1978 PONTIAC FIREBIRD Parts & Accessories

ATK High Performance GM 350 Vortec 350 HP Stage 3 Long Block Crate Engines with EFI

ATK High Performance GM 350 Vortec 350 hp Stage 3 long block crate engines with EFI are designed for better drivability and trouble-free cold starts with no tuning required, regardless of elevation, driving habits, or part swap! Based around FiTech Self-Learning EFI systems, these engines come complete from throttle body down to the oil pan. The only thing you'll need is to supply is the fuel system--inline, in-tank, or the FiTech Fuel Command Center. They're dyno-tested with your EFI system and ready to go! Engine specifications: * HP: 350 * TQ: 400 * Block: OE roller block 4-bolt main 1-pc. seal 1996-2000 * Bore/Stroke: 4.040 in. x 3.480 in. * Displacement: 350CI * Crankshaft: OE reground external balance rear of crank/internal balance front of the crank * Rods: OE powder metal 5.7 in. * Pistons: Hypereutectic 9.5:1 compression * Rings: Moly * Camshaft: Hyd. Roller * Cam Specs: 220/224 @ 50 .495in/.502ex 110LSA * Timing Chain: Double roller * Cylinder Heads: Vortec cast iron 67cc 1.94/1.50 * Rocker Arms: Stamped steel 1.5 ratio * Oil Pan: Rear sump 5qt (not for Chevelles with steering behind crossmember, some Corvettes and 62-67 Chevy II's) * Oil Pump: Melling STD volume * Balancer: Internally balanced – PowerBond #PB1046-N * Flexplate: Externally balanced – Pioneer #FRA-159 * Intake Manifold: ATK HP dual plane * Distributor: HEI (Iron Gear) * Water Pump: OE long pump * EFI System: Fitech Go Street EFI 400HP (throttle body, wire harness and hand held unit included) * Fuel Pump: Not Provided - must run electric pump or mechanical fuel pump with Fitech fuel command center * Spark Plugs: Autolite #605 * Spark Plug Wires: 8mm Engine info: * Oil: Conventional/Non Synthetic 10W30 * Oil Filter: Wix or K&N * Timing: 34-36 degrees * Spark Plug Gap: .035 in. * Firing Order: 18436572 * Octane: 91+ * Stall Converter: Stock * Exhaust: 1 5/8 headers

2.5 out of 5 stars ( 2 )

$5,198.99

QA1 Level 2 Full Vehicle Drag Racing Suspension Kits

Looking for a better launch, straight-line stability, and consistent performance? Turn to QA1's drag racing suspension kits for a full-vehicle upgrade that fits your needs. Available in three different levels of performance, these drag racing kits offer easy, bolt-in installation (some welding may be needed) and seamlessly works with whatever OE component each piece attaches to. And with different levels, you can build your car in stages, using QA1's parts list as a road map to get to the level of performance you want and have peace of mind knowing you won't have compatibility issues. QA1 Level 2 drag racing kits are ideal for owners looking for serious performance gains at the track. They deliver everything needed in one shot, taking the guesswork out of the process, so you can skip the research and focus on preparing for your next race. Select the kit designed for your drag race car.

Not Yet Reviewed

$6,398.95

RideTech Subframes

Ridetech subframes deliver several key improvements over the original and some existing aftermarket subframes. Optimized suspension geometry, improved wheel and tire clearance, and rack and pinion steering technology, plus many more features will surely put Ridetech's subframes on the top of your builder's wish list. Select the kit with the preferred spindles. Features and benefits: * Optimized geometry provides improved roll center, Ackermann, camber gain, caster and bump steer * Lowers stance 1 to 3 in. and maintains factory track width while increasing wheel and tire clearance * 2 in. more tire clearance per side over stock subframe allows better turning radius with larger tires/wheels * Fits up to 6.5 in. BS with no modifications or reduction in turning radius * Rack and pinion steering upgrade provides improved steering feel, enhancing driver feedback * Modular design is compatible with coilovers or Shockwaves (sold separately) * Subframe features durable powdercoat finish for great, long-lasting good looks and corrosion resistance * Available with AFX pin or late model hub spindle design -- Hub spindle allows install of modern C5/C6 Corvette brakes and C5/C6/C7 hubs (hubs not included) -- Pin spindle is compatible with stock style brakes (including aftermarket kits that fit stock spindle) * One-piece billet 6061 T-6 aluminum upper control arms and steering arms add superior strength * Larger front sway bar controls body roll, improving weight transfer * Tubular lower control arms include eccentric adjustment for caster and camber adjustments * Alignment adjustments are made complete under the car --no adjustments inside engine bay * Multiple motor mount options * Included adjustable transmission crossmember compatible with most popular manual and automatic transmissions * Improved header clearance and exhaust routing allow for a variety exhaust solutions

Not Yet Reviewed

$6,645.00

QA1 Level 2 Full Vehicle Handling Suspension Kits

QA1's handling suspension kits provide a full-vehicle upgrade that fits your needs. Available in three different levels of performance, you can build your car in stages, using QA1's parts list as a road map to get to the level of performance you want and have peace of mind knowing you won't have compatibility issues. Greater control and improved cornering are key benefits of QA1 Level 2 handling suspension kits. They're designed to boost performance and include a more extensive assembly of components than Level 1 kits. They offer easy bolt-on installation and full compatibility with the OEM parts you attach them to. All QA1 handling suspension kits are available with or without shocks and struts—giving you the flexibility to obtain the shocks or struts and spring rates you desire. Select the kit designed for your vehicle.

5.0 out of 5 stars ( 12 )

$6,488.95

—

$8,326.95

Detroit Speed Hydroformed Subframes

Detroit Speed hydroformed subframes are bolt-in replacements for the original stock subframe. They're designed to improve the handling and ride quality by utilizing Detroit Speed's unique suspension geometry. These are the only subframes in the aftermarket industry with hydroformed frame rails—which offer strength and stiffness, precise quality, and repeatability. Hydroforming preserves the steel's integrity because it's crafted at low temperatures, unlike traditional high-temperature processes which decrease material strength. Dozens of models are available for vehicles from the 1960s, '70s, and '80s. Order the package recommended for your application. Detroit Speed hydroformed subframes also include: * Stamped crossmembers * Tubular upper and lower control arms * Coilover shocks with "Detroit Tuned" valving * Coilover spring * Power rack and pinion steering * Splined sway bar * C6 steering knuckles and bearing packs

Not Yet Reviewed

$10,742.95

—

$12,287.95

Heidts Pro-G Independent Rear Suspension Kits

Heidts Pro-G IRS suspension kits are designed to bring the superior ride and handling of independent rear suspension to your muscle car. Out-handle the competition and put all of that horsepower to the ground. Heidts Pro-G IRS suspension kits produce 1/2 degree of camber curve at 3/4 of bump, especially during very high cornering loads. Features include: * Cast iron Ford 9 in. center section mounted in an aluminum housing * 31-spline posi-traction hooked up to heavy-duty half shaft CV joint axle shafts * Tubular upper and lower control arms * Steel outer uprights * Top crossmember * Frame mounting brackets * Wilwood rear brake rotors and calipers * Billet aluminum single adjustable coilover shocks with silver powdercoated springs

Not Yet Reviewed

$10,717.00

QA1 Level 3 Full Vehicle Handling Suspension Kits

QA1's handling suspension kits provide a full-vehicle upgrade that fits your needs. Available in three different levels of performance, you can build your car in stages, using QA1's parts list as a road map to get to the level of performance you want and have peace of mind knowing you won't have compatibility issues. Top performance is the desired goal of many automotive upgrades—precisely what QA1 Level 3 handling suspension kits deliver. Compared with the Level 1 and 2 packages, these heavy-duty assemblies offer additional control components, as well as stiffer springs to maximize your cornering ability and handling. QA1 Level 3 kits are available with or without shocks and struts—giving you the flexibility to obtain the shocks or struts and spring rates you want. Select the kit designed for your vehicle.

Not Yet Reviewed

$8,898.95

—

$10,736.95

Baer Brakes Baer Claw Extreme+ Disc Brake Systems

Baer Brakes Baer Claw Extreme+ disc brake systems are Baer's flagship offerings, featuring their forged Monoblock calipers mounted to 2-piece rotors. The Extreme+ systems employ current state-of-the-art race technology usually only found in very expensive race calipers. Baer now brings that technology to the road-going market. The 6S line of calipers represent Baer's most aggressive road offering and are suitable for virtually any level of track use. Optional R-Spec 6R calipers are a race version of 6S calipers; available for any Extreme+ system. The R-Spec calipers feature additional machining to the 6S calipers to save close to 2 lbs. per caliper and allow for top-loaded pads. Over 400 models are available for specific vehicle, bolt pattern, and axle applications. Features include: * MonoBlock calipers machined from a single piece of 2618 forged aluminum * The only 6-piston, forged, mono-block calipers offered to the road-going/street market * Stainless steel pistons, abutments, and noise-suppression springs * Staggered piston sizes to minimize pad wear * Uses the common D1247 (DR11) race pad backing plate, shared by many competition calipers * Dual seals (dust/weather and pressure) to meet D.O.T specifications * Caliper can accept 13.5 in. to 16 in. rotors * Machined, hand-painted logos * Available in a variety of powdercoat finishes * Uses correct banjo-style fittings; Baer does not use any pipe thread * Available for front or rear * Offers the exact same look front and rear—the only brake manufacturer that offers this! * Rear systems incorporate a drum-in-hat parking brake * Rear systems for C-clip axles include Baer's Verislide self-centering brackets * Systems include everything needed for each corner, including hoses and fittings (except for general fit applications)

3.0 out of 5 stars ( 1 )

$5,118.95

QA1 Level 3 Full Vehicle Drag Racing Suspension Kits

QA1 Level 3 Drag Racing suspension kits furnish your vehicle with the ability for a better launch, straight-line stability, and consistent performance. These kits utilize high-quality parts engineered together as a system to take the guesswork out of choosing the right pieces to support your performance goals. Many feature QA1's MOD Series front drag suspension kit or MOD Series front or front and rear Pro Coil system matched with Drag Race control arms and additional components to equip your vehicle with race-winning performance. Choose the kit designed for your vehicle.

Not Yet Reviewed

$8,572.95

1978 PONTIAC FIREBIRD Parts and Accessories