1984 PONTIAC FIREBIRD Parts & Accessories

ATK High Performance GM 350 Vortec 290 HP Stage 3 Long Block Crate Engines

ATK High Performance GM 350 Vortec 290 hp Stage 3 long block crate engines are perfect replacements for your worn out SBC. They are designed with matched components for reliable performance with extra "go power", and they require an electric fuel pump. ATK Stage 3 or complete dressed engines are engineered for those wanting to drop the engine into their project and fire it up. They have outfitted the engines as completely as possible to save you time and headaches. Typically ATK GM 350 Vortec 290 hp complete long blocks consist of: * OE block bored to 4.060 in. diameter with 2-bolt mains and a one-piece rear main seal * OE reground crankshaft with a 3.480 in. stroke * OE powder metal 5.7 in. length connecting rods * Hypereutectic 9.4:1 compression ratio pistons * Moly piston rings * Hydraulic roller camshaft (191/194 duration at 50, .414/.428 in. lift, 111 LSA) * Cast iron Vortec cylinder heads with 64cc combustion chambers, 165cc intake runners, and come with 1.94 in./1.5 in. valves. * Stamped steel 1.5 ratio rocker arms * Single roller timing set * 5 qt. oil pan ( will not fit Chevelle with steering behind crossmember, some Corvettes, and 1962-67 Chevy II) * Melling standard volume oil pump * Valve covers * Flexplate * ATK HP dual plane intake manifold * Distributor HEI * Cast iron long water pump * Front Powerbond balancer (internally balanced) * Pioneer externally balanced 168 tooth flexplate * Quick Fuel Brawler 670cfm carburetor * Autolite spark plugs (605) with 8mm wires

3.78 out of 5 stars ( 9 )

$3,625.99

ATK High Performance GM 350 Vortec 350 HP Stage 2 Long Block Crate Engines

Give your car or truck a little more punch with one of these ATK High Performance GM 350 Vortec 350 hp Stage 2 long block crate engines. These engines are built from the ground up to replace your old, tired mill with a more modern, efficient engine. ATK hand-builds and balances each one these engines to ensure they are great-running, reliable engines that will get you back on the road. Engine specifications: * HP: 350 * TQ: 400 * Block: OE roller block 4-bolt main 1-pc seal 1996-2000 * Bore/Stroke: 4.040 in. x 3.480 in. * Displacement: 350CI * Crankshaft: OE reground external balance rear of crank/internal balance front of the crank * Rods: OE powder metal 5.7 in. * Pistons: Hypereutectic 9.5:1 compression * Rings: Moly * Camshaft: Hyd. Roller * Cam Specs: 220/224 @50 .495in/.502ex 110LSA * Timing Chain: Double roller * Cylinder Heads: Vortec cast iron 67cc 1.94/1.50 *Rocker Arms: Stamped steel 1.5 ratio * Oil Pan: Rear sump 5qt (not for Chevelles with steering behind crossmember, some Corvettes and 62-67 Chevy II's) * Oil Pump: Melling STD volume * Balancer: Internally balanced – PowerBond #PB1046-N * Flexplate: Externally balanced – Pioneer #FRA-159 * Intake Manifold: ATK HP dual plane * Distributor: HEI (Iron Gear) * Water Pump: OE long pump Recommended components: * Carburetor: Quick Fuel 680CFM vacuum secondary's electric choke #HR-680 * Fuel Pump: Holley mechanical 110GPH #12-327-11 * Spark Plugs: Autolite #605 * Spark Plug Wires: 8mm Engine Info: * Oil: Conventional/Non-Synthetic 10W30 * Oil Filter: Wix or K&N * Timing: 34-36 Degrees * Spark Plug Gap: .035 in. * Firing Order: 18436572 * Octane: 91+ * Stall Converter: Stock * Exhaust: 1 5/8 Headers

4.0 out of 5 stars ( 9 )

$3,688.99

ATK High Performance GM 350 330 HP Stage 1 Long Block Crate Engines

Give your ride new life with ATK High Performance GM 350 330 hp/380 lbs.-ft. Stage 1 long block crate engines. These engines are based on the tried-and-true small block Chevy and are built to perform right out of the box. ATK hand-assembles and balances each engine using top-quality parts to help them produce awesome power. Whether you are replacing an older, worn down engine or just looking for a little more performance, ATK has you covered. Stage 1 long block crate engines include: * Handpicked, remanufactured blocks * ATK cast iron cylinder heads * 76cc chambers * 165cc intake runners * 1.94 in./1.5 in. valves * Stamped steel 1.5 ratio rocker arms * OE crankshaft * OE 5.7 in. powder metal connecting rods * Hypereutectic flat-top pistons * Moly rings * Hydraulic flat tappet camshaft * 465 int./.488 exh. cam lift * 224 int./234 exh. cam duration at 0.50 * 9.1:1 compression * Valve covers * Timing cover and timing set * Oil pan, pump, and pickup tube

3.69 out of 5 stars ( 16 )

$3,099.99

Edelbrock E-Force Supercharger Kits

Edelbrock E-Force supercharger kits use a positive displacement supercharger that is capable of producing over 500 hp. These kits include the supercharger with Eaton internals, a manifold, drive pulleys, a belt, and all necessary items for installation. Edelbrock E-Force superchargers are designed to provide more horsepower per pound of boost than their competitors, from off-idle through the rest of the rpm range. Plus, their internal bypass valve practically eliminates parasitic loss, consuming less than 1/3 of one horsepower at 60 mph. NOTE: They are not compatible with HEI distributors.

4.11 out of 5 stars ( 9 )

$3,730.95

ATK High Performance GM 350 330 HP Stage 3 Long Block Crate Engines

Give new life to your ride with ATK High Performance GM 350 330 hp/380 lbs.-ft. Stage 3 long block crate engines. They are based on the tried-and-true small block Chevy and are built to perform right out of the box. ATK hand-assembles and balances each engine using top-quality parts to help them produce awesome power. Whether you are replacing an older, tired engine or just looking for a little more performance, ATK has you covered. Stage 3 long block crate engines include: * Handpicked, OE remanufactured blocks * ATK cast iron cylinder heads * 76cc combustion chambers * 165cc intake runners * 1.94 in./1.5 in. valves * ATK dual plane Intake manifold * OE crankshaft * OE 5.7 in. powder metal connecting rods * Hypereutectic flat-top pistons * Hydraulic flat tappet camshaft * .465 int./.488 exh. cam lift * 224 int./234 exh. cam duration at 0.50 * 9.1:1 compression * Distributor, spark plugs, and plug wires * Valve covers * Timing cover and double roller timing set * Oil pan, pump, and pickup tube * OE style long water pump * Balancer and 168 tooth flexplate

3.63 out of 5 stars ( 8 )

$4,754.99

ATK High Performance GM 350 Vortec 350 HP Stage 1 Long Block Crate Engines

Give your car or truck a little more punch with ATK High Performance GM 350 Vortec 350 hp Stage 1 long block crate engines. These engines are built from the ground up to replace your old, tired mill with a more modern, efficient engine. ATK hand-builds and balances each one these engines to ensure that they are great-running, reliable engines that will get you back on the road. ATK GM 350 Vortec 350 hp Stage 1 long block crate engines include: * Handpicked, remanufactured blocks * Cast iron Vortec cylinder heads * OE crankshaft and connecting rods * Hypereutectic pistons * Hydraulic roller camshaft * Valve covers * Timing cover and timing set * Oil pan, pump, and pickup tube

5.0 out of 5 stars ( 7 )

$3,334.99

On Sale

Holley Sniper EFI Stealth 4500 Fuel Injection Systems

Holley Sniper EFI Stealth 4500 fuel injection systems are what you need to convert your dragster or Pro-street vehicle to fuel injection. For engines producing 800+ hp, the Sniper Stealth 4500 systems feature eight 100 lbs./hr. injectors and a throttle body that flows a massive 1,440 cfm. These Holley systems come with a USB to CAN tuning cable and free downloadable Sniper EFI software to give you unlimited control of your engine. Holley Sniper Stealth 4500 systems will also look great under the hood in your choice of shiny, ceramic black, and classic gold finishes. Features and benefits include: * Supports up to 1,500 hp naturally aspirated or 1,250 hp forced induction with eight 100 lbs./hr. injectors * Compatible with draw-through or blow-through forced induction applications * 2.125 in. throttle plates, flow 1,440 cfm for large cubic inch engines * 2.5Bar MAP sensor * Integrated ignition timing control * Programmable launch control via 2-step and timing retard. Both can be triggered by a trans-brake input * Gen 3 Ultra Dominator-style 4-bolt air cleaner flange * -8AN fuel inlets * High-resolution full color touchscreen for initial setup, tuning, and gauge displays * Simple calibration wizard--answer a few questions about your engine and it creates the base map, then starts tuning on its own! No laptop required * Self-tuning ECU means you don't have to be a computer/tuning wiz to have EFI * The included genuine Bosch LSU 4.9 wideband oxygen sensor provides real time Fuel Map Learn * Built-in single-stage wet or dry progressive nitrous control * Three programmable 0-5 V sensor inputs for oil/fuel/dome or nitrous pressure or other critical information * Six programmable ground outputs, five programmable ground inputs. These can be used to trigger or control external devices, such as nitrous solenoids and boost control solenoids. Or to provide the ECU with an input to turn on function, such as an ignition timing * One +5 V reference output, +5 V power supply for 0 to 5 V sensors, one sensor ground supply for 0 to 5 V sensors * Throttle body mounted ECU--no extra boxes to mount * Only 4 wiring connections required--battery +, battery -, switched ignition, and rpm * Required external fuel pressure regulator, 12-848 is recommended * Customizable secondary fuel pump output (TPS, rpm, or boost enabled) * User-friendly boost control with handheld adjustability * Free software included--comprehensive data logging tool to help you maximize the performance of your engine * Real-time data logging to the included 3.5 in. touch screen allows you to save information to the SD card without needing a communication cable * Programmable target air fuel ratios per boost level * Advanced boost control available via free Sniper EFI tuning software, including boost vs. rpm and boost vs. time * OEM-style TPS/IAC, for years of dependable service * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor installation, with stainless steel T-bolt clamps and a stainless steel (weldable) oxygen sensor flange

4.25 out of 5 stars ( 4 )

$2,199.95

Ridetech Ridepro E5 Air Ride Suspension Control Airpod Single Compressor Systems

Ridetech Ridepro E5 Air Ride Suspension Control Airpod single compressor systems are pre-wired solutions that mount in your vehicle as a single unit and adjust vehicle height at the push of a button while maintaining balanced air springs. With sophisticated pressure and height algorithms, Ridepro E5 control systems tune air ride suspension for proper handling and world-class ride quality, so that each time your turn the ignition key, Ridepro E5 self-adjusts to ride height and compensates for changes in load. And adjusting vehicle height is as simple as choosing one of three presets. You can also control the system wirelessly by simply connecting a compatible smartphone via Bluetooth and using the Ridepro E5 app. Ridetech Ridepro E5 Airpod systems feature and include: * Full color TFT LCD. 3.5 in. display with multi-touch capacitive touchscreen * 4-button silicone keypad with backlit symbols for quick vehicle height changes * "Ride Height On Start" automatic lift and level feature * Display and setup via control panel, smartphone app or laptop * Weatherproof ECM and heavy-duty connectors * Automatic weight compensation (with optional height sensors) * Bluetooth connectivity to most smartphones for wireless control * Airpod aluminum 3-gallon tank * Ridepro E5 digital control * Thomas compressor * 1/4 in. valves

Not Yet Reviewed

$2,615.00

On Sale

Holley Sniper 2 EFI 650 HP Returnless Fuel Injection Systems with Power Distribution Module

Holley Sniper 2 EFI Returnless Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters before/after the pump, fittings/hardware, and a low profile returnless drop-in pump module(1.275-inches above the tank mounting surface) that is designed for universal installation into fuel tanks that range from 7 to 12 in. deep * Pre-set, internally regulated pump only requires a single feed line to the Sniper 2 unit * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

4.0 out of 5 stars ( 2 )

$2,249.95

$2,023.95

Quick Fuel QFX-Series Carburetors

These Quick Fuel QFX-Series carburetors feature an all-new die-cast aluminum main body, which has a lengthened venturi section for greater midrange torque and better airflow. The annular booster venturis are precision die-cast with CNC-machined billet aluminum inserts, providing smoother and more refined air entry, a stronger vacuum signal, less turbulence, and improved fuel emulsion for better combustion. The Quick Fuel QFX-Series carburetors use red anodized billet aluminum CNC-machined metering blocks featuring 3-circuit metering (gasoline carburetors), changeable emulsion, idle feed, and intermediate bowl and feed discharge. Next, the die-cast aluminum fuel bowl combines high strength with significant weight reduction. They feature dual threaded fuel inlets and outlets and dual sight glass holes to easily set the float levels. The Quick Fuel QFX-Series carburetors feature Quick Fuel's external linkage with four different links to select the amount of primary throttle opening before the secondaries open: moderate progressive (25 percent), medium progressive (40 percent), full progressive (50 percent), and 1:1.

4.86 out of 5 stars ( 7 )

$2,151.95

VEGE Remanufactured Long Block Crate Engines

VEGE remanufactured long block crate engines are an excellent foundation for budget-minded builds. These premium-quality refurbished engines are drop-in replacements for a wide range of stock vehicles—and can be retrofitted into additional applications. Each engine is reverse-engineered to ensure that any original defects are removed. Certified technicians recondition the long blocks to factory specifications, replacing wearable parts or machining them back to OE standards. The engines are thoroughly tested and calibrated to deliver maximum performance and long-term durability. Order the VEGE remanufactured crate engine recommended for your vehicle.

3.72 out of 5 stars ( 79 )

$2,039.99

The Right Stuff Performance Series Front and Rear Disc Brake Conversion Kits

Are you tired of having brake fade or not enough stopping power? The Right Stuff front and rear disc brake conversion kits give you a complete brake kit without breaking the bank. They manufacture these kits from quality materials to ensure performance and dependability. Stop your ride in style and safely with The Right Stuff and their disc brake conversion kits.

3.0 out of 5 stars ( 2 )

$2,067.60

On Sale

Holley Sniper 2 EFI 650 HP Return-Type Fuel Injection Systems with Power Distribution Module

Holley Sniper 2 EFI Return-Type Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, return line, external regulator, filters before/after the pump, fittings/hardware, and a low profile return-type drop-in pump module(1.275-inches above the tank mounting surface) that is designed for universal installation into fuel tanks that range from 7 to 12 in. deep * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

Not Yet Reviewed

$2,249.95

$2,023.95

Baer Brakes Baer Claw Pro+ Disc Brake Systems

Baer Brakes Baer Claw Pro+ disc brake systems are built to please the most demanding users. They include Baer 6P compact 6-piston calipers machined from 2618 forgings, resulting in the stiffest possible design, even at extreme operating temperatures. They use radial mounting configurations to disperse loads evenly, and internal fluid transfer tube passages for an ultra-clean look. Baer Claw Pro+ disc brake systems include brake rotors with zinc coated surfaces and a matched set of brake pads. The unique 2-piece rotors use an aluminum hat to reduce overall weight, allow for differential expansion of the rotor plates, and lower thermal transfer to the hub. Nearly 700 models are available for specific vehicle, bolt pattern, and axle applications.

4.5 out of 5 stars ( 8 )

$2,863.95

—

$3,399.95

Baer Brakes Track4 Disc Brake Systems

Baer Brakes Track4 disc brake systems give your front wheels stopping power and visual appeal! The Track4 systems feature a large 4-piston caliper and 13 in., one-piece rotors built to accurately dissipate heat for big brake performance at a great price. Baer calipers are manufactured in the USA from strong aluminum with stainless steel pistons to reduce the thermal transfer of heat to the brake fluid—and they have stainless steel abutments and anti-rattle (spring tension) clips. The rotors feature curved vanes for added stability, and they pull in air for cooling. High-grade, quality hardware is included; they use standard, off-the-shelf replacement pads. Get the most for your money, plus American craftsmanship--choose Baer Brakes Track4 disc brake systems, available for a wide range of bolt patterns and vehicle-specific applications.

5.0 out of 5 stars ( 1 )

$2,658.95

Ridetech Ridepro E5 Air Ride Suspension Control Single Compressor Systems

Ridetech Ridepro E5 Air Ride Suspension Control single compressor systems adjust vehicle height at the push of a button while maintaining balanced air springs. With sophisticated pressure and height algorithms, Ridepro E5 control systems tune air ride suspension for proper handling and world-class ride quality, so that each time your turn the ignition key, Ridepro E5 self-adjusts to ride height and compensates for changes in load. And adjusting vehicle height is as simple as choosing one of three presets. You can also control the system wirelessly by simply connecting a compatible smartphone via Bluetooth and using the Ridepro E5 app. RideTech RidePro E5 single systems feature and include: * Full color TFT LCD. 3.5 in. display with multi-touch capacitive touchscreen * 4-button silicone keypad with backlit symbols for quick vehicle height changes * "Ride Height On Start" automatic lift and level feature * Display and setup via control panel, smartphone app or laptop * Weatherproof ECM and heavy-duty connectors * Automatic weight compensation (with optional height sensors) * Bluetooth connectivity to most smartphones for wireless control * Aluminum 3-gallon tank * Ridepro valves * Thomas compressor * 1/4 in. air lines and fittings * Perfect for vehicles up to 3,500 lbs.

Not Yet Reviewed

$2,415.00

Borla S-Type Cat-Back Exhaust Systems

Borla S-type cat-back exhaust systems feature patented straight-through and multi-core technology to unleash hidden horsepower and produce a more aggressive sound and higher flow. Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive Borla Sound of Power respected by motoring enthusiasts everywhere. Each system is built from premium 300-Series austenitic stainless steel, superior to T-400 Series knockoffs (such as 409), to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow and power, and precision computer-controlled CNC manufacturing ensures an accurate fit. It's just what you'd expect from the world's most experienced (and most winning) exhaust brand.

4.79 out of 5 stars ( 940 )

$2,299.99

QA1 Level 1 Full Vehicle Handling Suspension Kits

Seeking improved stance, along with ride quality and handling? Turn to QA1's handling suspension kits for a full-vehicle upgrade that fits your needs. Available in three different levels of performance, these kits offer easy, bolt-in installation (some welding may be needed) and seamlessly work with whatever OE component each piece attaches to. And with different levels, you can build your car in stages, using QA1's parts list as a road map to get to the level of performance you want and have peace of mind knowing you won't have compatibility issues. QA1 Level 1 handling kits deliver everything needed in one shot, taking the guesswork out of the process. These full-vehicle upgrades are designed to boost performance while giving you steady, reliable comfort. All QA1 handling suspension kits are offered with or without shocks and struts—giving you the flexibility to obtain the shocks or struts and spring rates you need. Select the kit designed for your vehicle.

1.0 out of 5 stars ( 1 )

$4,256.95

Detroit Speed Rear Speed 2 Kits

Detroit Speed Rear Speed 2 kits work great with any of Detroit Speed's front suspension systems. Their components deliver improved handling with an increased spring rate. They're available with different suspension drop amounts and other options to ensure best performance. Rear Speed 2 kits are offered for a wide range of vehicles from the 1960s, '70s, and '80s.

Not Yet Reviewed

$4,149.95

Baer Brakes Baer Claw Extreme+ Disc Brake Systems

Baer Brakes Baer Claw Extreme+ disc brake systems are Baer's flagship offerings, featuring their forged Monoblock calipers mounted to 2-piece rotors. The Extreme+ systems employ current state-of-the-art race technology usually only found in very expensive race calipers. Baer now brings that technology to the road-going market. The 6S line of calipers represent Baer's most aggressive road offering and are suitable for virtually any level of track use. Optional R-Spec 6R calipers are a race version of 6S calipers; available for any Extreme+ system. The R-Spec calipers feature additional machining to the 6S calipers to save close to 2 lbs. per caliper and allow for top-loaded pads. Over 400 models are available for specific vehicle, bolt pattern, and axle applications. Features include: * MonoBlock calipers machined from a single piece of 2618 forged aluminum * The only 6-piston, forged, mono-block calipers offered to the road-going/street market * Stainless steel pistons, abutments, and noise-suppression springs * Staggered piston sizes to minimize pad wear * Uses the common D1247 (DR11) race pad backing plate, shared by many competition calipers * Dual seals (dust/weather and pressure) to meet D.O.T specifications * Caliper can accept 13.5 in. to 16 in. rotors * Machined, hand-painted logos * Available in a variety of powdercoat finishes * Uses correct banjo-style fittings; Baer does not use any pipe thread * Available for front or rear * Offers the exact same look front and rear—the only brake manufacturer that offers this! * Rear systems incorporate a drum-in-hat parking brake * Rear systems for C-clip axles include Baer's Verislide self-centering brackets * Systems include everything needed for each corner, including hoses and fittings (except for general fit applications)

3.0 out of 5 stars ( 1 )

$4,199.95

—

$4,606.95

RAM Pro Street Dual Disc Clutches

RAM Pro Street dual disc clutch kits are precision-balanced for smooth operation—and come equipped with a billet cover for optimum release length, a comfortable pedal effort, and a high diaphragm finger position for excellent high-RPM shifting capability. The sprung hub top disc absorbs shock and reduces driveline noise. Pro Street kits are available with your choice of an organic friction disc or a metallic disc. Organic disc models are capable of handling 500 to 800 hp; the metallic disc models can handle between 600 and 1,200 hp. RAM Pro Street dual disc clutch kits include a billet aluminum, SFI-certified flywheel with a steel insert that has sufficient mass to draw heat away from the clutch without distortion. Some kits are available with a steel flywheel. Order the clutch recommended for your vehicle and engine application.

3.0 out of 5 stars ( 1 )

$2,159.00

Ridetech TQ Series Shockwave Air Shocks

Ridetech TQ Series Shockwave air shocks mount just like coilovers on most vehicles—replacing the coil spring with an adjustable air spring for a huge range of tuning options. Shockwaves deliver exceptional ride quality, handling, and the ride stance you prefer. They're available for hundreds of car and truck applications. Order the shocks designed for your specific year, make, and model.

Not Yet Reviewed

$2,305.00

Ridetech TQ Coilover Shocks

Track quality—Ridetech TQ coilover shocks offer a performance level for competition. TQ coilovers feature a single rebound adjustment and a dual stage—high speed and low speed—compression adjustment. Ridetech also designed these monotube aluminum shocks with a remote reservoir that is connected with a 30 in. braided line for easy installation in a variety of applications. These supreme shocks are surrounded by powdercoated high-tensile premium steel CNC cold-wound springs that offer less weight, more resistance to bowing, and increased travel. There's ride quality, handling quality, and now track quality from Ridetech—the TQ series of coilover shocks for winning performance on road courses, race tracks, and extreme environments. Other premium features: * Impact-forged aluminum body * Anodized finished * CNC-machined billet hardware * Larger piston * Double sealed rod guide * 5/8 in. chrome shock shaft

Not Yet Reviewed

$2,110.00

ATK High Performance GM 350 330 HP Stage 2 Long Block Crate Engines

Give your ride new life with these ATK High Performance GM 350 330 hp/380 lbs.-ft. Stage 2 long block crate engines. These engines are based on the tried-and-true small block Chevy and are built to perform right out of the box. ATK hand-assembles and balances each engine using top-quality parts to help them produce awesome power. Whether you are replacing an older, tired engine or just looking for a little more performance, ATK has you covered. ATK GM 350 330 hp Stage 2 crate engines include the following: * Handpicked, OE remanufactured blocks * ATK cast iron cylinder heads * 76cc combustion chambers * 165cc intake runners * 1.94 in./1.5 in. valves * Stamped steel 1.5 ratio rocker arms * ATK dual plane intake manifold * OE crankshaft * PowerBond 8 in. balancer * OE 5.7 in. powder metal connecting rods * Hypereutectic flat top pistons * Hydraulic flat tappet camshaft * .465 int./.488 exh. cam lift * 224 int./234 exh. cam duration at 0.50 * 9.1:1 compression * Distributor * Valve covers * Timing cover and double roller timing set * Oil pan, pump, and pickup tube * OE style long water pump * 168 tooth flexplate

3.4 out of 5 stars ( 10 )

$3,750.99

1984 PONTIAC FIREBIRD Parts and Accessories