Availability
Showing In Stock Items. Show All 80 Items.
Edelbrock Performer RPM Air-Gap intake manifolds incorporate race-winning technology that's been used on Victor Series competition intakes for years. The open air space from the Air-Gap design separates the runners from the heat of the lifter-valley cover. So, the air/fuel mixture stays cooler all the way to the heads, which produces a denser charge for more power. Runners are tuned to move the power band 1,000 rpm higher than Performer Air-Gap manifolds, from idle to 5,500 rpm up to 1,500 to 6,500 rpm.
( 437 )
$374.95
—
$618.95
Edelbrock Performer intake manifolds are low-rise, dual-plane designs with patented runner tuning and a 180 degree firing order that you won't find with the competition. This combination boosts torque over a wide rpm range, from idle to 5,500 rpm. These manifolds also deliver improved throttle response over stock intakes and are available in both EGR and non-EGR style.
( 565 )
$270.95
—
$617.95
Dual-plane Edelbrock Performer EPS intake manifolds deliver dyno-proven horsepower gains from idle to 5,500 rpm, when used with Edelbrock's Performer Series square bore or Thunder Series AVS carburetors. Dyno tests showed an extra 5 hp and 9 lbs.-ft. over their own Performer manifolds. The secret is in the runner design, which is tuned to produce substantial torque increases in the 3,000 to 4,500 rpm range--with peak torque at 3,500 rpm. That's power where you need it the most!
( 312 )
$339.95
—
$575.95
Edelbrock Performer RPM intake manifolds have a high-rise, dual-plane design. They produce incredible top-end horsepower, while retaining good throttle response. Performer RPMs have larger plenums and runners to match the free-flowing exhaust, high-lift cams, and other modifications of a high-output engine. They're intended for high performance street or competition engines that run from 1,500 to 6,500 rpm.
( 221 )
$296.95
—
$571.95
Bolt on some serious performance with these Edelbrock intake manifold combos! The folks at Edelbrock know how to get the most performance out of your car and are here to make things easy for you by packaging one of their legendary intake manifolds with all of the necessary hardware and gaskets to install it in one box. At the heart of these combos is your choice of aluminum intake manifolds that delivers excellent performance at reduced weight compared to your factory manifold. To make installation easy, Edelbrock goes one step further, however, and includes all of the mounting hardware and gaskets required, so you don't have to spend all of your time looking for the small parts. All you have to do is bolt on a compatible carburetor and you are ready to go! Maximize your ride's potential without the headache with these Edelbrock intake manifold combos.
( 23 )
$299.95
—
$484.95
On Sale
Weiand Action Plus intake manifolds are designed for use as stock replacements, with improved power and torque characteristics. They're 180 degree, dual plane types, with a carburetor flange that'll accept either stock or aftermarket performance carburetors. Their effective rpm range runs from idle to 6,000 rpm. With their high-flow runner design and ability to produce increased power with little modification, it's no wonder these manifolds are so popular.
( 63 )
$412.95
$268.95
—
$377.95
Low-profile, single-plane Edelbrock Victor Jr. intake manifolds are very versatile and can be used for drag racing and Oval Track competition, as well as for street applications. Power bands range from 3,500 to 7,000 rpm, on up to 4,500 to 8,000 rpm. There are applications for small block and big block engines, as well as for 2-barrel and 4-barrel carburetors. Some manifolds accept standard restrictor plates and carb adapters.
( 61 )
$425.95
—
$562.95
Summit Racing™ Stage 3 dual-plane intake manifolds are based on our Stage 2 intakes, with the same high-rise design, long separated runners, and 1,500-6,500 rpm powerband. For even more power, we added an open area under the plenum, which provides airflow to keep the fuel/air charge cooler. These intakes are the perfect compliment to your street and strip performance upgrades. The cast-aluminum intakes are CNC-machined for a precise fit, and have a square bore flange and natural finish. Chevrolet intakes will clear HEI ignition systems.
( 70 )
$257.99
Weiand dual plane Stealth intake manifolds feature long, separated runners for bottom-end and mid-range power, plus a special runner design and larger plenum to flow the air needed for high-rpm horsepower. They mount single, square-mount 4-barrels and make power from idle all the way to 6,000 rpm. That makes Stealth manifolds the perfect choice for your street/strip vehicle. Order the size and style needed for your cylinder head application.
( 153 )
$323.95
—
$449.95
Edelbrock Super Victor intake manifolds are arguably the most popular and flexible manifolds in racing today. You'll find these single-plane manifolds on oval tracks, in drag racing, and on NASCAR engines--anywhere that maximum horsepower and torque are needed. The extended, constant cross-sectional area of the runners produces more torque across the midrange--from 3,500 up to 8,500 rpm in most instances. So, they deliver great throttle response off of the corners in oval track racing and improved 60 ft. times in drag racing. Their direct "line-of-sight" flow path provides maximum flow and there's plenty of material for port matching. They're also ideal for alcohol use.
( 53 )
$463.95
—
$562.95
Get maximum performance out of your small block Ford with Trick Flow® R-Series intake manifolds. They deliver substantial power increases in the 3,500-7,500 plus rpm range on heavily modified street/strip and race engines. Plus, they're made from A319 aluminum for lighter weight, have integral bosses for nitrous or fuel injection nozzles, and extra material for custom porting. For use with square bore four barrel carbs.
( 8 )
$411.99
—
$416.99
AFR Eliminator Series intake manifolds are the perfect way to "eliminate" your competition! These cast aluminum performance intakes have a 23-degree manifold configuration. They're designed for standard location intake port cylinder heads. Additional coolant outlets have been added at the rear of the manifold for custom cooling systems. Eliminator intakes can be run "as cast," right out of the box; however, AFR does recommend having the runner exits be "port matched" to your particular cylinder heads for optimal performance. Additional bungs have been cast into the top of the intake runners for EFI injectors or nitrous nozzles. Multiple heights and rpm ranges are available; order the manifold recommended for your application.
( 23 )
$412.65
—
$497.70
On Sale
Weiand Street Warrior intake manifolds are designed for use on stock or stroker combinations and more efficient cylinder heads. With new cam designs came the need for Street Warrior intake manifolds to support these combinations. Designed with Computational Fluid Dynamics software, Street Warrior intake manifolds rise to the challenge and deliver the performance to conquer the competition. Do you want maximum horsepower and torque from today's engines? Then choose Street Warrior intake manifolds.
( 139 )
$424.95
$276.95
—
$499.95
AFR Magnum Series intake manifolds elevate your big block Chevy engine's power—the ultimate power upgrade. Crafted with precision and engineered to perfection, these manifolds are the key to unlocking a new level of performance for your street vehicle. Designed to seamlessly integrate with AFR's acclaimed Magnum Oval port cylinder heads, the manifolds promise a hassle-free enhancement to your engine's capabilities. Say goodbye to the painstaking task of port matching, as they're a direct bolt-on solution for AFR select cylinder heads. The Magnum intake manifold utilizes a dual-plane design, featuring runners that are custom-tailored for high-horsepower applications thriving in the 1,800-6,200 rpm range. Elevate your driving experience today with an AFR Magnum intake manifold—where power meets precision. Product specs: * Carb flange height: front: 5.22 in., middle: 5.39 in., rear: 5.57 in. * 1,800-6,200 rpm optimal operating range * Designed for a standard/stock block height * 4150 carburetor flange
( 2 )
$348.60
Edelbrock's Torker II intake manifolds feature a single-plane, low-rise design that can give you top-end horsepower without affecting the mid-range. What Edelbrock did was increase the plenum volume and alter the short-side radius of the runners, to give the air/fuel charge a straight shot at the intake valves. That straight shot produces a potent power build from 2,500 to 6,500 rpm.
( 52 )
$281.95
—
$497.95
Performer Air-Gap intake manifolds incorporate technology from Edelbrock's potent Victor series manifolds, with an air-gap design feature for ultimate street performance from idle to 5,500 rpm. The air-gap is an open air space which separates the runners from the hot lifter-valley cover. This results in a cooler, denser charge, meaning more power and excellent throttle response throughout the power band. Order the Edelbrock Performer Air-Gap intake manifold best suited for your application.
( 31 )
$395.95
—
$530.95
What's tall, good-looking, and makes tons of power? Trick Flow's® R-Series intake manifold for Mopar 440! Trick Flow® engineers went to work when customers requested an ultra-performance intake manifold for large cubic inch, high-horsepower, big block Mopar engines. The key to the manifold's high-power production is the CAD-optimized, one-piece single plane runner design with a large open plenum—paying special attention to smooth airflow for equal air and fuel distribution. Nitrous users will be happy to find integral bosses that can be drilled and tapped for nozzles, while all engine builders will be glad that Trick Flow® left material around the port openings so the manifold can be port matched and/or fully ported. To keep weight as low as possible, the R-Series intake manifold is made from lightweight yet strong cast aluminum. When it comes to carburetion, you'll find that Trick Flow® machined on a Holley 4500 Dominator mounting flange for maximum performance potential. Designed to produce maximum power with Trick Flow's® PowerPort 270 cylinder heads on 440-based engines working in the 3,500-7,500 plus RPM range, the R-Series intake manifold also performs extremely well with other brand cylinder heads using 270cc and larger intake ports.
( 3 )
$524.99
Trick Flow's R Series Intake Manifold is tailored around big cubic inch small block engines producing 600+ horsepower in the 3,500-7,500+ RPM range. Engineers at Trick Flow optimized the R Series intake for their Super 23® 230cc cylinder heads, but found it also performs extremely well on Trick Flow's Super 23® 215cc cylinder heads as well as other brand heads with 215cc and larger ports. The secret to the manifold's success is its CAD-optimized plenum and runner design. Trick Flow engineers incorporated a one-piece single plane, spider type design with a raised floor and a large open plenum, paying special attention to smooth airflow for equalized air and fuel distribution. The design was optimized to eliminate excess material where possible, but enough was left around the port openings so the manifold can be port matched and/or fully ported. Casting it in A319 aluminum keeps the weight low, and integral bosses cast into each runner can be drilled and tapped to accept nozzles for nitrous applications. To back up all the engineering and great features, Trick Flow dyno tested the R Series Intake Manifold to ensure it can propel you to the front of the pack!
( 4 )
$449.99
On Sale
Revolutionize the way your engine performs with power-boosting Weiand Track Warrior intake manifolds! Designed for high performance engine applications, they are ideal for mean street machines as well as for competition super-class big block powerplants. They are computer engineered and dyno-proven to produce more horsepower and torque as a result of superior cylinder-to-cylinder distribution, giving the Track Warriors the edge over the competition and ensures safe, consistent air/fuel ratios for your engine. Plus, permanent mold castings provide weight savings of 10 to 20 percent over traditional sand cast pieces while maintaining inform wall thickness for porting. So, when you look for the pinnacle of performance, price and quality, just look to Weiand.
( 26 )
$549.95
$302.95
—
$499.95
Our Summit Racing™ Stage 2 cast aluminum, dual-plane intake manifolds have a high-rise design with long, separated runners to deliver power gains in the 1,500-6,500 rpm range. They're a great addition to performance heads! These non-EGR manifolds have a square bore flange and a natural finish. Chevrolet intakes will clear HEI ignition systems.
( 57 )
$389.99
Trick Flow® Track Heat® intake manifolds are precision CNC-machined from A319 aluminum to reduce weight and give your small block Mopar engine more power. The manifold's one-piece spider-type design with extended high-flow runners and raised plenum floor provide significant increases between 3,000 to 7,000 rpm--right where it's needed the most. Trick Flow also provided extra material around the port openings for custom port matching and added bosses that can be drilled for nitrous nozzles. Any 4150-style square bore carburetor bolts up to the Track Heat intake, and with a carburetor mounting pad height of 5.125 in., the manifold should fit under most hoods.
( 5 )
$466.99
Holley Strip Dominator intake manifolds are classics that have been making power for Chevys for almost as long as Holley has been making carburetors. They're proven power builders, engineered to achieve maximum performance. Their single plane design, with a deep, open plenum and isolated runners, produces good power from 4,500 rpm to 7,600 rpm for small blocks, and up to 8,500 rpm on big blocks. There is no exhaust heat crossover.
( 35 )
$370.95
—
$471.95
Edelbrock Victor Jr. EFI intake manifolds make it simple to convert competition engines to electronic fuel injection. They have injector bosses precisely positioned and machined for excellent fuel spray patterns and maximum power. These manifolds are designed to replace the stock mono blade throttle bodies and give you throttle body options; fuel rail set, fuel injectors, fuel pump, and regulator are all required (each sold separately). If you decide not to maintain your EFI setup, you can also use these Victor Jr. EFI intake manifolds to convert to a carburetor.
( 10 )
$510.95
—
$562.95
Tear up the track with a Trick Flow® Track Heat® intake manifold! These aluminum dual plane manifolds feature a one-piece spider-type design with extended, high-flow runners and a raised plenum floor for more horsepower and torque. Other highlights include A319 aluminum construction, integral bosses for nitrous nozzles, and extra material for custom porting. These intake manifolds deliver peak power in the in the 3,000 to 7,000 rpm range and work with all square bore-style carburetors.
( 17 )
$499.99
—
$524.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
