Availability
Showing In Stock Items. Show All 111 Items.
On Sale
The cap and rotor of any ignition system must be considered maintenance items. Just like when you change the oil and filter in your car, you should always replace your cap and rotor as a set. MSD makes it easy with these cap and rotor replacement kits. The correct rotor is already matched to the correct cap for you.
( 511 )
$49.95
—
$53.75
Summit Racing™ high-output 4-pin HEI performance modules feature a longer dwell time for better coil saturation. This equates to a hotter spark and better performance for your HEI setup.
( 13 )
$55.99
Make sure that you have the right distributor gear for your steel billet roller cam. Our bronze distributor gears from are made from high-quality aluminum bronze alloy and are precision-machined for smooth, reliable operation.
( 11 )
$40.99
On Sale
Simplify your tune-ups and keep them budget-friendly with our Summit Racing™ cap and rotor kits. These affordable kits are molded from premium materials and have brass or aluminum inserts depending on application.
( 372 )
$22.99
—
$54.99
Since you're installing that new distributor, you'll need Summit Racing™ hold down clamps. Dress up your engine compartment while securing your distributor. Made from top-quality materials, they're the perfect way to dress up your engine compartment.
( 103 )
$28.99
Our Summit™ high-output ignition coils give you additional volts of spark energy in a simple, direct replacement package. These coils mount in the stock location with no special mounting needed, but have a lower primary resistance, higher rpm capability, and greater output than stock. They're available in a variety of styles, both universal and application-specific, and can be ordered individually or in sets.
( 369 )
$35.99
—
$36.99
Billet Specialties distributor hold-down clamps are just what you need to hold down your distributor in style. They are the perfect way to give your engine compartment that finishing touch.
( 84 )
$43.95
Failure or poor performance from a coil can result in a misfire, a rough-running, hard-starting engine, and excessive emissions. ACDelco ignition coils provide the performance needed to help keep vehicles running the way that they were designed. These coils have corrosion-protected laminations to guard them from the harsh operating environment. Primary and secondary coil windings often feature molded plastic protection. Order the replacement model designed for your vehicle and engine application.
( 27 )
$35.99
—
$50.99
On Sale
ACCEL SuperStock coils are excellent high-performance coils. They're designed with optimized low resistance and a high turns ratio, for higher energy output. This also results in quicker starts, improved throttle response, and more high-rpm power.
( 92 )
$65.89
$34.49
—
$51.75
Looking to get a faster start, quicker acceleration, and better high-rpm performance from your HEI distributor? You can have it all with Summit Racing™ HEI coils. They deliver increased spark energy--48,000 volts' worth--to give you quicker starts and better acceleration. And special low inductance, high-temperature coil windings charge the coil faster so you'll get increased spark energy at high rpms, too.
( 23 )
$31.99
Replace your worn out, damaged, or missing gear with one of these Crown Automotive distributor gears. They're made from quality materials and built to OEM specifications, ensuring a direct fit. Most of these kits include the distributor and camshaft gear, and are compatible with various Jeep models, in particular.
( 19 )
$23.99
—
$37.99
Your distributor will need upkeep to run at top performance. MSD Street Fire cap and rotor kits can help maintain its optimum operation. Manufactured with brass terminals and a heavy-duty rotor, these MSD kits offer big performance at a not-so-big price. MSD Street Fire cap and rotor kits are available for several GM and Ford applications. So, if you're in a budget frame of mind, choose quality-built MSD Street Fire cap and rotor kits.
( 136 )
$47.77
—
$52.69
Match your camshaft with Summit Racing™ distributor gears. These small, durable replacement gears make a big impact on your engine's performance. They're available in a variety of materials and sizes for applications from the 1950s and up. Order the model recommended for your vehicle.
( 75 )
$23.99
—
$38.99
Keep your distributor from twisting at high rpm with CVR distributor hold-down brackets! These brackets are offered in a choice of anodized finishes and include a stainless mounting stud, nut, and washer. CVR distributor hold-down brackets feature a slotted bolt hole for easy distributor removal.
( 22 )
$32.99
—
$38.99
ACDelco Gold ignition control modules are a high-quality replacement for many vehicles on the road today. They increase the voltage in order for the spark plugs to ignite the air/fuel mixture. The modules feature electronically welded lead connections to help reduce heat stress, failure, or cold joints; and they've been laser-trimmed to provide precise values and reduce deterioration and damage. Gold ignition modules include a copper slug heat sink to help dissipate heat and create a more stable environment. They also feature a large bus bar for added support and conductivity to address the installation and operating forces that stress terminal tabs. Order the model recommended for your application.
( 10 )
$42.99
These MSD advance kits are the same kits that come with your MSD distributor. The kits include the needed components to make your distributor perform like it did when it was brand new.
( 132 )
$53.05
We know you want to get the most out of your ride, so your parts can't just perform--they've got to look good, too. That's why we've manufactured these Summit Racing™ HEI upgrade kits, which feature color-matched components--an industry first! They include an alkyd distributor cap with brass terminal connections, a rotor, a matching coil cover, a cable retention ring, and a high-performance, low-resistance, carbon-to-coil rotor conductor.
( 26 )
$49.99
—
$59.99
Is it time for a tuneup? Replace your distributor's worn-out cap with a new one from Standard Motor Products. Why take chances with old, questionable, or faulty ignition components that can leave you stranded? Standard Motor replacement distributor caps are designed to exceed OEM specifications for dependable, maintenance-free operation. Order the model designed for your specific vehicle application.
( 111 )
$20.99
—
$32.99
These PerTronix vacuum canisters are direct replacements for your Flame-Thrower billet plug and play distributors. You can count on PerTronix to get the best performance out of your ride!
( 12 )
$28.10
MSD puts their years of experience to work in making these top-notch iron distributor gears. Their high grade, ductile iron is micro polished for a smooth and scuff-free finish then Melonite QPC coated to reduce friction and initial wear. Excessive clearance causes timing fluctuation throughout the rpm range, resulting in lost horsepower, so MSD also designed these oversized gears for tighter mesh between the camshaft and distributor drive gears.
( 58 )
$46.09
Looking for a good cap and rotor for your HEI distributor? These Pertronix caps and rotors are made from a high-dielectric, 60 kV-rated alkyd molding compound to minimize crossfire and "arc-thru." They include nylon rotor hold-down screws, a low-resistance coil brush for a more efficient spark, and brass terminals for a long life.
( 11 )
$45.60
—
$46.15
FAST PS20 performance ignition coils feature a special E-core design, which loses less voltage, so more spark gets to your plugs. The coils also have large-gauge wire windings for maximum spark current and voltage, with better heat dissipation at high rpm. An insulated connector and high-tension tower protect against high-voltage arcing. They're also solid-epoxy encapsulated for shock and vibration protection.
( 12 )
$55.95
Need a new cap? Motorcraft has you covered. Their distributor caps are made to OE specs so you know they'll fit.
( 8 )
$23.99
Proform offers these high performance ignition modules for a variety of applications.
( 16 )
$34.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
