1992 CHEVROLET CAPRICE Parts & Accessories

COMP Cams Thumpr Hydraulic Flat Tappet Cam and Lifter Kits

COMP Cams is bringing the muscle car sound back, and it's nastier than ever! Let's face it--few things serve to grab our attention at a car show or cruise night more than a car with a thumping, high performance idle. In an ongoing quest to provide you with the performance and sound you demand, COMP Cams engineering team proudly introduces the Thumpr Series cam and lifter kits. The lobe profile and grind characteristics of these Thumpr camshafts use a combination of an early exhaust valve opening, a long exhaust duration, and a generous amount of intake and exhaust overlap to maximize the rough-idling characteristics of the cams. This gives you a seriously aggressive exhaust note without negatively impacting the power output or streetability of the engine. Thumpr camshafts are available in different grind profiles; each one will produce a rough, racy exhaust note and impressive amounts of horsepower and torque within a different rpm range. Thumpr Series cam and lifter kits deliver a substantial power increase over an identical hydraulic flat tappet grind without sacrificing reliability or ease of maintenance.

4.38 out of 5 stars ( 217 )

$589.95

Hedman Street Headers

For the price, no other part can give you the horsepower and fuel economy improvements of Hedman headers. They make Hedman Street headers so well that they guarantee them to be free from defects--including cracks in the tubes and welds--for the life of the headers. Hedman Street headers are available uncoated or in Black Maxx or their polished HTC thermal ceramic coated finishes and, as an added bonus, they also come with all necessary gaskets and mounting hardware. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts, and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom-altered parts, then it is the installer's responsibility to verify fitment. Special warning regarding Hedman painted headers only. The paint on these headers is not designed as a final finish; it is designed to protect the headers after the manufacturing process and during shipping. This paint will not withstand the high heat associated with engine break-in, nor will it withstand the heat cycles associated with any type of driving. It is recommended that this protective coating be stripped, and a high heat paint or coating designed for use on headers be applied.

4.17 out of 5 stars ( 2513 )

$529.99

—

$676.99

Air Lift WirelessAir 2nd Generation On-Board Air Compressor EZ Mount Systems

Air Lift WirelessAir 2nd generation on-board air compressor EZ mount systems give you everything you need for the fastest, easiest installation possible. EZ Mount systems package the manifold and upgraded, heavy-duty compressor into one convenient, pre-assembled and factory-tested bracket—giving you everything you need to have full control of your air springs in no time at all. Control the air like a boss with your Air Lift WirelessAir 2nd generation EZ mount kit. Features and items: * Inflate and deflate each air spring independently to different pressures * LCD-display wireless controller * One-touch control from inside or outside vehicle is perfect for uneven/top-heavy loads * Two user-defined memory buttons * Compact, dual-path design * Bluetooth-enabled manifold allows for over-the-air software updates * All wiring, hardware, and fittings required for installation

4.38 out of 5 stars ( 8 )

$671.03

QA1 GM 2.0 Street Control Arms

QA1 GM 2.0 Street control arms provide increased positive caster compared to OE arms and are among the lightest available. These arms feature a lower unsprung weight and improved performance without sacrificing durability. Each arm includes a QA1 integrated ball joint design which is stronger than OEM and rebuildable for tunability, providing long-term reliable service. These arms are designed with billet cross shafts for reduced weight and durability for the long haul. Double-sheer lower mounts are coil-over ready for a clean installation. QA1 GM 2.0 Street control arms look incredible and use no unsightly additional adapters! Form meets function with these newly designed arms that look and perform great without requiring painstaking restoring like factory stamped steel control arms.

4.74 out of 5 stars ( 27 )

$635.95

Meziere True Start 400 Series High-Torque Starters

These Meziere True Start 400 series high-torque starters are recommended for all high-compression, large displacement engines up to 700 cubic inches and supercharged applications. They feature custom gear reduction for the best cranking power and rotational speed. Their innovative billet aluminum head design provides the strongest drive gear support without an external nose support. The starter block features a full 360 degrees of clocking positions in 10 degree increments. Meziere True Start 400 Series high-torque starters feature an offset design that clears all kickout style oil pans.

5.0 out of 5 stars ( 17 )

$679.06

FTI Performance ESR Series Torque Converters

FTI Performance ESR Series torque converters are designed for mildly modified vehicles. They're built using Torrington bearings, race-prepped sprague hardened impeller hub, hardened turbine hub and splines, a new steel pilot, and laser-cut mounting ring. These units are available in a variety of sizes, advertised flash stall ratings, and numerous other options. Order the torque converter recommended for your transmission application.

4.63 out of 5 stars ( 65 )

$649.00

Eaton Detroit Truetrac Differentials

Eaton Detroit Truetrac differentials use a patented design of parallel-axis planetary helix gears to provide a quiet, automatic splitting of torque. They perform like a limited-slip differential under normal driving conditions, automatically transferring torque to the wheel with better traction when ground conditions warrant. These replacement units are available for dozens of axle applications.

4.77 out of 5 stars ( 515 )

$642.99

—

$659.99

Meziere True Start 500 Series High-Torque Starters

These Meziere True Start 500 series high-torque starters are recommended for all high-compression, large displacement engines up to 700 cubic inches and supercharged applications. They feature a super duty drive and custom gear reduction for the best cranking power and rotational speed. Their innovative billet aluminum head design provides the strongest drive gear support without an external nose support. The starter block features a full 360 degrees of clocking positions in 10 degree increments.

4.54 out of 5 stars ( 13 )

$679.06

Yukon Gear & Axle Dura Grip Positraction Carriers

Yukon Gear & Axle Dura Grip positraction carriers offer great traction and strength, and yet are not overly aggressive for the streets. These nodular iron or steel replacements are 4-spring, Raybestos composite, clutch-style, limited-slip carriers—with internal gears machined from forged 4320 steel with stronger teeth. Assembled in the USA, the Yukon differential carriers are rebuildable, allowing for repairs or modifications without buying a new unit. They're available for fitment with nearly two dozen axle models. What are you using to transfer power? Choose smooth operation with strong lockup abilities to transfer torque—benchmarks of the Yukon Gear & Axle Dura Grip positraction carriers.

4.39 out of 5 stars ( 142 )

$545.99

Hedman Elite Extreme-Duty Headers

If you think you are tough on your performance parts, but stainless is not in your budget, then Hedman Elite extreme-duty headers may be the right fit for you project. Their heavier duty construction takes the punishment, and their quality design dishes out the power! They feature thick wall 14-gauge mild steel primary tubes with 3/8 in. flanges to prevent warping for a longer lasting, leak-free seal. Hedman Elite extreme-duty headers are available with the matte silver or Black Maxx ceramic coatings that withstand temperatures up to 1,400 degrees F.

4.18 out of 5 stars ( 398 )

$575.99

—

$632.99

QA1 GM 2.0 Pro-Touring Control Arms

Designed for the pro-touring GM enthusiasts, QA1 GM 2.0 pro-touring control arms are a simple upgrade over original suspension or worn and outdated tubular control arms. The pro-touring arms are also for those wanting to improve their overall handling, ride quality, and vehicle stance. These arms will improve suspension geometry over the factory configuration and pave the way for planning additional upgrades. The high-strength, low alloy steel enables optimized thinner wall construction and results in overall lighter weight. The increased positive caster design improves straight line stability. Pro-touring arms also feature QA1's stronger, low maintenance, and rebuildable ball joints which feature integrated dust boots. Note: These control arms are not compatible with OE-type springs, a coilover system must be installed. QA1's arms will accept factory type sway bars and include upper and lower bump stops.

5.0 out of 5 stars ( 16 )

$739.95

COMP Cams High Energy Cam and Lifter Kits

Increase your street machine's gas mileage and powerband performance! COMP Cams High Energy cam and lifter kits are designed for street engines with an 8:1 to 9:1 compression ratio. They also work well with all stock components, including intakes, exhaust manifolds, and carburetors. These kits offer good increases in both gas mileage and power throughout the rpm range for most street applications.

4.24 out of 5 stars ( 188 )

$518.95

B&M Holeshot Torque Converters

A higher-than-stock stall speed as delivered by these B&M Holeshot converters will provide several advantages and benefits to vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low-end power and torque. These high-stall converters allow the engine to launch the car at higher rpm, where more torque is available. They're a very good choice for the typical street machine that is looking for better launch capability and more strength.

3.88 out of 5 stars ( 84 )

$649.95

—

$686.95

COMP Cams Magnum Hydraulic Cam and Lifter Kits

Designed for hot street/strip cars, COMP Cams Magnum Series cam and lifter kits require a higher compression ratio, rear-end gear ratio, and stall torque converter than stock. With a very aggressive profile, these Magnum hydraulic cam and lifter kits provide maximum top-end performance for your high performance car.

4.38 out of 5 stars ( 142 )

$522.95

—

$603.95

Summit Racing™ Battery Pro Packs

Summit Racing™ battery Pro Packs combo an Optima RedTop battery, Painless battery cable kit, and a tray/hold-down kit for a complete install in your vehicle. The high performance AGM RedTop is Optima's ultimate starting battery designed to deliver a strong burst of ignition power for a reliable start-up every time. The batteries offer longer life, more vibration resistance, no maintenance, and are virtually spill proof and mountable in most any position. Painless Performance battery cable kits include a red 1-gauge positive and a black 1-gauge negative cable with lightweight abrasion-resistant insulation capable of handling over 250 amps and heavy-duty terminals already installed, side post adapters, and high-amp crimp ring terminals. Their 16 ft. length make them ideal for trunk-mounted batteries and custom installs. The battery tray/hold-downs are made from premium aluminum and chosen to match the battery in the Summit Racing™ Pro Pack selected.

Not Yet Reviewed

$550.97

Ridetech Ridepro E5 Ride Height Sensor Kits

Ridetech Ridepro-HP Ride Height sensor kits upgrade your existing Ridepro E5 pressure-based system. They work together to deliver the ultimate air suspension management systems measuring both pressure and ride height accurately. With the addition of Ridepro-HP, ride height and spring balance (loads) are established by comparing the position of the ride height sensor to the air pressure within each air spring. Your car is leveled with no cross loading, which is especially important for dynamic driving scenarios where quick transitions occur, such as high performance driving, sudden directional changes, and panic stops. Ridetech complete Ridepro-HP kits include and feature: * Four ride height sensors * Four ride height sensor linkage kits * Group harness * 1/4 in. sensor bolts with Nyloc nuts and flat washers * Mounting tabs, heat shrink tubes, and installation guide * Easy installation * Heavy-duty ride height sensors * Bendable linkage rods with rubberized rod ends * Weatherproof connectors and wiring harnesses

2.0 out of 5 stars ( 1 )

$695.00

Summit Racing™ Positraction Differential Carriers

Summit Racing™ Positraction differential carriers deliver aggressive, yet smooth, controllable traction. Our carriers feature nodular iron cases, forged steel internals, strong teeth—and they're fully rebuildable. We offer fitments for dozens of axle models. Whether replacing or upgrading, Summit Racing™ Positraction differential carriers will put power to the pavement, providing the confidence and performance you need.

4.48 out of 5 stars ( 50 )

$599.99

—

$641.99

Patriot Clippster Headers

Patriot Clippster headers feature longer primaries that exit toward the rear of the engine compartment to clear steering and suspension components. They have slightly shorter primaries than full length headers and provide ground clearance on lowered vehicles. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts, and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment. Finishes available: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion-resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier (heat-resistant up to 1,600 degrees F) that significantly lowers underhood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes. * Raw steel is available for individual customizing

4.24 out of 5 stars ( 309 )

$550.15

—

$669.85

South Bend Clutch Stage 2 Daily Driver Clutch Kits

South Bend Clutch Stage 2 Daily Driver clutch kits are engineered for vehicles with high performance modifications. The heavy-duty pressure plate has an increased clamp load with little or no increase in pedal pressure to offer stock feel, while increasing strength and durability. The organic disc material has a high metal content that increases the co-efficient of friction by two times over a stock lining. This greatly increases rotational strength up to a 12,000 rpm burst point for high performance. South Bend Clutch Stage 2 Daily Driver clutch kits are recommended for daily performance, street, and moderate race vehicles. Select the kit designed for your application needs.

3.17 out of 5 stars ( 6 )

$559.77

Eaton Posi Performance Differentials

Big torque doesn't have to mean big traction problems. Eaton Posi Performance differentials combine carbon friction discs with precision-forged gears to give you great traction, even under higher torque loads. Plus, the carbon friction discs produce smooth, quiet performance for the life of your vehicle.

4.65 out of 5 stars ( 105 )

$696.99

COMP Cams Drag Race Camshafts

COMP Cams drag race camshafts are offered in four styles: hydraulic flat tappet, hydraulic roller tappet, mechanical roller tappet, and mechanical flat tappet. These cams are ideal for the performance demands of the dragstrip, as well as street, strip, Circle Track, and other applications. Over a hundred models are available; choose the camshaft designed for your vehicle and engine family.

4.85 out of 5 stars ( 33 )

$531.95

—

$574.95

Air Lift Load Controller II Air Compressors

Air Lift air compressors are designed for use with their Load Controller II systems. If you're looking for replacement compressors for your system, they provide the power that you need to inflate your air lines.

Not Yet Reviewed

$619.99

Fluidampr Harmonic Dampers

Using only three parts (a laser-welded sealed housing, an internal inertia ring, and highly viscous silicone fluid between the two), SFI-approved Fluidampr harmonic dampers can control all crankshaft vibration--not just a limited frequency range. As a result, you get reduced wear on the main bearings and timing gear, more stable valvetrain operation, and less chance of crank failure.

4.77 out of 5 stars ( 146 )

$528.00

QA1 Sway Bars

QA1 sway bars afford improved handling and control by reducing body roll. They're manufactured from lightweight 4130 chromoly steel and 1045 cold-formed steel—with a gloss black powdercoat finish for maximum strength, endurance, and corrosion resistance. The QA1 sway bars are precision CNC-formed, ensuring proper mounting in the stock location for a true bolt-on installation. They also feature adjustable end links to customize roll stiffness to your personal specifications. These sway bars from QA1 include greaseable graphite polyurethane bushings, along with high-quality zinc plated hardware. Engineered and road-tested to give your ride the grip that it needs to hold the road, QA1 sway bars are available for fitment on many vehicle applications. Order them individually for the front or rear—or in a complete kit.

4.57 out of 5 stars ( 141 )

$655.95

1992 CHEVROLET CAPRICE Parts and Accessories