Availability
Cometic MLS head gaskets are constructed from multiple layers of stainless steel for strength and contain load-controlled embossments that conform load distribution across the sealing area. This creates an exceptional seal by requiring less clamp load—resulting in less bore distortion. The stainless steel outer layers utilize FKM (Viton®) rubber coating, a high-temperature and chemical-resistant polymer. A topcoat of PTFE aids in resistance to fret and increased cold sealing. MLS head gaskets are available for most aftermarket cylinder heads; as with all of Cometic's MLS head gaskets, no sealants or re-torque is required.
( 555 )
$75.97
—
$98.94
Cometic MLS marine head gaskets are designed to provide maximum sealing performance for today's high-output marine engines. These high performance gaskets feature multi-layer stainless steel construction that provides excellent strength, rebound, and corrosion resistance. Their outer layers are embossed and coated on both sides with Viton®, which meets the demands of harsh sealing environments, load conditions, and surface finishes. The center layer is uncoated stainless steel, which is available in multiple thicknesses. Cometic MLS marine head gaskets promote an even clamp load across the sealing surface for reduced bore distortion, with no need to retorque.
( 7 )
$90.53
—
$95.06
Keep your oil from escaping with rear main seals from Cometic Gasket. If you have a wet spot on the rear of your oil pan, spots on your driveway, or garage floor, or worse, an oil-covered transmission, then you'd better get rear main seals from Cometic. They are made from heat-resistant, chemical-resistant Viton® material and are available in one and 2-piece seal styles. When you need superior gaskets for your high performance vehicle, Cometic has the gaskets and rear main seals to fit your application.
( 15 )
$79.04
—
$88.43
Cometic AFM intake gaskets are constructed from a chemically blown, compounded nitrile synthetic rubber bonded to an aluminum core. The gasket material has a temperature resistance of over 250 degrees and an 85 percent recovery, while maintaining strong torque retention. Cometic AFM intake gaskets are ideal for machined surfaces, especially uneven stamped surfaces that have been plated. AFM intake gaskets retain torque and require no additional sealers.
( 26 )
$65.21
Cometic Street Pro bottom-end gasket sets gather all of the necessary parts in one handy kit, tailored to specific years/makes/models. Rebuilding or servicing an engine can be quite an ordeal--trying to locate all of the correct gaskets, seals, washers, and O-rings for the many sections. If the fit isn't perfect, you know the messy results.There's no need for you to hunt down replacement seals for oil pans, water pumps, pickup tubes, cranks, drains, timing covers, retainers... you get the picture. Match up your vehicle with the corresponding Cometic Street Pro bottom-end gasket set and order today!
( 2 )
$57.14
—
$86.96
Cometic Gasket's commitment to cutting-edge technology has produced superior-quality gaskets like these Cometic MLS exhaust gaskets. They are constructed from multiple layers of strong stainless steel that has excellent rebound ability and corrosion-resistant characteristics. Outer layers are coated with a heat-resistant, rubber-based material to create a seal that can withstand a variety of sealing and load conditions and surfaces. Cometic MLS exhaust gaskets are ideal for all types of head and block material and their design promotes an even torque load across the sealing surface, allowing for measurably reduced bore distortion.
( 33 )
$57.36
—
$76.01
Cometic MLS intake gaskets are a result of Cometic Gasket's commitment to cutting-edge technology and producing superior-quality gaskets. These intake gaskets are constructed from multiple layers of strong stainless steel with excellent rebound ability and corrosion-resistant characteristics. The outer layers are coated with a heat-resistant, rubber-based material to create a seal that can withstand a variety of sealing and load conditions and surfaces. Cometic MLS intake gaskets are ideal for all types of head and block material. Their design promotes an even torque load across the sealing surface, allowing for measurably reduced bore distortion.
Not Yet Reviewed
$75.93
Cometic Gasket primary gasket kits use quality materials to perfectly fit your application and have been proven to withstand through the most demanding conditions. Cometic gaskets, seals, and O-rings meet or exceed OEM specifications. Service your bike back to perfection with gasket kits from Cometic Gasket!
Not Yet Reviewed
$98.26
Cometic Gasket has developed some of the highest performing gaskets available. Their gaskets have a proven history under the most demanding conditions. Cometic powersports head gaskets are constructed from a variety of high-quality materials to perfectly fit your application. Why not let Cometic Gasket's experience work for you?
( 1 )
$56.49
—
$95.80
Cometic Gasket derby cover gaskets and O-rings offer long-term reliability. They are simple yet critical components for sealing various applications. Cometic designs their products to meet the demands of harsh sealing environments, load conditions, and various surface finishes. These premium gaskets and O-rings offer a direct factory fit to provide hassle-free installation.
Not Yet Reviewed
$50.18
Cometic copper head gaskets create a tight seal you can depend on. These gaskets are made out of a premium soft copper that is specifically designed to create a seal that you can depend on, even in high performance engines. Cometic offers their copper head gaskets in a variety of thicknesses to make finding the right match for your ride easy. Don't settle for lesser quality head gaskets when you can trust Cometic copper head gaskets.
Not Yet Reviewed
$97.07
Cometic Gasket bottom-end gasket kits take the hassle out of rebuilding an engine. Don't waste your time searching for gasket part numbers. Cometic Gasket bottom-end gasket kits contain the most requested gaskets you need to complete your rebuild the right way, the first time. And, they give you strong sealing gaskets that are made to meet or exceed OEM specifications. Please pick the kits that suit your needs. Some gasket kits contain all of the gaskets needed for a total rebuild, and other kits contain only the most commonly requested gaskets.
Not Yet Reviewed
$62.36
Cometic Gasket EST (Extreme Sealing Technology) top-end gasket kits contain the most technologically advanced materials available to ensure a critical seal and superior durability that meet and exceed OE specifications. These Cometic Gasket EST top-end gasket kits are complete with a head gasket, a base gasket, and designated kits include reed, power valve, and exhaust gaskets. Cometic multi-layer steel head gaskets are comprised of two embossed Viton® coated stainless steel outer layers and a variable stainless center layer. The base gaskets are Viton® coated rubber with a steel core. Some of these kits include engine cover gaskets made from AFM material--a nitrile synthetic rubber that is bonded to an aluminum core.
Not Yet Reviewed
$69.90
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
