Availability
Showing In Stock Items. Show All 14 Items.
On Sale
You definitely know when your power steering pump fails--turning the wheel becomes a muscle-building chore. Racing Automotive Group power steering pump kits offer a solution. Designed for use with steering quickeners, the pumps produce up to a 1,300 psi at the recommended pump rpm range, feature lightweight aluminum construction, and are packaged with either a V-belt or serpentine pulley kit, deluxe head mounting kits, and aluminum remote reservoir. Select the kit needed for your vehicle. Aluminum P/S pump features: * Includes black anodize aluminum pulley -- 6-groove serpentine -- V-belt * Provides smooth, consistent steering feel * Rated at 3 gpm and produces up to 1,300 psi -- Recommended pump range of 1500 to 6500 rpm * Includes a -6 AN pressure and a -6 AN return fittings Remote reservoir with mounting bracket features: * All aluminum, fabricated construction, plain finish * 9 in. overall height, 3.5 in. overall diameter * 1.5 lbs. * Complete with -6 AN inlet and -10 AN outlet * Includes vented cap * Vertical mount * Not internally baffled -- Connect this reservoir using 3/8 in. (6 AN) hose -- Use rubber hose and push-lock fittings or braided stainless steel lines Deluxe head mount bracket features: * Kit provides proper installation of the Type II-style power steering pump to most SBC applications with short-style water pump * Bracket kit includes: -- Bracket to engine -- Pump to bracket -- Mounting hardware * Head mount locates the pump to the driver's side cylinder head
Not Yet Reviewed
$229.99
$206.99
On Sale
Holley C10 steering shaft kits replace a worn stock unit on your 3rd generation GM C10 truck or with an engine swap where additional clearance may be needed. Offered in two styles for early or later trucks, both versions feature sturdy DD-style steel shafts and dual U-joints with plenty of adjustability for your project to ensure everything is exact and safe. Choose the proper C10 steering shaft for your year truck. Features: * Complete bolt-on solution with little or no modifications necessary depending on use * Eliminates factory rag joint providing a precise and responsive steering input * Will also work as a factory replacement steering shaft * E-coat for maximum protection against corrosion * Steel construction with retaining screws on the bearing caps for strength and durability
( 1 )
$213.95
$139.95
On Sale
These Tuff Country radius arm brackets are constructed from high-quality steel. You can count on Tuff Country for the parts that you need to maintain accurate steering on your lifted vehicle.
( 3 )
$208.99
$188.09
On Sale
Tuff Country EZ-Ride leaf springs are tapered, snub-rolled, and preset for the most comfortable ride available in lifted, positive-arch leaf springs. PTFE inserts are also used to help with ride characteristics as well as to reduce squeaking. Heavy-duty applications are also available to help accommodate a winch or for heavy towing applications. Tuff Country is the originator of the 3 and 4-leaf EZ-Ride leaf springs. Tuff Country's research has proven that using thicker steel per leaf and fewer leafs results in a much smoother ride than using the standard thinner steel and more leafs.
( 13 )
$200.99
—
$262.99
$180.89
—
$236.69
On Sale
Hooker LS engine swap transmission crossmembers are built to mount the transmission in place when switching to an LS engine. They are designed using CAD modeling/FEA analysis for optimal fitment, strength, weight, safety, and appearance. The crossmembers are manufactured from high-strength, low-alloy steel and then black powdercoated for maximum durability. They provide an engineered 3 to 3.5 degree engine/transmission inclination angle that is critical to obtaining suitable U-joint working angles. They are designed to be used in conjunction with Hooker LS engine swap brackets to provide a bolt-in installation of Hooker LS swap manifolds, headers, and exhaust systems for this application.
( 42 )
$380.95
—
$399.95
$219.95
—
$247.95
On Sale
Hooker Blackheart transmission crossmembers provide easy installation for a variety of engine and transmission swap combinations. Manufactured from steel with a black powdercoat, these crossmembers are designed to be used with Blackheart engine adapter plates for a trouble-free LS, LT, Hemi, Coyote, etc. engine swap. Order the model recommended for your vehicle. Blackheart crossmember features: * Comprehensively designed as an integral part of the complete Hooker swap system, providing maximum level of inter-component compatibility * Designed specifically for use with Hooker engine adapter plates * High-arch exhaust passages provide maximum available exhaust ground clearance * Design geometry replicates stock drivetrain height, inclination angle, and offset for optimized vehicle and component compatibility * High-strength/low alloy steel construction provides desirable balance of strength, stiffness, weight, and cost * Powdercoat finish provides attractive, corrosion-resistant appearance * Provide bolt-in compatibility with Hooker/Holley engine mounts, swap headers, exhaust systems, and oil pans * Hardware included
( 27 )
$285.95
—
$299.95
$164.95
—
$185.95
On Sale
Tuff Country Add-A-Leafs are an economical method of lifting vehicles that have leaf springs. These Add-A-Leafs are designed be added to existing stock leaf springs to give a small amount of additional height or lift to your vehicle and gain additional payload capacity. Center pins are included with all kits.
( 76 )
$115.99
—
$122.99
$104.39
—
$110.69
On Sale
Hooker Blackheart engine mount brackets are designed to bolt right in for ease of installation, provide excellent ground clearance, and optimize driveline angles, making your swap a good fit. The mounts are fabricated from steel to provide a strong and rigid foundation for your engine.
( 2 )
$280.95
$154.95
On Sale
Add an aggressive stance and appearance to your ride with REKUDO performance lowering spring sets. Their progressive spring design will drop the vehicle approximately one inch on both the front and rear for a lower center of gravity and improved handling. The REKUDO lowering springs designed for your application also save you money by working with the factory struts! More product features include: * Reduces/closes unsightly wheel opening gaps * Progressive spring design offers a slightly firmer ride vs. the originals for a sporty feel * Complete set of four coil springs for front and rear of the vehicle * Durable finish
( 2 )
$299.95
$164.95
On Sale
Tuff Country traction bars are lighter-duty alternatives to ladder bars. They help to reduce axle wrap or hop, providing increased traction and acceleration by keeping your tires in contact with the road.
( 20 )
$166.99
—
$174.99
$150.29
—
$157.49
On Sale
REKUDO front sway bars are suitable for street driving, autocross, and weekend warrior track days. Their sturdy diameter cuts body roll and stiffens up the front suspension. Polyurethane frame and end link bushings are used as an upgrade from rubber, offering superior durability and function. Polyurethane bushings allow the bar to come into action immediately—unlike rubber bushings that must compress first before the bar becomes functional. And there's no need for concerns about polyurethane squeaking; the frame bushings are easily greaseable via Zerk fittings in the bushing frame brackets. Order the model recommended for your vehicle. Additional details: * Cold rolled carbon steel construction * Tubular design to reduce weight * Utilizes stock mounting points for factory-like fitment * Durable black powdercoat finish * Hardware included
( 1 )
$294.95
$162.95
On Sale
REKUDO offers front control arm Delrin© bushings for a variety of vehicles, including many Chevy Camaros and Pontiac Firebirds from the 1970s and '80s. The hard-plastic bushings don't deflect and are self-lubricated with PTFE for long-term, maintenance-free use. Smooth operation of the control arms provides more consistent and predictable handling. Each kit includes replacement Delrin© bushings, inner and outer steel sleeves (fits REKUDO and factory stamped steel control arms). The bushings are ideal for use in street performance, drag racing, track days, and autocross applications. Notes: * Includes extra components to cover both early and late 2nd Gen Camaro and Firebird applications * Long service life; bushings do not deteriorate, bind or squeak (as they age)
Not Yet Reviewed
$306.95
$168.95
On Sale
Tuff Country's EZ-Ride heavy-duty leaf springs are tapered, snub-rolled, and preset for the most comfortable ride available in lifted, positive-arch leaf springs. They provide you with the quality lift that you're looking for without the harsh ride. They're available for a variety of applications.
Not Yet Reviewed
$277.99
$250.19
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
