Availability
1982 Parts and Accessories
Showing In Stock Items. Show All 177 Items.
Not Showing Customizable Items. View Customizable Items.
On Sale
MSD 8.5mm Super Conductor Spark Plug Wire Sets
MSD 8.5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per foot—but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft. of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference "choke." This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD's 8.5mm Super Conductor wire sets are available in custom or universal-fit applications, assembled or not, with a variety of terminal and boot end options.
( 2002 )
$114.95
—
$215.95
$103.45
—
$194.35
On Sale
MSD Street Fire HEI Distributors
Street Fire HEI distributors are the value-line brand from MSD Ignition. They offer a quality designed alternative to the bottom bargain parts that spring up in the marketplace. Knowing the importance of a centrifugal advance in a distributor, MSD engineers made sure the Street Fires include an advance assembly with coated weights and welded weight pins. The units are also fit with the same distributor gear that's used on the MSD Pro-Billet models. The metallurgy of this gear has been refined for years to perform through the harshest conditions. Inside, the ignition module and coil work together to produce a stout spark to light the fuel mixture for great performance. Order the Street Fire model recommended for your vehicle and engine application.
( 291 )
$222.95
—
$255.95
$200.65
—
$230.35
On Sale
Holley Mechanical Fuel Pumps
Holley Street Performance mechanical fuel pumps are designed to work with stock or mildly modified engines. Ranging in performance styles of 80 to 225 gph, their body castings can be rotated 360 degrees to ease mounting in difficult places and they have large orifices for high flow rates. These pumps are not compatible with methanol or alcohol fuels and should not be used with fuel injection systems. A fuel pressure regulator is required for 130 gph versions.
( 361 )
$138.95
—
$255.95
$107.22
—
$230.35
On Sale
Holley Track Series Valve Covers
Holley Track Series valve covers are GM licensed and provide an excellent way to add high-end appeal to your favorite Chevy engine. These lightweight, yet tough valve covers are constructed of 6061 T-5 sheet aluminum, precision TIG-welded for a proper fit. They feature laser-etched Chevrolet and Bowtie emblems. The covers are available in silver anodized or black coated finishes, along with various heights to clear most popular rocker arm combinations. All models include mounting hardware for quick and simple installation.
( 75 )
$204.95
—
$235.95
$184.45
—
$212.35
On Sale
XS Power AGM Batteries
XS Power AGM batteries are some of the lightest racing batteries on the market. Independent test results have proven that they outperform other battery models that outweigh these power providers by up to 20 lbs. Cutting-edge lead acid battery technology produces more energy in a smaller space because each cell is compressed before case insertion, resulting in efficient power-producing packages that are completely sealed with no need to ever add water. This design is ideal for the abuse of racing, making these the batteries of choice for demanding racers and Monster Truck drivers who need top performance and reliability. When you are pushing to power the impossible, you need the non-stop capabilities of the XS Power AGM batteries best suited for your application. Product features include: * Designed to be an inch shorter than what the competition offers for fitting in places where space is at a premium * Deep-cycling ability and ultra-low internal resistance results in high cranking amps and excellent vibration resistance * Variable position mounting (except upside-down) thanks to the no-spill design * Offered in 6 V, 12 V, 14 V, and 16 V models
( 288 )
$229.99
—
$239.99
$206.99
—
$215.99
On Sale
Flowmaster 50 Series Delta Flow Mufflers
Flowmaster 50 Series Delta Flow mufflers are designed to produce a mellow, deep sound. They're milder on the outside of the vehicle than the 40 Series mufflers and are significantly quieter on the inside. These mufflers combine the increased horsepower and torque you've come to expect from Delta Flow technology with the performance sound and feel that makes Flowmaster famous.
( 372 )
$168.95
—
$188.95
$152.05
—
$170.05
On Sale
Bestop TrailMax II Classic Seats
Bestop TrailMax Classic II seats provide the maximum in seating comfort, durability and safety. The feature premium vinyl or fabric that maintains its shape in any temperature and is mildew resistant. The specially designed Atlas frame assembly is sturdy and resists corrosion. The Bestop TrailMax Classic II seats contain variable rate of resistance springs, designed for comfort on the road and support on the trail. Internally, the high density closed cell foam is used to minimize fatigue and to maintain the seat shape.
( 17 )
$229.99
$195.49
On Sale
Bestop TrailMax II Seats
Bestop TrailMax II seats provide the maximum in seating comfort, durability and safety. The feature premium vinyl or fabric that maintains its shape in any temperature and is mildew resistant. The specially designed Atlas frame assembly is sturdy and resists corrosion. The Bestop TrailMax II seats contain variable rate of resistance springs, designed for comfort on the road and support on the trail. Internally, the high density closed cell foam is used to minimize fatigue and to maintain the seat shape. Built-in headrests provide additional comfort, and the stationary high back design provides excellent support.
( 30 )
$219.99
$186.99
On Sale
Yuasa AGM High Performance Maintenance-Free Batteries
Yuasa AGM high performance maintenance-free batteries have absorbed glass mat (AGM) technology and provide you with greater cranking power with 12 extra plates per battery over your standard AGM battery. They are the perfect fit for people who have better things to do than battery maintenance. They are permanently sealed, never need refilling, and are ideal for motorcycles, scooters, ATVs, riding mowers, and personal watercraft. Yuasa AGM high performance maintenance-free batteries feature a spill-proof design, which means that there is virtually no possibility of leaks. These batteries feature advanced lead-calcium technology that pumps up starting power. They also hold voltage longer and need less charging in standby or storage modes, like during winter storage.
( 263 )
$108.99
—
$156.99
$101.36
—
$152.28
On Sale
MSD HEI Coils
MSD HEI coils increase spark energy when used with MSD HEI HEAT modules. Now you can replace your stock coil with these high-energy unitized coils for HEI distributors. They have low-inductance, high-temperature windings which charge the coil faster to give you increased spark energy at higher rpm. The premium epoxy filled construction is designed to withstand harsh race applications, as well as the wear and tear that daily usage dishes out, and still deliver more spark energy to the spark plugs.
( 39 )
$125.95
$113.35
On Sale
Professional Products CrossWind Intake Manifolds
These CrossWind intake manifolds from Professional Products feature identical plenum and runner designs to the Typhoon. The main difference is that there is an open area under the plenum chamber. This feature is sometimes called an air gap design. The air flowing under the plenum provides a cooler charge for the incoming air with less heat transfer from the engine. This cooler air charge provides additional power.
( 43 )
$155.99
—
$229.99
$140.39
—
$206.99
On Sale
MSD Steel Distributor Gears
MSD's high-grade steel distributor gears are burnished for a smooth, scuff-free finish, and are machined for precise gear mesh. Excessive clearance causes timing fluctuation throughout the rpm range, resulting in lost horsepower, so MSD also designed these gears for tighter mesh between the camshaft and distributor drive gears.
( 34 )
$145.95
—
$161.95
$131.35
—
$145.75
On Sale
MSD Digital GM High Energy Modules with Rev Limiters
MSD Digital GM high-energy modules with rev limiters allow you to adjust the rpm limit between 5,000 and 9,000 rpm. True high-performance modules built for HEI distributors, they produce 50 percent higher coil drive currents than the stock module. This saturates the coil faster, which gives you more spark energy at top speeds. The results are increased horsepower and rpm range, and improved starting. When used with MSD's HEI coil, these plug-in modules create a potent high-energy spark to 9,000 rpm. MSD GM HEI modules replace all 4-pin modules used in HEI distributors with a vacuum advance canister. They can be used with factory, aftermarket, or MSD HEI distributors.
( 67 )
$181.95
$163.75
On Sale
Yuasa GYZ Maintenance-Free Batteries
Yuasa GYZ maintenance-free batteries use absorbed glass mat (AGM) technology that was designed to eliminate water loss. Factory filled with battery acid, these batteries are permanently sealed. What does that mean for you? It means you'll never need to fill the water level or check the acid level again. These GYZ series batteries are supplied "Factory Activated" (nonspillable). Yuasa is your go-to source for all of your powersports battery needs.
( 127 )
$184.99
—
$229.99
$172.04
—
$213.89
On Sale
Flowmaster Super 44 Series Mufflers
Flowmaster Super 44 Series mufflers use the same technology as the original Super 40 mufflers—but also offer some distinct advantages. The Super 44s deliver a deep, rich tone with an improved flow path radius, optimum internal flow, and sound control engineering, all created with Delta Flow technology. They're the most aggressive, deepest sounding, highest performing 4 in. case street mufflers that Flowmaster has ever built. These American-made, all-black mufflers exceed OEM specifications for use on street cars, race cars, and sport trucks. Super 44s are ideal when dynamic sound, torque, and horsepower improvements are demanded in a smaller high performance muffler. Their maximum performance and improved flow path will generate more torque and power than ever before! If you really want to hear your exhaust system inside as well as outside of your vehicle, then order the Flowmaster Super 44 muffler best suited to fit your application.
( 402 )
$137.95
$124.15
On Sale
REV Wheels 100 Classic Series Polished Wheels
As a revolutionary wheel manufacturer providing the highest quality rims through innovation and cutting edge style, REV Wheels offers a full portfolio—including their 100 Classic Series polished wheels. They'll amp up your ride's aesthetics with some old-school charm in a classic 5-spoke design that is sure to look great on both old and new muscle cars! These sleek wheels deliver timeless style and classy appeal, making them a stellar replacement for those generic factory rims. Choose from a variety of configurations to complement your vehicle and turn more heads wherever you drive with the stylish REV Wheels 100 Classic Series polished rims designed to fit your application!
( 11 )
$185.95
—
$230.95
$167.35
—
$207.85
On Sale
Summit Racing™ Harmonic Balancer and Flexplate Combos
These Summit Racing™ harmonic balancer and flexplate combos are a great way to finish off your engine rebuilding project. They include a new performance balancer, flexplate, balancer bolt and flexplate bolts all in one affordable package.
( 2 )
$182.48
$180.13
On Sale
Bestop Seat Sliders
Bestop seat sliders are compatible with TrailMax and factory seats, for instance, bracketing your seat securely and allowing you to reach the pedals with all the comfortable leg room you need. They're easy to install replacements for original equipment, and constructed to specifications that make them a no-drill installation. Bestop seat sliders are also chemically-treated and powdercoated for rust-resistance, ready for all types of weather elements. Choose the fitment needed for your particular vehicle, and order one for the driver's side, passenger side, or both.
( 7 )
$149.99
$127.49
On Sale
Mr. Gasket Aluminum Valve Covers
Mr. Gasket aluminum valve covers are fabricated from 100 percent TIG-welded 6061 T-5 aluminum sheeting for a perfect lightweight fit. Available in natural, polished, powdercoat, or anodized finishes, they'll enhance the appearance of any engine compartment. The covers feature an extended sealing lip to positively locate and secure the gasket from moving, eliminating oil leaks. These valve covers can be ordered with plain or finned tops, and each piece includes a 1 1/4 in. diameter breather hole (except where noted). Order the model designed for fitment on your make/model and engine type.
( 79 )
$220.95
—
$228.95
$198.85
—
$206.05
On Sale
ION Alloy Series 71 Silver Machined Wheels
Order a set of ION Alloy Series 71 wheels to give your vehicle a retro look. They're manufactured from one-piece cast aluminum and feature a machined finish to give them a natural aluminum look. Series 71 rims are available in 14, 15, or 16 in. diameters, numerous bolt patterns, and other size options. ION Alloy Series 71 wheels feature an amazing hole and rivet design--and include a chrome center cap.
( 21 )
$128.99
—
$162.99
$116.09
—
$146.69
On Sale
Koni Sport Shocks and Struts
Sport shocks and struts from Koni are carefully designed to provide exceptional road-holding and handling properties, combined with an acceptable level of comfort. They offer responsive steering and cornering, improved body control, and limited body movements when braking and accelerating, resulting in a direct feel and excellent wheel-road contact.
( 81 )
$186.85
—
$267.97
$149.48
—
$214.37
On Sale
ION Alloy Series 171 Polished Wheels
ION Alloy Series 171 wheels feature a classic round, 8-hole design for excellent air flow to the brakes, and 360 degree contact between the inner and outer wheel for excellent weight and impact resistance. They are manufactured from one-piece cast aluminum with a fully polished finish. All ION Alloy series 171 wheels include a center cap and are built for durability.
( 8 )
$184.99
—
$198.99
$166.49
—
$179.09
On Sale
Hays Heavy-Duty Flexplates
Hays heavy-duty flexplates for high performance and competition engines are constructed from a thicker-than-stock steel plate. This enables them to withstand the stress of high-stall torque converters and high-rpm engines. While factory stock plates tend to crack around the crankshaft hub when punished under high-torque and rpm conditions, the thicker Hays flexplates can handle the force. These heavy-duty flexplates are supplied with a ring gear that is securely welded in place. All Hays heavy-duty flexplates are zinc-dichromate plated to resist corrosion and SFI-certified under specification 29.1.
( 63 )
$158.95
$143.05
On Sale
REV Wheels 107 Classic Rally Series Silver Wheels
As a revolutionary wheel manufacturer providing the highest quality rims through innovation and cutting edge style, REV Wheels offers a full portfolio—including their 107 Classic Rally Series silver wheels (available in 5 and 6-lug bolt patterns.) They'll amp up your ride's aesthetics with some old-school charm in a classic 5-slot design that is sure to look great on both old and new rides! These sleek wheels deliver timeless style and classy appeal, making them a stellar replacement for those generic factory rims. Choose from a variety of configurations to complement your vehicle and turn more heads wherever you drive with the stylish REV Wheels 100 Classic Series polished rims designed to fit your application! More product features include: * Silver center with a machined lip that looks like a trim ring * Larger sizes for improved appearance and to fit modern tires * Clear-coated finish for improved durability and easy cleaning * All original factory GM cap styles (available separately) fit the 107 * Looks great with Derby, Police, or Disc Brake center caps (sold separately)
( 5 )
$204.95
—
$245.95
$184.45
—
$221.35
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster