1982 Ignitions & Electrical - Free Shipping on Orders Over $109 at Summit Racing

On Sale

Holley Dominator EFI Vehicle Management Systems

Holley Dominator EFI vehicle management systems are intended for all engine applications, from street to high-end racing. They have nearly unlimited capabilities to control any power adder, input, or output that you can throw at them. Features include: * 12 sequentially driven 8:2 peak and hold injector drivers capable of driving up to 24 low or high-impedance injectors * 12-channel distributorless ignition outputs capable of directly driving smart ignition coils or Holley DIS coils * Plug-and-play control of factory GM 24x and 58x LSX engines * Integrated electronic transmission control--currently can control GM 4L60E and 4L80E * Integrated dual channel wideband oxygen sensor controls, work with NTK or Bosch sensors * Integrated drive by wire throttle body control, can control two drive by wire throttle bodies * 4-stage progressive nitrous oxide controller * Turbo boost control * Integrated water/methanol injection control * Integrated data acquisition and control allowed with massive amount of programmable inputs and outputs * Internal data logging standard with a huge 2 GB of memory * Self-tuning fuel table strategy greatly simplifies tuning process * Store and change between four calibrations * Individual cylinder fuel and spark control allows you to unlock your engine's potential

4.17 out of 5 stars ( 6 )

$3,149.95

—

$3,349.95

$2,833.95

—

$3,013.95

MSD Pro Mag Lite Magnetos

MSD took their original Pro Mag 12 distributors, added some new features to build performance, and subtracted 3 lbs. to help you get down the track faster. The results are the Pro Mag Lites. They utilize a magnetic pickup design with 16 rare earth magnets for rock-steady performance without recharging. They deliver 12 amps and 40,000 V worth of spark energy, feature built-in rev control that's good for up to 12,000 rpm, and use an all-billet housing for superior durability. They're compatible with MSD's crank trigger system.

Not Yet Reviewed

$2,664.95

—

$3,899.95

On Sale

Summit Racing™ Data Acquisition Kit and Dash Panel Pro Packs

Summit Racing™ data acquisition kit and dash panel Pro Packs provide reliable, efficient, and affordable performance for today's professional and sportsman racers alike! These kits pair up a dash panel designed for perfect fitment in your specific vehicle, together with a cutting-edge digital gauge unit that monitors up to dozens of automotive parameters. Some models feature Racepak instrumentation, and others include interactive Holley controls. Order the Pro Pack assembled for your application.

Not Yet Reviewed

$4,285.85

$2,009.90

—

$3,893.85

Haltech Nexus S3 ECUs with Plug-and-Play Harness

The Nexus S3 ECU is the successor to the acclaimed Elite 2500, offering a serious upgrade in performance and functionality. With advanced features, user-friendly interface, and seamless connectivity, the S3 redefines the standard for engine management systems in the automotive industry. Haltech offers several ways to connect your S3 ECU. If you are using a factory harness and are after an easy ECU upgrade, Haltech Nexus S3 ECUs with a plug-and-play adapter harness are excellent choices. They plug directly into the ECU and have a set of factory connectors on the other side which plug straight into the factory harness, allowing you to be up and running in just a few hours. The included quick-start guide will walk you through installation of the adapter harness into your vehicle. Select the Haltech S3 ECU and harness kit designed for your vehicle. Kits include: * Nexus S3 ECU * Injection molded plastic plug-and-play adaptor harness * M14 x 1.5 air temp sensor with matching plug and pins * Auxiliary I/O 16-pin Tyco plug and pins

Not Yet Reviewed

$2,589.99

Haltech Nexus S2 ECUs with Plug-and-Play Harness

The Nexus S2 ECU is the successor to the acclaimed Elite 1500, offering a serious upgrade in performance and functionality. With advanced features, user-friendly interface, and seamless connectivity, the S2 redefines the standard for engine management systems in the automotive industry. Haltech offers several ways to connect your S2 ECU. If you are using a factory harness and are after an easy ECU upgrade, Haltech Nexus S2 ECUs with a plug-and-play adapter harness are excellent choices. They plug directly into the ECU and have a set of factory connectors on the other side which plug straight into the factory harness, allowing you to be up and running in just a few hours. The included quick-start guide will walk you through installation of the adapter harness into your vehicle. Select the Haltech S2 ECU and harness kit designed for your vehicle. Kits include: * Nexus S2 ECU * Injection molded plastic plug-and-play adaptor harness * M14 x 1.5 air temp sensor with matching plug and pins * Auxiliary I/O 16-pin Tyco plug and pins

Not Yet Reviewed

$2,189.99

Haltech Elite 2500 ECU with Plug'n'Play Harness

Haltech's Elite 2500 ECU with Plug'n'Play harness provides the fastest and most cost-effective way to wire your race car or engine conversion! Simply connect a handful of labelled wires, and this plug-and-play product allows you to be up and running in just a few hours. The quick-start guide will walk you through installation of the Haltech Plug'n'Play harness into your vehicle. The guide is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration. ECU Overview: Elite 2500 is a two-connector, stand-alone ECU ideal for popular late model performance and racing applications. Recommended for 4, 6, and 8-cylinder, drive-by-wire (DBW) or 2, 3, 4 rotor engines, EFI conversions, and engines with multiple variable camshafts. The ECU features a robust environmentally sealed water-resistant IP67-rated case, drive-by-wire throttle control, intake and exhaust cam control, short-term and long-term map learning, dual channel knock control, and much more, providing engine calibrators with the tools they need to get the job done right. The Elite 2500 ECU is now paired with the new Nexus Software Programmer (NSP) that brings levels of functionality and user-friendliness never seen before in an engine control package. Together they offer true cutting-edge technology to both tuners and performance enthusiasts worldwide. * Supports 1 to 12-cylinder engines * 2 to 4 rotor engines * Normally aspirated or forced induction * Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP) or Mass Air Flow (MAF) * Staged, sequential, semi-sequential, batch or multipoint injection patterns * Distributor ignition systems, multi-coil systems, expand CDI range or Haltech Multiplex CDI systems * Connect to a wide range of display dashes and expansion devices via CAN. * Waterproof Case (with pocket cover fitted) * 8 x fuel injection outputs * 8 x ignition outputs * 12 x digital outputs * 10 x analogue voltage inputs * 4 x synchronized pulsed inputs * 4 x dedicated inputs (dual knock, ignition switch and onboard MAP Sensor) * 2 x dedicated engine position inputs with extensive trigger type support * Up to 45 channels of input and output (I/O) expansion (via CAN) * USB Laptop communication (Windows) * Now using the new NSP Calibration Software Harness features: * An efficient Haltech Plug'n'Play product that allows you to be up and running in just a few hours * The quick-start guide will walk you through installation of the Haltech Plug'n'Play harness into your vehicle * The guide is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration Notes: Please confirm your alternator connector (see the product quick start guide) and order an alternator adaptor if required. (HT-040090 or HT-040091) ignition coils and harnesses are not included, Please order 8 x HT-020102 and/or HT-045657 if required.

Not Yet Reviewed

$2,899.00