1990 GMC | Summit Racing

ATK High Performance GM 350 Vortec 290 HP Stage 3 Long Block Crate Engines

ATK High Performance GM 350 Vortec 290 hp Stage 3 long block crate engines are perfect replacements for your worn out SBC. They are designed with matched components for reliable performance with extra "go power", and they require an electric fuel pump. ATK Stage 3 or complete dressed engines are engineered for those wanting to drop the engine into their project and fire it up. They have outfitted the engines as completely as possible to save you time and headaches. Typically ATK GM 350 Vortec 290 hp complete long blocks consist of: * OE block bored to 4.060 in. diameter with 2-bolt mains and a one-piece rear main seal * OE reground crankshaft with a 3.480 in. stroke * OE powder metal 5.7 in. length connecting rods * Hypereutectic 9.4:1 compression ratio pistons * Moly piston rings * Hydraulic roller camshaft (191/194 duration at 50, .414/.428 in. lift, 111 LSA) * Cast iron Vortec cylinder heads with 64cc combustion chambers, 165cc intake runners, and come with 1.94 in./1.5 in. valves. * Stamped steel 1.5 ratio rocker arms * Single roller timing set * 5 qt. oil pan ( will not fit Chevelle with steering behind crossmember, some Corvettes, and 1962-67 Chevy II) * Melling standard volume oil pump * Valve covers * Flexplate * ATK HP dual plane intake manifold * Distributor HEI * Cast iron long water pump * Front Powerbond balancer (internally balanced) * Pioneer externally balanced 168 tooth flexplate * Quick Fuel Brawler 670cfm carburetor * Autolite spark plugs (605) with 8mm wires

3.78 out of 5 stars ( 9 )

$3,625.99

TCI Super StreetFighter Transmissions

TCI Super StreetFighter transmissions bridge the gap between the StreetFighters and full Competition series transmissions. Like the StreetFighter units, these are equipped with 100 percent tested, manual/automatic valve bodies. That means that most units allow you to manually shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic. In either mode, you get a racetrack shift that bangs through the gears and shaves time off your ETs. When you use the manual gear selection feature, the Super StreetFighters upshift and downshift right when you move the lever, with no lag or governor override. When you select the normal drive position, the transmissions retain positive automatic shifts, for the ease of driving you look for in an automatic transmission.

3.86 out of 5 stars ( 59 )

$2,085.95

—

$3,478.95

Summit Bucks

Griffin Performance Fit Radiator Combos

Griffin Performance Fit combos offer the right fit with the right performance--and the right price! These high performance combos deliver cooling capability for extreme horsepower mixed with modern styling, do-it-yourself installation, and American craftsmanship. In these perfect combinations, Griffin packages their lightweight aluminum radiators constructed with 1.25 or 1.50 in. induction-welded MegaCool tubing, high performance electric fans, hand-formed aluminum shrouds, wiring harnesses, and radiator caps for a complete install. Choose the style and size needed to equip your ride with the ideal solution for engine temperature control--Griffin Performance Fit combos. * Griffin Performance Fit radiator combos may require modifications for installation. * See Griffin Exact Fit radiator combos for installation with no modifications.

4.01 out of 5 stars ( 240 )

$840.00

—

$997.00

Summit Racing™ Rear Lowering Leaf Springs

Summit Racing™ offers rear lowering leaf springs for a wide range of vehicles, from the 1960s and up. These suspension enhancements can give your car, truck, or SUV a more aggressive stance with improved ride quality. The leaf springs are available for a variety of lowered heights; order the model recommended for your application.

4.18 out of 5 stars ( 38 )

$134.99

QA1 1988-98 C1500 Level 2 Front Coilover Conversion Systems

QA1 1988-98 C1500 level 2 front coilover conversion systems are a great upgrade to your C1500 front suspension. Each kit comes with QA1's proven single adjustable Pro Coil coilover shocks—so you can change the valving to meet your specific needs—along with a variety of spring rate options. The shocks allow for wider wheel and tire combos, ride height adjustability, and are 100 percent dyno-tested and serialized. The QA1 C1500 upper and lower control arms are manufactured from 12-gauge HSLA steel tubing for increased strength and are powdercoated for long-lasting durability. The kit will provide a total of 4 in. of drop when used with drop spindles, or 2 in. of drop with factory spindles. Performance ball joints and low-friction, maintenance-free bushings are standard. Level 2 easy bolt-on kits will add more stability and allow for optimum camber adjustment in a lowered truck. Everything you need is included, all the way down to the hardware; no welding required.

4.71 out of 5 stars ( 7 )

$2,219.95

Summit Racing™ Direct-Fit Dash Pads

Summit 1981-87 dash pads are made to OEM specifications, they are made with foam-backed vinyl, like the originals with a protective UV coating to help prevent ultraviolet damage. Designed from GM Blueprints and materials, to fit and look like the originals. Each dash pad features steel reinforced inserts and uses all factory mounting locations and hardware. No modifications are needed for installation in your truck. Select the color to match or complement your interior. These are considered Best Quality parts.

4.5 out of 5 stars ( 8 )

$593.99

VEGE Chevrolet 350 C.I.D. Remanufactured Long Block Crate Engines

If the time has come to replace your tired old small block Chevy, then look no further than a VEGE Chevrolet 350 c.i.d. remanufactured long block crate engine. These long blocks are an excellent foundation for budget-minded builds, are a drop-in replacement for many 1987-95 GM vehicles—and can also be retrofitted into nearly any vehicle. VEGE Chevrolet 350 c.i.d. remanufactured long block crate engines create great low-end power, making them perfect for cruisers, street rods, trucks and even your daily driver. They can produce 250 horsepower and 350 ft. lbs. torque when equipped with 600CFM carburetor and a dual plane 4-barrel intake manifold. VEGE Chevrolet 350 c.i.d. remanufactured long block crate engines feature: * Remanufactured 2-bolt main cast iron engine block * Cast crankshaft * Cast connecting rods * 12.3cc Dish hypereutectic pistons * 8.5:1 Compression ratio * Cast iron cylinder heads with 76cc combustion chambers * 1.94 in. Intake valves, 1.50 in. exhaust valves * Standard small Chevy exhaust bolt pattern * Uses standard 14mm x 1.25 thread, taper seat, 0.441 in. reach spark plugs * Hydraulic flat tappet camshaft * 0.383 in. Intake lift, 0.401 in. exhaust lift * Duration at 0.050 in. lift 194 int./202 exh. * 112 degree lobe separation * Oil pan with passenger side dipstick * Steel timing cover * Steel valve covers Drop-In replacement applications: * 1990-92 Cadillac Brougham * 1987-94 Chevrolet Blazer * 1988-95 Chevrolet C1500 * 1992-95 Chevrolet C1500 Suburban * 1988-95 Chevrolet C2500 * 1992-95 Chevrolet C2500 Suburban * 1988-95 Chevrolet C3500 * 1989-89 Chevrolet Caprice * 1987-95 Chevrolet G10 * 1987-95 Chevrolet G20 * 1988-95 Chevrolet K1500 * 1992-95 Chevrolet K1500 Suburban * 1988-95 Chevrolet K2500 * 1988-95 Chevrolet K3500 * 1987-89 Chevrolet P20 * 1988-95 Chevrolet P30 * 1987-87 Chevrolet R10 * 1987-88 Chevrolet R10 Suburban * 1989-91 Chevrolet R1500 Suburban * 1987-88 Chevrolet R20 * 1987-88 Chevrolet R20 Suburban * 1989-89 Chevrolet R2500 * 1989-91 Chevrolet R2500 Suburban * 1989-91 Chevrolet R3500 * 1995-95 Chevrolet Tahoe * 1987-87 Chevrolet V10 * 1987-88 Chevrolet V10 Suburban * 1989-91 Chevrolet V1500 Suburban * 1989-91 Chevrolet V2500 Suburban * 1989-91 Chevrolet V3500 * 1989-95 GMC C1500 * 1992-95 GMC C1500 Suburban * 1989-95 GMC C2500 * 1992-95 GMC C2500 Suburban * 1989-95 GMC C3500 * 1987-93 GMC G1500 * 1987-95 GMC G2500 * 1988-95 GMC G3500 * 1987-91 GMC Jimmy * 1988-95 GMC K1500 * 1992-95 GMC K1500 Suburban * 1988-95 GMC K2500 * 1988-95 GMC K3500 * 1988-89 GMC P2500 * 1989-95 GMC P3500 * 1987-87 GMC V1500 * 1987-91 GMC V1500 Suburban * 1987-87 GMC V2500 * 1987-91 GMC V2500 Suburban * 1987-91 GMC V3500 * 1993-95 GMC Yukon

3.72 out of 5 stars ( 25 )

$2,899.99

IHC Suspension Control Arms

IHC Suspension offers replacement control arms for countless truck applications—including models from Chevrolet, GMC, Ram, and Ford. The steel tubular arms are black powdercoated to resist rust and corrosion. Most of the kits include adjustable control arms to achieve the desired ride height, along with ball joints, polyurethane bushings, and hardware. Order the control arms recommended for your vehicle.

5.0 out of 5 stars ( 7 )

$780.00

Summit Racing™ Metallic-Ceramic Coated Headers

They improve performance, keep heat contained, look fantastic, and have a sweet Summit Racing™ price--they're Summit Racing™ metallic-ceramic coated headers! These headers are meticulously crafted with high-quality steel tubing to remove exhaust gases with maximum efficiency and minimal power loss. Cyclical welds eliminate distortion, while heavy-duty 5/16 in. machined flanges eliminate leaks. Finishing these Summit Racing™ headers is a polished, metallic-ceramic thermal barrier coating, which not only extends service life by controlling underhood temperatures and fighting thermal fatigue and corrosion, but it also looks absolutely awesome! Factory header paint lasts a few minutes and just can't compare to the longevity of these Summit Racing™ metallic-ceramic coated headers. These headers are designed for off-road and racing use only, unless otherwise noted, and include gaskets, mounting hardware, and collectors. Gain performance and looks under the hood with Summit Racing™ metallic-ceramic coated headers.

4.2 out of 5 stars ( 439 )

$405.99

Odyssey Drycell Batteries

Odyssey sealed rechargeable drycell batteries provide high engine-cranking pulses and are capable of 400 deep cycles. They can be installed on their sides or at any angle and have a 2-year storage life at 25 degrees C.

4.86 out of 5 stars ( 235 )

$429.99

—

$523.99

TCI Heavy-Duty RV Transmissions

For hauling heavy loads or for taking a trip across the country, TCI heavy-duty RV transmissions were designed with you in mind. They're built for strength, and they'll provide long, dependable service, as well as delivering maximum fuel economy. They have special valve-body modifications that increase fluid flow and improve shift characteristics, without the harsh feel of racing transmissions; and they include a low-gear package for pulling heavy loads.

3.67 out of 5 stars ( 3 )

$2,349.95

TCI StreetFighter Transmissions

TCI StreetFighter transmissions are durable enough to withstand the rigors of even the toughest street machines. Equipped with a manual/automatic valve body, most units allow you to manually shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic. In either mode, you get a race track shift that bangs through the gears and shaves time off of your ETs. When you use the manual gear selection feature, the StreetFighters upshift and downshift right when you move the lever, with no lag or governor override. When you select the normal drive position, they retain positive automatic shifts for the ease of driving you look for in an automatic transmission.

3.58 out of 5 stars ( 146 )

$3,124.95

Calvert Racing Split Mono-Leaf Springs

Engineered for drag racing, Calvert Racing split mono-leaf springs have a higher spring rate and a stiffer ride than stock springs. Tested on the fastest stock suspension cars in the world, they are designed to control and reduce excessive body separation in rear suspension and plant the rear tires without unloading. The parabolic rear-half design distributes the main spring pressure point through the length of the half, reducing spring breakage. Calvert Racing split mono-leaf springs are assembled to order with Grade 8 hardware, heavy-duty alignment clamps, front aluminum bushings, and rear polyurethane bushings. They are stress-relieved and arch verified, available in several ride height options, and have been proven to withstand over 2,500 hp at 1/4 mile ETs in the 6s. Choose the springs designed for your vehicle.

4.68 out of 5 stars ( 50 )

$460.00

Wilwood Forged Narrow Superlite 6R Big Brake Front Brake Kits

Wilwood forged narrow Superlite 6R Big Brake front brake kits upgrade your late model ride with increased brake capacity and complimentary style. They're application-specific for a simpler installation and offer full compatibility with OE master cylinder output and ABS functions, where used. These front brake kits feature the extremely durable and efficient body design of their forged narrow 6-piston radial mount calipers. You can choose from optional caliper finishes and rotor designs to meet your personal style and braking requirements. Don't just replace—upgrade to generate big stopping power with Wilwood forged narrow Superlite 6R Big Brake front brake kits.

4.78 out of 5 stars ( 103 )

$1,373.13

—

$2,477.60

ATK High Performance GM 350 TBI 290 HP Stage 1 Long Block Crate Engines

Give your truck a breath of fresh life with ATK High Performance GM 350 TBI 290 hp Stage 1 long block crate engines. These engines are designed to replace your old tired mill with a fresh unit that has a little bit more kick. These engines feature upgraded internals to help them pump out 290 hp and 370 ft.-lbs. of twist that will get your pickup or muscle truck moving. ATK GM 350 TBI 290 hp Stage 1 long block crate engines include: * Handpicked, remanufactured blocks * OE cast iron TBI cylinder heads * OE crankshaft and connecting rods * Hypereutectic pistons * Hydraulic roller camshaft * Valve covers * Timing cover and timing set * Oil pan, pump, and pickup tube

3.0 out of 5 stars ( 6 )

$3,034.99

Kooks Headers Race Long Tube Headers

Kooks Headers race long tube headers will deliver high performance to your racer. Their full-length race headers are built from T-304 stainless steel and are available in several primary tube and collector diameters to match your application needs. Optimize scavenging and increase power with top-quality Kooks race long tube headers.

4.83 out of 5 stars ( 66 )

$1,354.69

Flaming River 1988-98 Chevy C1500 Truck Power Rack and Pinion Cradle Kits

Flaming River 1988-98 Chevy C1500 truck power rack and pinion cradle kits are direct bolt-ins with precision welded cradles manufactured using a 3/8 in. steel plate to assure there is no flexing. Each kit adapts to the original steering column and includes a new slip shaft with U-joints and a hose kit. They have been designed for use with the original power steering pump and the travel bar maintains original geometry. Features: * Designed for use at factory ride height or with 4/6 lowering kit * Solid plate 3/8 in. steel for increased strength * Bolts in place of steering box and idler arm using OE mount locations * Precise, modern steering with no cutting, drilling, or welding to chassis * Features new front steer power rack and pinion * Rack and pinion features .98 in. rack shaft for increased strength * Billet servo valve for cooler operation * Lifetime serviceability and Flaming River tested and certified Power rack and pinion cradle kit includes: * Mounting hardware * Universal joints and shafts * Rack and pinion cradle system

Not Yet Reviewed

$2,609.99

Westin Fey Diamondstep Bumpers

These universal-style Westin Fey Diamondstep bumpers have classic lines, a ribbed design that adds to the appearance and strength, and are made from heavy 12-gauge tempered steel. The hitch plate features a 90 degree angle for increased towing capacity, as well as added steel welded into high-stress areas for greater strength while towing. They are made for all full size, midsize, and compact pickups and are safety-tested and V5-certified. They come available in black or silver powdercoated and chrome plated finishes.

4.36 out of 5 stars ( 223 )

$269.99

—

$544.99

Coker Firestone Vintage Bias-Ply Tires

If you need tires for a restoration or custom rod, you may well be looking for bias-ply tires. Coker Firestone vintage bias-ply tires feature authentic sidewall markings and original Firestone tread pattern designs. These tires are built using safer and more reliable modern materials and techniques, but also use the original molds to deliver classic looks. Firestone bias-ply tires were OE fitments for many domestic as well as a number of import models. Coker offers the best selling lines of classic tires in the world, with hundreds of fitments and styles available.

4.79 out of 5 stars ( 172 )

$348.00

—

$459.00

Summit Racing™ Rear Drum-to-Disc Brake Conversion Kits

Our Summit Racing™ rear drum-to-disc brake conversion kits take the guesswork and high price tag out of building a braking system. They're available in a variety of sizes and rotor styles for different axle models and housing flanges. Order the kit recommended for your vehicle application. Summit Racing™ rear drum-to-disc brake conversions include: * Rotors * Calipers * Mounting brackets * Brake hoses and banjo bolts * Installation hardware

4.09 out of 5 stars ( 235 )

$671.99

—

$884.99

On Sale

Summit Racing™ Sportvisor Cab Visors

Keep your cool, lose the glare, and look good doing it with one of these Summit Racing™ Sportvisor or lighted Sportvisor cab visors. Designed to fit the exact contours of your truck, their lightweight fiberglass body is finished with an easily painted white gelcoat. These truck sun visors come with self-tapping hex screws and easy-to-follow instructions. The lighted versions also include an easy-to-install wiring harness that can be completely hidden.

4.62 out of 5 stars ( 479 )

$279.99

—

$389.99

$251.99

—

$350.99

QA1 1988-98 C1500 Rear Coilover Conversion Systems

QA1 1988-98 C1500 rear coilover conversion systems are a great upgrade to your C1500 suspension. Each kit comes with QA1's proven adjustable coilover shocks—so you can change the valving to meet your specific needs—along with a variety of spring rate options. These shocks allow for ride height adjustability and are 100 percent dyno-tested and serialized. The QA1 C1500 torque arm suspension with C-notch bracket is manufactured from 12-gauge HSLA steel tubing for increased strength and powdercoated for long-lasting durability. Systems come complete with adjustable instant center, panhard bar, and pinion angle to allow you to adjust the system to your exact needs. This easy bolt-on kit will add more stability and allows for optimum camber adjustment in a lowered truck. Everything needed is included, all the way down to the hardware; no welding or bed removal required.

4.33 out of 5 stars ( 3 )

$2,887.95

—

$3,101.95

ATK High Performance GM 383 TBI Stroker 320 HP Stage 1 Long Block Crate Engines

Experience the torque that only a stroker can give you with ATK High Performance GM 383 TBI Stroker 320 hp long block crate engines. These engines crank out 320 hp and 395 ft.-lbs. of torque, perfect for your pulling rig, RV, or muscle truck. They are hand-assembled and precisely balanced to create smooth-running, reliable engines for your ride. ATK GM 383 TBI Stroker Stage 1 long block crate engines include: * Handpicked, remanufactured blocks * OE cast iron TBI cylinder heads * Nodular steel crankshaft and 4340 I-beam connecting rods * Hypereutectic pistons * Hydraulic roller camshaft * Cam lift- .435 int./.462 exh. * Cam duration at 0.50- 198 int./210 exh. * 9.5:1 compression * Valve covers * Timing cover and timing set * Oil pan, pump, and pickup tube

1.0 out of 5 stars ( 1 )

$3,998.99

Wilwood Forged Dynalite Rear Parking Brake Kits

Wilwood forged Dynalite rear parking brake kits provide the best solution for many rear axles requiring a parking brake. The forged billet Dynalite 4-piston calipers, one-piece drum/rotors, and high-friction pads provide balanced braking for all types of performance street, strip, and show machines. Their internal shoe parking brake design stays hidden, but has excellent static holding power for parking. Wilwood offers optional caliper finishes and rotor designs to enable the builder to personalize the style and optimize brake performance for every individual application.

4.58 out of 5 stars ( 123 )

$1,392.51

1990 GMC Parts and Accessories