Availability
Showing In Stock Items. Show All 41 Items.
Holley Sniper EFI HyperSpark distributor kits were designed to make upgrading your ignition on a Sniper EFI-equipped engine simple. When installed concurrently with a new Sniper EFI system, the combination creates the easiest way to install EFI conversion on the market—and only four flying lead connections are required! The harness only requires one connection to a switched power source, battery positive, battery negative, and fuel pump power. The pre-terminated connectors and a built in 40A relay provides power to all of the components within the system. With the included Sniper EFI main harness you no longer need to run multiple wires to provide switched power for each individual component, which not only helps prevent wiring confusion, but it will also speed up your install time and clean up your engine bay. Simply route the harness and pre-terminated connectors to your HyperSpark coil, distributor, and ignition box and plug them in. Available for all popular engine combinations, these kits come with a distributor, coil, ignition box, and an integrated Sniper EFI harness. Order the application you need. Key features: * Plug-and-Play Sniper EFI main harness replaces the standard Sniper EFI harness with four loose leads, battery positive, battery ground, switched 12 V, and fuel pump power, for a simple and streamline installation * Designed for existing or new Sniper EFI installations (the HyperSpark Master Kit harness retains the same flying lead wire colors as the Sniper EFI main harness; new installations will not use the Sniper EFI standard harness or coil driver * Complete ignition system in a box, including: HyperSpark ignition box, HyperSpark ignition coil, HyperSpark distributor (for your application), and a plug-and-play main harness * HyperSpark distributors feature a Hall Effect crank trigger sensor providing a noise-free rpm signal to the Sniper ECU * Patented clear installation cap eliminates any confusion while installing the distributor * HyperSpark CD ignition box is seal and powder coated to be installed in the harshest of locations * External LED on HyperSpark CD Ignition box helps verify 12 V, cranking rpm, and low battery voltage * 135mJ of spark energy when used with the HyperSpark ignition coil, ensures complete combustion * Integrated ignition coil bracket simplifies mounting the Ignition coil * Ignition coil connector removes any doubt of loose connections at the Ignition coil * Enables timing control on a Sniper EFI Installation
( 21 )
$999.95
On Sale
When it comes to late model performance parts, nothing beats bolt-on and direct connection components—especially when they improve performance like these new replacement MSD Blaster ignition coils. They're designed with improved materials and windings to produce a stronger spark. This improved spark helps burn the fuel mixture more efficiently, resulting in smooth idle and heightened mid-range rpm power. Choose the OEM replacement designed for your year/make/model application.
( 619 )
$78.55
On Sale
Tune-up your entire ignition at once with Summit Racing™ Volt Max X-TREME spark plug wires, cap, and rotor kits. They're made to handle extreme conditions while perfectly matching OEM specs. The ultra-low resistance wire core is wrapped in a high dielectric capacitance jacket to keep voltage directed to the plug, and is protected by a tough silicone outer jacket. Stainless steel terminals (solid brass for Ford D.I.S. applications) with hardened, positive snap-locks ensure a permanent connection, and the silicone boots can handle up to 450 degrees F of heat. The wire sets include dielectric grease to seal terminals and boots, plus wire separators (a must if your OEM wire are 7mm). Select the tune-up kit designed for your vehicle.
( 151 )
$70.98
$58.98
—
$63.88
On Sale
ACCEL Mopar Remote Super Coils provide increased performance for Dodge trucks and Jeeps. You get quicker starts, improved idle, crisp throttle response, and higher top rpm power. These coils are compatible with Mopar J-TEC computer-controlled ignitions and are direct bolt-in units.
( 102 )
$78.85
$59.14
On Sale
Simplify your tune-ups and keep them budget-friendly with our Summit Racing™ cap and rotor kits. These affordable kits are molded from premium materials and have brass or aluminum inserts depending on application.
( 372 )
$32.99
Crown Automotive distributors deliver accurate trigger signals. When it's time to improve your ignition system, you can rely on Crown for quality direct-fit replacement parts. These distributors are constructed of cast aluminum housings and steel gears, magnetic or points-style triggers, and most have caps included. Hook one up to deliver the voltage from your coil to the spark plugs for reliable ignition!
( 18 )
$108.99
—
$125.99
On Sale
ACCEL distributor caps are the best way to help improve ignition. The compression-molded caps are stress-relieved immediately after molding to ensure stability of the 60,000 V alkyd high-performance compound. Brass inserts provide for high spark energy flow. These heavy-duty ACCEL distributor caps provide maximum energy to your engine. They're available in a variety of styles for a wide range of vehicle application.
( 49 )
$32.85
—
$32.87
The little devil in you will enjoy tormenting the competition with Davis Unified Ignition extreme Screamin' Demon coils. They allow you to widen your plug gaps up to a whopping .065 in. You get an intense spark through the entire rpm range to keep you "screaming" down the road without a loss of power. And your spark plugs stay cleaner longer! The brass terminals of these coils are more conductive than stock aluminum and resist corrosion longer, too. Demon coils are hot stuff and you'll need a better-than-stock set of wires to deliver that hotter spark to your plugs. So, turn up the heat on performance with Screamin' Demon coils from Performance Distributors.
( 213 )
$79.99
On Sale
MSD Pro-Billet Dual Sync EFI distributors feature high-quality dual Hall effect sensors, a QPQ coated precision billet shutter wheel, and distributor shaft that's guided by a sealed ball bearing. They also include a race-proven distributor gear, and a performance cap and rotor. The distributors are designed for use with Holley EFI systems; they may also fit other systems requiring a Hall effect sensor. Order the model recommended for your vehicle and engine application. (Note: an ignition adapter is required when Pro-Billet Dual Sync EFI distributors are utilized with Sniper EFI.) Features, specs, and parts may include: * CNC-machined billet aluminum housing * Precision-machined shutter wheel designed for improved accuracy at extreme engine rpm * Plug-and-play with Holley EFI * Can be used to trigger popular TBI fuel injection systems * Hall Effect sensor design provides precise timing control and noise immunity * Integrated LEDs allow for easy setup * Shutter wheel is pinned and welded to distributor shaft for superior reliability
( 17 )
$579.95
$318.95
—
$499.95
On Sale
ACCEL Truck Super tune-up kits have it all! Everything that you need to super-tune your pickup, van, or SUV is in there, including a custom-fit wire set, a distributor cap and rotor, and C-Cut performance spark plugs. Most kits include the 8mm Extreme 9000 wire sets, which feature a low-resistance Ferro-Spiral core and heat-reflective coated spark plug boots rated to 1,200 degrees F. Some inline 6-cylinder applications use the 5000 Series wire sets where extreme heat is not a problem. The distributor cap and rotor are precision-molded from impact-resistant, high-dielectric strength compounds and have brass or copper inserts (depending upon your application) and stainless steel contact springs. In addition, the race-proven C-Cut performance spark plugs deliver maximum burn efficiency for improved performance and reduced emissions.
( 178 )
$262.95
$117.95
—
$144.95
Cardone new distributors offer OE fit and form, built better! Cardone has seen where and why parts fail, so their new distributors are built with technology and design—plus, they're 100 percent computer-tested for guaranteed, long-lasting performance. Cardone also knows that a part has to look good, so their distributors are appearance-inspected for complete satisfaction. New distributors include the cap and rotor to make your installation a snap. For quality and reliability backed by nearly a half-century of experience, order the Cardone new distributor designed for fitment on your vehicle.
( 200 )
$99.99
—
$108.99
On Sale
ACCEL distributor rotors are the perfect replacements for stock rotors to help ignition systems fire reliably. ACCEL distributor rotors feature high conductivity, corrosion-resistant brass terminals, and stainless steel rotor springs for unrestricted spark energy flow. Pick up a new ACCEL distributor rotor and make your distributor happy.
( 20 )
$19.70
Do you need more firepower? Davis Unified Ignition Jeep Firepower ignition kits have the components that you need to make your Jeep an energy machine! They start with the Screamin' Demon coil--the name says it all. These coils allow you to open up your spark plug gaps a whopping .065 in.! A larger gap means more spark in the combustion chamber, and that equates to a more complete burn of the fuel mixture, increasing horsepower, gas mileage, and keeping your plugs cleaner, too! And, you'll experience no drop in power when you hit the accelerator, like you do with notorious stock coils. To ensure that every ounce of this high-powered energy gets to your plugs, a set of LiveWires is included. The LiveWires are custom-fit, precut, and numbered at each end for the correct cylinder. They feature space-age, heat-resistant sleeving to handle extreme underhood temperatures. Some Jeep kits, depending on the application, include brass terminal caps and rotors as well. Give your ride the added power it was built to handle with Performance Distributors Jeep Firepower ignition kits.
( 8 )
$219.00
—
$229.00
Mopar Replacement distributor caps are genuine parts you can count on to supply the OE fit and function you're expecting. Manufactured for quality materials, they offer the perfect choice to repair and maintain your Mopar ride with renewed energy to spark performance.
( 2 )
$30.99
—
$42.99
Standard Motor Blue Streak distributor rotors have solid brass segments for better conductivity and higher-voltage spark to the plugs. Exclusive designs and extra material thickness in "well area" provide added security against voltage punch-through. As a global manufacturer of OE ignition products, Standard Motor maintains complete quality control throughout the entire manufacturing process from the componentry to the finished product. Select the SMP Blue Streak distributor rotor designed for your application needs.
( 24 )
$9.99
—
$14.93
Spark some energy with Crown Automotive distributor rotors. It's bad news when the coil sends the voltage, the rotor spins, it passes the contacts, and ... nothing happens. Perhaps a tune-up is in order. Crown replacement parts are a great choice to get your vehicle firing again is. These quality rotors have brass terminal contacts and bring the ideal fit to your application. Distributor rotors are available for a wide range of vehicles.
( 4 )
$4.99
—
$7.99
If you're experiencing rough engine idle, Crown Automotive distributor ignition pickups may cure your ills. Your pickups spin within the distributor, determining the firing order of your spark plugs. Because the fuel injectors are not firing properly, you may experience engine stalling or an inability to accelerate smoothly. Crown has OE-style replacement components for your maintenance needs.
( 2 )
$33.99
—
$34.99
OMIX-ADA distributor switch plates will properly advance or retard spark to keep your Jeep's performance at its best. OMIX-ADA replacement plates are quality-made to provide you with a direct fit and the original function that you expect.
( 1 )
$72.99
Is it time for a tuneup? Replace your distributor's worn-out cap with a new one from Standard Motor Products. Why take chances with old, questionable, or faulty ignition components that can leave you stranded? Standard Motor replacement distributor caps are designed to exceed OEM specifications for dependable, maintenance-free operation. Order the model designed for your specific vehicle application.
( 111 )
$15.99
—
$23.99
A large number of Crown Automotive distributor replacement parts are available to the home or shop mechanic. Whether you are looking for a new stator, vacuum advance or control, or a switch plate, Crown can satisfy your automotive needs.
( 2 )
$37.99
All gears have the possibility of eventual damage to the teeth. When it comes time to replace the distributor gear due to damage or the need for a different material, check out Crown Automotive distributor gear replacement roll pins to securely hold it in place for the long haul. The pins are designed and built to OEM specs for excellent fit and reliable performance. The next time you replace your vehicle's distributor gears, remember to order Crown Automotive roll pins to help complete the job.
( 1 )
$1.99
When restoring your Jeep, having the right components under the hood is as important as having them on the exterior. OMIX-ADA replacement distributors are available for a number of Jeep applications. These distributors are precision-crafted to meet strict specifications in new remanufactured styles. OMIX-ADA distributors will fit and perform as great as the originals!
( 21 )
$197.99
Whether it's time for a tuneup or you simply want to change color schemes under the hood, Crown Automotive distributor caps are the way to go. These OE-style caps make for easy replacement, providing fresh points for excellent spark. They are available for different styles and motors. Keep your spark and engine compartment looking sharp with Crown Automotive distributor caps.
( 3 )
$9.99
—
$10.99
Summit Bucks
Delphi ignition coils will definitely spark a response! Precise spark timing offers increased fuel economy and faster crank-to-run. These coils provide accurate electrical energy to create a voltage potential at the spark plug—and that provides you with superior engine performance, better control over emissions, and fuel economy. You'll get the OE performance, durability, and electromagnetic capacity level that your vehicle requires with Delphi ignition coils. Order the model designed for your vehicle application.
( 78 )
$28.99
—
$39.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
