Availability
Showing In Stock Items. Show All 104 Items.
Air Lift WirelessAir 2nd generation on-board air compressor EZ mount systems give you everything you need for the fastest, easiest installation possible. EZ Mount systems package the manifold and upgraded, heavy-duty compressor into one convenient, pre-assembled and factory-tested bracket—giving you everything you need to have full control of your air springs in no time at all. Control the air like a boss with your Air Lift WirelessAir 2nd generation EZ mount kit. Features and items: * Inflate and deflate each air spring independently to different pressures * LCD-display wireless controller * One-touch control from inside or outside vehicle is perfect for uneven/top-heavy loads * Two user-defined memory buttons * Compact, dual-path design * Bluetooth-enabled manifold allows for over-the-air software updates * All wiring, hardware, and fittings required for installation
( 8 )
$799.95
MagnaFlow Street Series performance exhaust systems deliver the smooth, deep sound you want—and the wide-open performance power you need! They feature straight-through flow designs for the ultimate in unrestricted horsepower and torque, while maintaining exhaust efficiency. These kits are an engineered balance of interior and exterior noise levels and are tested against SAE j1169 standards. Street Series components are built with 409 stainless steel and all mandrel-bent tubing. They're available in numerous configurations, including cat-back, rear axle-back, crossmember-back, and rear section; single, dual, tri, or quad turbo mufflers; and several outlet and tip options. Order the MagnaFlow Street Series performance exhaust tailored for your specific make and model. The systems carry a lifetime construction warranty.
( 608 )
$771.00
UMI Performance bolt-in Viking rear coilover kits allow full ride height, spring rate, and damping adjustability. The double shear upper mount is a direct bolt-in and holds a true 2.5 in. diameter coilover spring. The FEA designed lower bracket bolts in using the standard shock mounting hole as well as an additional reinforcement hole. Drilling one 3/8 in. hole per side is required to complete installation. The coilover kits utilize Viking shocks that are 19-way adjustable in both compression and rebound to ensure the perfect setting for every application. Viking shocks are fully rebuildable. The 2.5 in. diameter coilover springs are available in 14 in. long, 110 lb. spring rate for drag use; 14 in. long, 125 lb. spring rate for street use; and 12 in. long, 150 lb. spring rate for autocross and road race applications. The coilover kits have been tested with 1.5 in. diameter UMI trailing arms, as well as UMI's 22mm sway bar and 32mm drag anti-roll bar. Fitment with other brand sway bars and larger diameter control arms is not guaranteed. Please contact UMI for additional information regarding fitment. Key features: * Brackets manufactured entirely from 3/16 in. mild steel * Laser-cut brackets for consistency and a precise fit * TIG-welded for superior strength and clean looks * Powdercoated brackets for a long lasting finish * Viking double-adjustable shocks offer 19 compression and 19 rebound adjustments * 3 spring rate options, depending upon application * Bolt-in design * No welding required * Spacers included for use with control arm relocation brackets
( 10 )
$909.99
On Sale
Edelbrock Performer RPM aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. These heads offer improved power throughout the RPM range for greater throttle response and top-end horsepower. Countless options are available; order the model recommended for your vehicle and engine application.
( 165 )
$1,079.50
$971.55
Yukon Gear & Axle ring and pinion gear and installation kit combos are complete packages that include front, rear, or front and rear ring and pinion sets, along with the most complete master overhaul kits on the market—giving you everything needed to re-gear the front and/or rear differentials in one package. Conceived to handle some of the harshest conditions, these combos utilize the latest design and manufacturing technologies to afford you quiet running gear that's strong and easy to set up. The included Yukon master rebuild kits undergo extensive research to ensure a perfect fit and hassle-free install with the very best components. Order the combo designed to fit your application.
( 13 )
$750.99
—
$852.99
Doug's Headers has long been recognized of as one of the premiere exhaust header manufacturers in the performance industry. Since1958, they have been producing high-quality, hand-built, mandrel-bent exhaust headers. Each and every header is tuned with the proper tube size and length to efficiently remove all of the exhaust from each cylinder, reducing pumping losses, and resulting in dramatic increases in horsepower and torque. Doug's headers are carefully developed on the vehicles that they are intended to fit and are re-checked numerous times during the design and manufacturing process. Their designs include mid-length headers, Tri-Y headers, and long tube headers, plus manifold replacement headers. Their headers come with all the necessary mounting hardware, collector reducers or connector pipes, premium extra-thick gaskets, and detailed installation instruction sheets. The gaskets are rated up to 1100 degrees F, pressures to 3700 psig (255 bar), and are designed for an exact port match with their headers. Doug's Headers offer a choice of finishes: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier that significantly lowers under hood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw steel is available for individual customizing Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 704 )
$750.10
—
$1,051.95
Aeromotive Gen II Stealth fuel tanks utilize patented and award-winning Phantom technology. This enables a quiet, high-flow EFI pump and baffle to maintain ample fuel supply around the inlet of the pump—which, in turn, ensures consistent fuel delivery and drivability even in low fuel conditions. The tanks feature outlet and return ports, along with electrical terminals positioned in the OEM location. This design enables flush installation to the vehicle floor and will not require strap modification or spacers. All Gen II Stealth tanks come out of the box completely assembled. The fuel pump, fuel level sending unit, and fuel/electrical bulkhead are pre-installed. As a true plug-and-play assembly, an Aeromotive Gen II Stealth tank will get you out of the garage and on the road in no time. Order the model recommended for fitment on your vehicle.
( 68 )
$792.28
On Sale
All Edelbrock aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. They offer improved power throughout the rpm range for greater throttle response and top-end horsepower. The intake and exhaust runners are CNC-machine profiled for superior flow and performance.
( 41 )
$1,079.50
$971.55
Big torque doesn't have to mean big traction problems. Eaton Posi Performance differentials combine carbon friction discs with precision-forged gears to give you great traction, even under higher torque loads. Plus, the carbon friction discs produce smooth, quiet performance for the life of your vehicle.
( 104 )
$777.99
Here's an easy way to convert your stock rear suspension to a coilover suspension. You get everything you need with these QA1 Rear Pro coilover systems, from shocks to nuts and bolts, complete installation instructions, and even decals!
( 104 )
$886.95
Designed for the pro-touring GM enthusiasts, QA1 GM 2.0 pro-touring control arms are a simple upgrade over original suspension or worn and outdated tubular control arms. The pro-touring arms are also for those wanting to improve their overall handling, ride quality, and vehicle stance. These arms will improve suspension geometry over the factory configuration and pave the way for planning additional upgrades. The high-strength, low alloy steel enables optimized thinner wall construction and results in overall lighter weight. The increased positive caster design improves straight line stability. Pro-touring arms also feature QA1's stronger, low maintenance, and rebuildable ball joints which feature integrated dust boots. Note: These control arms are not compatible with OE-type springs, a coilover system must be installed. QA1's arms will accept factory type sway bars and include upper and lower bump stops.
( 16 )
$944.95
COMP Cams Xtreme Energy cam and lifter kits are built to take advantage of the latest cam technology and provide maximum performance. Whether your use is off-roading, towing, or street performance, there are Xtreme Energy options available for you. By using an aggressive lobe profile, they provide better throttle response and more top-end horsepower than equivalent kits from other manufacturers, while delivering increased engine vacuum. Order the model designed for your vehicle and engine application.
( 388 )
$816.95
On Sale
With Hooker Super Competition headers, the objective has always been to make the maximum horsepower possible and put it at the optimum point in the power curve. Hooker Super Competition headers feature tuned primary tubes to create optimum pressure between the intake and exhaust systems. Hooker Super Competition headers include premium exhaust gaskets and new mounting bolts. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 228 )
$949.95
$853.95
COMP Cams short travel hydraulic roller lifters have been engineered from a patent-pending design that specifically performs at higher engine speeds. They're designed to limit the lifter's internal piston as it is pumped up. By limiting that movement, the COMP Cams short travel hydraulic roller lifters cut down on the loss of power and limit valvetrain failure at higher rpm. The lifters are REM-finished and then black oxide coated for extreme durability, even for those high-revving engines. Choose the size, quantity, and other options tailored for your high performance application.
( 8 )
$781.95
RAM Concept 10.5 dual-disc organic clutch kits usher in a new era of RAM clutch design. The Concept kits introduce modular dual-disc systems with effective performance improvements. Perfected design, better performance, and a competitive price ... what an idea! Designed for use on applications with horsepower rating of up to 750. RAM Concept 10.5 dual-disc organic clutch kits feature: * Higher clamp load 10.5 in. pressure plate offers smooth pedal effort and more surface area to dissipate heat * Poly-coil sprung hub top disc allows for dampening on engagement to eliminate harsh starts and transmission fatigue * Billet modular stands are precision-machined to eliminate distortion and provide a stable platform to house the clutch unit
( 6 )
$939.00
PRW pedestal-shaft rocker arms are made from 6061-T6 or Series 7000 2024 aircraft quality aluminum alloy extrusions. Each rocker body is relieved for extra valve spring clearance and anodized for added strength. Each rocker body is shot-peened and machined for extra valve spring clearance; then anodized for better cooling and added strength. Each rocker arm incorporates needle roller bearings from the finest manufacturers in the world. CNC-machined billet steel pedestals, center-ground steel alloy rocker shafts, and PRW Custom-4135 alloy steel fasteners, valve lash adjusters and 12-pt. lash nuts comprise the foundation of these rocker arm systems. The kits come with the components and necessary hardware required for a professional installation. Order the rocker arms designed for your application needs. Features and characteristics: * Rated 750 lbs. open spring pressure * Internal oiling system for long-lasting performance * SAE 42100 full complement precision needle and cage roller bearings * Available in 1.5 or 1.6 ratio, and 1.5/1.6 split-ratio assemblies
Not Yet Reviewed
$775.05
The Right Stuff Street Series disc brake conversion kits feature all the quality components needed to convert your front or rear brakes to disc. Offered for both manual and power braking systems, Street Series kits are application-specific, maintain your vehicle's stock height or provide a 2 in. front drop, and are available with numerous component and finish upgrade options to make your braking system your own. So what's stopping you? Hundreds of kits are available; choose The Right Stuff Street Series conversion recommended for your vehicle.
( 19 )
$811.80
—
$1,003.95
Whether you're setting up ring and pinion gears or doing general differential repair, do it with Yukon Gear & Axle carrier bearing pullers. These tools work with an impact gun to quickly and safely remove your carrier bearings while minimizing the risk of damage. These pullers come with a handy bench top-stand and work on most standard size carrier bearings and pinion bearings on differentials. For all of your drivetrain needs, use Yukon Gear & Axle!
( 5 )
$769.99
Upgrade your braking system with SSBC-USA's drum to disc brake conversion kits. You'll enjoy the rhythm of modern stopping power afforded you with their cast iron or aluminum calipers, brake pads, rotors, and all necessary brackets, hardware, and bolts. Order the SSBC-USA drum to disc brake conversion kits designed for fitment on your vehicle—front, rear, or both.
( 33 )
$787.00
For that finished, show-car look, Harwood offers this Show series line of bolt-on hoods, featuring a finished underside that looks much smoother than the exposed bracing of many other hoods. They are hand-laid in precision molds by experienced craftsmen to ensure the best possible fit and finish. These bolt-on hoods are also designed to bolt on to the stock hinges and latch mechanism and feature a gelcoat finish on the top and bottom.
( 76 )
$824.99
COMP Cams Xtreme Energy 4x4 cam and lifter kits are built to take advantage of the latest cam technology to provide maximum performance and low-end torque for your vehicle. Whether your use is off-roading or towing, there is an Xtreme 4x4 for you. By using an aggressive lobe profile, these cams provide better throttle response and more top-end horsepower than equivalent cams from other manufacturers, while delivering increased engine vacuum.
( 69 )
$816.95
With Wilwood Forged Dynalite Big Brake front brake kits, you'll be ready for show, street, or strip! Track-ready performance and high-tech style come with oversized rotors, forged billet Dynalite calipers, and high performance Wilwood SmartPads. These front brake kits are fully compatible with OE master cylinder output. Options for the caliper finish and rotor design make it simple to match the brake response and style preferences on all types of daily drivers, race vehicles, and ultra-styled show machines! The choice is yours for big stopping power--choose Wilwood Forged Dynalite Big Brake front brake kits.
( 130 )
$943.24
—
$1,100.60
UMI Performance Road Race K-Members are designed for serious racers who expose their vehicles to more stress than any street cars will ever experience. Using an additional 1.000 in. of tubing, UMI Performance Road Race K-Members tie together crucial areas. They weigh in at 3 lbs., more than UMI's standard version, but still maintain a much-needed weight savings.
( 3 )
$819.99
Manufacturer Rebate
Powertrax Grip Pro traction systems are the latest design in differential technology. They combine the smooth operation of a limited-slip differential, with the strength of a fully machined, forged steel case. Using 3x2 spiral gear engineering, the Powertrax Grip Pro delivers progressive and variable traction. Based on throttle input, you are in control of how much traction is applied. These differential systems are great for use where finesse is just as important as brutal traction. On the road or track, in the rain or snow, Grip Pro is a winner! The systems come fully assembled and there are no friction plates—so you can use any gear oil you like, including full synthetic and racing lube.
( 21 )
$858.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
