Availability
Showing In Stock Items. Show All 141 Items.
Holley retrofit engine oil pans for GM LS engines are designed to install an LS engine in a variety of GM muscle car and truck chassis. They provide OEM fitment, OEM oil filter mounting, OEM oil cooler port provision, OEM engine NVH suppression, OEM flange gasket and sealing, proper structural rigidity, and OEM bellhousing attachments. The oil pans are manufactured from traditional high-quality cast aluminum and include a sump baffle, oil pump pickup tube, sump plug, oil filter stud, and oil passage cover.
( 249 )
$511.95
—
$526.95
MSD Pro-Billet Ready-to-Run distributors are the perfect upgrade for weak OE electronic distributors, outdated points distributors, and large HEIs or DuraSparks. All that's required is to install the distributor in the engine, and connect three wires and the coil! A maintenance-free magnetic pickup accurately triggers this ignition with increased output from the amplifier, easily outperforming stock ignitions. It will smooth out the engine's idle, improve starting, and perform at a much higher rpm. The housing is machined from billet 6061-T6 aluminum, using state-of-the-art CNC mills and lathes for a unit with no porosity or weak areas. For stability and endurance, an oversized steel shaft spins in a top-mounted sealed ball bearing, while an extra-long sintered bushing guides the shaft at the base of the housing. This shaft also receives a QPQ coating for low friction wear and resistance against corrosion from humidity and ozone buildup. The distributors feature MSD's adjustable mechanical advance, which allows you to custom-tailor an ignition curve to match your engine's needs. Most models are also available with a vacuum advance canister to help improve economy. Order the model recommended for your vehicle and engine application.
( 329 )
$635.95
—
$716.95
On Sale
Precise timing control—Holley EFI dual-sync distributors are built with two Hall effect sensors for crankshaft and camshaft signals. The distributors can be used as just a crankshaft speed input or provide a camshaft sync signal for sequential fueling operation. They're also useful for crank and cam signals when running coil-on-plug applications. Dozens of models are available; order the one recommended for your vehicle/engine application. Some features of Holley EFI dual-sync distributors include: * CNC-machined billet aluminum housings with integrated LEDs for easy setup * Hardened steel distributor gear * Precision-machined shutter wheels that ensure accurate timing—even at very high RPM * Designed to be plug-and-play with Holley systems, but may be used with other EFI systems that support Hall effect crankshaft and camshaft sensors * Housings are available in a variety of finishes
( 37 )
$511.95
—
$589.95
Detroit Speed mini-tubs are inner wheel housings designed to accommodate wider tire and wheel packages. They are designed for a perfect fit and to retain a stock appearance. The tubs are nearly 3 in. wider than stock and offer you excellent additional clearance for those larger tire and wheel combinations. The Detroit Speed mini-tubs are stamped from 18-gauge steel. By adding these tubs, you'll significantly reduce the number of hours required for a mini-tub project.
( 7 )
$525.95
Centerforce dual friction clutches generate up to a 90 percent increase in holding capacity over stock systems. These clutch-and-disc sets are designed for engines producing high horsepower and big torque outputs. Perfect for 4WD vehicles, all Centerforce clutch systems provide smooth engagement and light pedal pressure without compromising high performance.
( 307 )
$556.95
—
$629.95
MSD Pro-Billet Street distributors are a popular choice for those who desire race-proven performance for their street machine. A vacuum advance canister provides improved economy, and the proven MSD mechanical advance mechanism allows you to dial in a timing curve to fit your needs. As always, an advance kit of springs and stop bushings is included. The housing features an all-billet 6061-T6 aluminum design for accuracy to within .001 in. An oversized steel shaft is QPQ-coated for low friction, and rides in sealed ball bearings at the top and bottom of the distributor. An extra-long sintered bushing replaces the ball bearing at the bottom for Chevrolet models. This combination keeps the shaft steady, creating accurate spark delivery at any rpm. They rely on a magnetic pickup to trigger the MSD ignition control, which delivers the powerful sparks to the coil. This pickup is extremely accurate and never needs adjusting. Pro-Billet Street distributors require the use of a separate ignition box, such as an MSD 6, 7, 8, or 10 Series ignition. Order the model recommended for your vehicle and engine application.
( 115 )
$562.95
QA1 Proma Star externally adjustable coilover shocks and struts provide just the right combination of consistency, reaction, and durability for drag racing. They have special valving, which is designed to compensate for high shaft speed, while allowing for low shaft speed control. When combined with the 18 externally adjustable valve settings, they ensure an improved grip on the track from end to end. Other features include a bright-anodized aluminum body, PTFE-lined bearings or polyurethane bushings, a 5/8 in. centerless-ground chrome piston rod, and aerospace-caliber sealing materials.
( 179 )
$589.95
McLeod hydraulic throwout bearing conversions are designed to convert your vehicle over to hydraulic power. They produce a softer pedal effort, giving you more manageable and smoother clutch operation. Also included are stainless steel braided hoses, steel fittings, an aluminum slave cylinder and a remote reservoir. The McLeod hydraulic throwout bearing conversions use your stock pedal and are easy to install and adjust.
( 14 )
$635.00
These Meziere True Start 400 series high-torque starters are recommended for all high-compression, large displacement engines up to 700 cubic inches and supercharged applications. They feature custom gear reduction for the best cranking power and rotational speed. Their innovative billet aluminum head design provides the strongest drive gear support without an external nose support. The starter block features a full 360 degrees of clocking positions in 10 degree increments. Meziere True Start 400 Series high-torque starters feature an offset design that clears all kickout style oil pans.
( 17 )
$679.06
RideTech RidePro-HP Ride Height sensor kits upgrade your existing RidePro E5 pressure-based system. They work together to deliver the ultimate air suspension management systems measuring both pressure and ride height accurately. With the addition of RidePro-HP, ride height and spring balance (loads) are established by comparing the position of the ride height sensor to the air pressure within each air spring. Your car is leveled with no cross loading, which is especially important for dynamic driving scenarios where quick transitions occur, such as high performance driving, sudden directional changes, and panic stops. RideTech complete RidePro-HP kits include and feature: * Four ride height sensors * Four ride height sensor linkage kits * Group harness * 1/4 in. sensor bolts with Nyloc nuts and flat washers * Mounting tabs, heat shrink tubes, and installation guide * Easy installation * Heavy-duty ride height sensors * Bendable linkage rods with rubberized rod ends * Weatherproof connectors and wiring harnesses
( 1 )
$525.00
Yukon Gear & Axle Dura Grip positraction carriers offer great traction and strength, and yet are not overly aggressive for the streets. These nodular iron or steel replacements are 4-spring, Raybestos composite, clutch-style, limited-slip carriers—with internal gears machined from forged 4320 steel with stronger teeth. Assembled in the USA, the Yukon differential carriers are rebuildable, allowing for repairs or modifications without buying a new unit. They're available for fitment with nearly two dozen axle models. What are you using to transfer power? Choose smooth operation with strong lockup abilities to transfer torque—benchmarks of the Yukon Gear & Axle Dura Grip positraction carriers.
( 138 )
$572.99
On Sale
Flowtech headers are designed to provide optimum exhaust flow for increased horsepower, torque, fuel economy, and improved throttle response. Leak-tested for maximum performance, they feature the industry's best welds for durability and are carefully engineered for precise fit. Available for a wide range of applications, they're offered in block hugger, competition, fenderwell, lakester, long tube, mid-length, shorty, upright, and turbo styles. Varying with the application, Flowtech headers are constructed from sturdy and lightweight cold-rolled mild steel or stainless steel for increased strength and durability. All tubing is mandrel-bent to provide consistent tubing diameter for smooth flow and increased exhaust velocity. Extra-thick, machined header flanges provide a leak-free seal and maximum strength. For long-term rust and corrosion-resistance, available finishes include natural and polished stainless steel, high heat-resistant black paint, or a satin silver metallic ceramic thermal barrier coating. All mounting hardware and premium gaskets are included. Important notes: Breaking in an engine with ceramic coated headers WILL result in damage to the coating and will VOID all warranties. Ceramic coated headers require several heat cycles to fully cure before they will withstand extreme heat. Hooker recommends using cast iron exhaust manifolds or old headers to break in new engines to avoid coating damage. Flowtech does not recommend the use of header wraps as this will void the warranty.
( 995 )
$538.95
Moroso drag race oil pans are available for hundreds of vehicle-specific applications. The sizes and configurations are built for easy installation and optimum performance. Our selection includes a variety of styles, materials, and fluid capacities for drag racing, street and strip, and road race usage. Order the replacement model designed for your ride.
( 58 )
$700.99
—
$726.99
A higher-than-stock stall speed as delivered by these B&M Holeshot converters will provide several advantages and benefits to vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low-end power and torque. These high-stall converters allow the engine to launch the car at higher rpm, where more torque is available. They're a very good choice for the typical street machine that is looking for better launch capability and more strength.
( 83 )
$540.95
Hays Twister 3/4 Race performance torque converters are designed to be the perfect solution for your street/strip machine. Hays designed the Twister torque converters to be one step short of being a "Full Race" converter giving you the perfect combination of performance and affordability. Every torque converter is hand built, inspected and tested to ensure they meet the top of the line quality you expect. To ensure consistency and improve performance each converter is built for one transmission with one bolt pattern, meaning a lighter converter to maximize performance. High flow stators promote better cooling and heavy duty Torrington bearings are used to increase strength and durability. Not ready to go a "Full Race" converter, Hays is there for you with their Twister 3/4 Race torque converters.
( 11 )
$529.95
—
$665.95
Optic Armor drop-in blackout windows are highly scratch- and chemical-resistant, while being 50 to 75 percent lighter than glass. Made from high optical-grade polycarbonate that's virtually shatterproof, they provide added durability as well as safety for the driver. Optic Armor blackout windows are available in a variety of thicknesses, tints, and borders. All windows feature a clear portion for easy reading of vehicle identification numbers. Optic armor drop-in windows are direct-fit for easy installation and come ready to fasten or glue-in to factory bodies. Available for a variety of makes and models from the 1960s and up, they can be cleaned with standard glass cleaner. Drop-in black out windows are designed for both street/strip cars as well as the professional chassis shop. No more cutting, sanding, and painting. Features include: * Formed to factory curvature * Pre-cut to factory glass dimensions * Designed to utilize factory trim molding * Optic Armor hard coating inside and out * Factory-style perimeter blackout featuring VIN window for a factory/sleeper look * Bondable perimeter allows windows to be glued in utilizing Optic Armor's recommended adhesive * Available for rear or front windshield
( 15 )
$595.00
—
$670.00
Milodon Pro Touring oil pans are designed to provide an adequate oil supply during the rapid acceleration, hard deceleration, and violent turns common to motorsports. The replacement pans are available in dozens of sizes, configurations, and options. Order the model recommended for your vehicle.
( 44 )
$559.95
QA1 Ford Mustang control arms are an easy-to-install solution for increased strength and reduced front-end weight. Saving over 15 lbs. per set, these control arms are an ideal solution for your Mustang. Offered in two configurations, QA1 Ford Mustang control arms are optimized for your intended use. Choose the street or race-style arms designed for your Mustang. * Street: -- QA1 Street control arms are engineered for performance. Great on vehicles primarily used for cruising and the street. They use a factory replacement ball joint for serviceability and polyurethane bushings for a smooth ride and reduced suspension bind. * Race: -- QA1 Race control arms are designed for drag racing, pro-touring, and autocross applications. They're equipped with QA1's exclusive X-Series chromoly rod ends and low-friction ball joints, giving you a wide range of wheel alignment settings while reducing friction.
( 23 )
$589.95
Complete your suspension upgrade with Eibach anti-roll sway bar kits. They reduce body roll over stock bars through increased design stiffness. The result is better handling and cornering grip in any performance-driving situation. Eibach sway bars are manufactured from cold-formed steel alloy for precision performance, and finished with a long-lasting red powdercoat. Order the Eibach anti-roll kit designed to fit your application. Product features: * Depending on application, some kits come complete with all mounting hardware, while others may require separate mounting kits * Unimpaired spring comfort at bilateral spring deflection * Decreasing the load difference between the wheels inside and outside the curve * Impacting the under- or over-steering tendency positively (auto-steering behavior)
( 72 )
$540.00
Centerforce II clutch kits provide up to a 60 percent increase in holding capacity over stock systems. Their clutch-and-disc sets are recommended for mildly modified vehicles used for street and strip type applications. These units are also very capable for 4WD and off-road use, heavy-duty towing, and commercial applications.
( 47 )
$535.95
—
$556.95
You have asked, and Baer has answered! Baer is bringing back the original Baer Claw brake system that started it all, with the introduction of their Classic Series disc brake kits. They are direct bolt-ons for early GM, Ford, and Mopar applications. Front kits feature aluminum 2-piston, pad-guided calipers and vented 11 in. rotors, while the rear kits feature cast iron single-piston calipers and solid 10.5 in. rotors for maximum clearance on small wheel applications. You want to modernize your early muscle car, fit stock wheels, have easy access to replacement parts, and not break the bank. Baer Classic Series brake kits are your answer! Features include: * Red powdercoated calipers * Braided brake hoses * Slotted and drilled rotors
( 37 )
$665.95
Swap out your factory fan clutch, fan, and shroud with a Cool Pack dual fan assembly from Perma-Cool to increase your engine's horsepower and torque output. Perma-Cool uses a combination of dual high-output electric fans and a 170 to 210 degree F adjustable thermal sensor to provide efficient cooling in any situation. They're made from aluminum and incorporate laser-cut fan openings and airflow enhancers to promote the proper amount of airflow. A special black powdercoat finish keeps them looking good. Best of all, Cool Packs use the OEM mounting holes and require no cutting or drilling to install. Order the fan size and CFM range preferred for your application.
( 20 )
$629.98
On Sale
MSD Pro-Billet distributors share the same CNC machining techniques as the rest of the MSD distributor line. They feature a housing that's machined from high-quality 6061-T6 aluminum for durability and show-quality looks. Their oversized shaft receives a QPQ coating for friction reduction and corrosion resistance, with the added strength of two sealed ball bearings that guide the shaft accurately at well over 10,000 rpm. An extra-long sintered bushing replaces the ball bearing at the bottom of Chevrolet models. TIG-welded on top of the polished steel shaft is MSD's accurate mechanical advance assembly. The weights are supported by nylon pads that allow the advance to operate smoothly throughout the rpm range. For all-out racing, the advance mechanism can also be easily locked out. To accurately trigger the ignition, a high-output magnetic pickup is bolted to the base. This pickup produces a precise trigger signal that will never vary more than one degree at any rpm. A durable gear is installed for performance applications, and an MSD red cap with brass terminals and race rotor is supplied. They're available in standard and small diameter models for applications with limited clearance, and require the use of a separate ignition box such as an MSD 6, 7, 8, or 10 Series ignition.
( 405 )
$562.95
—
$614.95
On Sale
We understand that it doesn't matter whether you're cruising or racing--a comfortable set of seats is a must-have for any vehicle. These Summit Racing™ sport seat combos include two Summit Racing™ sport seats, two Scat seat mounting brackets, and two Summit Racing™ bracket adapters. With adjustable sliders, lumbar and shoulder supports, cutouts for safety harnesses, and recline and tilt forward mechanisms, these Summit Racing™ sport seat combos offer perfect adjustability and comfort for any road or track vehicle.
( 26 )
$717.94
$617.94
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
