1978 NISSAN 280Z - In Stock Filter Options - Vendor In Stock Filter Options Parts & Accessories

Resurrected Classics 240Z 260Z 280Z Steel Fender Sets

Resurrected Classics offers new reproduction steel fender sets for 1970-1978 Datsun 240Z, 260Zand 280Z models. They are the product of years of development, with numerous trials and test fitments. Resurrected Classics is proud to be the sole producer of these fenders that have the correct shape, curve, and thickness of the originals, and install easy with nice gaps. The fenders are manufactured with special attention paid to a quality fitment and ease of installation, while matching or exceeding OEM standards, and ship bolt-on ready, just like the factory, so you don't have to spend hours welding a panel in or paying a body shop to patch your existing panel. Order the steel fender set for your application needs. If you are also interested in purchasing new emblems to install on your new fenders, then check out other product listings from Resurrected Classics.

2.33 out of 5 stars ( 3 )

$799.99

Special Offer

Moroso Wet Sump Road Race Baffled Oil Pans

Moroso offers a variety of wet sump baffled oil pans for road racing, drag racing, street and strip, and Circle Track applications. They're available for a variety of year/make and engine applications. Control your vital lubricant in extreme driving situations with a replacement or upgrade Moroso wet sump baffled oil pan.

4.22 out of 5 stars ( 23 )

$910.99

Rhodes Race Cars Competition Roll Cages

Rhodes Race Cars competition roll cages meet or exceed NHRA and IHRA requirements (when properly installed). Available in 4, 6, 8, and 10-point models, all RRC bars are precision bent for each particular body style and feature notched tube ends (where applicable) for ease of installation. Increase chassis stiffness, and race safe with Rhodes Race Cars competition roll cages. RRC roll bars and cages are available in the following materials: * 1-3/4 in. x .134 in. wall mild steel tubing * 1-3/4 in. x .120 in. wall DOM tubing * 1-3/4 in. x .083 in. wall 4130 chromoly tubing The 4-point kits include main hoop, rear braces, seat crossmember, and four steel mounting plates. The 6-point kits include main hoop, rear braces, side bars, seat crossmember, and six steel mounting plates. The 8-point kits include main hoop, rear braces, side bars, frame supports, seat crossmember and 6 steel mounting plates. The 10-point kits include everything in the 8-point kits, plus a roof hoop, windshield runners, and dash crossmember. Note: Because of differing driver positions and main hoop locations, roof hoop and windshield down bars are not notched!

3.7 out of 5 stars ( 147 )

$849.95

South Bend Clutch Stage 3 Drag Race Clutch Kits

South Bend Clutch Stage 3 drag race clutch kits are powerfully built with heavily modified vehicles in mind—particularly those built for 1/4 and 1/8 mile tracks. They include a single mass SFI-approved flywheel with each kit, which is typically required for drag racing when the original design is dual mass. The pressure plate is race cover engineered to keep the clutch pedal travel short and quick. South Bend Clutch Stage 3 drag race clutch kits are recommended for drag racing, pulling, and drifting. Order the clutch kit recommended for your specific vehicle and engine size. Features, items, and specs include: * Puck-style disc reduces rotational mass and is assembled with all high-carbon components for maximum strength * Graphite-impregnated ceramic friction material perfectly suited for drag racing (maximum friction co-efficient, rapid heat dissipation, and abrupt engagement characteristics) * Meticulous processing and advanced packaging materials

Not Yet Reviewed

$897.33

Rhodes Race Cars SCCA, NASA, and Drift Roll Cages

Rhodes Race Cars SCCA, NASA, and Drift roll cages are made specifically for hobbyists and for serious racers looking to compete in SCCA, NASA, or Formula D events. All road race cages feature a main hoop diagonal and dual door bars (can be made into dual X-bars). They are weld-in cages and feature notched tube ends (where applicable) for ease of installation. Roll cages are offered in these materials: * 1 5/8 in. O.D. 0.134 in. wall ERW mild steel tubing * 1 5/8 in. O.D. 0.120 in. wall DOM tubing * 1 5/8 in. O.D. 0.083 in. wall 4130 chromoly tubing DOM tubing is very strongly recommended; ERW cages will most likely NOT pass tech inspection for most classes. Chromoly is not recommended by most sanctioning bodies. Due to different requirements for specific classes and weights, you should check with your track or sanctioning body for specific guidelines prior to purchase. It is the installer's responsibility to assure that a cage meets race organization rules as to tubing material and sizes, fit, placement of components, and welding. Note: Because of differing driver sizes and main hoop locations, roof hoop and windshield down bars are not notched. Some minor trimming may be required during installation.

5.0 out of 5 stars ( 2 )

$824.95

—

$974.95

South Bend Clutch Stage 4 X-Series Clutch Kits

South Bend Clutch Stage 4 X-Series clutch kits are build-to-order clutch packages for vehicles modified to exceed Stage 3 hp parameters. The kits include a steel, single mass, SFI-approved flywheel for safety. The race-engineered pressure plate is modified for maximum plate load, and helps to deliver more transmittable torque, stability, extended life, and superior thermal resistance. The South Bend Clutch Stage 4 X-Series clutch kits provide noticeably better dynamics through higher clamp loads, when driving your vehicle to its limits. Order the Stage 4 X-Series clutch kit recommended for your specific vehicle and engine size. Features, items, and specs include: * Puck-style disc offered in sprung and un-sprung options * Graphite-impregnated ceramic or sintered iron friction material options * Torque ratings calculated at time of ordering * Engagement characteristics can be abrupt * Meticulous processing and advanced packaging materials

Not Yet Reviewed

$962.44

South Bend Clutch Stage 3 Endurance Clutch Kits

South Bend Clutch Stage 3 Endurance clutch kits are recommended for single mass flywheel (SMF) when original design is DMF (dual mass) to achieve optimal performance. These kits use the same race-engineered SFI-approved pressure plates as Stage 3 Daily Driver packages. The disc is designed for the special needs of a vehicle with circuit racing in mind. Kevlar® friction material is used for its unique friction compounds applied with high-energy levels. This translates to a perfect transition from one gear to the next. Discs are assembled with only performance components and equipped with torsion springs functioning as a damper between engine and gearbox. These Stage 3 Endurance clutch kits are recommended for applications such as rally, endurance race, club sport, autocross, performance street and daily driving. Order the kit you need.

5.0 out of 5 stars ( 2 )

$767.11

Rhodes Race Cars Lemons and Chumps Roll Cages

Rhodes Race Cars Lemons and Chumps roll cages are specifically designed for those of you looking to compete in 24 Hour of Lemons and ChumpCar Series races. RRC has taken out all of the guess work and come up with these easy-to-install kits. All the tubing is pre-bent and notched for ease of installation. Rhodes Race Cars Lemons and Chumps roll cages are available in ERW mild steel, DOM, and chromoly. ERW mild steel is accepted by both sanctioning bodies, but DOM is very strongly recommended. Chromoly is generally NOT recommended for this type of racing. Check your sanctioning body's rules before you order! Note: Some minor trimming may be required during installation. All RRC cages are weld-in cages.

1.33 out of 5 stars ( 6 )

$824.95

—

$974.95

1978 NISSAN 280Z Parts and Accessories