Availability
Showing In Stock Items. Show All 29 Items.
Summit Racing™ engine stand adapters are a better way to mount your engine block to your stand. Built from billet aluminum, these plates eliminate the adjustable arms and use all of the available bellhousing bolt holes. The result is a more rigid, secure mount that will eliminate most of the sagging that occurs as you add more weight to the engine assembly.
( 4 )
$109.99
The right equipment can make your projects simpler and more enjoyable. Allstar Performance heavy-duty engine cradles will store, transport, and allow you to work more conveniently on your engines. Manufactured from 14-gauge, 1 in. square tubing, these cradles are given a black powdercoat finish to ward off rust and corrosion. The cradles include Grade 5 fasteners and a provision for mounting wheels (not included) with 1/2 in. studs. Your project's finished? Simply disassemble and store the cradles to free up floor space in your garage or shop. Allstar cradles are available for specific engine types, including LS, GM, Mopar, Ford, Chrysler, Dodge, Hemi, Jeep, Oldsmobile, and Pontiac. Order the model that best suits your application.
( 124 )
$116.99
—
$126.99
Removing valve springs means working within a small space--a place where some tools are incapable of reaching. COMP Cams valve spring compressors enable you for effortless removal in these areas. Their tools allow you to work with either one or two valve springs at a time, without the hassle of first having to remove the rocker stand or any of the other installed rocker arms. They can be used on all GM Gen III/IV LS-type engines, as well as, small block Chevy and Ford engines with the cylinder heads on or off. A simple design with big time-saving results; choose the completely capable COMP Cams valve spring compressors for hassle-free removal.
( 85 )
$154.95
Summit Racing Equipment's® patented EZ pushrod length checkers make finding correct pushrod length a snap ... literally! Simply loosen the set screw, tighten the rocker, tighten the set screw, and remove the rocker. The pushrod is then at zero lash. Measure with a dial caliper and add the amount of required lifter plunger preload to get the perfect pushrod length. You'll attain accurate, consistent measurements--and no more counting rocker bolt turns! These stainless steel tools are a must for short travel lifters, and a Master Kit is available for professional engine builders. Order the lengths needed for your applications.
( 10 )
$149.99
Using ICT Billet Engine Saver stand adapters mean never having to worry about your valuable engine falling off the stand and being damaged. These 1/2 in. thick heavy-duty plates are made from aerospace-grade billet aluminum, and will greatly increase the clamping strength of your engine stand by using all bellhousing bolts and by lowering engine in stand mounting points. Engine Saver adapter plates will fit most engine stand slot bolt patterns and can be drilled to accommodate other stands. ICT Billet Engine Saver stand adapters include plate, spacers, and mounting hardware.
( 33 )
$160.99
Summit Racing™ engine lift plates allow you to lift your engine up by its intake manifold for easier maneuvering. You can also use them as manifold covers when you store your engine.
( 7 )
$115.99
These SPC Performance sleeve pullers are designed to remove rusted or seized bushings. They have been specially manufactured to work with offset or angled bushings and their single-head style eliminates breaking the ears off of the sleeve. Available for most 4-wheel drive trucks, these SPC Performance sleeve pullers will help you with your vehicle's alignment.
( 1 )
$124.99
You know what a chore it can be to remove high-pressure valve springs with shaft mounted rocker arms. Remove and install valve springs the safe and correct way with COMP Cams shaft mount valve spring compressors. They are designed to facilitate valve spring removal on heads with shaft mounted rockers while the cylinder heads are still on the engine.
( 24 )
$159.95
—
$211.95
Test your cooling system's pressure with these accurate testers from MotoRad. These testers will test today's higher pressure cooling systems and pressure caps up to 30 lbs. The gauges test pressure ranges of 17 to 19 lbs., 20 lbs., and 28 to 30 lbs., with a color-coded dial that makes it simple to accurately test higher pressure caps and systems. A pressure release bar releases pressure buildup before removing the head from the neck. These MotoRad cooling system pressure testers come in a plastic carrying case with an easy-to-use instruction manual.
( 2 )
$111.99
Store, transport, and work on your engine with Allstar engine cradles. They are manufactured from 14-gauge, 1 in. square tubing and are coated with a black powdercoating to guard against corrosion and rust. The cradles include Grade 5 fasteners. When you're done, these cradles easily disassemble for storage, saving you valuable floor space for other projects. Working on your engine is easier with Allstar engine cradles.
( 44 )
$103.99
—
$109.99
Innova OBD1 kits offer compatibility with all their OBD2 code readers featuring removable cables in both the CarScan and FixAssist lines of tools. With these sets, you can perform tests like KOEO, KOER, timing check, cylinder balance, output state, wiggle, and more. As a leading supplier of test equipment and diagnostic reporting for the automotive aftermarket, Innova Electronic Corporation offers high-quality products, innovative diagnostics, and value to their customers with products like their OBD1 kits. OBD1 adapters included with the kit: * General Motors (1982-93 and some 1994-95 models) * Ford, Lincoln, Mercury (1983-95 models with EEC-IV systems) * Toyota, Lexus (1991-95) * Chrysler, Dodge, Plymouth (1984-95) * Jeep (1993-95) * Honda
( 4 )
$105.99
Moroso degree wheel crankshaft sockets easily turn over your engine and degree-in the camshaft. These sockets have a 1/2 in. drive and make it easier to locate TDC and BDC. They feature a knurled jam nut that is used to position a degree wheel, and can be loosened and turned separately from the socket. A broached keyway allows the socket to slide over the crankshaft snout for positive engagement.
( 8 )
$103.99
—
$104.99
RideTech AirPod covers keep your system under cover and your trunk looking good. These heavy-duty covers provide a professional, aesthetic look for your 3 or 5-gallon RideTech AirPod compressor. The covers are easy to install for a clean, sleek appearance.
( 1 )
$155.00
—
$165.00
Performance Tool spindle nut wrench sets come with everything you need to make quick work of stubborn spindle nuts. They feature vanadium steel and black oxide sockets that fit most 2WD and 4WD light truck applications.
( 1 )
$119.99
Make easy work of tightening, loosening, or removing spindle nuts on most SUV or light truck applications with these spindle socket nut sets from OTC. These OTC 4-wheel drive spindle nut socket sets include several socket sizes that are used on most of today's spindle nut applications. All of the sockets included in these sets are finely crafted from strong chrome vanadium steel. They have a 1/2 in. square drive to allow for the use of a torque wrench, ratchet, or breaker bar.
( 2 )
$149.99
Yukon Gear & Axle inner axle side seal installation tools ease the frustration of getting your axle seals aligned properly. Having the right tools makes any job easier, and not having them can make the job miserable, if not downright impossible! These specially designed tools are simple to use. So, un-complicate the installation of new seals on your Dana axles with the right tools--Yukon Gear & Axle inner axle side seal installation tools.
( 9 )
$221.99
Antigravity Batteries Re-Start batteries have built-in jump-start and full management systems. They intelligently monitor their own voltage, and just before going completely dead, they promptly initiate sleep mode with just enough energy to get your vehicle started again. Simply press the restart button located on the battery, start your vehicle and drive away. These are extremely lightweight and high-power lithium-ion replacements for your heavy lead/acid batteries. They're available for most modern motorcycles and ATV/UTVs. No more dead battery emergencies or being stranded with Antigravity Batteries Re-Start batteries! Features and specs: * Up to 2 times the cranking power and lifecycle of heavy lead/acid batteries * Up to 70 percent lighter than heavy lead/acid batteries * Management system offers low-voltage cutoff, over-charge/over-discharge protection, lithium cell balancing, and thermal protection * 4 terminal posts for ease of use with right or left side connections and any orientation (no liquids to spill) * Capable of holding a charge for up to one year when no parasitic drains (alarms, GPS, etc.) are present * Shock and vibration resistant for durability * No acids or heavy metals for lower environmental impact
( 13 )
$249.99
Yukon Gear & Axle differential bearing preload tools, spanner wrench, and side adjusters are all constructed from high-quality materials and have simplistic designs to make your life easier when you're working on multiple different vehicle applications. Whether you're looking for bearings, differentials, or side adjustment, Yukon Gear and Axle has you covered.
( 9 )
$141.99
—
$172.99
Removing the doors from your Jeep or Bronco on a nice day is an awesome way to go off-roading, run around town, or down to the park or beach. But safely storing those doors is not the easiest thing to do. Putting them on the floor can lead to paint or moisture damage, and leaning them against each other can harm them as well. Summit Racing™ Door storage hangers allow you to hang your doors up off of the ground at the height of your preference. Each hanger safely holds a pair of doors by the hinges as if mounted on the vehicle. They need to be mounted to wall studs on 16 in. centers for a solid, secure mount. When it comes to your doors, keep them looking nice and hang them around with Summit Racing door storage hangers.
( 7 )
$119.99
Yukon Gear & Axle setup bearings easily slip on and off the pinion journal to allow for pinion depth adjustment. These setup bearings ensure you have the proper tolerances needed and are a great addition to your toolbox!
( 3 )
$121.99
—
$164.99
Altronics DIGICAM digital degree system is one of the easiest, most accurate ways to degree your camshaft. Altronics DIGICAM crank socket inserts are required for use with the DIGICAM and cover most popular Chevrolet (including LS1), Ford, Pontiac, Mopar, and Oldsmobile engines. They even offer a 6-piece set that's perfect for shops or individuals that rebuild multiple engine types.
Not Yet Reviewed
$149.99
There are many steps in setting up a new ring and pinion, and none should be taken lightly. When it's time to set up the pinion preload, you'll appreciate the assistance of Yukon Gear & Axle pinion yoke holders. These specialty tools firmly hold the yokes in place and are compatible with almost all differentials. Yukon Gear & Axle pinion yoke holders make setting pinion preload settings a much easier process.
( 2 )
$174.99
Jesel has the timing belt drive replacement components to keep your systems in optimum operation. Bronze thrust washers, shims, bolts, and more are available.
( 1 )
$172.00
Clearance
Yukon Gear & Axle differential carrier bearings are low-cost replacements for Positraction or locker upgrades. They bearings are made of steel and most include races and shims. Order the kit recommended for your axle application.
( 18 )
$194.99
$103.50
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
