Availability
Showing In Stock Items. Show All 115 Items.
Clearance
These Sealed Power MA Series main bearings can actually polish the journals on your crankshaft. That's because there's a small percentage of silicon mixed in with the aluminum and tin that make up the bearing-surface alloy. The silicon is there for wear resistance, but its toughness actually smoothes the journals of a crank whose surface hasn't been optimized! This special surface alloy is laid over a high-strength 1010 steel backing and delivers improved seizure and corrosion resistance, as well as better control of wall variance. It also helps to minimize debris embedding, which can score the crank's surface.
( 76 )
$82.99
—
$117.99
$53.50
—
$99.50
Clearance
Melling timing chain sets are designed for use with either performance or stock cams. They have a solid-bushing chain for a true bearing surface that rolls with the sprockets, eliminating chain stretch. The crank gears are machined from stress-proof steel. Most Melling timing chain sets have three keyways to ensure accurate timing for early or late model vehicles, and to allow you to set the cam timing at 4 degrees advanced, 4 degrees retarded, or stock. However, 50-state (stock replacement) sets have single keyways. The chains are available in several styles, such as single or double roller, single non-roller, and link belt. Melling timing chain sets are not for use above 6,500 rpm. Order the model designed for your vehicle application.
( 133 )
$123.99
$86.50
Clearance
U.S. Wheel Deuce 455 Series paint-ready wheels allow you to finish your hot rod with the right touch. These steel Deuce 455 series wheels are ready for you to paint or powdercoat whatever color you would like to customize the look of your rod. Tailor a look that's just right for your ride with U.S. Wheel Deuce 455 Series paint-ready wheels.
( 31 )
$147.99
$88.50
Clearance
Vision Street Designs 469 Boost Series gloss black wheels with mirror machined face are sure to make your ride stand out. The 5-spoke wheel design features machined accents outlining each spoke and carries over into the lip of the wheel for an even larger appearance. They include a snap-in center cap with the Vision brand logo. Available in a wide range of diameters, bolt patterns, and offsets, these one-piece aluminum wheels offer a balance of high strength and low weight.
( 3 )
$95.99
$83.50
Clearance
Howards Cams race series vertical bar hydraulic roller lifters offer proprietary hydraulic valving specifically designed for continuous operation to 6,600 rpm with ideal seat pressures between 150-160 lbs. The lifter bodies are fully machined from alloy steel bar stock and are completely micro-polished. The nose wheels are machined from 8620 material and the cases are hardened for durability. Howards Cams race series vertical bar hydraulic roller lifters are fully rebuildable.
( 6 )
$149.99
$99.50
Clearance
Dorman premium chassis drag links have the fit, form, and function of the OE drag links in your vehicle. Installation is a breeze and quality is a guarantee—as is any Dorman Premium Chassis product. These are certain to keep your suspension handling properly and the ride comfortable.
( 1 )
$96.99
$51.50
Clearance
Motive Gear ring and pinion gear installation kits include high-quality components to complete your project. Depending on the axle application, the kits can include: a cover gasket, pinion shims, carrier shims, crush sleeve, pinion seal and nut, and ring gear bolts. Some kits also come with marking compound and a brush. To ensure proper fitment, order the installation kit designed for your specific axle model.
( 48 )
$96.99
—
$235.99
$51.50
—
$81.50
Clearance
Tuff Stuff Performance high-amp output Stealth black alternators are just what every ride needs. These units produce the most power at idle to keep your battery fully charged at all times. Tuff Stuff Performance products are hand-built with the best bearings, diodes, and copper windings available. Stealth black alternators are finished in a powdercoat that's 20 times more durable than ordinary paint and provides a consistent sheen for underhood accessories. They're available in a variety of amperages and case styles for fitment on thousands of specific vehicle applications.
( 351 )
$193.99
$98.50
Clearance
Get an edge in style and performance with Allied 51 Series Daytona black wheels outfitted on your ride. Built with 2-piece steel construction, the 51 Series Daytona wheels feature 10 individual "D" shaped holes and sport a stealth black finish. They are available in a variety of diameters, bolt patterns, backspacing, and offsets.
( 23 )
$115.00
$69.50
Clearance
REACH Cooling offers more than 1,000 radiator models, covering roughly 95 percent of popular automotive and light truck applications. All of their replacement parts are designed to meet or exceed original equipment specifications, ensuring that they will fit and perform just like stock. REACH aluminum radiators are available in crossflow or downflow styles; with numerous inlet/outlet size and location options. Many models also include a transmission cooler. Order the radiator recommended for your vehicle.
( 83 )
$117.99
$87.50
Clearance
There's nothing like a classic! And U.S. Wheel 69 Series Rat Rod bare wheels are a perfect choice to finish yours! These 69 Series steel wheels are ready to complement or accent your hot rod. Your exaggerated, thrown-together jalopy will look totally rad with a set of these, just paint them to match your ride. Don't just complete your Rat Rod--customize it even more with U.S. Wheel 69 Series Rat Rod bare wheels.
( 27 )
$155.99
$73.50
Clearance
Dove Manufacturing offers rocker arm stands for a variety of applications, including many Ford big block engines from the 1950s, '60s, and '70s. The shaft-mounting style center or end stands provide a base and pivot point for the rocker arms, keeping them aligned. Order the set recommended for your setup.
Not Yet Reviewed
$114.99
$79.50
Clearance
ACL Performance offers Race Series rod bearing sets for a wide range of vehicles. These high performance tri-metal engine bearings are designed to withstand higher RPM conditions. They feature a high-strength overlay plate with reduced thickness for improved fatigue properties. Select the crankshaft undersize and quantity recommended for your year/make and engine application. Additional details: * Hardened steel backs on all rod bearings to improve the support of the bearing lining and assist with bearing retention in the housing. * Increased crush for improved bearing retention * Elimination of flash plating on the back of the bearings to improve heat transfer through the bearings and to maximize the grip between the bearings and its housing * Increased eccentricity to compensate for bore distortion at high RPM and to assist in the formation of hydrodynamic oil films * 3/4 in. grooved main bearings to optimize bearing load carrying surface area and oil flow to the conrod bearings * Tight consistent wall tolerances to help you maintain consistent clearances * Enlarged ID chamfers on bearing edges (where required) to accommodate large fillet radius on performance crankshafts
( 8 )
$122.99
—
$145.99
$60.50
—
$72.50
Clearance
Perfection MU Series clutches are OEM replacement clutch kits that provide more grip without the stiff pedal of most aftermarket clutches. Features may include: * New OEM computer-tested pressure plate * OEM-style clutch disc with non-asbestos facings built to exceed the OEM specs * New release bearing on some applications * Pilot bearing/bushing * Alignment tool for the perfect clutch installation
( 2 )
$108.99
$80.50
Clearance
Agility Auto Parts offers a complete line of automotive heater cores, covering 94 percent of all North American vehicle. They provide value in several ways, including increased thermal performance and resistance to corrosion. The HVAC cores use enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability. These certified heaters meet or exceed OE specifications—and are "drop in fitment" checked in the actual vehicles HVAC heater module, so they're ready to be installed right out of the box. Agility Auto Parts heaters are engineered and manufactured under ISO TS16949 quality systems and are 100 percent leak-tested.
( 20 )
$107.99
$53.50
Clearance
GSI Machine and Fabrication offers a variety of air spring suspension replacement parts, including these air bag cups for use in many 1960s, '70s, and '80s era Chevy trucks. The weld-in deep drop bag plates are made to OE specs to ensure proper fit and performance.
Not Yet Reviewed
$98.99
$56.50
Clearance
Yukon Gear & Axle minimum install kits are perfect when you just need the basics. They're a low-cost solution for gear changes in newer vehicles where the bearings can be reused. Available for a wide variety of applications, the kits come with high-quality components to ensure a smooth setup. Yukon minimum install kits include: * Pinion seal * Crush sleeve (where applicable) * Complete shim kit * Gear marking compound and brush * Pinion nut, O-ring, baffles, slinger (varies by application) * Extensive instruction manual
( 11 )
$119.99
$95.50
Clearance
Procar custom steel seat adapter brackets are available for hundreds of applications. They're designed for an easy installation and are vehicle-specific to avoid time-consuming modifications. They make it simple to be more comfortable, save money, and have the satisfaction of doing the job yourself. They are compatible with Procar brand seats only. Find the model designed for your car or truck.
( 518 )
$127.99
$88.50
Clearance
U.S. Wheel 70 Series white 8-spoke wheels are painted with blue and red pin stripes around the outer edge. They are available in many sizes and bolt patterns. Lug nuts and center caps are sold separately.
( 145 )
$124.99
$84.50
Clearance
Howe ball joints are the end result of a track-tested design. These ball joints are manufactured with superior internal components and come in an assortment of models to fit your vehicle perfectly. Upgrade your steering components with Howe components and drive with confidence.
( 12 )
$83.99
—
$117.99
$50.50
—
$75.50
Clearance
Tuff Stuff Performance Supercool water pumps create 30 percent more flow to help cool engines under abnormal conditions. Ideal for race applications, these pumps are made from high-quality materials, such as aluminum and iron, and are available in a variety of finishes. Options include short and long style; standard and high-volume flow; clockwise and counterclockwise rotation; and different pilot diameters. Whether you're replacing or upgrading, there's a Supercool water pump for your specific vehicle.
( 415 )
$138.99
—
$139.99
$66.50
—
$80.50
Clearance
Whether you're flying down the highway, cruising around town, or crawling down a mountain, life takes on a terrorizing side when you lose your brakes. Crown Automotive brake master cylinders are designed just like the originals for easy installation and brake line attachment. Master cylinders and brake lines should be periodically inspected and replaced for best overall safety. When you hit the brakes and the pedal goes to the floor the results can be catastrophic. Remember to be safe out there with Crown Automotive brake master cylinders.
( 10 )
$99.99
$72.50
Clearance
Lares takes care to clean their remanufactured power steering pumps thoroughly, and all exterior surfaces are reconditioned for a like-new appearance. Each component is inspected and replaced if it's not up to OE tolerances. All units receive new OE-equivalent seals and O-rings; and the pumps are then tested to ensure proper performance. Over a thousand models are available; order the power steering pump recommended for your vehicle.
( 18 )
$94.99
$66.50
Clearance
Forged in the fires of high performance engines, Fel-Pro Performance head gaskets are quite literally created to tame the fiery combustion chambers of up to 1,000 hp engines. Reinforced with KEVLAR® fiber and engineered to give you a perfect seal that can withstand combustion pressures of 1,500 to 3,000 psi, these gaskets are bred for high performance. They have a conformable anti-stick coating—and are constructed with pre-flattened copper or steel rings for easy installation, while also giving them the strength to tame your beastly powerplant. The anti-stick coating ensures easy removal and cleanup on frequent rebuilds, but also aids in micro-sealing minor surface irregularities. When rebuilding your engine, use the parts you wish were in it to begin with. Put a set of Fel-Pro Performance head gaskets in that engine—not only to help it perform better today, but to make your next engine project that much easier.
( 637 )
$89.99
$63.50
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
