Availability
Showing In Stock Items. Show All 37 Items.
Get maximum cooling for the street or track. Edelbrock Victor Series high-volume water pumps are designed for maximum flow and equal coolant distribution in street cars, race cars, tow vehicles, and motor homes. The aluminum pumps have CNC-machined housings with special one-way internal passages that flow more coolant at higher velocities, even at low engine speeds. The CNC-machined impellers are larger than other impellers and have curved vanes that produce greater flow with less cavitation. Other features include heavy-duty roller bearing assemblies built to withstand higher torsional loads, billet steel hubs, leakproof seals, and gaskets. Most Victor Series pumps are available in your choice of satin, black, and polished finishes, or EnduraShine.
( 172 )
$260.95
—
$553.95
Meziere 100 Series electric water pumps deliver 35-40 gpm of flow. Because they're electric, you won't have the usual horsepower loss at high rpm caused by a mechanical pump's impeller. Plus, their lightweight billet aluminum construction reduces overall engine weight. These pumps also feature CNC-machined aluminum housings, epoxy coated motor windings, an RF suppression circuit, and a one-piece, carbon-ceramic seal. They're available for a wide variety of V8 engines, including LT1 and LS1.
( 88 )
$332.18
—
$505.52
These billet electric water pumps from Summit Racing™ allow you to save both weight and horsepower. They're constructed from 6061-T6 billet aluminum, and flow more efficiently than your belt-driven stock pumps. In addition, they only draw 6.1 amps. Hardware and gaskets are included.
( 54 )
$257.99
—
$356.99
CVR Proflo Extreme aluminum electric water pumps provide an outstanding 55 gpm of coolant flow, without sacrificing horsepower! CVR Proflo Extreme water pumps can be mounted on a number of different engines and even in remote locations. These lightweight pumps are CNC-machined from T-6 aluminum and feature a direct-drive motor that draws a minute 6.1 amps. CVR Proflow Extreme water pump assemblies also feature a computer-designed machined billet impeller, a stainless steel shaft, and a carbon ceramic seal that offers a whopping 10,000-hour life expectancy!
( 41 )
$333.99
—
$427.99
These Edelbrock Victor series high-volume water pumps with PermaStar are designed for maximum flow and equal coolant distribution in street cars, racecars, tow vehicles, and motor homes. The aluminum pumps have CNC-machined housings with special one-way internal passages that flow more coolant at higher velocities, even at low engine speeds. The CNC-machined, cast iron impellers are larger than other impellers, and have curved vanes that produce greater flow with less cavitation. Other features include heavy-duty roller bearing assemblies built to withstand higher torsional loads, billet steel hubs, leak-proof seals and gaskets. The PermaStar finish is a high performance coating that gives a super show quality smoked chrome looking finish that will not oxidize or fade and cleans easily.
( 12 )
$365.95
—
$430.95
CVR's Proflo maximum water pumps give you the flow that you need without costing you horsepower. CNC-machined from T6-6061 billet aluminum, these lightweight pumps have a direct-drive 12 V motor that draws a low 6.1 amps. The Proflo maximum water pumps feature a computer-designed machined billet impeller, a stainless steel shaft, and a carbon ceramic seal that offers a 10,000-hour life expectancy. These CVR Proflo maximum water pumps are available in different colors and sizes. The pumps feature a modular design and can be mounted on a number of different engine applications. Amazingly, these pumps can also be mounted in remote locations. Stainless steel fasteners are included. Additionally, the inlet fittings can be changed between the passenger and driver side to suit your radiator outlet. Proflo maximum water pumps are the cooling system components that your ride craves!
( 16 )
$307.99
—
$355.99
Are you tired of failing mechanical water pumps on your high performance engine? No problem--we have come up with these Summit Racing™ electric water pump Pro Packs to get the job done. They include an aluminum electric water pump, a relay, and a wiring harness. The Summit Racing™ electric water pump Pro Packs will decrease engine drag, while increasing overall cooling capacity and reliability.
( 20 )
$290.98
—
$389.98
Moroso billet aluminum OEM mount electric water pumps move up to 21 percent more coolant through the system than any competing pump. They mount in the stock location with stainless steel mounting hardware and work with both 12V and 16V systems. They feature a billet aluminum pump housing and impeller, heavy-duty windings, long-life brushes, a stainless steel shaft, sealed ball bearings, a blue powdercoated outer case, and a high-temperature Viton® seal. They're available for a variety of engines.
( 27 )
$510.99
—
$518.99
Oval Track and road racing are murder on engines, especially when it comes to temperature. A Victor series pump will help your engine stay cool. The aluminum pumps distribute water to both sides of the block equally within 1 percent. That helps prevent hot spots, which can cause detonation and pre-ignition. The Chevy pumps also have auxiliary water outlets for use with custom cooling systems. All pumps have heavy-duty ball/roller bearings, a machined cast iron impeller, gaskets, rear cover .100 in. thicker than stock for durability. The Victor series pumps have a black anodized finish.
( 9 )
$352.95
—
$374.95
Tuff Stuff Performance Platinum Series water pumps are constructed from lightweight aluminum, and are available in both standard- and high-volume flow rates. Choose from among long and short styles, clockwise and counterclockwise rotations, and several quality finishes. These mechanical water pumps are ideal for replacement or upgrade purposes. They're available for a wide variety of vehicle-specific applications.
( 66 )
$256.99
Tuff Stuff Performance Supercool water pumps create 30 percent more flow to help cool engines under abnormal conditions. Ideal for race applications, these pumps are made from high-quality materials, such as aluminum and iron, and are available in a variety of finishes. Options include short and long style; standard and high-volume flow; clockwise and counterclockwise rotation; and different pilot diameters. Whether you're replacing or upgrading, there's a Supercool water pump for your specific vehicle.
( 410 )
$262.99
—
$334.99
On Sale
Frostbite electric water pumps are a must for high performance vehicles where horsepower comes at a premium. They eliminate common issues found in traditional mechanical water pumps--parasitic horsepower loss, heavy cast housings, and impeller drag. Frostbite electric aluminum water pumps are available in black and polished finishes with offerings for popular engine platforms. When it comes to keeping your cooling system performing at peak levels, make it Frostbite! Features include: * Available with cast or billet aluminum housings * Free-up lost horsepower resulting from the use of mechanical pumps * Frostbite logo laser-etched for performance look * Ford applications available with block-off plates * Kits come complete with gaskets, wiring pigtail, and mounting hardware
( 10 )
$349.95
—
$515.95
An upgrade to the Victor series, these Edelbrock Victor Pro Series 2-piece water pumps are designed for high output racing engines, especially dirt late model and circle track applications. They feature a 2-piece cartridge style design for easy maintenance and improved performance. The 2-piece design features improved symmetrical flow paths resulting in increased flow and requiring less horsepower from the engine. A new aggressive impeller with improved inlet and outlet port designs provides maximum cooling with equal distribution making this water pump highly efficient. All of this helps eliminate hot spots in the engine, producing optimum power from every cylinder. Finally, it features a -2 bleeder screw for quick coolant system bleeding.
( 1 )
$457.95
Ford Performance Parts mechanical pumps are available in stock volume and Maximum Flow (high-volume) models. Stock volume pumps have an OEM-spec shaft and bearing with a stamped impeller, and are recommended for engines that operate below 6,000 rpm. Maximum Flow pumps feature heavy-duty ball/roller bearings for long life, a CNC-machined, curved vane impeller and billet hub, and distribute the same amount of coolant to both sides of the engine block. That eliminates hot spots, to help your engine produce maximum power without detonation or pre-ignition.
( 16 )
$297.99
—
$426.99
PRW High Performance mechanical water pumps are engineered to deliver increased water flow faster. These super velocity pumps significantly improve cooling for all street, high performance, and racing applications. The low pressure-injected, A356 aluminum alloy pump bodies are complemented by a precision, high-flow cast iron impeller design. Pressure-balanced water passages equalize flow and minimize engine hot spots at any speed. PRW High Performance mechanical water pumps are excellent alternatives for not only racers, but also trucks, towing, and motorhome applications. Order the model recommended for your specific vehicle and engine size. Features, items, and specs: * 35 gpm at 4,000 rpm with minimal cavitation and proportional increased flow rates at 5,000+ rpm * Aircraft industry tolerances * Heavy-duty 0.75 in. diameter steel shafts * Billet steel hubs and shielded-seal roller ball bearings * Back plate O-ring sealed for most applications * System Basis Chip (SBC) applications include adjustable hardware
( 29 )
$267.71
—
$301.29
EMP Stewart water pumps are the premier choice of professional engine builders, race teams, and performance enthusiasts. They're great for street rodding and OEM replacement applications, and even the most extreme forms of motorsports in the world, including NASCAR Winston Cup and NHRA Pro Stock. These EMP Stewart Stage 4 water pumps are the cutting edge in performance water pump technology. These Stage 4 pumps utilize the Stewart Components DRV-8 impeller. This exclusive 8-vane impeller is fully CNC-machined from 6061-T6 billet aluminum. Its special design flows up to 160 gpm, while consuming less than 3 hp at 4,500 pump rpm. EMP Stewart Stage 4 pumps are the ultimate water pumps for any application!
( 6 )
$289.99
—
$311.99
Top Street Performance high-flow mechanical water pumps provide that extra cooling power your high-performance engine demands, plus they are lightweight and flow at a rate up to 40 percent over stock pumps. All TSP mechanical water pumps are cast from lightweight A356 aluminum and heat-treated to T-6 hardness, which not only provides strength, but aluminum works to manage heat far better than cast iron. Top Street Performance offers these high-flow mechanical water pumps in satin, polished, or chrome finishes. Order the water pump model that is designed to fit your application.
( 18 )
$254.72
PRW Competition+ mechanical water pumps are engineered to deliver a volumetrically increased water flow that will significantly improve cooling system demands for street, high performance, circle track, and endurance racing applications. They are offered in several finishes, including ceramic coated to block excessive heat radiation, and provide superior corrosion resistance and rust protection. Benefits and characteristics of the PRW Competition+ water pumps: * Auxiliary outlets for custom plumbing * Aluminum alloy pump bodies * Precision cast iron impellers * Pressure-balance water passages * Designed to equalize flow and minimize engine hot spots at any speed * Steel hubs and heavy-duty, shielded sealed roller ball bearings * Thicker rear cover for circle track application
( 1 )
$266.52
Mr. Gasket electric water pumps are a great way to free up horsepower and add consistent cooling to high performance engines. They eliminate common issues found in traditional mechanical water pumps, like parasitic horsepower loss, heavy cast iron housings, and impeller drag. Mr. Gasket electric water pumps are offered for popular engine platforms. Order the model recommended for your application, then keep your cool with Mr. Gasket! Features include: * Available in cast and billet aluminum housings * Custom Mr. Gasket logo added to pump for that performance look * Cast applications rated at 35 gpm flow rate, billet applications rated at 40 gpm * Kits come complete with gaskets, wiring pigtail, and mounting hardware
( 1 )
$320.95
March Performance Ultra Series mechanical water pumps are designed to have maximum flow distribution, and for use with factory alternators, power steering brackets, and March Performance brackets. Each one is made with aircraft quality 6061 T-6 billet aluminum, and is incredibly efficient, built for longevity, and carefully crafted to increase the performance of your cooling system. Offered in different pump rotations, styles, and finishes; select the March Ultra Series pump designed for your engine.
( 7 )
$278.90
Proform electric water pumps eliminate unnecessary weight, as well as the impeller-induced drag experienced with mechanical pumps at high rpm. Proform pumps crank out up to 35+ gpm and deliver the cooling that can mean the difference between a win and second place! Made of durable, lightweight diecast aluminum, they're epoxy coated for corrosion resistance, and can be used for competition or street applications. The replacement pumps are available in several size and color options for vehicles from the 1950s and up.
( 102 )
$266.99
—
$317.99
On Sale
Holley cooling manifolds are designed for use with their mid-mount accessary drive systems. These aluminum manifolds are offered with a black, polished, raw, or satin finish. Keeping your vehicle cool is the key to maximum performance. Holley cooling manifolds will help dissipate some of that extra heat.
( 3 )
$449.95
PRW high-flow billet electric water pumps deliver faster, increased flow. With smooth radii and transitions, they equalize flow into both sides of the engine for better cooling. These high-flow billet aluminum electric racing water pumps feature 100 watt motors that draw less than 9 amps on a 12 V system, and continued to flow over 50 gpm in a closed system through PRW's extensive testing. They offer a variety of of styles to match your application and each of them are supplied with gaskets, mounting hardware, and wiring connector. Cross the finish line with confidence using PRW high-flow billet electric water pumps. Additional features include: * Lightweight * Suitable for street or strip * The pump housing and elbows are CNC-machined from high-grade aluminum billets with O-ring seals at each connection * The impeller is a multi-vane, axial design that efficiently pumps the water through the engine with no cavitation * An inlet fitting is supplied with each pump and seals with an O-ring for a secure connection * 3,250 hours of life expectancy—well over 100,000 miles of reliable cooling performance * Pump will clear most timing belt drives and most blower drives * Backplate and fasteners included where applicable
( 4 )
$392.99
—
$413.03
PRW high-flow diecast water pumps will fulfill your cooling needs, without draining horsepower from your engine. They feature heavy-duty motors that turn at approximately 1,500 rpm, draw only 6 to 7 amps, and will flow at 35 gpm. PRW high-flow diecast water pumps are offered for several applications, available in a chrome or black powdercoat finish, and include gaskets, billet aluminum inlet fitting, mounting hardware, pigtail connector, and timing cover block-off plate (where applicable). Additional features: * Lightweight * Suitable for street or strip * 2,750 hours of continuous operation at 176 degrees F * Pump will clear most timing belt drives and most blower drives * Some applications are available with or without backing plates
Not Yet Reviewed
$310.82
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
