Availability
Showing In Stock Items. Show All 31 Items.
COMP Cams shaft mount aluminum rocker arms are one of the most cost-effective ways to increase horsepower. These shaft rockers were designed using the latest in computer software and engineering. They center the roller tip over the valve tip at the correct time so that the roller tip is never more than 0.020 in. off-center of the valve tip. At the greatest load point, the roller tip contact is on the center of the valve. At valve closing, the roller tip contact is slightly behind the valve centerline. When the valve is at full open, the tip contact is slightly behind the centerline of the valve. The results are more horsepower and better performance.
( 1 )
$1,788.95
—
$2,171.95
Twisted Wedge® 11R 227 cylinder heads represent Trick Flow's ultimate development of the Twisted Wedge® innovation, featuring Trick Flow's most efficient combustion chamber design. The combustion chamber and valve layout move the intake valves away from the cylinder walls to reduce valve shrouding, significantly improving flow at higher lift. Shallow 11° intake/13° exhaust valve angles improve piston-to-valve clearance for high lift cams and reduce chamber volume for improved compression and efficiency. High velocity runners are optimized on the flow bench and dyno proven to outperform the competition on hydraulic roller camshaft engines. Premium materials and components, along with world-class CNC processes, guarantee uncompromising quality and durability, dimensional accuracy, and balanced flow from port-to-port. Machined castings increase strength and have a billet-like appearance. Additional features include CNC-profiled combustion chambers, 2.080"/1.600" stainless steel intake/exhaust valves, Trick Flow® by PAC Racing valve springs, and titanium retainers. Twisted Wedge® 11R 227 heads have CNC Competition Ported runners with a premium high- resolution finish for ultimate performance. Cylinder heads are available fully assembled or as bare castings. Sold individually. Key Features: • 227cc intake ports and 56cc or 66cc combustion chambers • 2.080 in. stainless steel intake valves • 1.600 in. stainless steel exhaust valves • .625" thick deck • Titanium retainers • 11 degree intake valve angle • 13 degree exhaust valve angle
Not Yet Reviewed
$1,524.99
Take the 18 degree power leap! Ideal for drag and high-rpm circle track racing, Trick Flow® Ultra 18® 250 cylinder heads make serious horsepower right out of the box. In fact, the heads deliver higher airflow numbers than fully prepped 23 degree small block Chevy heads. These heads feature Trick Flow CNC-profiled combustion chambers and CNC Competition Ported runners with a premium high resolution surface finish for maximum flow and performance. The heads accept most current 18 degree intake manifolds, headers, and other components. They require the use of offset shaft-mounted rocker arms and a mechanical roller camshaft with offset intake lifters. Trick Flow® Ultra 18® cylinder heads are available fully assembled or as bare castings and sold individually.
Not Yet Reviewed
$1,549.99
You're taking a step up in performance with Edelbrock E-205 small block Ford cylinder heads. Featuring larger runners for increased airflow, revised exhaust ports, and larger diameter springs for higher lift camshafts, Edelbrock E-205 cylinder heads are ideal for spec series racers and larger displacement engines. They are able to support the power that you need to compete--more than 500 naturally aspirated horsepower and even more in forced induction applications! Get race-level performance with OEM compatibility when you bolt on a pair of Edelbrock E-205 cylinder heads.
( 2 )
$1,687.95
—
$1,838.95
Ford Performance Parts teamed up with Jon Kaase to redesign their 429 Cobra Jet cylinder heads, and the results are these Super Cobra Jet heads. They feature revised valve angles and locations to reduce cylinder wall shrouding and improve flow, along with redesigned combustion chambers to accommodate the more centrally located valves. These heads use the same valves, valve springs, retainers, and 7/16 in. stud-mounted roller rockers as the current Ford Performance Parts 429 Cobra Jet heads, and the standard Cobra Jet intake and exhaust manifolds bolt right on. This new design offers a 25-50 HP increase over current Cobra Jet heads, depending upon displacement and camshaft.
( 13 )
$1,772.99
—
$1,821.99
Developed and designed in conjunction with 8-time Pro Street World Champion Pat Musi, these Edelbrock Musi/Victor 24 degree CNC-machined cylinder heads are sure to perform at the highest level. They are manufactured from high-quality aluminum and feature CNC-machined combustion chambers, intake runners, and exhaust port runners. They are available in a bare casting or an assembled version. The assembled version includes stainless steel 2.30 in. intake and 1.90 in. exhaust valves, Manley valve springs for a solid roller camshaft, 10 degree titanium retainers and locks, guideplates for 3/8 in. diameter pushrods, and 7/16 in. rocker arm studs. Get maximum horsepower right out of the box with these Edelbrock cylinder heads.
Not Yet Reviewed
$2,122.50
AFR 180cc SBC Eliminator street heads are available in your choice of straight or L98 angle plug versions. These cylinder heads feature a 75cc or 65cc combustion chamber with a 64cc exhaust port and a 3/4 in. thick head deck (ideal for nitrous or blower applications). Standard valves are lightweight, 8mm, and have a 2.020 in. intake and 1.600 in. exhaust with AFR's hardened ductile iron interlocking valve seats. The valve springs included are intended for use on roller camshafts. These heads' exceptional flow characteristics, 23 degree valve angle, and standard valve spacing make them the perfect street heads for 327 to 350 c.i.d. engines in the idle to 5,500 rpm operating range (higher rpm ranges are possible, depending on the combination of parts). Eliminator cylinder heads carry CARB E.O. #D-250-2 when used on 1969-94 applications with the heat riser. They're also available for your 1987 and later engines with centerbolt valve covers and two center intake bolts at 72 degree angles; Vortec-style cylinder heads are available, too. Their dual valve cover bolt pattern is standard and their exhaust port is raised .100 over GM L98 cylinder heads.
( 9 )
$2,106.30
Step up to race-level performance with OEM compatibility using these Edelbrock E-Series E-210 aluminum cylinder heads. They feature larger runners for increased airflow, revised exhaust ports, and larger diameter springs for higher lift camshafts--perfect for spec series racers and large-displacement engines. Available bare or assembled, E-210 cylinder heads allow you to use off-the-shelf headers and hardware. Forget those overseas castings; go with quality, economy, and performance. Go with Edelbrock E-Series E-210 cylinder heads.
( 13 )
$1,654.95
Edelbrock Performer RPM aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. These heads offer improved power throughout the RPM range for greater throttle response and top-end horsepower. Countless options are available; order the model recommended for your vehicle and engine application.
( 162 )
$1,578.50
All Edelbrock aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. They offer improved power throughout the rpm range for greater throttle response and top-end horsepower. The intake and exhaust runners are CNC-machine profiled for superior flow and performance.
( 41 )
$1,587.50
—
$1,625.50
Edelbrock Performer RPM Pontiac CNC cylinder heads have the same specifications as our popular Performer RPM cylinder heads for 1962-79 455 c.i.d. Pontiac engines, but feature a CNC-machined combustion chamber. The CNC-machined chambers result in a consistent and precise chamber for improved flow performance. Performer RPM CNC cylinder heads are available in two chamber sizes. The 87cc chamber version is ideal for 9.5:1 engines and will deliver excellent street performance on low-octane fuel. Performer RPM CNC cylinder heads with 72cc chambers are best for higher compression engines. Both are patterned after the same port flange configuration as the 1969-70 Ram-Air IV Pontiac cylinder heads.
( 2 )
$1,521.50
—
$1,560.50
Designed for high performance street/strip engines! Trick Flow® PowerPort® Cleveland 225 cylinder heads feature runners based on the OE Ford 2V design. The heads feature fully CNC competition ported runners with a premium high resolution surface finish for maximum, all-out performance The exhaust runners are raised .100" from the stock location to improve the short turn radius and dramatically improve exhaust flow, and a revised oil return system improves oil drain back and includes provisions for mating with Ford 351W blocks. PowerPort Cleveland 225 cylinder heads fit Ford 351C, 351M, and 400M engines out of the box. With minor machining, the heads also fit Ford 302/351W blocks to create a "replica" Boss 302 or a 351 "Clevor" engine. The heads are available fully assembled or as bare castings. Sold individually.
( 6 )
$1,599.99
Trick Flow® High Port® 225 cylinder heads are specifically designed for large cubic inch small block Ford engines as well as engines with high-boost superchargers or turbos, big shot nitrous oxide systems, and other mega-power combinations. They feature unique valve spacing, .750" raised exhaust runners, extra strong castings and thick decks for additional rigidity and gasket integrity, superior cooling characteristics, and most importantly, excellent airflow. Top-of-the-line CNC Competition Ported runners with a high resolution surface finish provide maximum airflow and power over the entire rpm range. The entry into the intake runner has been reshaped to help seal the area along the port roof and thicker port walls increase strength and provide additional material for porting. Plus, interlocking ductile iron seats are used to handle the stresses of high heat, high horsepower applications. Other features include fully CNC-profiled combustion chambers with port-to-valve seat blending (bowl blending) and raised valve cover rails. Trick Flow® High Port® 225 cylinder heads are available fully assembled or as bare castings and sold individually.
( 3 )
$1,524.99
Something great just got better! Trick Flow® used advanced 3D solid modeling and CAD tools (plus a couple decade's worth of racing experience) to turn its track-proven Twisted Wedge® design into the potent Twisted Wedge® 11R 205 head for serious performance enthusiasts and racers. Trick Flow® Twisted Wedge® 11R 205 heads are a direct replacement for previous Twisted Wedge® heads and work with all Twisted Wedge-specific pistons. New high velocity, race-inspired CNC Competition Ported runners have been optimized for today's popular bore and stroke combinations, and have a premium high resolution finish for ultimate performance. Modified 11 degree intake and 13 degree exhaust valve angles and a restructured, CNC-profiled combustion chamber arrangement provides more airflow and performance potential. Premium certified materials and components, along with the finest CNC tooling, are used to ensure uncompromising quality and durability, dimensional accuracy, and balanced flow from port-to-port. The fully machined castings are very strong and have a great-looking, billet-like appearance. Trick Flow® Twisted Wedge® 11R 205 cylinder heads are available fully assembled or as bare castings and sold individually.
( 7 )
$1,524.99
Perfect for high performance street/strip, racing, and marine big block Chevy engines, Trick Flow® PowerPort® 320 cylinder heads deliver exceptional mid- to high-rpm performance. The Fast As Cast® rectangular runners flow almost as much air as fully CNC-ported heads right out of the box. That means you'll get CNC-ported performance for about the same price as regular cast heads. The fully CNC-profiled, heart-shaped combustion chambers have CNC bowl blended valve seat transitions to promote high velocity and huge airflow volume, plus 24 degree valve angles with 4 degree side cants to further increase airflow. Other features include premium, high-strength aluminum castings, extra-thick decks and walls for porting, and adjustable guideplates. Trick Flow® PowerPort® 320 cylinder heads are available fully assembled or as bare castings. Sold individually.
( 1 )
$1,599.99
Trick Flow High Port® 240 cylinder heads are specifically designed for large cubic inch small block Ford engines as well as engines with high-boost super- and turbocharges, big shot nitrous oxide systems, and other mega-power combinations. They feature unique valve spacing, .750" raised exhaust runners, extra strong castings and thick decks for additional rigidity and gasket integrity, superior cooling characteristics, and most importantly, excellent airflow. Top-of-the-line CNC Competition Ported runners with a high resolution surface finish provide maximum airflow and power over the entire rpm range. The entry into the intake runner has been reshaped to help seal the area along the port roof and thicker port walls increase strength and provide more material for porting. Plus, interlocking ductile iron seats are used to handle the stresses of high heat, high horsepower applications. Other features include fully CNC-profiled combustion chambers with port-to-valve seat blending (bowl blending) and raised valve cover rails.
( 4 )
$1,649.99
PROMAXX Performance Project X small block Ford cylinder heads are one word—awesome! They feature ultra-smooth 356-T6 aluminum casting, 5-angle valve jobs, precision CNC machining, and diamond-honed bronze guides and can make big power in your small block Ford application. The new swirl designed chamber is the difference. Couple that with a state-of-the-art new casting and you have a home run! Fit your budget build with abundant power with PROMAXX Project X small block Ford cylinder heads.
( 3 )
$1,833.00
World Products Merlin cylinder heads for big Chevys combine large intake runners with open combustion chambers to produce good torque and low-end power. The heads are available assembled or bare; rectangular or oval; with or without intake/exhaust valves; and other options. Order the model that best suits your application.
( 7 )
$1,840.28
Whether you are into drag racing, circle track, road racing, marine, or just running a serious piece on the street, Jesel Pro tie-bar roller lifters are built to go the distance! Manufactured to the highest standards using the strongest materials available, lifter components are machined in-house, allowing Jesel the ability to control the finish and hold critical tolerances which far exceed current industry standards. Choose the proper fit for your application. Features and benefits: * Heat-treated 8620 bodies are DLC coated to reduce friction and body wear * .842 in. up to .937 in. diameters are available covering all popular OE and aftermarket blocks * Heat-treated stainless steel tie-bars keep lifter precisely aligned through the lift cycle * Tie-bars are retained to the bodies using Jesel designed tool steel nuts * Cam rollers with precision sorted needle bearings (standard) * Pressurized oiling to the axle assembly * Heat-treated and polished tool steel roller * Offset or on-center pushrod seats available * Optional bronze bushed cam rollers available
Not Yet Reviewed
$2,125.00
Jesel Sportsman tie-bar roller lifters offer Jesel quality and durability at a lower cost. From mild drag engines, street/strip builds, pleasure boats to circle track, these lifters will give you the bulletproof performance you are looking for. Sportsman lifters have polished 8620 heat-treated bodies and are assembled with bronze bushing cam rollers. They also share the same roller, axle, tie-bar, and hardware found in Jesel's Pro Series line. The bronze bushings used have been tested for durability through hundreds of torturous dyno pulls and over a million cycles on Jesel's in-house Spintron. Lifters are available for select OE and aftermarket applications with a range of lifter body diameters from .842 in. to .905 in. with either offset or on-center pushrod seats. Choose the proper fit for your application. Features: * Heat-treated polished 8620 bodies * .842 in., .875 in., and .905 in. diameter bodies * Heat-treated stainless steel tie-bars * Pressurized oiling to the axle assembly ensures adequate oil supply * Heat-treated and polished tool steel roller
Not Yet Reviewed
$1,775.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
