Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
1987 CHEVROLET BLAZER Parts and Accessories
Showing In Stock Items. Show All 72 Items.
Vintage Air Gen-V SureFit Systems Evaporator Kits
Get cool with Vintage Air! Their Gen 5 SureFit evaporator kits assist with providing powerful and intelligent climate control for your vehicle. These kits utilize an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments. Additionally, they include variable blower speed and dash/floor/defrost blend. Vintage Air Gen-V SureFit evaporator kits include the evaporator unit and mounting brackets, louvers (where required), duct hose wiring harness, hardware, and installation instructions, along with either a bolt-in replacement control panel or Vintage Air's patented electronic cable converters to use with your factory system controls. Choose the kit designed for your vehicle. Features and benefits: * Engineered to cool your vehicle faster than ever * Improved diagnostics and advanced systematic fail safes * Multiple mounting options for an easier installation * Rubber well-nut mounting points for improved NVH isolation * Separate high-capacity A/C and heater coils with blend air door for rapid vent temperature adjustment * OEM block-type expansion valve * Injection molded case for optimal precision, strength and quality * Injection molded blend air doors with integral rubber seals * Removable access covers for coil service * Interchangeable defrost and floor heat plenums for increased mounting flexibility * Powdercoated steel mounting brackets * Quiet high-performance blower
( 17 )
$1,418.99
Edelbrock Performer RPM Cylinder Heads
Edelbrock Performer RPM aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. These heads offer improved power throughout the RPM range for greater throttle response and top-end horsepower. Countless options are available; order the model recommended for your vehicle and engine application.
( 169 )
$1,079.50
—
$1,252.50
AutoMeter InVision Digital Gauges
Looking for a sleek, modern alternative to traditional data instruments? AutoMeter InVision digital gauges are the answer. Winner of Best New Interior Product at SEMA, these panels are available as a direct-fit digital dash system or as a universal all-in-one dash for most vehicles. Features include: * 12.3 in. LCD display * Four user selectable displays * High beam and turn signal indicators as well as user selectable warning lights * Adjustable RPM range (8,000 or 10,000) * Odometer with two trip meters * Remote mount joystick for easy programming * 12 or 24 hour clock format * Selectable imperial or metric measurements * Speedometer compatible with OEM, square wave or sine wave sending units * Tachometer compatible with single-cylinder to 12-cylinder engines * Adjustable brightness
( 21 )
$1,009.99
BDS Suspension Lift Kits with NX2 Nitro Series Shocks
BDS Suspension steps up the performance and capability of your truck or Jeep with their NX2 Nitro shock lift kits. Designed to improve stance, each kit includes the necessary components to set your vehicle up right with clearance for larger tires at an affordable price. Featuring a set of NX2 Nitro Series shocks, BDS lift kits will also include either ProRide coil springs for improved ride quality and more articulation, Glideride leaf springs to provide full lift height and increased capacity, or steel blocks and add-a-leaf for a level stance from front to rear. They may also include other upgrades that add strength and improved handling. Select the BDS NX2 Nitro shock lift kit engineered for your vehicle. NX2 Nitro Series shocks: * Nitrogen-charged * Twin-tube design * 10-stage velocity-sensitive valving * Dual-welded ends for increased strength * 1 3/8 in. high-flow piston * Self-lubricating seals * Silver powdercoat finish
( 1 )
$1,297.45
Classic Instruments 1973-87 Chevy/GMC Truck Packages
Whether you want to freshen up your stock look, or provide a more custom-look to your dash panel, Classic Instruments 1973-87 Chevy/GMC truck packages are just the ticket! These square body direct-fit cluster gauges are designed to drop directly in place of the stock cluster in 1973-87 Chevy/GMC trucks, Suburbans, and Blazers. They feature many stock-inspired elements in an all-electric, easy-to-install package. They're available in different Classic Instruments gauge styles, such as G-Stock, OE-style, Hot Rod, Velocity (black or white), Silver Gray, and White Hot. Additional features include: * LED illumination (must use existing gear indicator) * Turn signals in the stock location * Seamless fit into existing dash/bezel * Single-connection wire harness for ease of installation * Replacement lens * All necessary sending units included * Fuel sending unit selector switch (works with most existing fuel sending units)
( 5 )
$1,126.95
Edelbrock Performer Cylinder Heads
All Edelbrock aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. They offer improved power throughout the rpm range for greater throttle response and top-end horsepower. The intake and exhaust runners are CNC-machine profiled for superior flow and performance.
( 41 )
$1,079.50
Griffin Exact Fit Radiator Combos
Griffin Exact Fit radiator combos are the perfect pairing to take the "scary" out of electric fans! Exact Fit combos deliver Griffin's high-quality aluminum OEM fit and style radiators. They're constructed with MaxCool or ExtremeCool tubing, hand-formed aluminum shrouds, and performance electric fans. These units are easy to install, provide the best factory appearance, and fit your ride with out-of-the-box affordable performance cooling. Want to switch to electric fans? American-made Griffin Exact Fit radiator combos provide you with the perfect solution without any guesswork. Order the package designed for your specific vehicle.
( 92 )
$1,304.00
—
$1,370.00
PSC SGX Series Power Steering Gear Boxes
Performance Steering Components offers their SGX Series power steering gear boxes for GM trucks and SUVs, 2WD and 4WD applications. Improved design features—such as the largest piston assembly available—deliver increased torque output; while a 45mm sector shaft bearing prevents premature failure and provides smooth, reliable performance in all environments. Billet aluminum top and end covers resist corrosion and enhance the appearance of any show-ready vehicle. All SGX Series power steering gear boxes are equipped with 6 AN ports for adding a PSC steering-assist cylinder at any time. From the daily driver to the rock-crawling rig, PSC has the high performance power steering components you need to make transport a safe, reliable, and enjoyable experience.
Not Yet Reviewed
$1,150.00
Doug's Headers
Doug's Headers has long been recognized of as one of the premiere exhaust header manufacturers in the performance industry. Since1958, they have been producing high-quality, hand-built, mandrel-bent exhaust headers. Each and every header is tuned with the proper tube size and length to efficiently remove all of the exhaust from each cylinder, reducing pumping losses, and resulting in dramatic increases in horsepower and torque. Doug's headers are carefully developed on the vehicles that they are intended to fit and are re-checked numerous times during the design and manufacturing process. Their designs include mid-length headers, Tri-Y headers, and long tube headers, plus manifold replacement headers. Their headers come with all the necessary mounting hardware, collector reducers or connector pipes, premium extra-thick gaskets, and detailed installation instruction sheets. The gaskets are rated up to 1100 degrees F, pressures to 3700 psig (255 bar), and are designed for an exact port match with their headers. Doug's Headers offer a choice of finishes: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier that significantly lowers under hood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw steel is available for individual customizing Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 715 )
$1,004.20
—
$1,035.50
Skyjacker Suspension Lift Kits
Skyjacker suspension lift kits provide a smooth, comfortable ride, while responding to on or off-road conditions. They'll help you get the right height, clearance, and attitude for your truck or Jeep—while maintaining a "factory" ride quality and improving handling. Standard Flex, Value Flex, Rock Ready, Single Flex, and Double Flex versions are available, depending on your application. The lift kits come with all of the necessary mounting hardware and detailed instructions, and they're available for 2WD or 4WD vehicles.
( 70 )
$1,183.49
—
$1,205.38
Ridetech Strongarms Tubular Control Arms
Ridetech Strongarm tubular control arms are designed to stiffen up your vehicle's chassis, while providing a smoother ride. They feature a tubular design that offers maximum strength—and are available for a variety of front and rear positions. The control arms include bushings and factory-installed ball joints (front), making installation easier. Get optimum suspension geometry with a set of Ridetech Strongarm tubular control arms; order the kit recommended for your vehicle.
( 17 )
$1,065.00
TMI Sport Series Door Panels
TMI Sport Series door panels are made from premium materials—such as molded fiberglass and vinyl—and are available in factory styles and color options to suit your taste and budget. TMI door panels have a superior-quality fit and finish, making them the perfect replacements for anyone restoring their classic ride to its original features. Order the panels designed for your year/make/model application.
( 9 )
$1,127.77
Tuff Country EZ-Ride Suspension Lift Kits
Tuff Country EZ-Ride suspension lift kits increase fender clearance and allow for larger tires, while their EZ-Ride technology maintains a great ride. All Tuff Country EZ-Ride lift kits are of the finest quality and are engineered for simple installation at an affordable price. Most kits bolt-on, require no cutting or drilling, and are available for a wide range of vehicles in a choice of lift heights. New shocks are not required on most installations. Features of Tuff Country EZ-Ride suspension lift kits, depending on the application, may include: * Spacers mounted above the OEM coil springs/struts * Rear add-a-leafs added to the existing leaf springs * Rear cast iron lift blocks mounted below the OE leaf springs * Re-indexed factory torsion bars--without "cranking up" * Control arms that retain proper suspension geometry * Control arms with PTFE-lined FK Uni-ball joints * Dropped pitman arm and/or track bar relocating bracket(s) for proper alignment * Extended radius arms to improve articulation * Replacement radius arms that eliminate the need to drop radius arms--with no loss of ground clearance * Axle pivot brackets with camber adjustment * Transfer case drop kit * Polyurethane spring bushings * PTFE pads in leaf springs to eliminate squeaking * Tapered, snub-rolled, and pre-set leaf springs * Application-specific hardware and U-bolts
( 72 )
$1,115.99
—
$1,480.99
Trans-Dapt Performance Swap-In-A-Box Complete Engine Swap Kits
Trans-Dapt Performance Swap-In-A-Box complete engine swap kits feature everything you need to transplant that new engine into your ride. They include a set of application-specific headers (painted or ceramic coated), motor and transmission mounts, and some kits contain oil filtration components. By matching up these parts by vehicle, Trans-Dapt ensures a swap with minimal modifications needed for installation. Give your ride a heart transplant using one of these turnkey Swap-In-A-Box complete engine swap kits!
( 62 )
$1,009.99
—
$1,354.99
On Sale
Pypes Street Pro Exhaust Systems
Pypes Street Pro exhaust systems are designed to boost your car's performance to the next level—you'll get more power, better mileage, and a rich, throaty tone that can't be ignored. Built to outflow and outlast factory exhausts, these systems feature mandrel-bent, 16-gauge, stainless steel pipe and precision-matched stainless steel mufflers. Don't let the looks of these mufflers fool you. Although at idle, you may cause passengers to reach for their seat belts—upon acceleration, a smooth, authoritative tone turns apprehension into a reassuring confidence. These great street/strip mufflers will maintain their rich sound qualities for life because there is no filler to burn off. They're recommended for stock to medium-modified vehicles where an aggressive sound is appreciated but not advertised. Pypes Street Pro exhaust systems include stainless steel hangers, clamps, and instructions; their slip-fit connections facilitate a fast and trouble-free installation (some cutting may be required). Order the model designed for your vehicle.
( 200 )
$1,292.79
$1,163.51
Tuff Country Heavy-Duty Lift Kits
Get a big boost in your ride profile and handling with one of these Tuff Country heavy-duty suspension lift kits. They're the best way to give your rig maximum height, maximum clearance, and maximum attitude. Additionally, each Tuff Country heavy-duty lift kit is specially created for the greatest outcomes. Tuff Country uses premium "EZ Ride" leaf or coil springs. Under heavy use, this provides the best handling and control without sacrificing ride quality. For the most comfortable ride, each lift-arched leaf spring is tapered, snub rolled, and set, and are also shot-peened, set, and powdercoated for longer life and height maintenance. All brackets are laser-cut using computer guidance to provide the best quality and simplest installation. Each Tuff Country kit is designed to give you what you need to accomplish your lift project with success. Choose the Tuff Country heavy-duty lift kit designed for your application needs. Product highlights: * Featuring EZ-Ride Technology for the best ride * Replace worn-out front and rear springs with EZ-Ride leaf springs * Kits are also available for purchase with rear springs or rear cast iron blocks * PTFE pads used in leaf springs to eliminate squeaking * Leaf springs are tapered, snub rolled and pre-set * Shocks are sold separately unless otherwise noted * Limited lifetime manufacturer warranty on leaf spring sew
Not Yet Reviewed
$1,172.99
—
$1,475.99
The Right Stuff Hydraulic Brake Assist Power Brake Booster Kits
The Right Stuff offers hydraulic brake assist power brake booster kits in a variety of configurations for many different vehicles—including GM and GMC applications from the 1960s, '70s, and '80s. Hydraulic brake assist uses pressure from the power steering pump to provide braking boost, and includes a high-pressure accumulator that has enough capacity to provide several power-assisted stops in the event that the power steering pump belt breaks or a hose ruptures. Order the assembly recommended for fitment on your car or truck.
( 4 )
$1,097.10
The Right Stuff Master Cylinder and Booster Assemblies
Are you pushing the brake to the floor? That's a clear warning sign that it's time for The Right Stuff master cylinder and booster assemblies. Depending on disc-disc or disc-drum applications, some Right Stuff replacement assemblies include a proportioning valve with a bracket and stainless steel lines. Slowing your vehicle to a safe, efficient stop is much easier with a new master cylinder and booster assembly from The Right Stuff.
( 363 )
$1,097.10
Motive Gear Ring and Pinion Gear and Installation Kit Combos
Want to get back the power and gas mileage that you lost from installing those big tires on your Jeep? Motive Gear makes it easy to re-gear your 4x4 with their ring and pinion gear and installation kit combos. These complete kit combos include front and rear ring and pinion sets, plus front and rear bearing kits, giving you everything you need to re-gear the front and rear differentials in one package. The kits come in a wide range of ratios for most Dana applications. Their quality is the result of years of development, outstanding design, and state-of-the-art manufacturing methods to ensure a perfect fit for an easy install.
( 8 )
$1,116.99
—
$1,246.99
LEED Brakes Rear Disc Brake Conversion Kits
LEED rear disc brake conversion kits add the safety, reliability, and performance of disc brakes to your vehicle. These kits are a direct bolt-on with no cutting, drilling, or welding required. All components are new, high-quality, and precision-machined. The heavy-duty parking brake caliper will allow you to use your stock parking brake cables to actuate the parking brake.
( 19 )
$1,118.99
—
$1,119.99
On Sale
Brothers Trucks Complete Bed Floors
Brothers Trucks offers complete bed floors for a variety of applications, including many Chevy and GMC trucks from the 1960s, '70s, '80s, and '90s. These top-of-the-line one-piece steel truck bed floors will help you finish restoration of your classic truck. Rusty or dented beds can be easily replaced, as these new floors are designed to fit seamlessly—eliminating the need for unsightly weld lines and ensuring a smooth, factory-like finish. The bed floors come ready to install, with all cross sills included. Additional details: * Stamped from heavy-gauge steel for strength * Black Electro Deposition Primer (EDP) coated for easy paint preparation and corrosion protection * Designed to exact OEM specifications * High quality for excellent fitment and appearance
Not Yet Reviewed
$1,499.95
On Sale
Hays Twister Full Race Torque Converters
Hays Twister Full Race Torque Converters feature a custom-designed anti-balloon plate to stop any converter ballooning and swelling in racing situations. These torque converters are designed for use with a trans-brake and great for power adders such as nitrous, superchargers, and turbos. They're available with various RPM stall speed offerings to accommodate any mixture of modifications—including higher compression ratios, aftermarket camshafts, aftermarket cylinder heads, lower gear ratios, and vehicle weight loss. Additional product features: * All Full Race Series converters are built, tested, and proven to support up to 1,000 hp * Designed to handle the extreme shock and abuse of trans-brakes, nitrous oxide, superchargers, and turbochargers * State-of-the-art spray welding process is used in select areas. Spray welding provides clean, strong, and consistent fusion while also increasing strength through hardening from higher process temperature * Each converter is hand-built and inspected in every step of assembly to ensure top-of-the-line quality * All Hays torque converters are internally welded, compared to brazing. Testing has shown welding provides longer converter life while also enhancing consistency * Heavy-duty Torrington bearings are used for greater strength and durability * Stators are chosen with high-flow vents and channels to promote cooling in heat-producing higher horsepower applications * Increased horsepower and acceleration due to a weight-saving, one-application design. Almost all Hays converters are built for one application to reduce weight, compared to a multi-bolt pattern converter * Full Race Series torque converters are offered in several different stall speeds for popular automatic transmissions.
( 1 )
$1,126.95
—
$1,349.95
Be Cool Factory Fit Modules
Be Cool factory fit modules provide drop-in convenience, plus the capability of keeping engines up to 1,000 hp (depending on your application) running at the proper temperature! These modules feature Be Cool's factory fit radiator that has two rows of 1 in. tubes to reduce coolant temperatures, a billet filler neck, a drain petcock, and .080 in. wall hand-fabricated aluminum tanks. You can choose either a natural finish or kick it up a notch with the polished finish and dress your engine compartment with shiny performance. Be Cool offers hundreds of models and options for fitment on a wide range of vehicles. Most module kits include a new aluminum radiator, electric fan(s) with mounting brackets, a Be Cool radiator cap, an overflow catch can, and a fan wiring kit.
( 92 )
$1,199.99
—
$1,499.99
On Sale
Holley Sniper EFI 2GC Large Bore Fuel Injection Systems
Holley Sniper EFI 2GC large bore fuel injection systems let you convert your classic 2GC large bolt pattern carburetor to EFI. These units offer superior throttle response and WOT power over the carb—and you will likely experience increased fuel economy. Put an end to cold start issues, hesitations, vapor lock, and flooding with the accuracy of EFI. You can also use the Sniper EFI 2GC to control the ignition timing, taking electronic fuel injection to the next level. These Holley upgrade systems feature two 100 lb./hr. fuel injectors capable of supporting 350 hp on naturally aspirated engines. The Sniper EFI systems are also available in a Master Kit option, which includes 20 ft. of fuel hose, two filters, one high-pressure EFI fuel pump, and all required fittings for a complete EFI fuel system conversion. Standard and Master Kit systems are available in a choice of throttle body finishes. Standard Sniper EFI system features: * Bolt-on 2GC large bore carburetor replacement * Universal throttle lever with TH350, 700R4 and 200-4R kickdown provisions * Throttle body-mounted ECU; no extra boxes to mount * Only four wiring connections required: Battery +, battery -, switched ignition, and rpm * Internal fuel pressure regulator eliminated the hassle of plumbing an external fuel pressure regulator (preset to 58.5 psi) * Integrated ignition timing control (with MSD Pro Billet, Holley Dual Sync, or Holley Hyperspark distributors) * High-resolution full-color touch screen for initial setup, tuning, and gauge displays * Simple Calibration Wizard (answer a few questions about your engine and it creates the base map, then starts tuning on its own!); NO laptop required * Self-tuning ECU means you don't have to be a computer/tuning wiz to have EFI * The included Genuine Bosch LSU 4.9 wideband oxygen sensor provides real-time Fuel Map Learn * OEM-style TPS/IAC and fuel pressure regulator—for years of dependable service * Included clamp-on oxygen sensor kit for 2 in. exhaust ensures a leak-free oxygen sensor installation, with stainless steel T-bolt clamps and a stainless steel (weldable) oxygen sensor flange * Systems are an ideal conversion for 1974-78 Chevrolet, GMC, Oldsmobile, and Pontiac vehicles that came with a Rochester 2GC large bore carburetor.
Not Yet Reviewed
$1,649.95
$1,483.95
