Availability
Showing In Stock Items. Show All 54 Items.
Summit Racing™ V-belt pulley kits make an ideal replacement as a standard ratio pulley kit for worn stock parts. They're available in a choice of chrome plated or black painted finish—and include crankshaft pulley, water pump pulley, power steering pulley, alternator pulley, the brackets, and hardware. Order the kit designed for your vehicle and engine application.
( 127 )
$131.99
—
$147.99
These water pump pulleys from Billet Specialties are machined from 6061-T6 billet aluminum for incredible balance and strength. The benefit of a billet aluminum pulley over a cast pulley is equal density. With a cast pulley, the aluminum is poured into a mold and then allowed to cool. This process can create variations in density throughout the pulley. Dense areas are heavier than the more porous areas causing the pulley to vibrate at high RPM. These billet pulleys are equally dense throughout; equal weight translates to a true and balanced pulley drive system.
( 59 )
$113.95
—
$120.95
March Performance 1979-93 5.0L Ford pulley kits are designed for normal street driving. They reduce accessory drag, which typically creates about 12.5 HP at the rear wheels and eliminates belt throwing. These 3-piece pulley kits are available in both aluminum and steel sets. Aluminum sets are machined from 6061-T6 billet aluminum for extra strength. They are hand-polished and then covered with a "no polishing" clear powdercoated finish. They're also given a durable hard coating on the crank pulley to prevent oil seal leaks, and on the water pump pulleys to prevent premature wear. Steel sets are made from high-carbon steel, precision-machined to run perfectly true. They are coated with iron phosphate, and then given a high-gloss black polyester powdercoating for maximum rust prevention.
( 4 )
$131.99
—
$174.99
Increase horsepower and eliminate belt throwing with March Performance Ford 302-351 Windsor and Cleveland serpentine conversion pulley kits. These simple-to-bolt-on pulleys replace your low-performance V-belt pulleys, while retaining your standard rotation water pump. They are CNC-machined from solid billet 6061 T-6 aluminum for extra strength and wear, and are covered with a no-polish clear powdercoated finish. They come available in Performance series and high water flow style pulleys to suit your needs. Performance series pulleys create approximately 12.5 to 15 hp at the rear wheels by reducing accessory drag. They also eliminate belt throwing and are designed for normal street driving. High water flow pulleys increase cooling by speeding up water flow and fan speed. This helps at critical low-speed driving, where most overheating occurs.
( 30 )
$199.99
—
$242.99
Allstar Performance 1:1 ratio pulley kits are lightweight, double-groove aluminum pulleys. They include crank and water pump pulleys and belts for use with Allstar block or head-mount power steering pumps. Order the model recommended for your engine application.
( 14 )
$114.99
Save weight and gain the extra horsepower that will get you into the winner's circle! These high performance kits feature less-tension-required belts and lightweight billet aluminum pulleys and components. Make your setup efficient to produce the horsepower that you want with Jones Racing serpentine drive kits.
Not Yet Reviewed
$210.00
March Performance aluminum serpentine water pump pulleys are precision CNC-machined to run perfectly true. They are machined from 6061-T6 aluminum for extra strength and wear, and feature a no-polishing clear powdercoated finish. These water pump pulleys are available in performance ratios for increased horsepower, mid-performance ratios, and high water flow ratios. They are designed to increase cooling during critical low-speed driving to prevent overheating.
( 75 )
$100.99
—
$144.99
Billet Specialties crankshaft pulleys are machined from 6061 T-6 billet aluminum and are polished to a mirror finish. These billet pulleys are equally dense throughout, which translates into a true and balanced pulley drive system for a better ride.
( 71 )
$103.95
—
$113.95
Peterson Fluid Systems spline drive kits are strong easy to use alternatives to standard mandrels. Precision machined from 6061-T6 billet aluminum and hard coat anodized, these kits eliminate the long crankshaft bolt that can cause issues, and will work with all Peterson spline drive components. They include all hardware to mount to balancer.
Not Yet Reviewed
$191.99
—
$202.99
Trans-Dapt Performance steel crankshaft pulleys increase horsepower and reduce accessory drag. They are available in your choice of two finishes. Since Chevrolet has made a variety of pulley diameters, Trans-Dapt has chosen the most popular diameters for their pulleys. In some instances, the stock accessories may not run at the same speed as originally designed.
( 31 )
$116.99
—
$127.99
March Performance aluminum V-belt water pump pulleys are precision CNC-machined to run perfectly true. Machined from 6061-T6 aluminum for extra strength and wear, they feature a no-polishing, clear powdercoated finish. Choose from 1 or 2-groove water pump pulleys for your application. They are available in performance ratios for increased horsepower during normal street driving, and high water flow ratios for increased cooling during critical low-speed driving, to prevent overheating.
( 106 )
$102.99
—
$139.99
Vintage Air water pump pulleys add the finishing touch to your engine compartment. Remove the guesswork—if Vintage Air says something fits, it fits. There's never any fine-tuning or modifying their components to get them to fit; just follow the instructions and enjoy the results. Don't try to align your water pump using aftermarket pulley systems; Vintage Air decided that there had to be a better way. Their machined steel or aluminum V-belt pulleys are designed to the tightest possible configuration. Versions are available for a wide variety of makes and models.
( 7 )
$100.99
—
$138.99
March Performance crankshaft pulleys are CNC-machined to run true. These pulleys are available in both standard and underdrive sizes. Underdrive pulleys help to increase horsepower by reducing accessory pulley rotation effort at the crankshaft.
( 239 )
$100.99
—
$137.99
These Mr. Gasket chrome plated steel water pump pulleys are designed for Chevy big and small block engines with 5/8 in. water pump shafts. These pulleys are ideal for replacing your stock black pulleys. They feature a highly polished chrome finish for long-lasting beauty.
( 23 )
$101.95
—
$249.95
Vintage Air crankshaft pulleys add a great finishing touch to your engine compartment. Manufactured from variety of materials and featuring popular finishes, these pulleys are just what you need to accessorize your climate control system. Help your ride keep its cool with an assist from the Vintage Air crankshaft pulleys best suited for your application.
( 9 )
$151.99
Gilmer-style pulleys from Top Street Performance are a great solution for any racing set-up. They require less tension and eliminate the problem of slippage and disengagement you'd experience at high RPM with a V-belt. Each kit comes with pulleys for the crankshaft, water pump, and alternator—along with a 1.5 in. wide belt. Regardless of application, Top Street's Gilmer-style pulley kits are an efficient and lightweight option for your high performance engine. Additional notes: * Models available for Chevy big block or small block engines * Pulley material: billet aluminum * Available in black or satin
( 4 )
$192.60
—
$197.54
Replace your stock engine pulleys with a pair of chrome plated steel crank pulleys from Mr. Gasket. These pulleys are highly polished and then chrome plated for lasting beauty.
( 16 )
$114.95
These Vintage Air crankshaft pulley spacer kits feature chrome plated, high-quality steel. Vintage Air is operated by experienced street rodders and has been producing high performance air conditioning components for over 30 years. They incorporate the latest technology with their crankshaft pulley spacer kits, which offer the greatest efficiency and reliability available. Make sure you choose an air conditioning system from a company who has been using their own product for 30 years. Choose Vintage Air.
( 3 )
$141.99
These belt tensioner bracket from March Performance are designed for use with the Tensioner Bracket on your Style Track serpentine drive system. You can count on March Performance for the components you need for your pulley system.
( 3 )
$181.99
—
$209.99
March Performance Chevy V-belt pulley kits are available for your big or small block Chevy applications with long or short water pumps. These kits come with either performance ratio or high water flow ratio pulleys, depending on your needs. Both types of pulleys are precision CNC-machined from 6061 T-6 aluminum and feature a clear powdercoated finish. Performance ratio pulleys reduce accessory drag and create about 12 to 15 hp in the rear wheels. Designed for daily street driving, these pulley kits also eliminate belt throwing. High water flow ratio pulleys increase water flow and fan speed, thus increasing cooling. This helps at critical low-speed driving, where most overheating occurs. Optional power steering keyway pulleys, power steering press-fit pulleys, and alternator fans are also available.
( 44 )
$218.99
—
$244.99
March Performance Chevy small block serpentine conversion kits are mid-mount pulley kits that place your alternator below the centerline of the water pump. They are simple to bolt on, while still retaining your standard-rotation water pump. Serpentine belts eliminate belt throwing. The kits are available with performance pulleys for increased horsepower, high water flow ratios for increased cooling, or mid-performance ratios for a combination of both. The pulleys are CNC-machined from solid billet 6061 T-6 aluminum for a spectacular looking machine finish with a perfect fit and extra-high strength. All March Performance billet pulleys and brackets have a maintenance-free clear powdercoating. These performance pulleys will increase your engine by approximately 12 to 15 hp, depending on the accessories driven. The kits are available with a driver side mounted A/C option. The use of a combination bracket in these kits allows for the addition of an alternator idler, which provides excellent belt wrap around the alternator and A/C compressor pulleys.
( 96 )
$199.99
—
$249.99
Champ Pans water pump pulleys are machined from billet aluminum with a black hardcoat finish. They're available for a variety of engines, including small block Chevys. Choose from upper or lower pulley models, with double or triple grooves—as well as the size, reduction, and ratio needed for your application. Replace your worn water pump pulley with a top-quality unit from the high performance experts at Champ Pans.
( 3 )
$133.50
March Performance idler pulleys are manufactured from quality polished aluminum. They feature ribbed and non-ribbed designs with double bearings and are hard-coated for increased wear. March idler pulleys were designed to help prevent your belts from slipping.
( 34 )
$161.99
—
$194.99
Made from billet aluminum and polished for that show-quality finish, these UniSteer power steering pulleys are visible standout pieces on any engine. UniSteer can provide these pulleys separately or installed on one of their pumps. UniSteer stands behind their products with a 2-year, Unlimited Mile Warranty.
( 1 )
$154.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
