Availability
BluePrint Engines Ford 302 c.i.d. 361 HP dressed long block crate engines are ideal for daily drivers and cruising. Fully dressed, these engines makes up to 16 in. of vacuum and will work excellent with power brakes, stock torque converter, stock gearing, and run on 87 octane fuel. Details and specs: * 361 hp/334 lbs.-ft. * Compression Ratio: 9.4:1 * Aluminum heads * Hydraulic roller cam * Cast iron crankshaft * Hypereutectic pistons Block: * New BluePrint cast iron block * 4-bolt main * 4.000 in. bore * One-piece rear main seal * Mechanical fuel pump provision Rotating Assembly: * 3.000 in. stroke * OEM type 5.090 in connecting rods * Hypereutectic pistons * 50oz external balance Cylinder Heads: * BluePrint aluminum cylinder heads (HP9008) * 60cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 190cc intake/60cc exhaust runners Roller Cam specs: * .533 intake/.544 exhaust * 215 intake/220 exhaust duration @ .050 - 114-degree lobe separation Ignition timing: * 10-16 degrees initial, 32-34 total Also includes (depending on part number): * Valve covers * Timing cover * Carburetor or Throttle Body * Spark plugs and wires * Distributor * Intake * Harmonic balancer * Dyno test results shipped with engine Note: Engine requires a V-belt standard rotation water pump and belt system. Timing cover is designed for standard rotation water pump only.
( 9 )
$6,649.00
—
$10,199.00
If huge horsepower is what you are searching for, AFR 357cc Magnum aluminum cylinder heads will certainly deliver. With AFR's fully CNC-ported 357cc heads flowing 425 cfm, they represent the ultimate in airflow for your big block Chevrolet. These cylinder heads were targeted at larger cu. in. engines (509-632 c.i.d.) looking for maximum horsepower and rpm capabilities with a primary operating range of 3,500-8,000 rpm (this range is an average and will vary with engine displacement and component selection). These aluminum heads also provide impressive torque figures at higher rpm levels. Blown, turbo, and nitrous engines will especially like the larger, higher flowing intake ports. AFR 357cc Magnum BBC cylinder heads will work best with camshafts exceeding 0.750 in. gross valve lift to make better use of the substantial airflow found in the higher lift range. The AFR 357cc heads come standard with AFR's trademark 3/4 in. thick cylinder head deck, reinforced rocker stud bosses, and premium one-piece stainless steel 2.300 in. intake and 1.880 in. exhaust valves. The AFR's fully CNC-ported 357 heads come with a 121cc chamber and are available with an optional 114cc combustion chamber as well. Order the cylinder head model suited to your needs.
Not Yet Reviewed
$5,184.90
BluePrint Engines 302 c.i.d. Cruiser base crate engines make an excellent choice for daily drivers and cruising. These crate engines make up to 16 inches of vacuum and are designed to work great with power brakes, stock torque converter, stock gearing, and run great on 87 octane fuel. Details and specs: * 361 hp/334 lbs.-ft. * Compression ratio: 9.4:1 * Aluminum heads * Hydraulic roller cam * Cast iron crankshaft * Hypereutectic pistons Block: * New BluePrint cast iron block * 4-bolt main * 4.000 in. bore * One-piece rear main seal * Mechanical fuel pump provision Rotating Assembly: * Cast iron crankshaft * 3.00 in. stroke * OEM 5.090 in. connecting rods * Hypereutectic pistons * 50oz external engine balance Cylinder heads: * BluePrint aluminum cylinder heads (HP9008) * 60cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 190cc intake/60cc exhaust runners Roller Cam specs: * .533 intake/.544 exhaust * 215 intake/220 exhaust duration @ .050 - 114-degree lobe separation Ignition timing: * 10-16 degrees initial with 32-34 degrees total Also includes: * Valve covers * Oil pan * Timing cover * Dyno tested results shipped with engine
Not Yet Reviewed
$6,049.00
The Edelbrock Power Package concept is second to none. To make things easier in parts selection, Edelbrock has taken the guesswork out of top-end component selection by actually placing the power package components together in complete kits. They include almost everything you need to make serious horsepower. These kits are available with different cams, intakes, and heads to deliver the torque and horsepower you're looking for. Horsepower output will vary depending on combinations of accessories used.
( 7 )
$5,128.95
These Summit Racing™ top end Pro Packs are guaranteed to give your engine a shot in the arm. We have taken out the guesswork and matched up all of these components for maximum bolt-on power, right out of the box. Get one of these Summit Racing™ top end Pro Packs and put your motor on track for some serious horsepower. Features include: * Pair of cylinder heads that will outflow your stock heads * Head bolts * Intake manifold * Intake gaskets * Intake bolts
( 1 )
$6,972.87
Edelbrock Power Package concept is second to none. To make things easier in parts selection, Edelbrock has taken the guesswork out of top-end component selection by actually placing the power package components together in complete kits. They include almost everything you need to make serious horsepower. These kits are available with different cams, intakes, and heads to deliver the torque and horsepower you're looking for. Horsepower output will vary depending on combinations of accessories used.
( 18 )
$5,598.95
If you're looking for serious street/strip performance from your one-of-a-kind custom vehicle, then these Trick Flow® PowerOval® 280 Fast As Cast® top-end engine kits for big block Chevrolet engines are just what the doctor ordered. Featuring Trick Flow® PowerOval® 280 heads with 113cc combustion chambers, these top-end engine kits were designed to give your engine the best possible components for excellent low and midrange torque and horsepower. For serious pavement-pounding power, choose these Trick Flow® PowerOval® 280 Fast As Cast® top-end engine kits for big block Chevrolet. Top end kits include: * 2 Trick Flow® PowerOval® 280 cylinder heads * Trick Flow® Track Max® hydraulic roller camshaft with 0.600 in. of intake and exhaust valve lift * Hydraulic roller lifters * Chromoly pushrods * Roller rocker arms with a 1.7 ratio * Billet steel timing set * Cylinder head bolts * Gasket set
( 3 )
$5,020.90
Carefully tuned by Trick Flow® engineers to deliver optimum horsepower and torque on a big block Mopar 440, these PowerPort top-end engine kits save you cash and take the guesswork out of designing a winning engine combo. Each kit is built around a set of dyno-proven PowerPort 240 cylinder heads and includes a Track Max® hydraulic roller camshaft, a Track Heat® intake manifold, 1.6 ratio roller rocker arms with shafts and hold-down bolts, MLS head gaskets, a cylinder head bolt kit, and an intake gasket set with valley pan.
Not Yet Reviewed
$5,379.90
BluePrint Engines Ford 302 c.i.d. 361 HP EFI dressed long block crate engines are ideal for daily drivers and cruising. Fully dressed, these engines makes up to 16 in. of vacuum and will work excellent with power brakes, stock torque converter, stock gearing, and run on 87 octane fuel. Details and specs: * 361 hp/334 lbs.-ft. * Compression Ratio: 9.4:1 * Aluminum heads * Hydraulic roller cam * Cast iron crankshaft * Hypereutectic pistons Block: * New BluePrint cast iron block * 4-bolt main * 4.000 in. bore * One-piece rear main seal * Mechanical fuel pump provision Rotating Assembly: * 3.000 in. stroke * OEM type 5.090 in connecting rods * Hypereutectic pistons * 50oz external balance Cylinder Heads: * BluePrint aluminum cylinder heads (HP9008) * 60cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 190cc intake/60cc exhaust runners Roller Cam specs: * .533 intake/.544 exhaust * 215 intake/220 exhaust duration @ .050 - 114-degree lobe separation Ignition timing: * 10-16 degrees initial, 32-34 total Also includes: * Front sump oil pan * Valve covers * Timing cover * EFI * Standard rotation water pump * Spark plugs and wires * Distributor * Intake * Harmonic balancer * Dyno test results shipped with engine
Not Yet Reviewed
$10,099.00
—
$10,199.00
The Edelbrock Power Package concept is second to none. To make things easier in parts selection, Edelbrock has taken the guesswork out of top-end component selection by actually placing the power package components together in complete kits. They include almost everything you need to make serious horsepower. These kits are available with different cams, intakes, and heads to deliver the torque and horsepower you're looking for. Horsepower output will vary depending on combinations of accessories used.
Not Yet Reviewed
$5,011.95
BluePrint Engines GM 383 c.i.d. 410 hp stoker dressed long blocks with aluminum heads are great choices for those who demand a drivable, reliable high performance engine. All small block Chevy 383 rotating assemblies are balanced within 2 grams on a state-of-the-art computerized balancer. In addition, each engine is dyno-tested and is then shipped with a documentation of the engine's high performance power curve. Key features and parts may include: * Handpicked seasoned block * Square and parallel decked * Align-honed main bearing bore * Cylinders honed on computer controlled machine to within .0002 straightness and roundness * Cylinders are sonic tested for thickness * Passenger side dipstick * Drilled and tapped for clutch linkage * BluePrint cast steel crankshaft * OEM-type connecting rods with 150,000 psi bolts * Hypereutectic pistons * Aluminum cylinder heads * Hydraulic roller camshaft * Valve covers * Oil pan and timing cover * HEI distributor * Carburetor * Aluminum intake manifold * BluePrint Engines 30 month/50,000 mile warranty
( 5 )
$6,849.00
BluePrint Engines 350 c.i.d. Cruiser fully dressed crate engines make an great choice for daily drivers and cruising. These fully dressed engines make up to 18 in. of vacuum and work excellent with power brakes, stock torque converter and stock gearing and they will run on 87 octane fuel. Details and specs: * 341 hp/371 lbs.-ft. * Compression Ratio: 9.2:1 * Aluminum heads * Hydraulic roller cam * Cast iron crankshaft * Hypereutectic pistons Block: * New BluePrint cast iron block * 4-bolt main * 4.000 in. bore * One-piece rear main seal * Mechanical fuel pump provision * Passenger side dipstick * Drilled and tapped for clutch linkage Rotating Assembly: * Cast iron crankshaft * 3.480 in. stroke * Forged 5.700 in. connecting rods * Hypereutectic pistons * Internal front/external rear engine balance Cylinder Heads: * BluePrint aluminum cylinder heads (H8002K) * 64cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 195cc intake/75cc exhaust runners Roller Cam specs: * .477 intake/.471 exhaust * 202 intake/212 exhaust duration @ .050 - 115-degree lobe separation Ignition timing: * 32 degrees total at 3,500 rpm Also includes: * Valve covers * Harmonic balancer * Spark plugs * Spark plug wires * Standard rotation long style water pump * Waterneck and thermostat * Fuel pump * Oil pan * Timing cover * Aluminum intake * HEI distributor * 600 cfm carburetor * Dyno test results shipped with engine
( 28 )
$5,949.00
—
$7,899.00
BluePrint Engines GM 350 C.I.D. 390 HP Long Block crate engines deliver 390 hp and 410 lbs.-ft. of torque. They feature aluminum heads, hydraulic roller cam, cast iron crankshaft, hypereutectic pistons, and a compression ratio of 9.2:1. Additional specifications include: * BLOCK: NEW BluePrint Cast Iron Block Manufactured and Machined in the USA 4-Bolt Main 4.000 in. Bore 1-Piece Rear Main Seal Mech fuel pump provision: Yes Passenger Side Dipstick Drilled and tapped for clutch linkage * ROTATING ASSEMBLY: Cast Iron Crankshaft 3.480 in. Stroke Forged 5.700 in. connecting rods Hypereutectic pistons Internal Front/ External Rear engine balance * CYLINDER HEADS: BluePrint Aluminum Cylinder Heads 64cc chamber 2.02 in. intake/1.60 in. exhaust valves 195cc intake/75cc exhaust runners * CAM SPECS: Cam Type: Roller .495 Intake .502 Exhaust 220 Intake / 224 Exhaust duration @ .050 - 114 degree lobe separation * IGNITION TIMING: 32 Degrees Total at 3,500 rpm * ALSO INCLUDES: Valve covers Oil pan Timing cover Dyno test results shipped with engine 30 month / 50,000 mile warranty
( 12 )
$5,049.00
Dressed for high performance, BluePrint Engines GM 400 c.i.d. 500 hp long block crate engines are not your grandpa's 400! Built by skilled craftsmen, these blocks are assembled with ignition and carburetor, as well as valve covers, oil pan, and timing cover. The most complete crate engine available, they offer you fast, easy installation. And because they're dyno-tested, you can be sure all the components will work together perfectly! BluePrint's GM 400 c.i.d. 500 hp dressed engines feature: * Cast iron block with 4-bolt mains * Compression ratio: 10.3:1 * Forged crankshaft * 5.7 in. connecting rods * 150,000 psi rod bolts * Forged pistons * Hydraulic roller cam * BluePrint aluminum heads with 64cc chamber * Intake manifold dual plane, satin aluminum * Carburetor * Dyno test results shipped with engine * 30-month/50,000-mile warranty
( 11 )
$8,399.00
—
$10,349.00
BluePrint Engines GM 383 c.i.d. 436 hp dressed stroker long block crate engines with fuel injection will provide you a great foundation to return your vehicle to the performance level you desire. They feature a new one-piece rear main BluePrint engine block with 4-bolt mains and passenger side dipstick. Inside the block is a cast crankshaft and connecting rod rotating assembly, with 10.1:1 compression hypereutectic pistons hung on the end. The full roller camshaft provides .544 intake/555 exhaust Lift with 230 intake/236 exhaust Duration at .050 with a 110 degree lobe separation. Up top is a dual-plane intake manifold with Holley Sniper fuel injection system The engines also include an oil pan, a set of valve covers, and a timing cover to finish them off.
( 10 )
$10,049.00
The Edelbrock Power Package concept is second to none. To make things easier in parts selection, Edelbrock has taken the guesswork out of top-end component selection by actually placing the power package components together in complete kits. They include almost everything you need to make serious horsepower. These kits are available with different cams, intakes, and heads to deliver the torque and horsepower you're looking for. Horsepower output will vary depending on combinations of accessories used.
Not Yet Reviewed
$5,680.95
Edelbrock Power Package concept is second to none. To make things easier in parts selection, Edelbrock has taken the guesswork out of top-end component selection by actually placing the power package components together in complete kits. They include almost everything you need to make serious horsepower. These kits are available with different cams, intakes, and heads to deliver the torque and horsepower you're looking for. Horsepower output will vary depending on combinations of accessories used.
Not Yet Reviewed
$8,580.95
Complete your perfect build with a BluePrint 350 c.i.d. Cruiser fully dressed crate engine with fuel injection. The engine makes up to 18 in. of vacuum and works with power brakes, stock torque converter, stock gearing--and runs great on 87 octane fuel, which makes it excellent for daily drivers and cruising! Three models are available; compare options and select the engine that best fits your needs. Details and specs: * 341 hp / 371 lbs.-ft. * Compression ratio: 9.0:1 * Aluminum heads * Hydraulic roller cam * Cast iron crankshaft * Hypereutectic pistons Block: * New BluePrint cast iron block * 4-bolt main * 4.000 in. bore * One-piece rear main seal * Mechanical fuel pump provision * Passenger side dipstick * Drilled and tapped for clutch linkage Rotating assembly: * Cast iron crankshaft * 3.480 in. stroke * Forged 5.700 in. connecting rods * Hypereutectic pistons * Internal front / external rear engine balance Cylinder Heads: * BluePrint aluminum cylinder heads (H8002K) * 64cc chamber * 2.02 in. intake / 1.60 in. exhaust valves * 195cc intake / 75cc exhaust runners Cam specs: * .477 intake / .471 exhaust * 202 intake / 212 exhaust duration @ .050 - 115-degree lobe separation Ignition timing: * 32 degrees total at 3,500 rpm Also includes: * Valve covers * Oil pan * Timing cover * Aluminum intake * HEI distributor * EFI system * Dyno test results shipped with engine
( 4 )
$6,549.00
—
$8,949.00
BluePrint Engines 350 c.i.d. Cruiser base crate engines make an excellent choice for daily drivers and cruising. These crate engines make up to 18 inches of vacuum and are designed to work great with power brakes, stock torque converter, stock gearing, and run great on 87 octane fuel. Details and specs: * 341 hp/371 lbs.-ft. * Compression ratio: 9.0:1 * Aluminum heads * Hydraulic roller cam * Cast iron crankshaft * Hypereutectic pistons Block: * New BluePrint cast iron block * 4-bolt main * 4.000 in. bore * One-piece rear main seal * Mechanical fuel pump provision * Passenger side dipstick * Drilled and tapped for clutch linkage Rotating Assembly: * Cast iron crankshaft * 3.480 in. stroke * Forged 5.700 in. connecting rods * Hypereutectic pistons * Internal front/external rear engine balance Cylinder heads: * BluePrint aluminum cylinder heads (H8002K) * 64cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 195cc intake/75cc exhaust runners Roller Cam specs: * .477 intake/.471 exhaust * 202 intake/212 exhaust duration @ .050 - 115-degree lobe separation Ignition timing: * 32 degrees total at 3,500 rpm Also includes: * Valve covers * Oil pan * Timing cover • Aluminum intake manifold * HEI distributor • 600 cfm Carburetor * Dyno tested results shipped with engine
( 19 )
$5,549.00
The Chevrolet Performance 5.7L 350 HO 333 HP Turnkey long block crate engines are assembled with all-new parts and high-flow heads, giving you more power than just about any production-spec small block ever installed at the factory. Designed, engineered, and tested to stringent Chevrolet specifications, these cast-iron blocks with four-bolt main caps is the foundation for the 350 HO, which is topped with iron Vortec heads fitted with 1.94/1.50 in. valves. In addition, durable rotating assembly has aluminum pistons that deliver a 9.0:1 compression ratio. Chevrolet Performance pioneered their high-performance crate engine half a century ago—and they have never stopped working to offer enthusiasts new and more powerful solutions for their projects. You've got a dream in your garage. Chevrolet Performance wants to help you bring it to life. Tech Specs: * Engine Type: Chevy Small-Block V-8 * Displacement (cu. in.): 350 * Bore x Stroke (in.): 4.000 x 3.480 * Block: Cast-iron with four-bolt main caps * Crankshaft: Nodular iron * Connecting Rods: powdered-metal steel * Pistons: cast-aluminum * Camshaft Type: hydraulic flat tappet * Camshaft Lift (in.): .435 intake / .460 exhaust * Camshaft Duration (@.050 in.): 212° intake/222° exhaust * Cylinder Heads: Vortec iron; 64-cc chambers * Valve Size (in.): 1.940 intake/1.500 exhaust * Compression Ratio: 9.0:1 nominal * Rocker Arms: stamped steel * Rocker Arm Ratio: 1.5:1 * Water Pump: cast iron, long-style * Flexplate: 12.750 in. * Recommended Fuel: premium pump * Ignition Timing: 32° Total @ 4,000 rpm * Maximum Recommended RPM: 5100 * External balance
( 1 )
$8,634.77
Satisfy your craving for horsepower with BluePrint 347 c.i.d. 415 hp dressed stroker long block crate engines are meticulously-built Blue Oval engines from a solid, reputable company that does the job right and stands behind their work. BluePrint custom-built crate and stroker performance engines are always balanced and dyno-tested to add a lot of muscle to your fun! Plus, they're shipped with the dyno results so you can see the BluePrint difference! So, where will you get your horsepower from? Block: * New BluePrint cast iron block * Square and parallel decked * Align-honed main bearing bore * Cylinders honed on computer-controlled machine to within .0002 in. straightness and roundness * Cylinders are sonic tested for thickness Rotating assembly: * New cast steel crankshaft * New rods with 150,000 psi bolts * Forged pistons * Moly rings * Balanced rotating assembly * High-volume oil pump * Hydraulic roller camshaft * Heavy-duty, double-roller timing set Cylinder heads: * Aluminum heads * Swirl-polished intake and exhaust valves * Hardened pushrods Plus: * Dual plane, satin aluminum intake manifold * Carburetor * Distributor * Valve covers * Painted oil pan * Brass freeze plugs
( 10 )
$7,949.00
—
$11,499.00
Satisfy your craving for horsepower with BluePrint 347 c.i.d. 415 hp base stroker long block crate engines. They are meticulously-built Blue Oval engines from a solid, reputable company that does the job right and stands behind their work. BluePrint custom-built crate and stroker performance engines are always balanced and dyno-tested to add a lot of muscle to your fun! Plus, they're shipped with the dyno results so you can see the BluePrint difference! So, where will you get your horsepower from? Block: * Square and parallel decked * Align-honed main bearing bore * Cylinders honed on computer-controlled machine to within .0002 in. straightness and roundness * Cylinders are sonic tested for thickness Rotating assembly: * New cast crankshaft * New rods with 150,000 psi bolts * Forged pistons * Moly rings * Balanced rotating assembly * High-volume oil pump * Hydraulic roller camshaft * Heavy-duty, double-roller timing set Cylinder heads: * Aluminum heads * Swirl-polished intake and exhaust valves * Hardened pushrods Plus: * 10 to 1 compression * Valve covers * Painted oil pan * Brass freeze plugs
( 3 )
$7,199.00
BluePrint Builder Series 302W/365HP Bronco Edition EFI crate engine and 4R70W transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Ford small block-compatible 302 (c.i.d.) engine that produces 365 horsepower, this Bronco edition builder series includes a black pulley kit and 4R70W automatic transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 10.0:1 compression ratio, with assistance from the hydraulic roller camshaft, hypereutectic pistons, and steel crankshaft. Altogether, this assembly produces 365 lbs.-ft. of torque. When you need or want a new powertrain for your Ford Bronco, go with the authority in crate engines and their BluePrint Builder Series 302W/365HP Bronco Edition EFI crate engine and 4R70W transmission combos. Other product features, items, and specifications include: Block: * New BluePrint cast iron * Main caps are 4-bolt * Bore is 4.000 in. * One-piece rear main seal Rotating Assembly: * Cast steel crankshaft * Stroke – 3.000 in. (and OEM-style 5.090 in. connecting rods) * Hypereutectic pistons * Externally balanced BPP50 harmonic balancer Cylinder Heads: * BluePrint HP9009 models * Chamber – 60cc * Valves are 2.020 in. intake and 1.600 in. exhaust * Exhaust runners are 190cc intake and 60cc exhaust Camshaft: * Hydraulic roller * Intake valve lift – 0.533 in. * Exhaust valve lift – 0.544 in. * Intake duration at 0.050 in. of lift – 215 * Exhaust duration at 0.050 in. of lift - 220 * Lobe separation angle (LSA) – 114 degrees Ignition Timing * Initial is 10-16 degrees * Will be 34 degrees total at 3,500 rpm * Total is 32-34 degrees * Firing order is 1-3-7-2-6-5-4-8 Complete 4WD-ready 4R70W Transmission (built to 650 horsepower): * Electronic transmission controller and TPS breakout harness for integration with controller * Torque converter with 2,200 – 2,600 rpm stall * Flexplate * Starter * This 4-speed overdrive transmission with lockup is specifically prepped for a 1966-76 Dana 20 transfer case (sold separately) * Gear ratios are 2.84:1 (first), 1.55:1 (second), 1.00:1 (third), 0.70:1 (overdrive), and 2.32:1 (reverse) Other Components: * Dual plane aluminum intake manifold with satin finish * Complete fuel injection system * Distributor * Valve covers * Rear sump oil pan * Billet aluminum front accessory drive with black finish (includes A/C and power steering) * BPP7938 NGK BKR5E spark plugs (0.750 in. reach, 14mm thread pitch, 5/8 in. hex, 0.035 in. gap) Note: Not intended for use in controlled vehicles. Recommended fuel is 91 octane. Recommended oil is non-synthetic 10W30. Not designed for EGR compatibility.
Not Yet Reviewed
$20,199.00
BluePrint Builder Series 347W/415HP Standard Edition EFI crate engine and 4R70W transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Ford small block-compatible 347 (c.i.d.) engine that produces 415 horsepower, this standard edition builder series includes a polished pulley kit and 4R70W automatic transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 10.0:1 compression ratio, with assistance from the hydraulic roller camshaft, forged pistons, and steel crankshaft. Altogether, this assembly produces 415 lbs.-ft. of torque. When you need or want a new powertrain for your Blue Oval ride, go with the authority in crate engines and their BluePrint Builder Series 347W/415HP Standard Edition EFI crate engine and 4R70W transmission combos. Other product features, items, and specifications include: Block: * New BluePrint high-strength cast iron * Increased deck thickness and strength webbing * Priority main oiling * Main caps are 4-bolt * Improved water jacket design * One-piece rear main seal Rotating Assembly: * Cast steel crankshaft * Stroke – 3.400 in. * Forged I-beam 5.400 in. connecting rods * Forged pistons * Externally balanced BPP28 harmonic balancer Cylinder Heads: * BluePrint HP9009 models * Chamber – 60cc * Valves are 2.020 in. intake and 1.600 in. exhaust * Exhaust runners are 190cc intake and 65cc exhaust Camshaft: * Hydraulic roller * Intake valve lift – 0.543 in. * Exhaust valve lift – 0.554 in. * Intake duration at 0.050 in. of lift – 218 * Exhaust duration at 0.050 in. of lift - 226 * Lobe separation angle (LSA) – 112 degrees Ignition Timing * Initial is 10-16 degrees * Will be 34 degrees total at 3,500 rpm * Total is 32-34 degrees * Firing order is 1-3-7-2-6-5-4-8 Complete 4R70W Transmission Package (built to 650 horsepower): * Electronic transmission controller and TPS harness for integration with controller and EFI * Torque converter with 2,200 – 2,600 rpm stall * Flexplate * Starter * This is a 4-speed overdrive transmission with lockup * Gear ratios are 2.84:1 (first), 1.55:1 (second), 1.00:1 (third), 0.70:1 (overdrive), and 2.32:1 (reverse) Other Components: * Dual plane aluminum intake manifold with satin finish * Complete fuel injection system * Pro Billet distributor * Mustang-style valve covers * Oil pan with 7-quart capacity * Complete front accessory drive includes A/C, power steering, alternator, water pump, belts, and pulleys * BPP7938 NGK BKR5E spark plugs (0.750 in. reach, 14mm thread pitch, 5/8 in. hex, 0.035 in. gap) Note: Factory 5 applications are a special order (must call). Recommended fuel is 91 octane. Recommended oil is non-synthetic 10W30. Not designed for EGR compatibility.
Not Yet Reviewed
$20,949.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
