Availability
Showing In Stock Items. Show All 41 Items.
Rhodes Race Cars SCCA, NASA, and Drift roll cages are made specifically for hobbyists and for serious racers looking to compete in SCCA, NASA, or Formula D events. All road race cages feature a main hoop diagonal and dual door bars (can be made into dual X-bars). They are weld-in cages and feature notched tube ends (where applicable) for ease of installation. Roll cages are offered in these materials: * 1 5/8 in. O.D. 0.134 in. wall ERW mild steel tubing * 1 5/8 in. O.D. 0.120 in. wall DOM tubing * 1 5/8 in. O.D. 0.083 in. wall 4130 chromoly tubing DOM tubing is very strongly recommended; ERW cages will most likely NOT pass tech inspection for most classes. Chromoly is not recommended by most sanctioning bodies. Due to different requirements for specific classes and weights, you should check with your track or sanctioning body for specific guidelines prior to purchase. It is the installer's responsibility to assure that a cage meets race organization rules as to tubing material and sizes, fit, placement of components, and welding. Note: Because of differing driver sizes and main hoop locations, roof hoop and windshield down bars are not notched. Some minor trimming may be required during installation.
( 2 )
$574.95
The best just got better! Injector Dynamics ID1750x fuel injectors are a built-to-spec motorsport injector, offering optimization of critical operating parameters important to you, the motorsport tuner. Built on the evolution of the ID1700 and X Series, these fuel injectors are a drastic improvement over previous series from Injector Dynamics. Compared to the 1700, the 1750x offers: higher dynamic flow rate with no increase in minimum fuel mass, better cylinder to cylinder balance at low pulse widths, and improved pressure sensitivity—all while retaining the same "compatible with everything but dirt" corrosion resistance that made the ID1700 famous. Plus, a unique magnetic circuit, resulting from a lengthy development program, makes the ID1750x immune to voltage and pressure sensitivity problems that plague other high impedance high flow injectors. Order the set of fuel injectors recommended for your vehicle. Key features and benefits include: * Compact body design allows fitment in a variety of applications * Higher dynamic flow rate with no decrease in minimum fuel mass * Better cylinder to cylinder balance at low pulse widths * Improved pressure sensitivity * Corrosion resistance makes these fuel injectors compatible with Methanol/Ethanol/MTBE/Nitromethane and all known Hydrocarbon fuels * Unique magnetic circuit makes the ID1750x immune to voltage and pressure sensitivity problems that plague other high impedance high flow injectors * Narrow spray pattern—minimal wall wetting promotes quick response and smooth running * Does not require extended linearity at low flow rates
Not Yet Reviewed
$609.00
Space can be at a premium in some engine compartments. Nitrous Express Piranha nozzle nitrous systems are designed to deal with that problem and still give you big-time power increases. They're built around NX's compact, yet highly effective Piranha nozzles and can deliver from 100 to 250 extra horsepower for 4-cylinder engines (including the air-cooled Volkswagen). For sixes, the power jumps range from 150 to 375 horses, and V8s can get boosts of 200 to 550, or even 600 hp. The kits come with nozzles, delivery lines and fittings, jets, solenoids, wiring, switches, and mounting hardware.
( 1 )
$634.70
—
$781.77
Rhodes Race Cars competition roll cages meet or exceed NHRA and IHRA requirements (when properly installed). Available in 4, 6, 8, and 10-point models, all RRC bars are precision bent for each particular body style and feature notched tube ends (where applicable) for ease of installation. Increase chassis stiffness, and race safe with Rhodes Race Cars competition roll cages. RRC roll bars and cages are available in the following materials: * 1-3/4 in. x .134 in. wall mild steel tubing * 1-3/4 in. x .120 in. wall DOM tubing * 1-3/4 in. x .083 in. wall 4130 chromoly tubing The 4-point kits include main hoop, rear braces, seat crossmember, and four steel mounting plates. The 6-point kits include main hoop, rear braces, side bars, seat crossmember, and six steel mounting plates. The 8-point kits include main hoop, rear braces, side bars, frame supports, seat crossmember and 6 steel mounting plates. The 10-point kits include everything in the 8-point kits, plus a roof hoop, windshield runners, and dash crossmember. Note: Because of differing driver positions and main hoop locations, roof hoop and windshield down bars are not notched!
( 140 )
$534.95
—
$749.95
South Bend Clutch Stage 3 Daily Driver clutch kits are recommended for single mass flywheel (SMF), when original design is dual mass flywheel (DMF). These clutch packages are designed for high-horsepower vehicles desiring a start performance similar to OE. The pressure plate is race engineered (SS) and SFI-approved with significant load increase over stage 1 and 2 pressure plates (+600-800 lbs.). Expect a pedal effort increase of 20 to 25 percent. Discs are assembled with heat-treated wear-resistant hubs, as well as drive plates and springs for high-load transfer and dependable operation. The sprung centers on the disc, in conjunction with the marcel fin between the linings, create a dual dampening effect that simulates OE start performance. A performance organic friction material with a high metal content increases torque and rpm capability—and maintains low operating temperatures, which reduce wear and glazing. South Bend Clutch Stage 3 Daily Driver clutch kits are the perfect match for your high performance street machine and occasional track use. Order the kit recommended for your application.
Not Yet Reviewed
$651.06
Fidanza billet aluminum flywheels feature excellent heat dissipation and weight reduction. The replaceable friction surface is machined from 1045 steel and attached with military-grade aerospace fasteners. These flywheels are manufactured from the highest quality 6061-T6 billet aluminum and feature a 1050 heat-treated steel ring gear that's pressed on and secured with Grade 8 button screws. They also use a stepped dowel system so that when the parts are installed they're locked into place. No chromoly can compete with the awesome serviceability, strength, and superior design of Fidanza billet aluminum flywheels—available in nearly 200 models and options for applications from the 1940s and up.
( 34 )
$598.49
Clearance
USA Standard manual transmission bearing kits include top-quality components to rebuild the bearings in your transmission. They're great for replacing worn out or broken items--even just giving your transmission a quick update, while you're down in the off-season.
( 9 )
$593.99
Rhodes Race Cars Lemons and Chumps roll cages are specifically designed for those of you looking to compete in 24 Hour of Lemons and ChumpCar Series races. RRC has taken out all of the guess work and come up with these easy-to-install kits. All the tubing is pre-bent and notched for ease of installation. Rhodes Race Cars Lemons and Chumps roll cages are available in ERW mild steel, DOM, and chromoly. ERW mild steel is accepted by both sanctioning bodies, but DOM is very strongly recommended. Chromoly is generally NOT recommended for this type of racing. Check your sanctioning body's rules before you order! Note: Some minor trimming may be required during installation. All RRC cages are weld-in cages.
( 4 )
$574.95
South Bend Clutch Stage 2 Endurance clutch kits are recommended for daily and street use with an emphasis on rally and endurance racing. An SFI-approved single-mass flywheel is recommended for racing climate applications in order to achieve optimal performance (flywheel not included). Order the clutch kit recommended for your vehicle application. Features include: * Designed for the racing environment * Pressure plate is precision-balanced for vibration-free operation at high-rpm * Pressure plate fulcrum is altered for a positive disengagement and a quick shift * Disc is engineered with a dual-damped design to provide accurate control when accelerating through corners * Hybrid friction material with a full face Feramic (sintered iron) lining on the flywheel side and a high metal content organic lining on the pressure plate side * Engagement is positive, yet buffered due to the high graphite content unique to Feramic facings
( 3 )
$501.32
South Bend Clutch Stage 2 Drag Race clutch kits are designed with racers in mind. They include a single mass SFI-approved flywheel with each kit—typically required for drag racing when the original design is dual mass. The heavy-duty pressure plate is modified for a puck-style disc with no cushion between the linings to keep the clutch pedal travel short and quick. These South Bend Clutch Stage 2 Drag Race clutch kits are recommended for drag racing, drifting, and limited street use. Order the kit that's recommended for your specific vehicle and engine size. Features, items, and specs include: * Graphite-impregnated ceramic friction material for exceptional durability, heat transfer, torque capacity, and reduced chatter * Puck-style disc reduces rotational mass and total drive surface area, while increasing psi on the surface of the friction material * Disc design minimizes inertia, accelerating the transfer of torque from the engine to the wheels * Meticulous processing and advanced packaging materials
Not Yet Reviewed
$579.45
South Bend Clutch Stage 3 drag race clutch kits are powerfully built with heavily modified vehicles in mind—particularly those built for 1/4 and 1/8 mile tracks. They include a single mass SFI-approved flywheel with each kit, which is typically required for drag racing when the original design is dual mass. The pressure plate is race cover engineered to keep the clutch pedal travel short and quick. South Bend Clutch Stage 3 drag race clutch kits are recommended for drag racing, pulling, and drifting. Order the clutch kit recommended for your specific vehicle and engine size. Features, items, and specs include: * Puck-style disc reduces rotational mass and is assembled with all high-carbon components for maximum strength * Graphite-impregnated ceramic friction material perfectly suited for drag racing (maximum friction co-efficient, rapid heat dissipation, and abrupt engagement characteristics) * Meticulous processing and advanced packaging materials
Not Yet Reviewed
$781.27
South Bend Clutch Stage 3 Endurance clutch kits are recommended for single mass flywheel (SMF) when original design is DMF (dual mass) to achieve optimal performance. These kits use the same race-engineered SFI-approved pressure plates as Stage 3 Daily Driver packages. The disc is designed for the special needs of a vehicle with circuit racing in mind. Kevlar® friction material is used for its unique friction compounds applied with high-energy levels. This translates to a perfect transition from one gear to the next. Discs are assembled with only performance components and equipped with torsion springs functioning as a damper between engine and gearbox. These Stage 3 Endurance clutch kits are recommended for applications such as rally, endurance race, club sport, autocross, performance street and daily driving. Order the kit you need.
( 2 )
$735.70
South Bend Clutch Stage 4 X-Series clutch kits are build-to-order clutch packages for vehicles modified to exceed Stage 3 hp parameters. The kits include a steel, single mass, SFI-approved flywheel for safety. The race-engineered pressure plate is modified for maximum plate load, and helps to deliver more transmittable torque, stability, extended life, and superior thermal resistance. The South Bend Clutch Stage 4 X-Series clutch kits provide noticeably better dynamics through higher clamp loads, when driving your vehicle to its limits. Order the Stage 4 X-Series clutch kit recommended for your specific vehicle and engine size. Features, items, and specs include: * Puck-style disc offered in sprung and un-sprung options * Graphite-impregnated ceramic or sintered iron friction material options * Torque ratings calculated at time of ordering * Engagement characteristics can be abrupt * Meticulous processing and advanced packaging materials
Not Yet Reviewed
$813.82
XClutch Stage 2 clutch kits offer performance upgrades for both street and track applications. Designed in-house, XClutch utilizes the latest ceramic technology in their Stage 2 kits offering either a cushioned or a sprung-style friction disc. They are mated with a high performance pressure plate and are recommended for vehicles requiring a higher level of torque holding and heat capacity. Features: * 1C cushioned ceramic—the discs offer a dampening layer between the two friction surfaces which is clamped together as the force of the pressure plate is exerted on the disc. This dampening along with a sprung hub offers drivability despite the ceramic friction surface. These kits are ideal for track cars that require some drivability or very high-horsepower street vehicles that require the added heat capacity of the ceramic friction material. * 1B sprung ceramic—these friction discs offer a sprung center to allow for drivability and are specifically designed for track use with minor street use. The kits offer great heat capacity due to the ceramic friction material and are available for a wide range of performance vehicles.
Not Yet Reviewed
$579.59
Vision UTV 346 Storm Forged Series beadlock wheels feature a dozen split-Y spokes, a polished finish, and single beadlock with gold accents. The two-piece forged aluminum rims are available in a variety of widths, bolt patterns, and other fitment options.
Not Yet Reviewed
$664.99
Maintaining proper wheel alignment is not only fundamental in extending the tread life of your tires, it also helps you to safely control the vehicle. Moog cam bolt kits are designed to assist with camber and toe-related issues, returning the vertical angles to OE specifications or allowing you to make adjustments for more precise handling than that provided by the factory settings. Moog adjustment hardware kits afford you improved alignment, longer part life, and ease of installation.
( 15 )
$503.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
