Availability
Moroso oil pan gaskets offers race-quality, reinforced, and available for many popular engine applications. So, if you're tired of your car marking its territory in your garage or driveway, give one of these Moroso oil pan gaskets a try!
( 140 )
$44.99
—
$56.99
To maximize filter performance, Moroso race oil filters have a filtration rating of 27 microns. This results in a maximum pressure drop of only 2.5 psi, which results in more flow, less oil bypass, and maximum filtration performance, which is so important in severe racing conditions. Made with roll-formed threads for a precise, tight fit, and with an anti-drainback valve to keep oil in the filter after engine shutdown, they are perfect for any race application.
( 75 )
$21.99
—
$29.99
Moroso spark plug wire separators protect your plug wires from contacting hot engine components, and prevent ignition crossover by holding them away from one another. These separators snap into place with slight pressure and can be used to route wires just about any way you can think of. The high-temperature plastic separators securely grip the plug wires and are available in a variety of colors.
( 152 )
$26.99
Moroso's Super Looms wire looms can help keep your engine bay looking neat and orderly—as well as prevent ignition crossfire by keeping the plug wires spaced apart. These looms place your spark plug wires safely out of the way of hot headers or exhaust manifolds. They feature chrome plated brackets for stout valve cover mounting, and high temperature plastic separator looms to securely grip the spark plug wires. Moroso Super Looms are available in a variety of colors and styles for fitment with most engines.
( 122 )
$24.42
—
$39.99
Moroso Perm-Align valve cover gaskets are manufactured from 30-durometer rubber, which is molded over and vulcanized to a rigid steel frame. They won't leak, blow out, or get sucked in, the way stock or inferior-quality aftermarket gaskets can. These gaskets feature superior-quality rubber and steel, which outlast cork-and-rubber composite designs to provide years of dependable service, especially if you frequently have to remove and reinstall the valve covers.
( 194 )
$52.99
These mounts are made for racing. Moroso solid steel motor mounts replace stock, OEM-style rubber mounts to prevent torque loss and binding linkages, a common result of excessive engine movement. These solid steel mounts eliminate the need for bulky torque straps and chains and are covered with a protective zinc coating.
( 133 )
$38.99
—
$51.99
Moroso timing pointers feature up to four degrees of adjustment for the best fit. They are manufactured from billet aluminum and have a black anodized finish applied for maximum corrosion resistance. The pointers have a unique smaller shape to hug the harmonic balancer for better, more accurate readings. Moroso timing pointers also include Allen head, countersunk stainless steel mounting hardware for installation.
( 62 )
$41.99
—
$47.99
Professional engine builders are familiar with camshaft walk. Excessive camshaft end play can produce erratic spark timing and the movement of the timing chain/gear can destroy the timing cover. Moroso has solved this problem with a wear resistant cam stop button that mounts in an aluminum holder, which bolts to the cam gear by way of a retaining plate. These button assemblies do not allow the cam to walk forward, stabilizing ignition timing and preventing costly engine damage.
( 18 )
$25.99
Moroso thermostat spacers make fixing fitment issues a snap. The billet aluminum spacers raise the thermostat and add ports for water lines to the cylinder heads. The machined O-ring groove on the intake side ensures an excellent seal making installation easy and headache-free.
( 7 )
$44.99
—
$49.99
Who said high quality and high performance can't be cost effective? Moroso Ultra ignition wire sets are equal to or exceed OEM specifications, depending on the application, without the dealer prices. Moroso has more than 50 years of experience in supplying spark plug wires to the top teams of NASCAR and NHRA, as well as auto manufacturers. These sets are available in different thicknesses and colors, assembled or not, with multiple boot end angles. Some models include high temperature sleeves. Order the ignition wires recommended for your application.
( 54 )
$42.99
—
$47.99
Moroso high-temp under header wire looms are designed to withstand high temperatures associated with headers and route the wires below the heat. Since hot air rises, the wires stay cooler and give the engine a cleaner look. They include chrome plated brackets, high-temp wire separators, and mounting bolts.
( 23 )
$44.99
Moroso transmission pan gaskets are manufactured from 40 Durometer rubber that's molded over and vulcanized to a rigid steel frame. They allow for the quick removal and installation of transmission pans, requiring no removal of sealant, making them cleaner and easier to use. The extra-strength Moroso transmission pan gaskets will not leak, blow out, or get sucked in like stock or inferior-quality aftermarket gaskets. At a full 3/16 in., the Moroso transmission pan gaskets are guaranteed to outlast cork or rubber composite designs.
( 353 )
$40.99
These oil pan bolts are made from Grade 8 steel. They have an integral serrated washer face, which gives them a self-locking effect.
( 35 )
$20.99
—
$52.99
Unlike other roller pilot bearings, these high speed bearings are designed as direct replacements in all Chevrolet V8s, 90 degree V6s, and 1976 and later V6 Buicks. Moroso roller pilot bearings don't require any modification to either the crank or input shafts. They also eliminate premature bearing failure and ensure clean clutch release by maintaining the true alignment of the clutch disc to the flywheel. They're packed with high temperature grease for proper lubrication under extreme high heat conditions, and are suitable for all high performance applications, including drag, oval track/road race, and street.
( 18 )
$29.99
Moroso fuel pump block-off plates are designed to block-off the fuel pump mounting boss when a mechanical fuel pump is not being used. These plates are made of anodized blue aluminum or high-luster triple chrome plated steel.
( 60 )
$20.99
—
$29.99
When good looks are important, Moroso chrome oil filters are the way to go. Outside is a triple process, chrome plated steel housing that's hand-polished and then rack-nickled before chroming to ensure the highest luster possible. Inside is a heat-cured, resin-impregnated element that exceeds OEM specifications for filtration efficiency.
( 23 )
$32.99
—
$35.99
Moroso Performance Products manufactures a complete line of heavy-duty oil pump intermediate shafts. These shafts are made of high-quality steel for extended reliability. The steel sleeve is pinned to maintain correct alignment between the oil pump and the shaft.
( 15 )
$29.99
—
$38.99
Lightweight Moroso fuel pump pushrods feature hardened ends to reduce reciprocating mass, which prevents pump arm float and subsequent fuel starvation. They're ideal for use in drag, Oval Track, and street performance applications.
( 9 )
$31.99
—
$41.99
Moroso oil filter pre-screens are designed to fit between the filter and block. The screens are made of 304 stainless steel, and can trap small particles in the mesh before they reach your engine oil.
( 3 )
$28.99
Moroso oil pan stud kits make pan installation easy and prolong gasket life. Locking nuts feature attached washers with serrated faces to provide a positive grip on the pan rail. The studs are made of heat-treated Grade 8 steel with black oxide finish, and cadmium and zinc plated nuts. These are also available in a bullet nose version which are rounded on one end for easier starting of oil pan mounting nuts.
( 19 )
$28.99
—
$40.99
Moroso oil return screen kits trap metal fragments and loose contaminants before they can cause valvetrain failure, saving you considerable money for repairs on vital engine parts. The kits feature stainless steel screens that fit over the oil drain back holes in the lifter valley, and are held in place with the included epoxy. Depending on the kit your select, oil plug returns may also be included. Moroso oil return screens are available for vehicles spanning six decades.
( 5 )
$33.99
—
$44.99
Moroso solid transmission mounts are steel replacements for your OEM-style soft rubber mount. They eliminate linkage binding, driveline misalignment, and unwanted transmission movement in racing and street performance applications. Constructed from sturdy 3/16 in. steel and finished with a durable chromate or zinc coating, these brackets have pre-drilled holes on top for proper transmission mounting, and threaded nuts welded to the bottom for crossmember mounting. Multiple styles are available for fitment with models from Chevy, GMC, Pontiac, Buick, Oldsmobile, Cadillac, Ford, and Mercury.
( 12 )
$44.99
Moroso offers manifold filler necks in a variety of styles, materials, and finishes—for applications from 1955 and up. These replacements locate the filler at the highest point to bleed off air on cars with low-mount radiators. The filler necks can be located on either the left or right side of the vehicle. They include 1/2 in. NPT fittings for the installation of a water temperature sending unit, and two 1/4 in. NPT fittings for return lines on popular aftermarket cylinder heads.
( 20 )
$43.99
Moroso oil bypass eliminators are designed to eliminate the OEM oil bypass on small block Chevrolet engines. They are manufactured from billet aluminum and are black anodized for protection against corrosion. They will not allow unfiltered oil back into the engine. Whether you are using a stock spin-on type oil filter or running a remote mount oil system, these Moroso oil bypass eliminators will get the job done.
Not Yet Reviewed
$46.40
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
