Availability
Showing In Stock Items. Show All 44 Items.
Dayco standard heater hoses carry the heated coolant from the engine block to the heater core under the dashboard, and return it to the engine. They're made for general service on light trucks and passenger cars. The ultra-durable hoses are constructed using all EPDM compounds, with spiral reinforcement for high burst strength and heat resistance of -40 degrees F (-40 degrees C) to +257 degrees F (+125 degrees C). These black cover hoses are similar to the SAE 20R3, Class D-2, and are specifically designed to be compatible with all common coolants and coolant additives. However, they are not suitable for fuel or oil transfer. Dayco heater hoses are available in a variety of diameters and lengths.
( 42 )
$44.99
Avoid a potential mishap from a leaking or a blown heater hose--make an upgrade to Continental OE Technology Series HY-T black heater hoses. The HY-Ts are perfect for applications where excellent resistance to antifreeze coolants and extreme underhood temperatures is required. The tube and cover are manufactured from EPDM (ethylene propylene diene monomer) rubber with superior resistance to heat, ozone, and chemical coolants. Each hose is then reinforced with 2-spiral synthetic for additional strength and durability. Continental OE Technology Series HY-T black heater hoses are constructed to meet specifications similar to SAE J20R3--so they can take the heat.
( 36 )
$38.99
—
$55.99
Russell speed bleeders let you bleed the brake lines on just about any vehicle all by yourself. Just replace the old bleeder screws with speed bleeders. They have an internal check valve that will pump excess air and fluid out for you. A special coating on the speed bleeders' threads keep them from admitting air into the system, and keep expelled air and fluid out. When you're done, just tighten the screws and go on to the next brake cylinder.
( 260 )
$15.95
Dorman offers a broad spectrum of parts for automotive repair and maintenance, including brake hose locks. These brake hydraulic hose lock clips are constructed from quality material for lasting durability against harsh road and weather conditions. They are designed for use in effectively securing brake hose to the vehicle. Drive with confidence with Dorman brake hardware components.
( 13 )
$6.99
Clearance
Resistant and resilient, Edelmann power steering return hoses won't fail you. These replacement hoses are impervious to oil, heat, and ozone which cause ordinary assemblies to fail prematurely. Their tube construction will withstand internal oil temperatures of up to 300 degrees F. The hoses are assembled with zinc-chromate plated couplings and fittings for protection against rust and corrosion. Restore your vehicle's power steering with fresh Edelmann return hoses—available for fitment on countless makes and models spanning more than a half-century.
( 60 )
$18.99
—
$87.99
These Dorman brake speed bleeder screws are designed to make bleeding your brakes easy. The internal check valve allows you to back the screw out, pump the brakes to bleed out old fluid or air, and then retighten them to complete the job. No air can come back into the system and, best of all, it is easy to do by yourself. You won't have to wait for someone else to help or need expensive tools any longer. Take the headache out of bleeding your next brake job with these Dorman brake speed bleeder screws.
( 40 )
$12.99
If you have a hole in your radiator hose, replace it with Dayco flexible radiator hoses. Designed to replace straight or molded radiator hoses, these precision-corrugated hoses feature knitted reinforcement and synthetic EPDM construction combined with an inserted helical steel coil spring. The Dayco design provides excellent flexibility without flattening or collapsing, as well as the ability to resist splitting, ballooning, environmental elements, coolants, and temperature changes. Dayco flex radiator hoses are available in a selection of sizes to keep your coolant flowing.
( 164 )
$16.99
Continental molded radiator hoses are pre-shaped for specific applications and are constructed to original equipment manufacturers' specifications. They're molded to provide full flow-through tight bends, ease of application, and stress relief on radiator connections. Their tough Versigard rubber tube and cover resist heat, ozone, and chemical coolants—and their Tylanar-knit reinforcement provides burst limits exceeding SAE standards. These hoses meet or surpass SAE J20R4, D1 specifications. Hundreds of models are available for fitment on a wide range of vehicles. Order the length, diameter, and shape designed for your cooling system. When it's time for a replacement, make Continental your first choice for molded radiator hoses.
( 443 )
$20.99
—
$37.99
Bleed your brake system with these Dorman brake bleeder screws. They're designed to mount into your OEM caliper and will clear all stock components. Available for passenger cars, trucks, and SUVs, the Dorman brake bleeder screws allow for the fast, easy bleeding of your brake system.
( 12 )
$3.99
—
$4.99
Dorman transmission line connectors are designed to thread-in your automatic transmission case and allow you to connect to an external cooler. They're manufactured from high-quality material that meets or exceeds OEM standards. Available in different thread sizes and configurations, Dorman transmission line connectors will help get you connected. Order the adapters compatible with your application.
( 17 )
$9.99
Continental heater hose E-Z coils make creating your very own molded hoses a breeze. These E-Z coils maintain a consistent I.D. through a 90 degree bend, eliminating the need for a custom-molded hose. When it comes to saving time and money, Continental has you covered with their E-Z coils.
( 5 )
$12.99
Bleeding your brakes is critical in keeping your ride in top performance. Dorman brake bleeder screw assortments allow you to do just that. They are made of high-quality materials and are a sure way to make bleeding your brakes a breeze. Screw assortments contain two of each of the following sizes: * 1/4-28 in. x 15/16 in. * 5/16-24 in. x 1 in. * 3/8-24 in. x 1 1/4 in. * M10-1.0 x 35mm * M10-1.5 x 30mm
( 4 )
$11.99
Sunsong offers power steering hose assemblies for thousands of vehicles from the 1950s and up. The OE replacement hoses are available in a variety of materials and configurations, both in high-pressure and low-pressure options. If you've notice squealing or poor performance when you turn the wheel, you may have a worn hose leaking fluid. Maintain your system with the hose assembly recommended for your application.
( 60 )
$6.99
—
$65.99
Summit Bucks
ACDelco offers a wide variety of hoses to get your vehicle back on the road. Whether you need to replace fuel, coolant, oil, or vacuum hoses, you can count on ACDelco Gold parts to deliver OE fit and performance. Order the replacement hoses recommended for your application.
( 1 )
$70.99
These Standard Motor Products ported vacuum switches are designed to open and close the vacuum signal path with changes in coolant temperature. These switches can be used to control vacuum-activated components on your ride.
( 12 )
$43.99
Motorcraft fuel rail pressure relief valves are OEM replacements for your Ford, Lincoln, or Mercury vehicle. These shrader-style valves can be used for pressure checking, purging air from the system, and even introducing injector cleaner into the system, so it is important that it remains functional.
( 3 )
$10.99
Dorman has you covered when it comes to the hardware that you need for your ride. They offer these washers for many uses and applications to suit your needs.
( 2 )
$3.99
—
$8.99
Clearance
If you're working on a late model vehicle with fuel injection, then you're going to need some of these Dorman fuel line retaining clips. Usually the factory ones break when disconnected, or they don't go back together easily. Dorman has come up with these fuel line retaining clips to solve the problem. They are available for different sizes of fuel lines and feature different connections for your specific style of connector.
( 24 )
$5.99
On Sale
Mishimoto silicone radiator hoses combine factory fit with modern finish and performance. These trimmable hoses are constructed from 5-layer silicone with heat-resistant fibers for strength and longevity. The hoses are available for many vehicle-specific applications, manual and automatic. Finish your project with these high-quality radiator hoses from Mishimoto.
( 18 )
$71.95
$64.76
Clearance
Continental heater hoses are designed for vehicles that need custom-routed heater hoses. They meet or exceed SAE J20R3, D1 specifications, so they'll stand up to the heat. Continental heater hoses use rugged construction; most are manufactured from Versigard rubber—a compound highly resistant to heat, oil, and weather. Their patented knit reinforcement is typically made with Tylanar fabric, a material that also meets the safety requirements. Some models incorporate other high-grade materials, as well. Continental heater hoses are available in a variety of diameters and lengths compatible with numerous of makes/models.
( 10 )
$8.99
—
$20.99
Clearance
Keep the hot coolant circulating with molded heater hoses from Dayco. These hoses are constructed from synthetic EPDM for high-strength and resistance to oil, salt, mud, debris, coolants, and environmental elements. The inner base tube of Dayco molded heater hose is reinforced with knitted rayon for maximum strength and burst-resistance. They eliminate the need for multiple connections of hoses and clamps. Dayco hoses are specifically designed for your application to ensure proper fit and function.
( 105 )
$18.99
$10.50
Clearance
Dorman keeps your brake system connected with their wide selection of OEM replacement brake hoses. These rubber hoses deliver increased performance and reliability and are available for most specific vehicle applications. Dorman brake hoses are fully assembled, and those with banjo end fittings include new copper washers to ensure proper sealing. All hoses are tested up to 4,000 psi to ensure that safety standards are met. Don't wait for your hose to bulge or burst--order Dorman hydraulic brake hoses for consistent performance from your brake system.
( 290 )
$28.99
$14.50
Clearance
Sunsong offers replacement brake hoses for thousands of vehicles from the 1940s and up. Nearly all are assembled with various hose end attachment options. These rubber brake lines are available in countless lengths for dozens of positions on your vehicle. Order the configuration recommended for your application.
( 28 )
$14.99
—
$22.99
Sunsong offers power steering fittings for thousands of vehicles from the 1950s and up. They're available in a variety of sizes, angles, and configurations. The return line end fittings are designed to OE specs for a factory-style fit. Whether you're repairing a leaky line or updating your power steering, these fittings are effective partners with both high- and low-pressure hoses. Order the model recommended for your application.
( 3 )
$5.99
—
$16.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
