in every set * Cloud server access allows you to see how tightly matched your specific set is, flow profiles, and each injector's testing parameters for full disclosure
Not Yet Reviewed
$1,568.00
Change the look of your vehicle's interior with these Summit Racing™ seat and bracket Pro Packs. They include a pair of Scat seats with a reclining lever, seat brackets, and adjustable sliders for a complete bolt-in installation. The side bolsters and high density molded foam cushions provide a great ride and help you get more comfortable in your vehicle. Available in your choice of vinyl or velour, the Summit Racing™ seat and bracket Pro Packs will make excellent additions to any vehicle.
( 98 )
$1,200.96
Separate and specific, a setup just for your nitrous--dedicated fuel systems from Nitrous Outlet. A fuel enrichment system devoted to your nitrous removes the strain from your vehicle's stock system and gives you more control. These dedicated setups come with custom-built, lightweight, high-density plastic or heavy-duty, hand-welded aluminum fuel cells. A fuel pump, regulator, hose, fuel lines, and fittings complete the systems. Just about all of them are compatible with high or low fuel pressure by changing a spring inside of the fuel regulator, and they require no modifications to install. Create a distinct setup for your nitrous with Nitrous Outlet dedicated fuel systems.
( 1 )
$1,515.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
