Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
1983 CHEVROLET CAPRICE Parts and Accessories
Showing In Stock Items. Show All 59 Items.
Edelbrock Performer EPS Intake Manifold and Carburetor Kits
Edelbrock Performer EPS intake manifold and carburetor kits contain all of the necessary pieces to upgrade your induction system. They include an Edelbrock Performer EPS aluminum intake manifold with either a natural aluminum finish or an EnduraShine finish, an intake gasket set, intake manifold bolts, a carburetor stud kit, and a Performer Series 600 cfm electric choke carburetor. The EnduraShine finish is a bright silver chrome finish that resists discoloration from heat and features a clearcoated top coat to enhance abrasion and chemical resistance. The Edelbrock Performer EPS intake uses an all-new runner design tuned to produce substantial torque increases. Ready for a change? Try Edelbrock Performer EPS intake manifold and carburetor kits for your musclecar, hot rod, truck, or ordinary street vehicle.
( 60 )
$754.95
On Sale
Holley Sniper EFI HyperSpark Distributor Kits
Holley Sniper EFI HyperSpark distributor kits were designed to make upgrading your ignition on a Sniper EFI-equipped engine simple. When installed concurrently with a new Sniper EFI system, the combination creates the easiest way to install EFI conversion on the market—and only four flying lead connections are required! The harness only requires one connection to a switched power source, battery positive, battery negative, and fuel pump power. The pre-terminated connectors and a built in 40A relay provides power to all of the components within the system. With the included Sniper EFI main harness you no longer need to run multiple wires to provide switched power for each individual component, which not only helps prevent wiring confusion, but it will also speed up your install time and clean up your engine bay. Simply route the harness and pre-terminated connectors to your HyperSpark coil, distributor, and ignition box and plug them in. Available for all popular engine combinations, these kits come with a distributor, coil, ignition box, and an integrated Sniper EFI harness. Order the application you need. Key features: * Plug-and-Play Sniper EFI main harness replaces the standard Sniper EFI harness with four loose leads, battery positive, battery ground, switched 12 V, and fuel pump power, for a simple and streamline installation * Designed for existing or new Sniper EFI installations (the HyperSpark Master Kit harness retains the same flying lead wire colors as the Sniper EFI main harness; new installations will not use the Sniper EFI standard harness or coil driver * Complete ignition system in a box, including: HyperSpark ignition box, HyperSpark ignition coil, HyperSpark distributor (for your application), and a plug-and-play main harness * HyperSpark distributors feature a Hall Effect crank trigger sensor providing a noise-free rpm signal to the Sniper ECU * Patented clear installation cap eliminates any confusion while installing the distributor * HyperSpark CD ignition box is seal and powder coated to be installed in the harshest of locations * External LED on HyperSpark CD Ignition box helps verify 12 V, cranking rpm, and low battery voltage * 135mJ of spark energy when used with the HyperSpark ignition coil, ensures complete combustion * Integrated ignition coil bracket simplifies mounting the Ignition coil * Ignition coil connector removes any doubt of loose connections at the Ignition coil * Enables timing control on a Sniper EFI Installation
( 22 )
$1,024.95
$921.95
QA1 GM 2.0 Street Control Arms
QA1 GM 2.0 Street control arms provide increased positive caster compared to OE arms and are among the lightest available. These arms feature a lower unsprung weight and improved performance without sacrificing durability. Each arm includes a QA1 integrated ball joint design which is stronger than OEM and rebuildable for tunability, providing long-term reliable service. These arms are designed with billet cross shafts for reduced weight and durability for the long haul. Double-sheer lower mounts are coil-over ready for a clean installation. QA1 GM 2.0 Street control arms look incredible and use no unsightly additional adapters! Form meets function with these newly designed arms that look and perform great without requiring painstaking restoring like factory stamped steel control arms.
( 24 )
$854.95
Air Lift WirelessAir 2nd Generation On-Board Air Compressor EZ Mount Systems
Air Lift WirelessAir 2nd generation on-board air compressor EZ mount systems give you everything you need for the fastest, easiest installation possible. EZ Mount systems package the manifold and upgraded, heavy-duty compressor into one convenient, pre-assembled and factory-tested bracket—giving you everything you need to have full control of your air springs in no time at all. Control the air like a boss with your Air Lift WirelessAir 2nd generation EZ mount kit. Features and items: * Inflate and deflate each air spring independently to different pressures * LCD-display wireless controller * One-touch control from inside or outside vehicle is perfect for uneven/top-heavy loads * Two user-defined memory buttons * Compact, dual-path design * Bluetooth-enabled manifold allows for over-the-air software updates * All wiring, hardware, and fittings required for installation
( 8 )
$936.99
On Sale
Lakewood Safety Bellhousings
Lakewood safety bellhousings are designed for maximum performance and durability. They are cut on CNC 5 axis laser cutters rather than plasma cutters to improve finish quality, reduce heat damage and warpage from the plasma cutter, improve speed of manufacture, and make them all exactly the same. All bellhousings feature a scalloped plate on the bottom of the transmission surface made from G70 grade steel (70,000) psi which will help eliminate stripping the transmission bolts. The engine plates are made of H60 grade material and the bells are roto-brated after welding to relive any stresses created from the hydro forming, annealing, or welding process prior to machining and painting. The roto-brating process also closes the metal on the outer surface making them stronger. Ever wonder how the SFI tests bellhousings like these Lakewood safety bellhousings? First, they bolt the bellhousing to a machine with a cast iron flywheel and saw inside it. Then they spin the flywheel, causing the saw to cut through it until it explodes. If the bellhousing can contain the explosion, the bellhousing is approved. These safety bellhousings are a safeguard to minimize the destructive effects of such an explosion. Don't take unnecessary chances with your safety and the safety of innocent bystanders--Lakewood not only provides top-notch products, they also provide peace of mind.
( 48 )
$921.95
$828.95
QA1 Rear Pro Coilover Conversion Systems
Here's an easy way to convert your stock rear suspension to a coilover suspension. You get everything you need with these QA1 Rear Pro coilover systems, from shocks to nuts and bolts, complete installation instructions, and even decals!
( 104 )
$886.95
—
$955.95
Griffin Performance Fit Radiator Combos
Griffin Performance Fit combos offer the right fit with the right performance--and the right price! These high performance combos deliver cooling capability for extreme horsepower mixed with modern styling, do-it-yourself installation, and American craftsmanship. In these perfect combinations, Griffin packages their lightweight aluminum radiators constructed with 1.25 or 1.50 in. induction-welded MegaCool tubing, high performance electric fans, hand-formed aluminum shrouds, wiring harnesses, and radiator caps for a complete install. Choose the style and size needed to equip your ride with the ideal solution for engine temperature control--Griffin Performance Fit combos. * Griffin Performance Fit radiator combos may require modifications for installation. * See Griffin Exact Fit radiator combos for installation with no modifications.
( 239 )
$837.00
—
$995.00
On Sale
Quick Fuel SS-Series Carburetors
These Quick Fuel SS-Series carburetors are designed to offer the power of a race carburetor in a streetable package that weighs 5 lbs. less than other carburetors. Manufactured completely from aluminum, they allow you to change the idle feed and offer power valve channel restrictions and idle and high-speed air bleeds for the ultimate in tunability. The solid-state, electric-choke Quick Fuel SS-Series carburetors have billet throttle bodies, billet metering blocks, 4-corner idle systems, secondary jet extensions, and notched secondary floats. The vacuum secondary carburetors feature fuel bowls with a single-sight glass window, while the mechanical secondary carburetors have dual-inlet, dual-sight glass 4500-style fuel bowls and include additional links to tune the secondary opening rate. Quick Fuel has done it--they've created all-aluminum Super Street carburetors that are perfect for your high performance street machine.
( 48 )
$1,024.95
$874.95
—
$972.95
QA1 Pro Coilover Systems
QA1 Pro coilover systems are engineered from the ground up to offer unmatched performance over stock suspension setups. Pro coilover systems utilize adjustable and non-adjustable coilover shocks and springs designed specifically for replacing the factory shocks and springs. This combination offers ride height adjustment and variable position valving adjustment (where applicable) for performance not found in other kits. Choose QA1 Pro coilover systems for your next suspension upgrade.
( 349 )
$964.95
On Sale
Quick Fuel Street-Q Carburetors
Legendary performance offering more value—Quick Fuel Street-Q carburetors deliver the power without the price. How? By retaining what's most important: the function. Street-Qs feature lightweight cast aluminum metering blocks and cast throttle bodies instead of billet components, so they cost less. But, the Q-Series performance remains: 2-circuit metering, down-leg boosters, changeable idle, high-speed air bleeds, and 4-corner idle. Plus, their universal throttle lever design accommodates Ford A/T kickdowns, 700-R4 bracket mounting holes, and the ability to mount brackets for Chrysler vehicles. Quick Fuel Street-Q carburetors fuel your passion and your budget with race-bred performance at no-frills pricing. Order the model designed for fitment on your vehicle application.
( 26 )
$849.95
—
$921.95
$763.95
—
$828.95
Edelbrock Performer Air-Gap Intake Manifold and Carburetor Kits
Upgrade your induction system with superior paired performance! Edelbrock Performer Air-Gap intake manifold and carburetor kits contain all of the necessary pieces to upgrade your induction system. They include a Edelbrock Performer Air-Gap aluminum intake manifold, intake gasket set, intake manifold bolts, a carburetor stud kit, and an Edelbrock Performer Series 600 cfm electric choke carburetor. The intake uses an open air space that separates the runners from the hot lifter-valley cover. This results in a cooler, denser charge that means more power and excellent throttle response. Ready for a change? Try Edelbrock Performer Air-Gap intake manifold and carburetor kits for your musclecar, hot rod, truck, or ordinary street vehicle.
( 7 )
$935.95
On Sale
Lakewood Bellhousings
Lakewood bellhousings are an excellent choice for street rods, street machines or oval track applications where the use of an SFI-approved bellhousing is not required. These units are made from 0.250 in. thick hydro-formed steel or lightweight cast aluminum. They're designed for use with hydraulic and mechanical fork throwout bearings--and utilize factory bolt patterns for easy installation. Order the model recommended for your transmission make and model.
( 38 )
$767.95
Dakota Digital VHX Series Direct-Fit Analog Gauge Systems
Stay ahead of the curve with fresh instrumentation, like the Dakota Digital VHX direct-fit analog gauge systems. Ideal for classic car restorations, this innovative line features dozens of single dials, clusters, and multi-gauge panels, which install into your vintage ride with no modifications needed. We're talking units for various models of Ford, Chevy, Mercury, Oldsmobile, Jeep, Toyota, Buick, Pontiac, and Dodge … with new "replacements" available for cars and trucks as far back as 1932! Depending on the system you select, you could receive data readings for as many as 20 automotive functions; and, bringing the retro dashboard displays into the 21st century are bright LCD message centers, backlit faces, and fully lit needles. These gauge kits are equally impressive behind the scenes, with solid-state sensors, precision stepper motors, and customizable data readouts. Dakota Digital gauges have revolutionized the industry—just think what they'll do for your driving experience!
( 492 )
$945.25
Ringbrothers Billet Air Frame Hood Hinges
Ringbrothers helps you customize your ride with their billet hood hinges. Making your ride show-quality means thinking about the little things--the details--and these beautiful hood hinges open up top-show possibilities! Ringbrothers invented the first billet hood hinges. They have a superior product line because of years of perfecting the machining process. For example, their special cutting fluid is mixed to a specific concentration and the water is treated to the proper ph levels before machining begins. Additionally, all of the cutters are put into a sequence during machining to eliminate as many unwanted scratches as possible. These billet hood hinges are precision-machined from 6061-T6 aluminum and include your mounting hardware. Rest assured that their quality components and materials will provide you with years of hassle-free operation. It's time to upgrade those stock hinges with quality-driven Ringbrothers billet hood hinges! Features include: * Machined from 6061-T6 billet aluminum * Direct replacement fitment * No modifications necessary * Hinges place your hood in the same position every time * Installation hardware and instructions included * Available for fiberglass or steel hoods * Available in two styles and three finishes
( 8 )
$800.00
On Sale
Summit Racing™ MSD Complete Ignition Combos
It's time to outfit your vehicle with a high-quality, high performance ignition system—and these MSD combos from Summit Racing™ make it a breeze! The kits start with a 6A digital CD ignition box, then add a high-efficiency Blaster coil and a Pro-Billet distributor. We finished the combos with a complete set of Street Fire wires to deliver all of that powerful spark! Wake up your street and strip engine with a powerful Summit Racing™ MSD complete ignition combo, available for applications as far back as the 1950s.
Not Yet Reviewed
$1,055.40
$949.05
QA1 GM 2.0 Drag Race Control Arms
Designed for the specific needs of drag racing, QA1 GM 2.0 drag racing control arms are bolt-in upgrades to the original suspension or outdated tubular control arms. Besides improving overall handling, ride quality, and vehicle stance, these arms improve factory suspension geometry and pave the way for planning additional upgrades. The increased positive caster design improves straight line stability. QA1 arms are compatible with OE-style sway bars and come with droop stops on the upper arms with bump stops on the lowers. The droop stops are adjustable to enable the perfect front-end rise for optimized launches. These arms feature ultra-low friction composite bushings for smooth bind-free movement and optimal weight transfer during launch. The high-strength low alloy steel enables a thinner wall construction and results in an overall lightweight package. Note: GM 2.0 drag race arms are not compatible with factory coil springs and must be used with a coilover system.
( 2 )
$776.95
—
$945.95
Air Lift WirelessAir 2nd Generation On-Board Air Compressor Systems
Air Lift WirelessAir 2nd generation on-board air compressor systems allow you to inflate and deflate each air spring independently to different pressures. The one-touch control from inside or outside the vehicle makes them perfect for uneven or top-heavy loads. And with two user-defined memory buttons, WirelessAir can remember your frequently used settings. Control the air like a boss with your Air Lift WirelessAir 2nd generation kit. Features and items: * LCD-display wireless controller * Compact, dual-path design * Bluetooth-enabled manifold allows for over-the-air software updates * Heavy-duty air compressor * All wiring, hardware, and fittings required for installation
( 1 )
$778.99
Yukon Gear & Axle Ring and Pinion Gear and Installation Kit Combos
Yukon Gear & Axle ring and pinion gear and installation kit combos are complete packages that include front, rear, or front and rear ring and pinion sets, along with the most complete master overhaul kits on the market—giving you everything needed to re-gear the front and/or rear differentials in one package. Conceived to handle some of the harshest conditions, these combos utilize the latest design and manufacturing technologies to afford you quiet running gear that's strong and easy to set up. The included Yukon master rebuild kits undergo extensive research to ensure a perfect fit and hassle-free install with the very best components. Order the combo designed to fit your application.
( 14 )
$750.99
—
$852.99
Wilwood Classic Series Dynalite Front Brake Kits
Wilwood Classic Series Dynalite front brake kits deliver consistent stopping power for your classic cars. The forged Dynalite calipers combine technology and style to create stronger, more reliable clamping power that's proven to outperform existing styles of this popular caliper size. The complete packages also include solid surface or drilled and slotted rotors, premium brake pads, brackets, and all required hardware. Kits are available to accommodate the needs of daily driving and show cars. Order the model designed for your vehicle application.
( 259 )
$766.55
Yukon Gear & Axle Carrier Bearing Pullers
Whether you're setting up ring and pinion gears or doing general differential repair, do it with Yukon Gear & Axle carrier bearing pullers. These tools work with an impact gun to quickly and safely remove your carrier bearings while minimizing the risk of damage. These pullers come with a handy bench top-stand and work on most standard size carrier bearings and pinion bearings on differentials. For all of your drivetrain needs, use Yukon Gear & Axle!
( 5 )
$769.99
SSBC-USA Drum to Disc Brake Conversion Kits
Upgrade your braking system with SSBC-USA's drum to disc brake conversion kits. You'll enjoy the rhythm of modern stopping power afforded you with their cast iron or aluminum calipers, brake pads, rotors, and all necessary brackets, hardware, and bolts. Order the SSBC-USA drum to disc brake conversion kits designed for fitment on your vehicle—front, rear, or both.
( 33 )
$786.00
QA1 GM 2.0 Pro-Touring Control Arms
Designed for the pro-touring GM enthusiasts, QA1 GM 2.0 pro-touring control arms are a simple upgrade over original suspension or worn and outdated tubular control arms. The pro-touring arms are also for those wanting to improve their overall handling, ride quality, and vehicle stance. These arms will improve suspension geometry over the factory configuration and pave the way for planning additional upgrades. The high-strength, low alloy steel enables optimized thinner wall construction and results in overall lighter weight. The increased positive caster design improves straight line stability. Pro-touring arms also feature QA1's stronger, low maintenance, and rebuildable ball joints which feature integrated dust boots. Note: These control arms are not compatible with OE-type springs, a coilover system must be installed. QA1's arms will accept factory type sway bars and include upper and lower bump stops.
( 16 )
$945.95
Griffin Exact Fit Radiators
Griffin exact fit radiators feature an OEM-style stamped tank and are made of high-quality lightweight aluminum. They provide seamless installation with no modifications required—and will deliver optimum cooling performance for your auto, truck, musclecar, or hot rod. The radiators are available in downflow and crossflow styles, with many size options for specific vehicles.
( 180 )
$851.00
—
$941.00
PRW Pedestal-Shaft Rocker Arms
PRW pedestal-shaft rocker arms are made from 6061-T6 or Series 7000 2024 aircraft quality aluminum alloy extrusions. Each rocker body is relieved for extra valve spring clearance and anodized for added strength. Each rocker body is shot-peened and machined for extra valve spring clearance; then anodized for better cooling and added strength. Each rocker arm incorporates needle roller bearings from the finest manufacturers in the world. CNC-machined billet steel pedestals, center-ground steel alloy rocker shafts, and PRW Custom-4135 alloy steel fasteners, valve lash adjusters and 12-pt. lash nuts comprise the foundation of these rocker arm systems. The kits come with the components and necessary hardware required for a professional installation. Order the rocker arms designed for your application needs. Features and characteristics: * Rated 750 lbs. open spring pressure * Internal oiling system for long-lasting performance * SAE 42100 full complement precision needle and cage roller bearings * Available in 1.5 or 1.6 ratio, and 1.5/1.6 split-ratio assemblies
Not Yet Reviewed
$775.05
