Availability
Odyssey Performance Series batteries are designed to handle the increased use of on board accessories in today's vehicles. They combine long service life, high reliability, and deep cycle capabilities. Performance batteries provide all the reliability of the Odyssey Extreme Series batteries, without the high cold cranking amps or reserve capacity many people may not require. The Performance Series batteries contain flat plates made of 99.99 percent pure lead--not lead alloy, like many conventional batteries.
( 63 )
$363.99
Procar Series 1614 seats are perfect to reinforce a traditional, classic look for your interior. They feature stylish vertical stitching, sleek lines, and side bolsters for maximum support and comfort. The adjustable bucket seats incline and recline via lever control. Each seat is built with TIG-welded steel tubing, injection-molded foam, and suspension straps for support and comfort; and sliders are included. Procar Series 1614 seats are available for the driver or passenger side, in a choice of material and colors.
( 3 )
$295.99
XS Power XV Automotive Series lithium batteries are lightweight, powerful, and offer five times the life over lead acid and AGM batteries. These Lithium Titanate batteries are available for automotive applications in many common BCI group sizes for a direct fit in your vehicle.
( 5 )
$499.99
Odyssey sealed rechargeable drycell batteries provide high engine-cranking pulses and are capable of 400 deep cycles. They can be installed on their sides or at any angle and have a 2-year storage life at 25 degrees C.
( 224 )
$279.99
CSF racing radiators feature the most advanced and efficient radiator cores in the industry. Offered for both vehicle-specific and universal applications, they use innovative tube and fin technologies with industry-leading testing methods to maximize airflow and heat dissipation. Specially engineered tubes in the shape of a "B" are carefully formed and then brazed over the seam. CSF is able to use thinner and lighter aluminum because this design is stronger than normal welded "O" shape tubes. With the inlet in the middle of a seam-brazed tube, the surface area of the tubes is increased approximately 15 percent over regular tubes. With CSF's B-tubes you get dual liquid laminar flow and the efficiency of two smaller tubes vs. one large tube in the same space. High-efficiency, multi-louvered fins are precisely aligned to maximize airflow through each radiator core. Fin specifications are carefully measured and calculated for each application, and tested for maximum heat rejection efficiency in CSF's wind-tunnel lab. CSF offers two all-aluminum end-tank designs to match any style and performance needs. CSF 7000 Series racing radiators have OE-style radial tanks that are flat, rounded, and welded together. Perfect for the customer who likes the sleek and smooth look, and wants to display the intricate welding. CSF deep-drawn end tanks are stamped to the same geometry of OE plastic end tanks. The only high performance manufacture to feature this advanced radiator technology; CSF deep-drawn end tanks feature less welding, and are generally considered the strongest tanks in the industry. Additional features of CSF racing radiators include: * Finished with CSF's Show-Stopper mirror polish process * CAD/CAM designed * Racing-style aluminum drain plug * Brazed in a controlled atmosphere brazing (CAB) furnace—the preferred process for aluminum * ISO 9001/9002 certification * Military-grade (special clad) aluminum used for tubes, fins, and headers * Plates and side brackets meet JIS 3003 specifications * Privately owned factories with full in-house tool rooms * CNC-machined fittings * TIG welded
( 36 )
$369.00
—
$529.00
Maradyne Mach Two series truck electric fans feature dual 225 W high performance IP68 sealed motors attached to dual 11 in. diameter 5-blade fans to put out over 2,500 cfm of airflow. They have all glass-filled nylon construction and include dual harnesses for an easier installation. The fans are available with different mounting bracket positions, so you can match up with your radiator mounting style.
( 15 )
$372.01
Antigravity Batteries Re-Start batteries have built-in jump-start and full management systems. They intelligently monitor their own voltage, and just before going completely dead, they promptly initiate sleep mode with just enough energy to get your vehicle started again. Simply press the restart button located on the battery, start your vehicle and drive away. These are extremely lightweight and high-power lithium-ion replacements for your heavy lead/acid batteries. They're available for most modern motorcycles and ATV/UTVs. No more dead battery emergencies or being stranded with Antigravity Batteries Re-Start batteries! Features and specs: * Up to 2 times the cranking power and lifecycle of heavy lead/acid batteries * Up to 70 percent lighter than heavy lead/acid batteries * Management system offers low-voltage cutoff, over-charge/over-discharge protection, lithium cell balancing, and thermal protection * 4 terminal posts for ease of use with right or left side connections and any orientation (no liquids to spill) * Capable of holding a charge for up to one year when no parasitic drains (alarms, GPS, etc.) are present * Shock and vibration resistant for durability * No acids or heavy metals for lower environmental impact
( 13 )
$449.99
Maradyne Mach One series electric fans feature a quiet, reversible 225 W motor, so they can be used as a puller or pusher, depending on your space constraints. They have a glass-filled nylon shroud and blade and are high-temperature and impact-resistant for harsh underhood temperatures and greater resistance to flying road debris.
( 1 )
$285.53
—
$370.40
Sikky Manufacturing low-profile steering shaft assemblies include two joints, a shaft, and hardware to help provide you with a high-quality, direct replacement steering shaft that will increase precision and provide sharper steering response. The rag joints typically used in the OEM shaft have been removed, which eliminates the sloppy and less-responsive feel that is common with those models. Using precision CNC components allows for an extremely rigid and responsive feel, making for a nice upgrade to your factory setup. They are also ideal for LS swapped builds that require extra clearance. Order the Sikky Manufacturing low-profile steering shaft assembly best suited for your application.
( 1 )
$265.99
Replace your OEM muffler with one of these Walker Quiet-Flow 3 mufflers. Manufactured in both steel and stainless steel versions, their turbo-style configuration provides great interior and exterior sound control without decreasing exhaust flow. Available for cars, trucks, and SUVs, Walker Quiet-Flow 3 mufflers give your OEM exhaust the perfect sound that you have been looking for.
( 465 )
$263.99
Hawk Performance DTC 70 brake pads have extremely high torque with aggressive controllable initial bite. Their superior release and torque control characteristics are perfect for the high performance racing industry. DTC 70 brake pads were designed for cars with high deceleration rates with or without downforce. Order the set recommended for fitment with your caliper type.
( 20 )
$262.79
—
$315.89
SCE Vulcan cut-ring head gaskets are hybrids forged to harness the best sealing properties of two head gasket types—composite and stainless steel. With no sealant needed, the pliable, perforated metal-core composite bodies eliminate coolant and oil leaks, while the solid stainless steel cut-rings "bite" into the cylinder head forming a positive barrier against combustion pressure leaks—without machining. SCE Vulcan cut-ring head gaskets are designed for use with high-static compression or forced-induction engines, which are prone to combustion pressure leaks when using typical composite or MLS head gaskets.
( 17 )
$285.79
RetroSound radios are modular units that allow you to select the radio face that is most period-correct for your classic vehicle and pair it with a selection of radio motors for a choice of audio features and connectivity. RetroSound's Grand Prix Motor 1B radios perfectly complement the interior styling of the 1980s European vehicles, while updating the audio technology to today's standards. The unique design of the Grand Prix radio faces feature authentic paddle-style controls along with low-profile push-buttons and a 32,000 color digital display. They include a new DIN kit that makes it easy to install and achieve a factory-like fit. * Motor 1B set includes: -- Built-in Bluetooth (Version 5.0) -- Includes Bluetooth microphone for hands-free calls -- Made for iPod/iPhone -- AM/FM RDS tuner with 30 presets -- Selectable tuner frequencies USA/EUR/AUS/JAP/RUS -- USB port for flash drives and other devices -- 2.1-amp device charging via USB -- Built-in 300-watt (peak power) Mosfet amplifier -- 25 watts RMS x 4 channels -- Dual RCA pre-outs for external amplifiers -- Dedicated subwoofer output -- 32,000 color display -- Non-volatile memory -- 1-Year Warranty
Not Yet Reviewed
$363.99
Cometic MLS head gaskets are constructed from multiple layers of stainless steel for strength and contain load-controlled embossments that conform load distribution across the sealing area. This creates an exceptional seal by requiring less clamp load—resulting in less bore distortion. The stainless steel outer layers utilize FKM (Viton®) rubber coating, a high-temperature and chemical-resistant polymer. A topcoat of PTFE aids in resistance to fret and increased cold sealing. MLS head gaskets are available for most aftermarket cylinder heads; as with all of Cometic's MLS head gaskets, no sealants or re-torque is required.
( 546 )
$262.49
—
$277.52
Standard Motor spark plug wire sets will provide your ignition system with new life. They're high-quality, direct-fit OEM replacement wires that are tailor-made to restore efficiency and performance. These sets are manufactured to factory specifications and are pre-terminated, so they can be installed with no modifications. Order the spark plug wires designed for your vehicle application.
( 110 )
$331.99
—
$435.99
Carter OE replacement electric fuel pumps are manufactured in a plant that is TS16949 certified and provides the absolute latest in OE-quality certifications. This dedication to excellence, combined with in-depth OE experience, results in products that provide dependable performance that meet or exceed expectations. Carter OE replacement electric fuel pumps feature: * Factory-specified pressure and flow * OE-matched electrical connections * Accurate diameter and length * Original inlet and outlet positions * 100 percent factory-tested reliability * Roller vanes, which are more contaminant-tolerant than other designs * Carbide and brass bearings instead of plastic for longer life and smoother operation
( 182 )
$353.99
—
$395.99
Putco Nitro-Lux LED bulbs deliver powerful illumination for maximum down-the-road punch! Each of these slimmer LEDs are packed with high-tech features, including a patented heat sink with exclusive solid state design for maximum performance, long life, and superior scientifically proven heat mitigation. It's time to light up the night with Putco Nitro-Lux LED bulbs. Features include: * CSP LED—6,500 K color temperature and 5,000 lumens * Fully anodized non-reflective nickel finish to eliminate light ray interference inside lamp * Easy-Clock collar allows for quick and easy adjustment of light beam * 20mm heat sink depth--slimmer footprint to fit into the minimal housing space of modern headlamps * Smaller anti-flicker driver box--miniature capacitors eliminate external anti-flicker module; Tough seal advanced polymer is 100 percent waterproof * Braided sleeve is UV radiation-resistant and abrasion-resistant polyethylene terephthalate monofilament fibers—has a wide operating temperature range * Precision terminal systems--fit perfectly with existing OEM harness, is 100 percent water- and dust-proof; twist-lock and slide pressure locks offer OEM guarantee flawless contact points * 1-year warranty
Not Yet Reviewed
$265.99
National Cycle Plexistar 2 windshields offer ample protection, sporty looks, and quick installation, adjustments, and removal. They feature National Cycle's patented QuickSet hardware to work in conjunction with their also-patented No-Hole Ballsocket system. These shields are made from high-impact acrylic with crystal clarity. The systems are chemically bonded--not drilled--to the windshield, so there are no holes, no cracks, and no breakage to deal with. And the special hardware makes the whole thing hassle-free. The shields are cut a bit larger around the headlight opening and the extended lowers are shorter. Leave them on or take them off--it's easy with Plexistar 2 windshields from National Cycle.
( 4 )
$251.96
SPEC Stage 2 Plus clutch kits are designed for street, drag race, pulling, and autocross use. They feature a multi-friction disc in a full-faced configuration with carbon semi-metallic material on one side and Kevlar® on the other. Bridging the gap between SPEC Stage 2 and Stage 3 clutch kits, the 2+ offers drivability and engagement quality characteristics of the Stage 2, but with a 15 to 20 percent higher torque capacity. Hubs are double-sprung with spring cover reliefs for flexibility—and heat-treated components for strength and durability. More than 700 models are available for vehicle-specific applications. Additional features of SPEC Stage 2 Plus clutch kits: * High-clamp pressure plate * Hybrid carbon-graphite and Kevlar® friction material * High-torque sprung hub and disc assembly * Bearing and tool kit included * Also great for road racing, rally, and drifting
( 7 )
$490.50
—
$539.10
Rhodes Race Cars competition roll cages meet or exceed NHRA and IHRA requirements (when properly installed). Available in 4, 6, 8, and 10-point models, all RRC bars are precision bent for each particular body style and feature notched tube ends (where applicable) for ease of installation. Increase chassis stiffness, and race safe with Rhodes Race Cars competition roll cages. RRC roll bars and cages are available in the following materials: * 1-3/4 in. x .134 in. wall mild steel tubing * 1-3/4 in. x .120 in. wall DOM tubing * 1-3/4 in. x .083 in. wall 4130 chromoly tubing The 4-point kits include main hoop, rear braces, seat crossmember, and four steel mounting plates. The 6-point kits include main hoop, rear braces, side bars, seat crossmember, and six steel mounting plates. The 8-point kits include main hoop, rear braces, side bars, frame supports, seat crossmember and 6 steel mounting plates. The 10-point kits include everything in the 8-point kits, plus a roof hoop, windshield runners, and dash crossmember. Note: Because of differing driver positions and main hoop locations, roof hoop and windshield down bars are not notched!
( 140 )
$334.95
—
$534.95
Clutches are subjected to continuous wear and tear. LuK clutch kits are made with premium quality components, engineered and manufactured to be problem-free. These kits are functionally tested to meet OEM performance specifications and provide an innovative and quality engineered clutch kit. As an original equipment supplier, LuK develops the performance specifications for individual vehicle applications.
( 377 )
$467.99
—
$487.99
The RetroSound Grand Prix Motor 4 radios are the perfect solution for updating the audio in your classic BMW, Mercedes, and Porsche vehicles while maintaining the original style of the factory electronics. Retro Manufacturing radios are a modular design, this allows for a more adjustable fit and to offer different style options. The unique design of the Grand Prix Motor 4 model features authentic paddle-style controls, along with low profile push-buttons. A new Din kit is included with the Grand Prix radio to make the radio easy to install and achieve a factory-like fit. Features of the Grand Prix Motor 4 radios: * HD Radio Technology * SiriusXM-Ready (SXV300V1 tuner sold separately) * Built-in Bluetooth (Version 5.0) * Includes Bluetooth microphone for hands-free calls * Made for compatibility with iPod/iPhone * AM/FM RDS tuner with 30 presets * Selectable tuner frequencies USA/EUR/AUS/JAP/RUS * Auxiliary input for portable devices * Two USB ports for flash drives and other devices * 2.1-amp device charging via USB * Built-in 300-watt (peak power) Mosfet amplifier * 25 watts RMS x 4 channels—TrueRating * Dual RCA pre-outs for external amplifiers * Dedicated subwoofer output * 32,000 color display * Non-volatile memory * Optional add-on accessories available at additional cost * Limited 2-year manufacturer warranty
Not Yet Reviewed
$438.99
SPEC Stage 1 clutch kits are designed for street, drag race, drifting, road race, rally, pulling, and autocross use. They feature integrally molded carbon-Kevlar® based, high performance organic linings that offer smooth engagement and excellent life. These linings have an integrally bonded steel backing for strength under high clamp loads and temperatures. Hubs are double-sprung with spring cover reliefs for flexibility and heat-treated components for strength and durability. Nearly a thousand different kits are available for countless applications, from the 1940s and up. Additional features of SPEC Stage 1 clutch kits: * High-clamp pressure plate * Steel-backed and multi-compound woven organic material * High-torque sprung hub and disc assembly * Best for street and many track and off-road applications
( 18 )
$409.50
—
$512.10
These expansion tanks are perfect for cars with low-mount radiators to provide a convenient filling location and to bleed off unwanted air. Versions are now available with rugged 6061-T6 billet aluminum filler necks welded to the tank to withstand the continuous removal and installation of the cap. They're 100 percent pressure- tested to eliminate leaks, and they accept a standard-size radiator cap (not included).
( 104 )
$423.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
