1992 FORD | Summit Racing

Summit Racing™ Automatic Transmissions

Summit Racing™ Automatic Transmissions combine quality and economy to offer replacement transmissions in many styles and options. These units are remanufactured with all-new clutches, thrust washers, seals, bushings, and high-energy bands, along with other "failure prone" hard parts depending on unit. Other features include a rebuilt front pump, a valve body with shift for street and performance and high-quality seals and gaskets. You get all these impressive upgrades, along with reliable performance and extreme value. All transmissions are Dyno tested before they're shipped. Order the model recommended for your vehicle.

3.51 out of 5 stars ( 65 )

$1,921.99

Trick Flow® Twisted Wedge 11R® 227 Cylinder Heads for Small Block Ford

Twisted Wedge® 11R 227 cylinder heads represent Trick Flow's ultimate development of the Twisted Wedge® innovation, featuring Trick Flow's most efficient combustion chamber design. The combustion chamber and valve layout move the intake valves away from the cylinder walls to reduce valve shrouding, significantly improving flow at higher lift. Shallow 11° intake/13° exhaust valve angles improve piston-to-valve clearance for high lift cams and reduce chamber volume for improved compression and efficiency. High velocity runners are optimized on the flow bench and dyno proven to outperform the competition on hydraulic roller camshaft engines. Premium materials and components, along with world-class CNC processes, guarantee uncompromising quality and durability, dimensional accuracy, and balanced flow from port-to-port. Machined castings increase strength and have a billet-like appearance. Additional features include CNC-profiled combustion chambers, 2.080"/1.600" stainless steel intake/exhaust valves, Trick Flow® by PAC Racing valve springs, and titanium retainers. Twisted Wedge® 11R 227 heads have CNC Competition Ported runners with a premium high- resolution finish for ultimate performance. Cylinder heads are available fully assembled or as bare castings. Sold individually. Key Features: • 227cc intake ports and 56cc or 66cc combustion chambers • 2.080 in. stainless steel intake valves • 1.600 in. stainless steel exhaust valves • .625" thick deck • Titanium retainers • 11 degree intake valve angle • 13 degree exhaust valve angle

Not Yet Reviewed

$1,549.99

On Sale

Holley Sniper 2 EFI 650 HP Base Fuel Injection Systems with Power Distribution Module

Holley Sniper 2 EFI Base Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * For applications using a vehicle specific EFI conversion tank and fuel pump, or already having a fuel system capable of the required 55-65 psi, these systems are offered without a pump and fuel lines * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

4.3 out of 5 stars ( 10 )

$1,999.95

—

$2,199.95

$1,798.95

—

$1,978.95

Dakota Digital RTX Direct-Fit Gauge Kits

Dakota Digital RTX direct-fit gauge kits retain your classic vehicle's stock look without sacrificing the late-model features you love. Every effort was made to incorporate OEM design elements regarding the layout, face styling, and indicators. Starting from scratch, these CNC-machined cluster housings are filled with electronics that raise the bar--in fact, the high-def message centers can be configured to display just about any piece of information needed. The RTX Series utilizes a central control box to make installation and setup as easy as possible. Choose the model with gauges and features designed to fit your specific vehicle.

4.81 out of 5 stars ( 109 )

$1,676.75

COMP Cams Xtreme Energy Retrofit Cam and Lifter Kits

COMP Cams Xtreme Energy retrofit cam and lifter kits are built to take advantage of the latest cam technology, to provide maximum performance. Whether your use is off-roading, towing, or street performance, there is an Xtreme Energy kit available for you. By using an aggressive lobe profile, these kits provide better throttle response and more top-end horsepower than equivalent cams from other manufacturers, while delivering increased engine vacuum.

4.22 out of 5 stars ( 40 )

$1,676.95

Trick Flow® Twisted Wedge 11R® 205 Cylinder Heads for Small Block Ford

Something great just got better! Trick Flow® used advanced 3D solid modeling and CAD tools (plus a couple decade's worth of racing experience) to turn its track-proven Twisted Wedge® design into the potent Twisted Wedge® 11R 205 head for serious performance enthusiasts and racers. Trick Flow® Twisted Wedge® 11R 205 heads are a direct replacement for previous Twisted Wedge® heads and work with all Twisted Wedge-specific pistons. New high velocity, race-inspired CNC Competition Ported runners have been optimized for today's popular bore and stroke combinations, and have a premium high resolution finish for ultimate performance. Modified 11 degree intake and 13 degree exhaust valve angles and a restructured, CNC-profiled combustion chamber arrangement provides more airflow and performance potential. Premium certified materials and components, along with the finest CNC tooling, are used to ensure uncompromising quality and durability, dimensional accuracy, and balanced flow from port-to-port. The fully machined castings are very strong and have a great-looking, billet-like appearance. Trick Flow® Twisted Wedge® 11R 205 cylinder heads are available fully assembled or as bare castings and sold individually.

5.0 out of 5 stars ( 7 )

$1,524.99

—

$1,574.99

Ford Performance Parts Super-Duty T-5 Transmissions

Ford Performance Super-Duty T-5 transmissions are world class components for your hardcore street machine. Features include: * Heavy-duty "World Class" T-5 5-speed manual transmission with short-throw shifter * 300 ft./lbs. torque capacity * Double-moly 2nd speed, 3rd speed and countershaft cluster gears * Carbon-fiber 3-4 blocker rings * Improved synchronizers and bearings * 1-1/16 in. diameter 10-tooth input spline * 28-tooth output spline * 7-tooth speedometer drive gear * Cobra-style pocket bearing

4.3 out of 5 stars ( 33 )

$2,000.00

Scat Engine Rotating Assemblies

Scat engine rotating assemblies are available with either a high-quality Scat forged 4340 crankshaft or Scat's Series 9000 cast crankshaft, plus I-beam or H-beam connecting rods with 7/16 in. or 3/8 in. cap screw bolts. For maximum power and reliability, Scat adds rod and main bearings from King, Federal Mogul, or Clevite 77, depending upon the application—and pistons and piston rings made by such well-known manufacturers as SRP/JE, Ross, KB, Mahle, Diamond, and Probe. Kits with cast and standard forged pistons have standard rings; kits with premium forged pistons have file-fit rings. Nearly 800 Scat kits are available; order the package tailored for fitment with your engine application.

4.25 out of 5 stars ( 134 )

$1,611.99

—

$1,928.99

TCI Maximizer 4x4 Transmissions

Bring out the performance of your 4x4 with these Maximizer transmissions from the folks at TCI. Four-wheel drive vehicles are tough on automatics, especially with the addition of a lift kit and larger tires. Maximizer transmissions are built with that in mind. Each one is assembled with the strongest components available and designed to provide crisp shifts, time and time again. They give you all of that, and they'll deliver long and dependable service, too.

3.32 out of 5 stars ( 31 )

$1,809.95

Trick Flow® High Port® 225 Cylinder Heads for Small Block Ford

Trick Flow® High Port® 225 cylinder heads are specifically designed for large cubic inch small block Ford engines as well as engines with high-boost superchargers or turbos, big shot nitrous oxide systems, and other mega-power combinations. They feature unique valve spacing, .750" raised exhaust runners, extra strong castings and thick decks for additional rigidity and gasket integrity, superior cooling characteristics, and most importantly, excellent airflow. Top-of-the-line CNC Competition Ported runners with a high resolution surface finish provide maximum airflow and power over the entire rpm range. The entry into the intake runner has been reshaped to help seal the area along the port roof and thicker port walls increase strength and provide additional material for porting. Plus, interlocking ductile iron seats are used to handle the stresses of high heat, high horsepower applications. Other features include fully CNC-profiled combustion chambers with port-to-valve seat blending (bowl blending) and raised valve cover rails. Trick Flow® High Port® 225 cylinder heads are available fully assembled or as bare castings and sold individually.

5.0 out of 5 stars ( 3 )

$1,549.99

On Sale

Holley Terminator X MAX Engine Management Systems

Holley Terminator X MAX engine management systems let you take control of your domestic V8 engine. They give you complete charge of your engine and self-learning fuel strategies, along with the proven, race-winning technology of Holley EFI—all at a budget-friendly price! Every MPFI Terminator X MAX features real-time fuel learn, high-impedance injector drivers, an integrated one-bar MAP sensor—and four programmable inputs and outputs, ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. Also, Holley offers the X MAX systems with either or both drive-by-wire (DBW) throttle body control or transmission control. All kits come fully loaded with base maps for common domestic V8 engine combinations to get you out of the garage and onto the road or track fast. Order the model recommended for your vehicle application. Features include: * Holley EFI industry-leading, easy-to-use software suite allows full laptop access for advanced users * Real-time fuel map learn—takes the guesswork out of tuning your base fuel table * High-impedance injector drivers will safely power most standard injectors and Holley EFI injectors (will not control low-impedance injectors) * Bosch LSU 4.9 wideband relays AFR information to the ECU for accurate reading and precise tuning control * On-board one-bar MAP sensor is perfect for N/A or nitrous engine combos * MAP sensor vacuum hose adapters * 4 inputs: 12 V, ground, 5 V, and frequency * 4 outputs: Ground, PWM, and for accessories * Boost control: boost vs. time, boost vs. gear, boost vs. rpm, boost vs. speed, and boost safeties * Nitrous control: single channel of wet or dry, progressive or non-progressive, rich/lean safeties, and target closed loop AFR; adjustable through touch screen * Advanced tables can be used for any custom tables * On-board diagnostic LEDs allow you to identify any critical engine issues at a glance * The compact ECU size allows you to mount it virtually anywhere. Remember, diagnostic LEDs must face up! * Plug-and-play compatible with more Holley EFI accessories * Available with or without a 3.5 in. touch screen LCD hand-held with easy-to-use calibration wizard; allows you to quickly build a base tune for most V8 engines, as well as tuning and gauge display functions

4.18 out of 5 stars ( 92 )

$1,899.95

$1,708.95

Edelbrock E-205 Cylinder Heads

You're taking a step up in performance with Edelbrock E-205 small block Ford cylinder heads. Featuring larger runners for increased airflow, revised exhaust ports, and larger diameter springs for higher lift camshafts, Edelbrock E-205 cylinder heads are ideal for spec series racers and larger displacement engines. They are able to support the power that you need to compete--more than 500 naturally aspirated horsepower and even more in forced induction applications! Get race-level performance with OEM compatibility when you bolt on a pair of Edelbrock E-205 cylinder heads.

3.5 out of 5 stars ( 2 )

$1,687.95

—

$1,838.95

BluePrint Engines Accessory Drive Systems

BluePrint Engines offers accessory drive systems for a variety of year/make and engine applications. Unless otherwise noted, the systems contain the various crankshaft pulleys; water pump components; power steering pulleys, brackets, and pump; alternator pulleys, brackets, and parts; and necessary hardware. Order the drive system recommended for your vehicle.

4.0 out of 5 stars ( 1 )

$1,549.99

—

$1,989.99

Jesel Sportsman Series Shaft Rocker Arms

Since their release, Jesel Sportsman Series shaft rocker arms have proven themselves to be the ultimate replacements for inadequate stud rocker assemblies on OEM and aftermarket cylinder heads. The 2024 aluminum bodied rocker arms are designed to withstand open spring pressures of up to 900 lbs., while maintaining precise valve lash settings. They are designed to bolt on with little to no cylinder head modifications and in most cases still fit under a stock valve cover. The rocker geometry is preset and engineered using the common valve supplied with the specific cylinder head to provide a bolt-on-and-go installation. If you're still spending aggravating hours adjusting your stud rockers only to have to repeat the procedure the next weekend, Jesel Sportsman Series shaft rocker arms are your solution. Choose a set designed for your application.

4.23 out of 5 stars ( 26 )

$1,535.00

Trick Flow® Twisted Wedge 11R® 190 Cylinder Heads for Small Block Ford

Something great just got better! Trick Flow® used advanced 3D solid modeling and CAD tools (plus a couple decade's worth of racing experience) to turn its track-proven Twisted Wedge® design into the potent Twisted Wedge® 11R 190 head. These heads are a direct replacement for previous Twisted Wedge® heads and work with all Twisted Wedge®-specific pistons. Modified 11 degree intake and 13 degree exhaust valve angles and a restructured, CNC-profiled combustion chamber arrangement provides more airflow and performance potential. You can get your Twisted Wedge® 11R 190 heads in two flavors: • 11R 190 heads with new high-velocity, race-inspired CNC Street Ported runners are great entry-level CNC heads combining fully CNC-machined runners and combustion chambers with a standard resolution surface finish for significant performance gains. • 11R 190 heads with CNC Competition Ported high-velocity, race-inspired runners feature fully CNC-machined runners and chambers with a premium high resolution finish for ultimate performance. Premium certified materials and components, along with the finest CNC tooling, are used to ensure exceptional quality and durability, dimensional accuracy, and balanced flow from port-to-port. The fully machined castings are very strong and have a great-looking, billet-like appearance. Trick Flow® Twisted Wedge® 11R 190 cylinder heads are available fully assembled or as bare castings and sold individually.

4.86 out of 5 stars ( 28 )

$1,524.99

ATK High Performance 1988-92 Ford 460 Short Blocks

Start your next engine build off the right way with these ATK High Performance 1988-92 Ford 460 short blocks. ATK hand-builds, balances, and blueprints these engines to ensure that they are a smooth-running, reliable base for your next engine. These short blocks are prefect for building replacement motors for your car, truck, or hot rod. These ATK High Performance 1988-92 Ford 460 short blocks include the following: * Handpicked and seasoned block * Aligned and honed main bores * OE cast crankshaft * 3.85 in. stroke * OE connecting rods * Hypereutectic D-cup pistons

4.0 out of 5 stars ( 5 )

$1,715.99

QA1 Proma Star Single Adjustable Coilover Systems

As part of the number one choice for custom suspension systems, QA1 Proma Star single adjustable coilover systems are available in several lengths, making them easy to fit in almost any situation. Both the double-adjustable versions and these single-adjustable models allow you to set your valving to fit your driving style, so you are ready to hit the road, nearest racetrack, or anywhere in between. Get that perfect stance with adjustable ride height when you order the QA1 Proma Star single adjustable coilover systems best suited for your application. Other product features include: * On-the-car adjustable valving makes it quick and easy to dial in your desired level of comfort and performance * Shocks feature a 2 in. body diameter and can be mounted in any orientation * Spring mounting hardware designed for coil springs with a 2 1/2 in. inside diameter * Alternative mounting options available to fit your custom chassis * 100-percent dyno tested and serialized * QA1 single-adjustable shocks are designed for performance street driving, autocross, and lower-powered drag racing (rear only) * All QA1 single-adjustable shocks feature simultaneous compression and rebound adjustment on one knob (18 positions)

4.5 out of 5 stars ( 2 )

$1,552.95

PROMAXX Performance Project X Small Block Ford Cylinder Heads

PROMAXX Performance Project X small block Ford cylinder heads are one word—awesome! They feature ultra-smooth 356-T6 aluminum casting, 5-angle valve jobs, precision CNC machining, and diamond-honed bronze guides and can make big power in your small block Ford application. The new swirl designed chamber is the difference. Couple that with a state-of-the-art new casting and you have a home run! Fit your budget build with abundant power with PROMAXX Project X small block Ford cylinder heads.

4.67 out of 5 stars ( 3 )

$1,560.00

—

$1,833.00

Eagle Street and Strip Rotating Assemblies

Eagle Street and Strip rotating assemblies consist of name-brand quality components for a wide range of engines at an affordable price. These kits feature a crankshaft, pistons, piston rings, rod and main bearings, and connecting rods. Based on your application, balanced assemblies are also available. Order the model designed for fitment on your year/make vehicle and engine application.

4.41 out of 5 stars ( 85 )

$1,661.99

—

$1,815.99

Eaton Electronic ELocker Differentials

Eaton electronic ELocker differentials offer you the best of both worlds. Imagine having the comfort and convenience of an open differential for around town—and the powerful traction of a full-on locker when it's necessary. This is exactly what the Eaton ELockers provide. With the push of a dash-mounted button, you decide when the differential should be fully locked for maximum traction to both wheels, or free to differentiate for the best fuel mileage and tire tread life. Whether you're running a 2WD or 4WD, open or locked, the Eaton ELockers put the driver in total control! Order the carrier designed for your axle model.

4.0 out of 5 stars ( 12 )

$1,584.99

—

$1,956.99

Baer Brakes SS4 Disc Brake Systems

Baer Brakes SS4 disc brake systems deliver superb stopping power. These systems feature their S4 4-piston calipers mounted to a slotted, drilled, zinc plated rotor (see diameters). Baer systems include unique billet backing plates that not only act as caliper mounts, but also house the banksia (one-piece) park shoe--a more modern and better working park brake assembly (on rear kits). Baer Brakes SS4 disc brake systems are completed with stainless steel brake hoses and the proper banjo fittings, and come in a choice of red, black, or silver powdercoat for the calipers.

3.33 out of 5 stars ( 3 )

$1,649.95

Yukon Gear & Axle Ring and Pinion Gear and Differential Combos

Yukon Gear & Axle ring and pinion and differential combos save time and money by including everything you need in one simple part number. Pro Kits feature a premium Yukon ring and pinion gear set, Yukon Master install kit with high-quality Timken bearings, and required small parts to get vehicles back on the road quickly. The gear and install kits include axle bearings and seals. Many of these combo kits include Dura Grip differentials, depending on application. Order the Yukon Gear & Axle ring and pinion gear and differential combo designed to fit your application.

4.5 out of 5 stars ( 4 )

$1,538.99

—

$1,647.99

Aeromotive A1000 Stealth Fuel Tanks

Aeromotive A1000 Stealth fuel tanks help feed your hungry horsepower needs. These powdercoated steel tanks feature a self-contained pump and filter inside their high pumping Stealth A1000. With that you get their innovative baffling/tray system that not only controls slosh but keeps your pickup submerged to feed heavy acceleration, extreme driving, and--even when fuel levels are low--provide consistent performance. Slapping on a bigger fuel pump doesn't mean you'll have all the fuel you need. Aeromotive has the solution to fight starvation--A1000 Stealth fuel tanks.

4.0 out of 5 stars ( 1 )

$1,905.23

Ultimate Headers Mustang Godzilla Swap Headers

Increase the power of your Godzilla 7.3 swapped 1979-93 Fox Body Mustang with Ultimate Headers 1 7/8 in. stainless steel, long tube headers. Ultimate Headers Mustang Godzilla swap headers eliminate all guesswork with 321 stainless steel construction and tight radius cast elbows, enabling the header tubes to sit high and tight for a compact design that hugs the engine block, making these the perfect headers for your 7.3 Godzilla swap project. Features and benefits: * Large 1 7/8 in. primary tubes deliver improved exhaust flow * 3/8 in. thick stainless steel flanges with reinforced ribbing for added strength and improved cooling * 321 stainless steel offers reduced weight and increased resistance to material fatigue or cracking from high-heat situations * Cometic multilayer steel header gaskets are provided to ensure leak-free performance that lasts * Each connection is meticulously TIG welded * Appropriate oxygen sensor ports * Large 3 in. slip fit collectors * Header bolt kit included * Increased horsepower and torque * Intended for off-use only

5.0 out of 5 stars ( 3 )

$1,709.00

1992 FORD Parts and Accessories