Availability
Showing In Stock Items. Show All 31 Items.
Clearance
These Sealed Power MA Series main bearings can actually polish the journals on your crankshaft. That's because there's a small percentage of silicon mixed in with the aluminum and tin that make up the bearing-surface alloy. The silicon is there for wear resistance, but its toughness actually smoothes the journals of a crank whose surface hasn't been optimized! This special surface alloy is laid over a high-strength 1010 steel backing and delivers improved seizure and corrosion resistance, as well as better control of wall variance. It also helps to minimize debris embedding, which can score the crank's surface.
( 76 )
$82.99
—
$117.99
$53.50
—
$99.50
Clearance
Melling timing chain sets are designed for use with either performance or stock cams. They have a solid-bushing chain for a true bearing surface that rolls with the sprockets, eliminating chain stretch. The crank gears are machined from stress-proof steel. Most Melling timing chain sets have three keyways to ensure accurate timing for early or late model vehicles, and to allow you to set the cam timing at 4 degrees advanced, 4 degrees retarded, or stock. However, 50-state (stock replacement) sets have single keyways. The chains are available in several styles, such as single or double roller, single non-roller, and link belt. Melling timing chain sets are not for use above 6,500 rpm. Order the model designed for your vehicle application.
( 134 )
$123.99
$86.50
Clearance
Howards Cams race series vertical bar hydraulic roller lifters offer proprietary hydraulic valving specifically designed for continuous operation to 6,600 rpm with ideal seat pressures between 150-160 lbs. The lifter bodies are fully machined from alloy steel bar stock and are completely micro-polished. The nose wheels are machined from 8620 material and the cases are hardened for durability. Howards Cams race series vertical bar hydraulic roller lifters are fully rebuildable.
( 6 )
$149.99
$99.50
Clearance
Dove Manufacturing offers rocker arm stands for a variety of applications, including many Ford big block engines from the 1950s, '60s, and '70s. The shaft-mounting style center or end stands provide a base and pivot point for the rocker arms, keeping them aligned. Order the set recommended for your setup.
Not Yet Reviewed
$114.99
$79.50
Clearance
ACL Performance offers Race Series rod bearing sets for a wide range of vehicles. These high performance tri-metal engine bearings are designed to withstand higher RPM conditions. They feature a high-strength overlay plate with reduced thickness for improved fatigue properties. Select the crankshaft undersize and quantity recommended for your year/make and engine application. Additional details: * Hardened steel backs on all rod bearings to improve the support of the bearing lining and assist with bearing retention in the housing. * Increased crush for improved bearing retention * Elimination of flash plating on the back of the bearings to improve heat transfer through the bearings and to maximize the grip between the bearings and its housing * Increased eccentricity to compensate for bore distortion at high RPM and to assist in the formation of hydrodynamic oil films * 3/4 in. grooved main bearings to optimize bearing load carrying surface area and oil flow to the conrod bearings * Tight consistent wall tolerances to help you maintain consistent clearances * Enlarged ID chamfers on bearing edges (where required) to accommodate large fillet radius on performance crankshafts
( 8 )
$122.99
—
$145.99
$60.50
—
$72.50
Clearance
When you need quality crankshaft main bearings, Crown Automotive has direct replacement parts for a wide array of Jeep, Chrysler, Plymouth, and Dodge applications. Your engine bearings do many things—supporting moving parts from being damaged. Improper bearing selection can result in problems ranging from poor oil consumption to engine failure. Ensure that you're getting the proper bearings for your vehicle; choose Crown.
( 1 )
$77.99
$59.50
Clearance
Built with enhanced tri-metal, King XP-Series main bearings have a layered copper lead construction, with a nickel plate barrier and lead/tin/copper Babbitt overlay over a steel backing--in an adhesion process that provides superior stability and durability. King's advanced control measures hit a bull's-eye, maintaining wall thickness tolerances far tighter than their competitors: an amazing +/- .0001 in. The XP-Series main bearings are narrowed for large radii crankshafts and feature enlarged, chamfered oil holes with full, 3/4 in., or 1/2 in. grooving for improved oiling. They deliver consistent and reliable performance with a high-load capacity. These race-only Xtreme Performance (XP-Series) Tri-Lecular main bearings are proven track-tough to handle the ground-shaking power of your race engine. Hundreds of sets are available; order the bearings recommended for your vehicle.
( 43 )
$106.99
$51.50
Clearance
Gardner-Westcott engine dress-up bolt kits add a touch of class under your hood. The hardware is offered in a variety of materials, finishes, and head styles—with your choice of automotive logos or designs etched on the fasteners. Over a hundred different kits are available; order the model recommended for your vehicle and engine application.
( 109 )
$168.99
—
$239.99
$55.50
—
$67.50
Clearance
Protect your expensive engine and free up horsepower! D.S.S. Pro-Tray windage trays are direct bolt-on accessories to the D.S.S. Main Support Systems. They provide a combination of added strength, longevity, and horsepower to a stock block and are a must for today's high-tech, high-horsepower combinations. Constructed from durable billet aluminum, these full-length, multi-level Pro-Trays offer the ultimate in windage control and are designed to fit most aftermarket and stock oil pans.
( 2 )
$119.99
$79.50
Clearance
Don't trust your engine investment to just any no-name rocker manufacturer. Harland Sharp heavy-duty roller rockers are specifically designed for the heavy spring pressure and high-lift geometry of highly modified engines. They're also engineered with wider bodies, resulting in increased rocker strength and longevity. So, when your engine requires extra durability, use Harland Sharp heavy-duty roller rockers.
( 58 )
$95.99
—
$100.99
$66.50
—
$69.50
Clearance
Whether it's a car, truck, motorcycle, marine, or performance racing application—properly sealing the piston to the engine block is a requirement. Hastings premium ductile ring sets do just that, and they're offered in many different options to fit virtually any piston. If the engine you're working on is blowing smoke, using excessive oil, or at a loss for power, it may be time for new rings. These premium ductile piston ring sets are great for rebuilds or new builds, daily drivers or performance vehicles. Order the sizes needed for your project.
( 135 )
$68.99
—
$163.99
$53.50
—
$94.50
Clearance
King AM-Series main bearings are recommended for street or marine applications. These crankshaft bearings have superior embeddability, which provides greater macro-particle to reduce scratching of the crank journals and tearing or weakening of the Babbitt overlays. King AM-Series main bearings feature tolerance control to within plus or minus .0001—and they're lead-free, making them environmentally-friendly and user-safe. Hundreds of performance sets are available; order the replacement bearings designed to fit your vehicle.
( 32 )
$102.99
$65.50
Clearance
King HP-Series rod bearings were developed mainly for drag race applications needing a material harder than the Babbitt top layer. These applications demanded a structure that could withstand high loads for short durations and still offer higher embeddability and compatibility. In response, King developed the HP-Series, featuring the Alecular metal structure. The HP-Series is also suited for many performance applications with nodular cast iron crankshafts, such as street, strip, and some levels of Circle Track racing. Order the set recommended for your vehicle. HP-Series bearings are particularly suitable for the following cases: * When a tri-metal bearing's Babbitt overlay extrudes over the sides, migrates to one end, or is physically removed by the crankshaft * When the intermediate layer of a tri-metal bearing is exposed, damaging the crank journal and requiring expensive grinding or replacement * When contaminants enter the oil stream, scratching and damaging the crankshaft journals
( 36 )
$127.99
$63.50
Clearance
These Proform pushrods can give you the foundation you need for a reliable valvetrain. They are manufactured from 4130 chromoly heat-treated tubing with .065 in. wall thickness. Proform pushrods can be used with guideplates; they feature a heat-treated insert on one end and a precision-formed tip to meet the friction-reducing specified radius on the other. Create a stable and durable valvetrain with these Proform pushrods.
( 7 )
$94.99
$60.50
Clearance
Give your engine the winning edge with King XP-Series coated main bearings. Built off the revolutionary XP-Series tri-metal construction, King's factory-applied pMaxKote™ nano-composite coating takes protection to the next level without adding any additional thickness! Order the replacement main bearings designed for fitment with your engine. pMaxKote™ provides: * Superior seizure resistance * Superior cavitation resistance * Superior wear resistance * Superior protection against oil starvation
( 7 )
$126.99
$80.50
Clearance
Mahle Original replacement pistons have the same great OE features to provide the perfect fit and function in your vehicle. They offer things like compensated ring grooves to ensure proper ring loading and oil control; as well as expansion-controlled designs for small fitting clearances—to reduce engine noise, wear, emissions, and improved oil control. Choose the model designed for your vehicle and engine application.
( 7 )
$153.99
$80.50
Clearance
Free your engine's horsepower on the wings of Eagle H-beam connecting rods. Their 2-piece, forged, vacuum-degassed, 4340-certified steel construction provides outstanding strength, while still weighing much less than stock rods. Each rod is multi-stage heat-treated, X-rayed, sonic-tested, magnafluxed, 100 percent machined, and then shot-peened to stress-relieve the metal. The rods have precision cap alignment sleeves to positively locate each rod cap, silicon bronze bushings for floating pin models—and are available in stroker models that allow additional cam-to-rod clearance for large stroke combinations. They come standard with 190,000 psi rated ARP 8740 and 230,000 psi rated ARP 2000 rod bolts, or 265,000 psi rated ARP L-19 bolts as upgrades. Instructions and rod bolt lubrication are included. Order the model designed for your vehicle year/make and engine application.
( 82 )
$134.99
$91.50
Clearance
New valve springs with larger diameters require new retainers to handle the higher pressures developed by the springs. Pioneer valve spring retainers are the solution. Precision-machined from high-quality steel and finished in black oxide, Pioneer valve spring retainers are specifically designed for positive location.
Not Yet Reviewed
$127.99
$52.50
Clearance
Tuff Stuff Performance Type II power steering brackets are the perfect complement to secure your Type II pumps. These hefty power steering brackets are laser-cut from 1/4 in. plate steel and then triple chrome plated or powdercoated for a great looking finish. They work with both serpentine and V-belt pulley applications. Order the bracket kit that's best suited for your vehicle/engine and pump model.
( 5 )
$175.99
$92.50
Clearance
Crown Automotive pistons offer value-packed performance you can count on. No matter how many miles you have on your engine, at some point the time will come for a ring job or a rebuild. Crown pistons are available in a variety of styles in durable cast aluminum—or you can choose from their stronger hypereutectic piston options to meet the needs of your application. Select the correct replacement size and let Crown Automotive pistons help make your maintenance project a success.
( 2 )
$90.99
$61.50
Clearance
Whether it's a car, truck, motorcycle, marine, or performance racing—properly sealing the piston to the engine block is a requirement. Hastings Piston ring sets do just that, while being offered in many different options to fit virtually any piston out there. If the engine your working on is blowing smoke, using excessive oil, or at a loss for power, it may be time for new rings. Hasting piston ring sets are great for rebuilds or new builds. Hastings has been manufacturing piston rings since 1915 and they have not spent a second developing anything but piston rings. Trust the professionals at Hastings and use them on your next job.
( 118 )
$79.99
$63.50
Clearance
Hastings Claimer Series Performance piston ring sets are for builders wanting value without sacrificing precision and performance. They start with top rings made from proprietary shell-mold cast iron with plasma moly impact-resistant alloy, providing a hard, yet lubricating, low-friction structure. The plasma moly coating improves wear resistance, reduces scuffing, traps lubricating oil, and is compatible with a wide range of cylinder bore materials. The 2nd rings are manganese phosphate coated. Claimer moly top rings are torsional positive twist and the 2nd rings are torsional reverse-twist taper face. Completing the set of Moly Claimer Performance rings are Hastings Flex-Vent oil rings that minimize friction, improve flexibility, and provide high-rpm oil control.
( 13 )
$107.99
$87.50
Clearance
Silv-O-Lite quality cast pistons are manufactured from cast aluminum and then machined to produce a unique diamond finish, all to exacting skirt tolerances. These OE-type pistons are heat-treated and machined for strength and durability, tighter piston-to-cylinder wall clearances, and longer piston life.
( 50 )
$149.99
$97.50
Clearance
Sierra Marine offers various sizes of their main bearings to meet your marine engine needs. These components have one of the toughest, dirtiest jobs in your engine. A quality main bearing must withstand heat, friction, and high-rpm stress to help your engine operate at its best. So keep the good times cruising and order the Sierra Marine main bearings designed to fit your application.
Not Yet Reviewed
$239.99
$95.50
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
