Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
1982 FORD MUSTANG Parts and Accessories
Showing In Stock Items. Show All 90 Items.
On Sale
MSD 8.5mm Super Conductor Spark Plug Wire Sets
MSD 8.5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per foot—but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft. of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference "choke." This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD's 8.5mm Super Conductor wire sets are available in custom or universal-fit applications, assembled or not, with a variety of terminal and boot end options.
( 1992 )
$143.95
—
$176.95
$129.55
—
$159.25
On Sale
Holley Retrofit Engine Oil Pans for GM LS Engines
Holley retrofit engine oil pans for GM LS engines are designed to install an LS engine in a variety of GM muscle car and truck chassis. They provide OEM fitment, OEM oil filter mounting, OEM oil cooler port provision, OEM engine NVH suppression, OEM flange gasket and sealing, proper structural rigidity, and OEM bellhousing attachments. The oil pans are manufactured from traditional high-quality cast aluminum and include a sump baffle, oil pump pickup tube, sump plug, oil filter stud, and oil passage cover.
( 249 )
$449.95
—
$526.95
$403.95
—
$473.95
On Sale
MSD Pro-Billet Ready-to-Run Distributors
MSD Pro-Billet Ready-to-Run distributors are the perfect upgrade for weak OE electronic distributors, outdated points distributors, and large HEIs or DuraSparks. All that's required is to install the distributor in the engine, and connect three wires and the coil! A maintenance-free magnetic pickup accurately triggers this ignition with increased output from the amplifier, easily outperforming stock ignitions. It will smooth out the engine's idle, improve starting, and perform at a much higher rpm. The housing is machined from billet 6061-T6 aluminum, using state-of-the-art CNC mills and lathes for a unit with no porosity or weak areas. For stability and endurance, an oversized steel shaft spins in a top-mounted sealed ball bearing, while an extra-long sintered bushing guides the shaft at the base of the housing. This shaft also receives a QPQ coating for low friction wear and resistance against corrosion from humidity and ozone buildup. The distributors feature MSD's adjustable mechanical advance, which allows you to custom-tailor an ignition curve to match your engine's needs. Most models are also available with a vacuum advance canister to help improve economy. Order the model recommended for your vehicle and engine application.
( 330 )
$635.95
—
$716.95
$571.95
—
$644.95
On Sale
MSD Street Fire Spark Plug Wire Sets
MSD Street Fire spark plug wire sets deliver high performance at value prices. The wires feature 500 ohms per foot of resistance for improved spark delivery and power, with a helically wound conductor that suppresses EMI. They're also built to last and feature 8mm silicone and synthetic jackets to resist heat and abrasion, silicone boots to protect against high exhaust temperatures, and an Aramid core to provide great strength and durability. A crimping tool is included with universal sets.
( 439 )
$70.75
—
$80.85
$63.68
—
$72.77
On Sale
ACCEL Performance Spark Plugs
ACCEL performance spark plugs produce a larger spark for more power at high rpms. They improve throttle response and fuel economy and reduce fouling. Their purified Alumina insulator prevents arcing, and their machine-rolled threads protect heads.
( 290 )
$41.22
—
$58.95
$37.10
—
$53.06
On Sale
MSD Pro-Billet Distributors
MSD Pro-Billet distributors share the same CNC machining techniques as the rest of the MSD distributor line. They feature a housing that's machined from high-quality 6061-T6 aluminum for durability and show-quality looks. Their oversized shaft receives a QPQ coating for friction reduction and corrosion resistance, with the added strength of two sealed ball bearings that guide the shaft accurately at well over 10,000 rpm. An extra-long sintered bushing replaces the ball bearing at the bottom of Chevrolet models. TIG-welded on top of the polished steel shaft is MSD's accurate mechanical advance assembly. The weights are supported by nylon pads that allow the advance to operate smoothly throughout the rpm range. For all-out racing, the advance mechanism can also be easily locked out. To accurately trigger the ignition, a high-output magnetic pickup is bolted to the base. This pickup produces a precise trigger signal that will never vary more than one degree at any rpm. A durable gear is installed for performance applications, and an MSD red cap with brass terminals and race rotor is supplied. They're available in standard and small diameter models for applications with limited clearance, and require the use of a separate ignition box such as an MSD 6, 7, 8, or 10 Series ignition.
( 407 )
$449.95
—
$614.95
$403.95
—
$552.95
On Sale
Holley EFI Dual-Sync Distributors
Precise timing control—Holley EFI dual-sync distributors are built with two Hall effect sensors for crankshaft and camshaft signals. The distributors can be used as just a crankshaft speed input or provide a camshaft sync signal for sequential fueling operation. They're also useful for crank and cam signals when running coil-on-plug applications. Dozens of models are available; order the one recommended for your vehicle/engine application. Some features of Holley EFI dual-sync distributors include: * CNC-machined billet aluminum housings with integrated LEDs for easy setup * Hardened steel distributor gear * Precision-machined shutter wheels that ensure accurate timing—even at very high RPM * Designed to be plug-and-play with Holley systems, but may be used with other EFI systems that support Hall effect crankshaft and camshaft sensors * Housings are available in a variety of finishes
( 37 )
$511.95
—
$589.95
$459.95
—
$529.95
On Sale
MSD Pro-Billet Street Distributors
MSD Pro-Billet Street distributors are a popular choice for those who desire race-proven performance for their street machine. A vacuum advance canister provides improved economy, and the proven MSD mechanical advance mechanism allows you to dial in a timing curve to fit your needs. As always, an advance kit of springs and stop bushings is included. The housing features an all-billet 6061-T6 aluminum design for accuracy to within .001 in. An oversized steel shaft is QPQ-coated for low friction, and rides in sealed ball bearings at the top and bottom of the distributor. An extra-long sintered bushing replaces the ball bearing at the bottom for Chevrolet models. This combination keeps the shaft steady, creating accurate spark delivery at any rpm. They rely on a magnetic pickup to trigger the MSD ignition control, which delivers the powerful sparks to the coil. This pickup is extremely accurate and never needs adjusting. Pro-Billet Street distributors require the use of a separate ignition box, such as an MSD 6, 7, 8, or 10 Series ignition. Order the model recommended for your vehicle and engine application.
( 115 )
$562.95
$505.95
On Sale
MSD Replacement Distributor Caps
Ensure that you have the finest distributor cap available by using one of these MSD replacement distributor caps. They're designed with performance in mind, are molded from a high-quality, voltage-insulating material, and use low-resistance terminals for maximum conductivity .
( 197 )
$58.95
—
$68.35
$53.06
—
$61.52
On Sale
MSD Steel Distributor Gears
MSD's high-grade steel distributor gears are burnished for a smooth, scuff-free finish, and are machined for precise gear mesh. Excessive clearance causes timing fluctuation throughout the rpm range, resulting in lost horsepower, so MSD also designed these gears for tighter mesh between the camshaft and distributor drive gears.
( 33 )
$145.95
$131.35
On Sale
Mr. Gasket High Performance Thermostats
Mr. Gasket high-performance thermostats are designed to resist large variations in coolant pressures that can occur at high rpms. Under these conditions, coolant temperature and pressure fight for control of the thermostat, keeping it from opening at its designed temperature. These balanced high-performance thermostats have brass-and-copper construction, and open at the right temperature regardless of engine rpm.
( 236 )
$29.11
—
$32.25
$22.38
—
$29.03
On Sale
MSD Distributor Cap and Rotor Kits
The cap and rotor of any ignition system must be considered maintenance items. Just like when you change the oil and filter in your car, you should always replace your cap and rotor as a set. MSD makes it easy with these cap and rotor replacement kits. The correct rotor is already matched to the correct cap for you.
( 518 )
$67.39
$60.65
On Sale
Summit Racing™ Manual Rack and Pinions
Summit Racing™ Racing manual rack and pinions have stock mounting locations, a chromed center tube and a polished housing.
( 34 )
$337.99
—
$479.99
$304.19
—
$431.99
On Sale
Flowmaster Super 44 Series Mufflers
Flowmaster Super 44 Series mufflers use the same technology as the original Super 40 mufflers—but also offer some distinct advantages. The Super 44s deliver a deep, rich tone with an improved flow path radius, optimum internal flow, and sound control engineering, all created with Delta Flow technology. They're the most aggressive, deepest sounding, highest performing 4 in. case street mufflers that Flowmaster has ever built. These American-made, all-black mufflers exceed OEM specifications for use on street cars, race cars, and sport trucks. Super 44s are ideal when dynamic sound, torque, and horsepower improvements are demanded in a smaller high performance muffler. Their maximum performance and improved flow path will generate more torque and power than ever before! If you really want to hear your exhaust system inside as well as outside of your vehicle, then order the Flowmaster Super 44 muffler best suited to fit your application.
( 400 )
$137.95
$124.15
On Sale
Holley Mechanical Fuel Pumps
Holley Street Performance mechanical fuel pumps are designed to work with stock or mildly modified engines. Ranging in performance styles of 80 to 225 gph, their body castings can be rotated 360 degrees to ease mounting in difficult places and they have large orifices for high flow rates. These pumps are not compatible with methanol or alcohol fuels and should not be used with fuel injection systems. A fuel pressure regulator is required for 130 gph versions.
( 358 )
$139.95
—
$185.95
$125.95
—
$167.35
On Sale
Pypes Street-Legal X-Pipes
Free-flowing, mandrel-bent Pypes Street Legal X-pipes have reinforcing plates at critical locations and are available in 409 stainless steel or polished 304 stainless steel for years of high-powered performance. Since V8s fire unevenly, exhaust exits in pulses rather than in a steady flow. While one pipe is filled with pressure, the other pipe is relatively pressureless, but the connecting of the two pipes in a siamese pattern allows pressure to be released to the other side. This action allows the exhaust to pass through the pipe more quickly and the improved 'breathing' increases horsepower. Their high-quality, exceptionally versatile design and performance are a proven winner when it comes to bumping up the horsepower of your daily driver or race car. There's no skimping on materials here. All crossovers include dual 409 stainless reinforcement plates at the welds, where they are needed the most. All pipes are mandrel-bent, allowing for the maximum flow of exhaust gasses, which boosts acceleration. Fabricated using the highest quality materials, the smooth, seam-coated, mandrel-bent, 409 stainless steel pipe resists corrosion and extends the life of your system. They include the X-pipe with extended legs, cutout covers, cover hardware, and installation hardware.
( 7 )
$830.79
$747.71
On Sale
Summit Racing™ Sport Seat Combos
We understand that it doesn't matter whether you're cruising or racing--a comfortable set of seats is a must-have for any vehicle. These Summit Racing™ sport seat combos include two Summit Racing™ sport seats, two Scat seat mounting brackets, and two Summit Racing™ bracket adapters. With adjustable sliders, lumbar and shoulder supports, cutouts for safety harnesses, and recline and tilt forward mechanisms, these Summit Racing™ sport seat combos offer perfect adjustability and comfort for any road or track vehicle.
( 26 )
$751.94
$651.94
On Sale
ACCEL SuperStock 4000 Series Spark Plug Wire Sets
ACCEL SuperStock 4000 Series spark plug wire sets will upgrade your OE ignition system for high-spark delivery levels and RFI suppression. They extrude the silicone jacket over a tightly woven, rugged fiberglass braid that meets or exceeds OE specifications. ACCEL offers their SuperStock 4000 Series wire sets in various color schemes to match nearly any application! More product features include: * Jackets rated up to 450 degrees F * 7mm or 8mm yellow, red, black, and blue silicone jackets * Orange and other color-matched spark plug boots with terminals * Available for pre and post-HEI vehicles * Custom-fit, universal, and import
( 138 )
$68.99
—
$73.55
$53.06
—
$66.20
On Sale
Weiand Oil Pan Packages
Weiand oil pan packages were clearly visible on those old gassers, getting them down the track with speed and consistency. The oil pan features trap door baffles to help keep oil under control during hard acceleration, as well as increased oil capacity to keep high performance engine oil systems fed properly. Choose from among dozens of Weiand oil pan packages—a great option for drag race, road race, and circle track applications.
( 108 )
$306.95
—
$339.95
$276.25
—
$305.95
On Sale
RAM Hydraulic Release Bearings
RAM hydraulic release bearings offer maximum flexibility when setting up the clutch release system in your early or late model car or truck. RAM heavy-duty hydraulic bearings use larger, more robust O-rings, providing the ultimate in durability and long life when compared to factory and other aftermarket hydraulic systems. RAM hydraulic bearings are fully adjustable and are easy to set up with most aftermarket clutches, single or dual disc. RAM hydraulic bearings are also a great choice for use in your Tremec transmission conversion. Application specific bearing kits include every fitting, line, shim and adapter needed to connect directly to the factory master cylinder. RAM also offers other bearing styles with a wider 3.150 in. bearing face needed for 3 and 6 lever clutch applications. When only the best will do, choose RAM!
( 76 )
$255.00
$229.50
On Sale
Summit Racing™ Drag Shocks and Struts
Summit Racing™ offers drag race shocks and struts for countless vehicles from the 1950s and up. They're available in a variety of styles for front and rear applications—including 90/10, 70/30, and 50/50. A 70/30 strut extends faster than it contracts, meaning faster front-end lift but longer to settle back down. 90/10's will lift your front-end very fast and settle it back down slowly, keeping the weight transferred to the rear tires much longer than the 50/50 models. Order the drag shocks and struts recommended for your racer.
( 12 )
$62.99
—
$140.99
$56.69
—
$126.89
On Sale
MSD Bronze Distributor Gears
high-quality MSD bronze distributor gears are machined from quality AMPCO 45 aluminum bronze containing 5% nickel. This material creates high strength gear teeth which are less prone to wear when used with high volume oil pumps but does not harm the cam like steel or iron gears. With the proper cam and gear combination you'll be sure to have flawless, extended performance in the harshest conditions.
( 93 )
$93.15
$83.84
On Sale
Summit Racing™ Rear Control Arms
Summit Racing™ rear control arms were designed with performance in mind. They help to eliminate flex and control wheel hop, and they're fully adjustable for pinion angles, which greatly improves traction. Made from heavy-duty steel with a durable finish, the Summit Racing™ control arms include all necessary hardware for installation.
( 52 )
$189.99
—
$200.99
$170.99
—
$180.89
On Sale
RAM Premium Replacement Clutch Kits
RAM premium replacement clutch kits are the first choice of professional installers, because each set contains the correct replacement parts to ensure proper fit and operation in your vehicle. Kits include an OEM diaphragm or lever style pressure plate, clutch disc, and a clutch-alignment tool. Some clutch sets will include a throwout bearing. The clutch disc features either a 5- or 6-spring standard hub or helix hub, just like the originals. These clutch sets are great for unmodified street vehicles and restorations. The flywheel must be resurfaced or replaced prior to installation to validate the warranty. RAM clutch kits are available in more than a hundred models for fitment on thousands of vehicle-specific applications.
( 93 )
$229.00
—
$529.00
$206.10
—
$476.10
