Availability
Because all roller cam lobes are ground flat instead of tapered, like hydraulic or solid cams, COMP Cams provides a means of holding the cam back to the rear of the engine. Their cam buttons ride between the front of the timing gear and the back of the front cover and can be shimmed for proper endplay of the cam. COMP Cams makes solid nylon buttons and roller bearing thrust buttons for the ultimate in performance.
( 109 )
$15.95
COMP Cams cam lock plates will keep your cam installed in the right position. Most locking plates come with Grade 8 bolts and have a black oxide finish.
( 64 )
$10.95
These High Energy hydraulic lifters from COMP Cams feature a patented, constant orifice-metering valve that precisely meters oil to the rocker arms. Continuous contact between the metering valve and the precisely coined bottom surface of the pushrod seat is maintained throughout the engine's rpm range, eliminating excessive oiling at high speeds. The pushrod seat is made of a special powdered metal iron alloy, heat-treated for strength and wear resistance. The longer piston is produced with through-hardened steel that provides more bearing surface and increased lifter longevity. These lifters have a lightweight check valve disk that allows for quicker response, resulting in increased engine speed before valve float.
( 156 )
$14.95
—
$18.95
COMP Cams roller lifter link bars are designed to replace your worn or damaged link bars, when fitted to COMP Cams roller lifters. They are precision-crafted from stainless steel and wear-coated for a long life in all applications.
( 1 )
$14.95
Stress placed on cams and timing sets in today's racing engines produces a weak area at the front of the block. COMP Cams solved the problem with their moly-coated wear plates and thrust bearings. They are a must for all Chevy big block engines. The thrust bearings are a one-piece encapsulated design for the Chevys and a 3-piece design for Fords.
( 19 )
$16.95
—
$19.95
These COMP Cams engine finishing kits contain the often-forgotten components missing during final engine assembly. They include parts like Woodruff keys, cylinder head alignment dowels, cam bolts, timing cover dowels, and oil pump dowels. Available for small and big block Chevrolet and small block Ford engines, the COMP Cams engine finishing kits make engine assembly easy.
( 66 )
$18.95
—
$19.95
For the enthusiast who chooses a solid lifter cam, COMP Cams offers the highest quality solid lifters available today. These lifters are manufactured using the tightest tolerances in the industry, ensuring optimum performance. The crown of the lifters is ground to a precise radius for proper break-in and to guarantee long life. The oil-metering band is milled to the correct depth to prevent too much oil from being delivered to the top of the motor, and to prevent horsepower loss. Order the size and quantity needed for your engine application.
( 28 )
$16.95
—
$18.95
High Energy rocker arms from COMP Cams are excellent replacements for stock engine rebuilds with a stock or High Energy camshaft. They eliminate the noise and slop associated with worn or high-mileage stock rockers and match or exceed factory specifications.
( 28 )
$15.95
—
$16.95
COMP Cams Performance Series solid lifters are specifically designed for high-end street and race applications. They feature a precision-ground crown radius and surface finish to promote performance camshaft compatibility and high-rpm durability. The lightweight design and premium one-piece pushrod seat provide an extended rpm range, and their accurately located oil band yields a consistent, properly metered oil flow.
( 23 )
$16.95
COMP Cams pushrod guideplates are necessary in high-rpm motors. They keep your pushrods in line with your lifter cups and rocker arms—and prevent deflecting or walking sideways. The guideplates are hardened to prevent premature wear. They're available in sizes and styles for fitment on a variety of engine applications.
( 182 )
$13.95
—
$16.95
Featuring precision tolerances and superior final machining, COMP Cams Sportsman stainless steel valves offer outstanding performance and durability for high-rpm, high-horsepower engines. They are manufactured from 21-4N high-strength, one-piece stainless steel. They also feature a chrome polished stem, hardened tips, and high-flow underhead for minimum flow restriction. Recommended for hydraulic, mechanical, or roller lifter camshaft cylinder heads, COMP Cams Sportsman stainless steel valves provide you with the reliability and performance that you require.
( 7 )
$18.95
Replace your stock rocker arm studs with these COMP Cams rocker arm studs. The Magnum series studs work well in applications with moderate lifts and spring pressures. These studs have thin jam nuts for rocker clearance, rolled threads for maximum contact, and ground-flat tops to achieve and maintain accurate valve adjustments. The jam nuts are large in diameter to spread the load over larger areas. COMP Cams studs have generous radii and feature a black oxide finish.
( 24 )
$11.95
These COMP Cams Pro Magnum hydraulic lifters are specifically designed to perform at higher engine speeds. When engines are equipped with a hydraulic camshaft, high rpm is limited by the improper positioning of the internal piston as the lifter inevitably "pumps up." This improper location results in broken valves, and, therefore, leads to lost power or sometimes even engine failure. These lifters offer a distinct advantage over standard high-performance hydraulic lifters, especially in race applications where a hydraulic lifter must be used.
( 38 )
$15.95
COMP Cams offers replacement timing cover gaskets for a variety of applications. Made from top-quality materials, they ensure a leak-free seal.
( 2 )
$14.95
Replace your stock rocker arm studs with these COMP Cams rocker arm studs. When ultimate strength is required, as with high-rpm roller cam applications, Hi-Tech Race studs are just what you need. These studs have thin jam nuts for rocker clearance, rolled threads for maximum contact, and ground-flat tops to achieve and maintain accurate valve adjustments. The jam nuts are large in diameter to spread the load over larger areas. All COMP Cams Hi-Tech studs have generous radii and feature a black oxide finish.
( 23 )
$12.95
—
$18.95
COMP Cams camshaft bolts are designed to prevent breakage. They are rated at 170,000 psi and are available for most popular applications. These bolts are the perfect items to top-off any camshaft installation.
( 7 )
$16.95
Using COMP Cams offset bushings is the simplest way to change the degree of a camshaft in relation to the crankshaft. These bushings offer accurate positioning of the cam because of their precise manufacturing.
( 14 )
$17.95
COMP Cams hydraulic lifters have a patented, constant orifice-metering valve that precisely meters oil to the rocker arms. Continuous contact between the metering valve and the precisely coined bottom surface of the pushrod seat is maintained throughout the engine's rpm range, eliminating excessive oiling at high speeds. The pushrod seat is made of a special, powdered-metal iron alloy and heat-treated for strength and wear resistance. These lifters are produced with a longer piston than conventional hydraulic lifters. The extra length is made possible from a counter-bored pushrod seat position. The longer piston is produced with through-hardened steel that provides more bearing surface and increased lifter longevity.
( 7 )
$15.95
Prevent your lifters from rotating with Comp Cams retrofit lifter guides. Utilize these guides to keep the wheels of your hydraulic lifters rolling and prevent them from sliding over your cam. These "dog bones" are made from steel. Keep your lifters in line with Comp Cams retrofit hydraulic roller lifter guides.
( 3 )
$14.95
COMP Cams rocker arm shaft spacers are designed to allow the engine to rev higher and reduce the possibility of parts breakage. They are used on engines with adjustable rocker arms to improve valve tip alignment. Select the thickness needed.
( 1 )
$17.95
COMP Cams race hydraulic lifters offer superior all-around performance and durability for your race application. Made to super-strict tolerances, these lifters feature tighter plunger-to-body tolerances, premium one-piece pushrod seats, lubricated cam faces, and heavy-duty snap rings. COMP Cams race hydraulic lifters are the racer's choice for optimizing their valvetrain performance!
( 2 )
$15.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
