Availability
Showing In Stock Items. Show All 72 Items.
Spanner wrenches are a must-have tool for adjusting your coilover shock absorbers. RideTech's wrenches grip the retainer under the spring to spin it and adjust the coil spring up or down. By loosening the small bolt holding the collar, you can turn it with the wrench; no need to unbolt the top of the shock. Correct adjustment of the coil spring preload is a critical step toward improved suspension and handling. RideTech machined spanner wrenches can be used manually or as an attachment on your 3/8 in. ratchet.
( 16 )
$20.00
RAM billet steel alignment tools are precision-machined for perfect alignment of clutch discs. These specialty tools feature an open backside that allows the clutch pack to be progressively loaded without having to juggle all of the parts when performing the clutch install. Tool models are available to service a variety of pilot and shaft diameters, as well as input spline quantities. This is a must for installing any dual disc clutch unit.
( 53 )
$49.00
SuspensionMAXX Super T torsion bar unloading tools are must-haves for anyone modifying or servicing light truck suspensions. These heavy-duty tools feature super-strong steel construction, a knurled placement tip for improved grip, a counter hex for improved effectiveness, and coarse threads to get the job done quickly.
( 12 )
$169.95
These SPC Performance truck/SUV ball joint presses are designed to remove old, worn-out ball joints and install new ones. They feature a forcing screw press and adapters that can easily install all press-in style ball joints. The presses include a handy plastic carrying case that is perfect for storing them when not in use.
( 3 )
$206.99
Yukon Gear & Axle inner axle side seal installation tools ease the frustration of getting your axle seals aligned properly. Having the right tools makes any job easier, and not having them can make the job miserable, if not downright impossible! These specially designed tools are simple to use. So, un-complicate the installation of new seals on your Dana axles with the right tools--Yukon Gear & Axle inner axle side seal installation tools.
( 9 )
$221.99
McGard's spline drive lug nut sockets are must-haves when using McGard's spline drive lug nuts to keep your wheels on your ride, where they belong. These sockets have a no-compromise patented design that's engineered to fit small-diameter recesses in new tuner-style wheels.
( 24 )
$13.99
—
$21.99
Summit Bucks
These Performance Tool spindle nuts wrenches make quick work of stubborn spindle nuts. These wrenches feature chromoly steel and black oxide sockets that fit most 2WD and 4WD light truck applications.
( 57 )
$14.99
—
$31.99
Astro Pneumatic Tool Company Subaru ball joint pullers are perfect for pulling difficult to remove, seized, rusted, and/or corroded bolt-in Subaru ball joints. They're designed for easy use with vehicles on jack stands using a deep 24mm socket and impact or hand wrench or use included 5/8 in.-18 thread adapter with any common slide hammer. Their unique sliding pin, non-rotating design removes ball joints in a single pulling motion without spinning the ball joint stud, reducing the chance of ball joint breakage.
( 4 )
$32.99
Summit Bucks
Safely unload torsion bar keys for replacement or adjustment with Performance Tool torsion bar unloading tools. These premium tools feature a larger C-frame opening to accommodate beefier torsion bars and are engineered to handle GM's K-3500 series trucks with heavy-duty chassis and larger torsion bars. The torsion bar unloading tools are manufactured from heavy-duty forged steel with larger 7/8 in. diameter threaded screws.
( 20 )
$42.99
Manufactured by Excel from Richmond, these axle seal installation tools are designed to safely and evenly apply pressure to the inner axle seal to press it into the axle housing without damaging the seal. The different inner and outer diameters of the puck part of the tool press can be used on many different seals. This superior quality tool provides more efficiency to save you time and is available in several models to work on a broad range of applications, including Dana 30, 44, 50, 60 and Dana 44 ICA. Choose the axle seal installation tool in the model designed for your application needs.
( 1 )
$79.99
Are you replacing worn ball joints? Don't worry--Moog ball joint tools are there to help. Moog designed these tools with the professional mechanic and DIY specialist in mind. Don't struggle with lesser tools, trust the same Moog ball joint tools that the professionals trust.
( 3 )
$38.99
Whether you're setting up ring and pinion gears or doing general differential repair, do it with Yukon Gear & Axle carrier bearing pullers. These tools work with an impact gun to quickly and safely remove your carrier bearings while minimizing the risk of damage. These pullers come with a handy bench top-stand and work on most standard size carrier bearings and pinion bearings on differentials. For all of your drivetrain needs, use Yukon Gear & Axle!
( 5 )
$636.99
—
$769.99
Centerforce clutch alignment tools are designed to align the flywheel and clutch disc for the trouble-free insertion of the input shaft. They're available for a wide variety of applications.
( 75 )
$7.95
TeraFlex lower ball joint preload adjusting tools enable you to easily to adjust the lower ball joint preload amount. This preload tool is a must have for your new or broken-in TeraFlex HD ball joints.
( 1 )
$14.99
There are many steps in setting up a new ring and pinion, and none should be taken lightly. When it's time to set up the pinion preload, you'll appreciate the assistance of Yukon Gear & Axle pinion yoke holders. These specialty tools firmly hold the yokes in place and are compatible with almost all differentials. Yukon Gear & Axle pinion yoke holders make setting pinion preload settings a much easier process.
( 2 )
$174.99
Allstar Performance rear main seal adapter alignment tools are used to install adapters in order to convert a one-piece rear main seal on 1986 or later Chevy small blocks to the old-style, 2-piece rear main seal so that a pre-1986 crankshaft can be used. These alignment tools allow for a quick and easy adapter installation.
( 4 )
$74.99
Yukon Gear & Axle setup bearings easily slip on and off the pinion journal to allow for pinion depth adjustment. These setup bearings ensure you have the proper tolerances needed and are a great addition to your toolbox!
( 3 )
$121.99
—
$182.99
OTC's sockets are made from high strength steel and are designed to resist rounding out. Most OTC sockets can be used with an extension and a torque wrench. Available for many applications.
( 19 )
$45.99
—
$59.99
These 30mm OTC injector sockets ensure proper fit during nozzle removal and installation. OTC manufactures these sockets with a 3/8 in. square drive and the 7/8 in. hex permits easy access in tight areas.
( 2 )
$66.99
Yukon Gear & Axle differential bearing preload tools, spanner wrench, and side adjusters are all constructed from high-quality materials and have simplistic designs to make your life easier when you're working on multiple different vehicle applications. Whether you're looking for bearings, differentials, or side adjustment, Yukon Gear and Axle has you covered.
( 9 )
$114.99
—
$172.99
Lisle exhaust manifold spreader tools are designed to provide you with a simple way to expand a warped manifold so that all bolt holes are accurately aligned and to help prevent the cross-threading of your manifold bolts. They are adjustable and made of high-quality steel to ensure long-lasting durability for repeated shop use. If you're looking for a pair of high-quality exhaust spreader tools, Lisle has you covered.
( 7 )
$12.99
Yukon Gear & Axle differential carrier shim installation drivers are amazingly self-explanatory. They help you install carrier shims on the differential carrier. The tools include five different size shims, so they can be used on a variety of Ford, GM, Mopar, or AMC differential carriers.
( 4 )
$200.99
Dorman offers a broad spectrum of specialty tools for repair and maintenance on your vehicle, including these precision-made clutch alignment tools. These alignment tools properly align the clutch disk between the pressure plate and the flywheel, before pressure plate is bolted down, for trouble-free clutch alignment and installation.
( 5 )
$3.99
Install your ACT clutch kit easier and more accurately with the proper ACT clutch alignment tools. These alignment tools will make quick work of centering the clutch disc and keeping it stationary with the flywheel as you install the pressure plate over it. Make your clutch installation simple and precise using ACT clutch alignment tools.
( 44 )
$4.00
—
$6.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
