Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
1994 Ignition Components
Showing In Stock Items. Show All 38 Items.
On Sale
Summit Racing™ Blueprinted HEI Distributors
Get more power from a high-energy ignition than you ever expected with a brand new Summit Racing™ blueprinted HEI distributor. They feature a 50,000 V coil, medium weight advance springs, and an aluminum housing. The distributor shafts are guided by precisely aligned bushings for durability in extended street use, and most models include an adjustable vacuum advance. Separate advance springs are available, so you can fine-tune to your hearts content. Be in it to win it—with the Summit Racing™ blueprinted HEI distributor designed to fit your application.
( 1245 )
$115.99
—
$319.99
$104.39
—
$287.99
On Sale
Summit Racing™ Distributor Gears
Match your camshaft with Summit Racing™ distributor gears. These small, durable replacement gears make a big impact on your engine's performance. They're available in a variety of materials and sizes for applications from the 1950s and up. Order the model recommended for your vehicle.
( 81 )
$19.99
—
$77.99
$17.99
—
$70.19
On Sale
Summit Racing™ Digital RTR Plus Billet Distributors
We've taken our original Ready-to-Run billet distributors and upped the ante with our Summit Racing™ Digital RTR (Ready-to-Run) Plus billet distributors. They now feature a digital module with a 7.5 amp rated dwell control circuit for maximum energy output. They deliver 400 volts and 125mJ of spark energy to the coil and upwards of 50,000 volts from the coil to the spark plugs. We've also added a single-stage rev limiter with a simple "tap to ground" process of the tachometer lead attached to the module to set the limiter. The tachometer dual purpose lead also produces a 25 percent duty cycle, square wave signal, so it can be used with multifunction tachometers and most popular aftermarket EFI systems. Another bonus feature of our digital technology is a fully automatic start retard. This built-in feature provides 4 degrees of timing retard during cranking and is fully dialed out by 300 rpm. This gives you easier and quicker hot restarts while lowering the initial start load on the starter and electrical system. With all these upgraded features, you're assured of peak output throughout all RPM ranges, quicker hot starts, EFI capability and the reliability of digital technology. The distributors still have the same lightweight, forged, precision CNC-machined aluminum housing for strength and stability; polished steel shafts with sealed ball bearings for stable operation through 10,000 rpm; and a maintenance-free, high-output magnetic trigger for accurate and reliable performance. All distributors come with a high-quality, 30 percent glass-filled PBT cap and rotor with brass terminals and contacts. An ignition box is not required for use with Summit Racing™ Digital RTR Plus billet distributors except when used with an aftermarket EFI system. Select the model recommended for your car, truck, or van.
( 7 )
$349.99
—
$374.99
$314.99
—
$337.49
On Sale
Summit Racing™ LT1 Optispark Distributors
Replace your stock LT1 Optispark distributor with our all-new Summit Racing™ LT1 Optispark I or II distributors. These distributors feature an aluminum housing with heavy-duty oilite bushings, and a glass-reinforced cap with high dielectric strength and aluminum terminals.
( 125 )
$240.99
$216.89
On Sale
Summit Racing™ Ignition Kits
Revitalize your small block Chevy's ignition with our Summit Racing™ ignition kits. These packages includes a Summit blueprinted HEI distributor with a powerful 50,000V coil, a high-output 5.7 amp module for precise timing, and a hardened iron drive gear suitable for use with a flat tappet camshaft. Plus, a set of custom-fit Summit 8mm ignition wires, which have a spiral-wound 270 ohm/ft. conductor around an aramid fiber core, blue silicone outer jackets, and stainless steel and brass terminals.
( 18 )
$150.98
$135.88
On Sale
Summit Racing™ Ready-to-Run Billet Distributors
Our Summit Racing™ Ready-to-Run billet distributors provide reliable spark throughout the rpm range, so they'll deliver the performance you need, no matter what you drive--race car, street machine, or hauler. The affordable distributors have high-dollar features that outperform the competition, like a lightweight aluminum housing that's precision CNC-machined for strength and stability, polished steel shafts with sealed ball bearings for stable operation through 10,000 rpm, and a maintenance-free, high-output magnetic trigger for accurate and reliable performance. The distributors have a black alkyd cap and some models also feature vacuum advance. An ignition box is not required for use with Summit Racing™ Ready-to-Run billet distributors except when used with an aftermarket EFI system.
( 29 )
$341.99
$307.79
On Sale
Summit Racing™ Ignition Systems For Chevy V8
Upgrade your ignition to the power and performance of a Summit Racing™ system. Our ignition system combos for Chevy V8 feature a Summit Racing™ multi-spark digital capacitive discharge ignition box (with or without rev limiter), a Summit Racing™ billet distributor or blueprinted HEI distributor, and our 51,000 V, 260 milliamp ignition coil (the HEI kit does not include the external coil). The epoxy coil has E-core windings, stud terminals, and an extruded aluminum mount. It measures 3.228 in. tall x 4.553 in. long x 4.519 in. wide.
( 38 )
$450.97
—
$451.97
$405.87
—
$406.77
On Sale
Summit Racing™ Computer-Controlled Billet Distributors
Our Summit Racing™ computer-controlled billet distributors provide reliable spark throughout the rpm range, so they'll deliver the performance you need, no matter what you drive--race car, street machine, or hauler. The affordable distributors have high-dollar features that outperform the competition, like a lightweight aluminum housing that's precision CNC-machined for strength and stability, polished steel shafts with sealed ball bearings for stable operation through 10,000 rpm, and a maintenance-free, high-output magnetic trigger for accurate and reliable performance.
( 92 )
$219.99
$197.99
On Sale
Summit Racing™ Bronze Distributor Gears
Make sure that you have the right distributor gear for your steel billet roller cam. Our bronze distributor gears from are made from high-quality aluminum bronze alloy and are precision-machined for smooth, reliable operation.
( 11 )
$40.99
$36.89
On Sale
Summit Racing™ High-Output Ignition Coils
Our Summit™ high-output ignition coils give you additional volts of spark energy in a simple, direct replacement package. These coils mount in the stock location with no special mounting needed, but have a lower primary resistance, higher rpm capability, and greater output than stock. They're available in a variety of styles, both universal and application-specific, and can be ordered individually or in sets.
( 375 )
$30.99
—
$51.99
$27.89
—
$46.79
On Sale
Summit Racing™ Distributor Hold-Down Clamps
Since you're installing that new distributor, you'll need Summit Racing™ hold down clamps. Dress up your engine compartment while securing your distributor. Made from top-quality materials, they're the perfect way to dress up your engine compartment.
( 106 )
$8.99
—
$28.99
$8.09
—
$26.09
On Sale
ACCEL GM HEI In-Cap Super Coils
ACCEL HEI in-cap Super Coils provide more high-rpm power and overall performance. Compatible with both original and computer-controlled HEI ignition systems, ACCEL HEI in-cap Super Coils are designed to resist shock and vibration. They have a finned cover that aids cooling, and hardware is included.
( 43 )
$100.95
$77.45
On Sale
Summit Racing™ Distributor Cap and Rotor Kits
Simplify your tune-ups and keep them budget-friendly with our Summit Racing™ cap and rotor kits. These affordable kits are molded from premium materials and have brass or aluminum inserts depending on application.
( 380 )
$32.99
$29.69
On Sale
ACCEL Super Coils
ACCEL Super Coils are engineered for a faster rise time and a longer spark duration. They produce higher spark energy for increased performance. These coils are available for a wide variety of specific engine applications. Order the set designed for your make and model.
( 806 )
$249.95
—
$259.95
$141.26
—
$146.25
On Sale
Summit Racing™ Volt Max X-TREME Spark Plug Wire/Cap and Rotor Kits
Tune-up your entire ignition at once with Summit Racing™ Volt Max X-TREME spark plug wires, cap, and rotor kits. They're made to handle extreme conditions while perfectly matching OEM specs. The ultra-low resistance wire core is wrapped in a high dielectric capacitance jacket to keep voltage directed to the plug, and is protected by a tough silicone outer jacket. Stainless steel terminals (solid brass for Ford D.I.S. applications) with hardened, positive snap-locks ensure a permanent connection, and the silicone boots can handle up to 450 degrees F of heat. The wire sets include dielectric grease to seal terminals and boots, plus wire separators (a must if your OEM wire are 7mm). Select the tune-up kit designed for your vehicle.
( 152 )
$70.98
—
$102.98
$63.88
—
$92.68
On Sale
ACCEL Mopar Remote Super Coils
ACCEL Mopar Remote Super Coils provide increased performance for Dodge trucks and Jeeps. You get quicker starts, improved idle, crisp throttle response, and higher top rpm power. These coils are compatible with Mopar J-TEC computer-controlled ignitions and are direct bolt-in units.
( 102 )
$78.85
$60.64
On Sale
ACCEL Performance Replacement Distributors
ACCEL Performance replacement distributors are perfect for your daily driver or street machine. They're built with all-new components and high performance ACCEL electronics. Each model's design features the materials and accessories that make for an easy installation while providing the fit, form, and function you need. Order the ACCEL Performance replacement distributor designed for your engine when you need a quality substitute or want better performance.
( 154 )
$289.95
—
$465.95
$225.47
—
$310.02
On Sale
Holley Sniper HyperSpark Ready to Run Small Cap Distributors
Holley Sniper HyperSpark ready to run small cap distributors adds plug and play ignition timing control to any Holley EFI system. This line of distributors comes with a built-in ignition coil driver, removing the need of mounting an ignition box or external coil driver. The design includes a single Hall Effect sensor providing engine rpm to the ECU. The precision shutter wheel design ensures accurate timing, even at very high engine speeds. They can also be used with other EFI systems that support a Hall Effect crank signal input. Order the model designed for your application needs. Features: * Easiest plug-and-play way to add timing control to any Sniper EFI installation * Designed to work with HyperSpark ignition coil (PN: 556-152); also compatible with most canister ignition coils using the supplied ring terminals * Built-in ignition coil driver, safely provides enough spark energy for applications up to 450 hp * Patented clear installation cap eliminates any confusion while installing the distributor * Cast aluminum distributor housing looks right at home in nearly every engine bay * Comes with cast gear installed—contact camshaft manufacturer for recommended gear material * Comes with steel gear for SBF applications with an aftermarket camshaft * Precision shutter wheel provides the ECU a clean rpm signal via a single Hall Effect sensor, ensuring accurate timing even at high engine rpm * Shutter wheel design allows for a "timed sequential" fueling strategy with Terminator X, HP, and Dominator ECU's * Includes wire retainer for a clean installation
( 2 )
$549.95
$366.41
On Sale
ACCEL Remote Super Coils
Increase your throttle response, idle quality, and starting with these ACCEL remote Super Coils with included hardware. They feature higher energy output for top rpm power and work as direct bolt-in replacements. Super-charge your vehicle's energy requirements with the ACCEL remote Super Coils designed for it!
( 81 )
$86.77
$66.72
On Sale
Crown Automotive Distributors
Crown Automotive distributors deliver accurate trigger signals. When it's time to improve your ignition system, you can rely on Crown for quality direct-fit replacement parts. These distributors are constructed of cast aluminum housings and steel gears, magnetic or points-style triggers, and most have caps included. Hook one up to deliver the voltage from your coil to the spark plugs for reliable ignition!
( 18 )
$108.99
—
$125.99
$98.09
—
$113.39
On Sale
MSD Pro-Billet Cam Sync Distributors
Are you running an aftermarket fuel injection system and looking for a top-notch distributor that actually works? If so, these MSD Pro-Billet Cam Sync distributors are just what you need. They're designed to work with EFI management systems that fire the fuel injectors in the same order as the engine's firing order. They require a sync signal to know when the number one cylinder is firing and feature an adjustable sync pickup so you can set it to match your ECU's requirements (up to 60 degrees BTDC). This sync pickup uses a powerful, rare-earth magnet for strong trigger signals, and the wiring is routed through a weathertight connector for a positive-locking sealed connection. Each distributor housing is CNC-machined from billet 6061-T6 aluminum, creating a strong, precise housing. The rotor features thick vanes to stir up the air and is injection-molded from Rynite for high dielectric strength. A 0.500 in. polished steel shaft spins the rotor and is guided by a sealed ball bearing at the top and an extra-long sintered bushing at the bottom for added stability. These distributors are ready to drop in your race engine, from the bronze gear to the brass terminals of the cap. Chevrolet models have an adjustable slip collar that allows you to accurately set the distributor's installation depth in the engine. An MSD crank trigger, ignition control, and MSD 6, 7, 8, or 10 Series ignition must be used.
Not Yet Reviewed
$799.95
$450.95
On Sale
ACCEL Distributor Caps
ACCEL distributor caps are the best way to help improve ignition. The compression-molded caps are stress-relieved immediately after molding to ensure stability of the 60,000 V alkyd high-performance compound. Brass inserts provide for high spark energy flow. These heavy-duty ACCEL distributor caps provide maximum energy to your engine. They're available in a variety of styles for a wide range of vehicle application.
( 49 )
$82.55
$55.03
On Sale
Summit Racing™ Replacement Ignition Modules
If your ignition module dies, you won't be going anywhere, and you have things to do and places to go. You can keep your distributor running smoothly with replacement ignition modules from Summit Racing™. These direct-replacement simple 3-wire hookups will have you out and about in no time. Make sure you're always ready with Summit Racing™ replacement ignition modules.
( 30 )
$39.99
$35.99
On Sale
MSD Pro-Billet Dual Sync EFI Distributors
MSD Pro-Billet Dual Sync EFI distributors feature high-quality dual Hall effect sensors, a QPQ coated precision billet shutter wheel, and distributor shaft that's guided by a sealed ball bearing. They also include a race-proven distributor gear, and a performance cap and rotor. The distributors are designed for use with Holley EFI systems; they may also fit other systems requiring a Hall effect sensor. Order the model recommended for your vehicle and engine application. (Note: an ignition adapter is required when Pro-Billet Dual Sync EFI distributors are utilized with Sniper EFI.) Features, specs, and parts may include: * CNC-machined billet aluminum housing * Precision-machined shutter wheel designed for improved accuracy at extreme engine rpm * Plug-and-play with Holley EFI * Can be used to trigger popular TBI fuel injection systems * Hall Effect sensor design provides precise timing control and noise immunity * Integrated LEDs allow for easy setup * Shutter wheel is pinned and welded to distributor shaft for superior reliability
( 17 )
$579.95
$329.95
