Availability
Showing In Stock Items. Show All 31 Items.
When your engine refuses to turn over, it could be time for one of these Motorcraft replacement starter solenoids. Made to fit, they plug directly into the starter circuit and are designed to activate your motor, push the starter Bendix gear into the ring gear, and deliver quality performance. Motorcraft starter solenoids offer the best fit for your Ford, Mercury, and Lincoln vehicles.
( 39 )
$29.99
Summit Racing™ offers run stand starter adapters for a variety of engine applications—including Ford and Mopar motors from the 1950s and up. Many times, troubleshooting and/or tuning an engine is easiest when the engine is outside the car on a test stand. This allows you to access locations of the engine which are nearly impossible to reach otherwise. The starter adapter enables you to mount the starter to the engine in order to monitor and diagnose issues while the engine is running. Order the adapter recommended for your particular engine.
( 8 )
$26.99
ACDelco starter solenoids are a recommended replacement for your vehicle's original solenoid. They relay the electrical current to the starter motor to start your vehicle's engine. ACDelco starter solenoids have been manufactured to fit your vehicle and provide the same performance, durability, and service life you expect from ACDelco.
( 1 )
$25.99
South Bend Clutch starter shims will help to properly mate your diesel's starter, flywheel, and transmission. These aluminum starter spacers include bolts and are available for NV4500 and Getrag transmissions. Engage your clutch; South Bend Clutch starter spacer/shims will make sure the ring gear makes contact with the starter.
( 2 )
$46.42
Simplify the installation of the starter in your race car with these Custom 450 stainless steel starter bolt kits from ARP. They feature smaller diameter heads to make accessibility more convenient. They're rated at 180,000 psi--stronger than OEM--and are specially suited for cars that use rear motor plates.
( 151 )
$20.99
—
$24.99
These Powermaster starter bolt kits are a must when installing a starter. They include two shims that you may need when installing your new starter to ensure a proper gap between the starter and flywheel. The bolts are made from high-strength steel and are chrome plated for corrosion protection.
( 20 )
$25.79
Don't take chances with an old, questionable, or malfunctioning starter solenoid that can leave you stranded. Standard Motor Products replacement starter solenoids are designed to exceed OEM specifications for accurate, maintenance-free operation. Trust your vehicle's electrical starting system needs to Standard Motor Performance.
( 25 )
$22.99
—
$51.99
These Powermaster replacement solenoids are a direct replacement for your Powermaster starter. If you're in need of replacement parts, Powermaster has you covered.
( 30 )
$31.99
Sierra Marine starter solenoids are OE replacements for specific watercraft applications. These solenoids are built to factory specs to restore the starter performance you rely upon.
Not Yet Reviewed
$23.99
Dorman starter bolts are the way to go when you want to mount your starter right. Designed to be direct replacements for the stock bolts, you can rest assured that you're using the right hardware for your installation. Don't take chances when installing your starter--mount it with Dorman starter bolts!
( 16 )
$33.99
Don't take chances with an old, questionable, or malfunctioning starter solenoid that can leave you stranded. Standard Motor Products T-Series starter solenoids are designed to meet or exceed OEM specifications for accurate, maintenance-free operation. Standard's T-Series is a competitively priced line containing some of the most popular part numbers for whenever an installer grade product is called for. Trust your vehicle's electrical starting system needs to Standard Motor Performance.
( 7 )
$27.99
When it comes to high-quality OE replacement components, Dorman is here to help! These starter offset shims are perfect to use on your GM to ensure proper spacing between the starter drive and the ring gear.
( 36 )
$25.99
Does your starter need to be rebuilt? If so, then trust the quality of these Powermaster starter rebuild parts. Made from high-quality materials, these Powermaster starter rebuild parts are sure to have your starter functioning like it did when it was new.
( 9 )
$26.99
These CVR starter drive end plates give you the ability to convert a GM starter to a Ford unit. They are made of billet aluminum and come in multiple styles to fit different CVR starters.
( 2 )
$49.99
—
$68.99
When starter solenoids go bad, it can begin as an intermittent problem, or they can just quit cold turkey with no warning. Crown Automotive has replacement starter solenoids available for many applications. Starters fail after years of wear and gunk build up, losing the clean surfaces needed to make an electric contact inside. As motors age, more strain is put on starters and they fail sooner. Get going with Crown, an industry leader in replacement components.
( 3 )
$29.99
Rick's Motorsport starter solenoid switches meet or exceed OEM specifications. These solenoid switches are preassembled with all wiring harnesses attached for a quick, easy installation. Don't settle for anything less than Rick's Motorsport starter solenoid switches.
Not Yet Reviewed
$34.95
—
$48.95
Replace damaged parts with these Summit Racing™ starter drive end blocks. They're built from quality materials to restore your Summit starter's mounting block.
( 4 )
$40.99
—
$45.99
OMIX-ADA starter solenoids are designed to be direct OE replacements for your Jeep's starter solenoid. They are built to original specs for a perfect fit and finish and are constructed from materials that meet or exceed your OE starter solenoids. They will help ensure the long-lasting durability and performance you've come to except from OMIX-ADA parts.
( 1 )
$34.99
Bosch remanufactured starter motors are built for extreme heat, cold, and high demand. Every engine starter component is 100 percent factory-tested prior to and during remanufacturing to assure it meets or exceeds OE specs. Additional notes on Bosch Professional Preferred remanufactured starters: * Each unit is remanufactured, not rebuilt * Includes the highest quality of materials and the most technologically advanced processes * Offers premium starting performance * All shaft splines and load-bearing surfaces are lubricated with OE high-temperature grade * Armature continuity is tested, gauged, straightened, and shimmed
( 13 )
$51.99
ACDelco remanufactured starters are 100 percent performance-tested to ensure the ability to start your engine. They're engineered to fit your vehicle and built to provide the same performance, durability, and service life you've come to expect—at a great value! Damaged and obsolete parts are replaced, and the units receive 100 percent new bearings, bushings, and brushes for the ultimate in reliability. Over a thousand models are available; order the starter recommended for your vehicle. Don't wait until a weak, aging starter fails completely; install an ACDelco product … and turn the key with confidence!
( 53 )
$48.50
—
$52.99
When your starter decides to take the day off, give it an attitude adjustment with Quadboss starter repair kits. These kits are your first stop when rebuilding the brushes and plate. Let Quadboss starter repair kits put a spark back into your ride.
Not Yet Reviewed
$21.33
Ignite your bike with Rick's Motorsport starter rebuild parts! These Rick's Motorsport starter brushes will breathe new life into your ride. When your starter is in need of rebuilding, Rick's Motorsport starter brushes have you covered.
Not Yet Reviewed
$20.95
Rick's Motorsport starter brush plate rebuild kits are direct OE replacements that meet or exceed factory specifications. Starter brush plate rebuild kits fit many powersports applications. These Rick's Motorsport starter brush plate rebuild kits are manufactured from high-quality material and are very durable for a long life.
Not Yet Reviewed
$42.95
All Balls Racing offers end cover starter buttons put the button on the starter for emergency use or to clean up your ride. These simple and sturdy aluminum switches mount directly to the starter solenoid by replacing the end cover. They eliminate your handlebar mounted starter switch or to add a fail-safe to protect yourself from a failure in the ignition circuit. Select the end cover starter button for your application needs. Additional product information: * Aluminum construction * Push-button, momentary activation * Offered in gloss black, chrome, and wrinkle black finishes * Bypasses wiring prior to the solenoid * Bike can be started despite defective components in the ignition circuit * Starter button fits OEM and most aftermarket starters with a 1.2,1.4,1.6, and 1.7 kW starter * Also available for most 2.0, 2.2, 2.4, and 2.6 starters * Weather-proof sealed
Not Yet Reviewed
$49.45
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
