1974 CHEVROLET NOVA Parts & Accessories

Holley Sniper 2 EFI 650 HP Base Fuel Injection Systems

Holley Sniper 2 EFI Base Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * For applications using a vehicle specific EFI conversion tank and fuel pump, or already having a fuel system capable of the required 55-65 psi, these systems are offered without a pump and fuel lines * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

4.13 out of 5 stars ( 32 )

$1,299.95

—

$1,399.95

Holley Sniper 2 EFI 650 HP Base Fuel Injection Systems with Power Distribution Module

Holley Sniper 2 EFI Base Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * For applications using a vehicle specific EFI conversion tank and fuel pump, or already having a fuel system capable of the required 55-65 psi, these systems are offered without a pump and fuel lines * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

4.36 out of 5 stars ( 11 )

$1,399.95

—

$1,499.95

Wilwood Forged DynaPro 6 Big Brake Front Brake Kits

Wilwood Forged DynaPro 6 Big Brake front brake kits offer enhanced street performance and stopping power for your American muscle and vintage hot rods. Traditional non-ABS spindle vehicles benefit from the combination of Wilwood forged billet 6-piston DynaPro calipers and your choice of high performance rotors (including their SRP drilled and slotted with E-coat) and Smart Pad brake pads. Wilwood Forged DynaPro 6 Big Brake front brake kits will complement your street/strip ride with improved braking capacity, performance, and looks.

4.67 out of 5 stars ( 89 )

$1,279.30

—

$1,415.11

Wilwood Forged Dynalite Pro Series Front Disc Brake Kits

Wilwood's Forged Dynalite Pro series front disc brake kits are designed to provide unmatched performance with classic, high-tech styling for a wide variety of street rods, musclecars, hot rods, and heavy drag cars. The kits combine the powerful clamping force of Dynalite calipers with the added performance and cooling capacity of competition-style vented rotors. Other features include hubs, brake pads, caliper brackets, mounting hardware, and detailed instructions for an easy bolt-on installation. In addition to everything else, these kits can also cut as much as 35 lbs. off of your front-end.

4.58 out of 5 stars ( 201 )

$1,057.29

—

$1,194.79

Holley Sniper 2 EFI Fuel Injection Upgrade Kits

Want to make the switch from the original Sniper EFI to Sniper 2 and don't want to rewire your system? The new Holley Sniper 2 fuel injection upgrade kits are designed to do exactly that! Included with each Sniper 2 plug-and-play upgrade system is an adapter solution that connects your existing Sniper EFI wiring harness to a Sniper 2 throttle body in minutes. Simply remove your Sniper EFI throttle body from the intake manifold, unplug all connectors, reinstall the Sniper 2 throttle body, and plug the Sniper EFI 2 adapter harness into your existing main harness. Cycle your ignition key, run a fresh wizard on the display of your choice, and enjoy the benefits of Sniper 2 EFI. The #1 EFI conversion system just got better! Introducing Sniper 2 EFI—a self-tuning, easy-to-install, EFI conversion for common 4-barrel (4150 flange) style carburetors. Holley took everything that they learned from the original Sniper EFI system and added 14 new features that will make your EFI conversion simpler, more reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. Make your classic drive like a modern fuel injected vehicle, including easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine and the system will self-tune with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Four total upgrade kits are available: polished and black, with or without external fuel pressure regulator (required for Sniper 2). Upgrade kit features: * Update your Sniper EFI to the new, improved Sniper 2 in less than one hour! * Eliminates the need to rewire your existing installation; one step, plug-and-play upgrade to a Sniper 2 * Improve your ride with the Sniper 2, including wireless connectivity, smooth throttle feel, improved RF resistance, and a hidden wiring harness. * Reuses existing coolant temperature and oxygen sensors * Female -6 AN O-ring fittings for a tight seal * Overall height is only 3.280 in. to fit under most hoods * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI of regulated fuel supply * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Sniper 2 is part of the Sniper EFI complete ecosystem * Available with fuel system kits: that include an adjustable external regulator, fittings, and a 3 ft. section of fuel hose, allowing you to easily mount your regulator in the engine bay Additional NEW features: * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

3.82 out of 5 stars ( 22 )

$1,024.95

—

$1,449.95

Wilwood Forged Dynalite Big Brake Front Brake Kits

With Wilwood Forged Dynalite Big Brake front brake kits, you'll be ready for show, street, or strip! Track-ready performance and high-tech style come with oversized rotors, forged billet Dynalite calipers, and high performance Wilwood SmartPads. These front brake kits are fully compatible with OE master cylinder output. Options for the caliper finish and rotor design make it simple to match the brake response and style preferences on all types of daily drivers, race vehicles, and ultra-styled show machines! The choice is yours for big stopping power--choose Wilwood Forged Dynalite Big Brake front brake kits.

4.62 out of 5 stars ( 135 )

$1,100.60

—

$1,238.10

Doug's Headers Stainless Steel Headers

Experience is in Doug's Headers DNA. They have been a respected name since the 1960s and remain one of today's most popular brands among muscle car enthusiasts who don't sacrifice quality and fit when it comes to their vehicle. Doug's stainless steel headers will give the greatest increases in horsepower and torque across the entire rpm spectrum, and they are meticulously designed to provide maximum power and the highest quality available. Available in many fitments, choose a set designed for your vehicle. Key features: * 304 stainless steel construction to prevent rust and corrosion * 3/8 in. thick machined flanges to prevent warping * Mandrel-bent tubes for an accurate fit and improved flow * Precision formed long transition collectors reduce backpressure * Header tubes have a natural stainless finish * Necessary mounting hardware, collector reducers or connector pipes, premium gaskets, and detailed installation instruction sheets are included

4.25 out of 5 stars ( 36 )

$1,007.52

—

$1,434.67

Holley Sniper EFI Stealth 4150 Fuel Injection Systems

Holley Sniper EFI Stealth 4150 fuel injection systems feature four 100 lb.-hr. fuel injectors capable of supporting up to 650 hp naturally aspirated. The Sniper Stealth 4150 ECU is capable of fuel map self-learning and ignition timing control--improving idle stability, drivability, and wide-open throttle horsepower! These systems also include transmission kickdown provisions for GM TH350/400, 200R4/700R4 and Ford C4/C6 applications. The 4150 is available individually or in a complete Master Kit (see contents listed below). ALL Sniper EFI Stealth 4150 systems feature: * Bolt-on 4150 flange carburetor replacement * Throttle body mounted ECU; no extra boxes to mount * Supports up to 650 hp with four 100 lb.-hr. injectors * All of the wiring exits below the rear fuel injector cover—for a completely stealth installation * Timed spark part for vacuum advanced distributors located under the front fuel bowl—for easy access to the distributor * Air entry is machined to fit most stock-style air cleaners with air cleaner locator provisions * Only four wiring connections required (battery +, battery -, switched ignition, and RPM) * External fuel pressure regulator required, set to a base pressure of 58.5 psi, such as 12-886 * Integrated ignition timing control * High-resolution full-color touch screen for initial setup, tuning, and gauge displays * Simple calibration wizard (answer a few questions about your engine and it creates the base map, then starts tuning on its own); NO laptop required * Self-tuning ECU means you don't have to be a computer/tuning wiz to have EFI * The included genuine Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learn * OEM-style TPS/IAC and fuel pressure regulator, for years of dependable service * Included clamp-on oxygen sensor kit for 2.25 in. exhaust ensures a leak-free oxygen sensor installation, with stainless steel T-bolt clamps and a stainless steel (weldable) oxygen sensor flange * Available in three finishes: shiny, ceramic black, and classic gold MASTER KITS also include complete fuel system with an external fuel pressure regulator preset to 58.5 psi, 20 ft. of 3/8 in. Vapor Guard fuel hose, fuel pump, filters, necessary hardware, and bulkhead fitting to return fuel into the tank.

4.27 out of 5 stars ( 41 )

$1,499.95

UniSteer 1967-69 Camaro/1968-74 Nova Rack and Pinion Kits

UniSteer Camaro/Nova rack and pinion kits are superior steering components designed with racers in mind. They're engineered to match the factory geometry for specific Chevy model years—resulting in no-bump steering. These racks come mounted on a custom bracket that makes installation a breeze. The unit mounts to the rear of the crossmember, bolting to the lower stock control arm bolts. The outer tie rod ends are bolted to the stock steering arms; no fabrication is required. Compact and lightweight, the parts offer maximum ground clearance and can drop up to 65 lbs. off the stock front end. UniSteer rack and pinion kits also include outer tie rods, mounting bracket, hardware, and instruction sheet for installation. Order the conversion kit tailored for fitment on your vehicle. UniSteer stands behind their products with a 2-year, Unlimited Mile Warranty.

3.67 out of 5 stars ( 18 )

$1,009.99

McLeod RXT Street Twin Clutch Kits

McLeod RXT Street Twin clutch kits are ideal for the extreme horsepower enthusiast who wants performance and economy. Capable of handling up to 1,000 hp, the RXT Street Twin clutches are for those who've kicked it up another notch—but still require streetability. The ceramic facing on the clutch discs provides slightly aggressive engagement with a soft pedal effort, making these clutches suitable for most street performance enthusiasts. Match your vehicle specs to the correct model from McLeod. Additional features include: * Alignment tool * Lighter-than-stock pedal feel * Available with dedicated flywheel or adapter ring for factory flywheel * CNC-machined and anodized flywheel adapter ring * Smooth engagement with excellent release qualities * Ceramic facings on disc increase holding power over similar organic linings * Low rotating mass for quick revs * Blanchard ground floater with multiple straps to reduce noise for streetability

4.69 out of 5 stars ( 48 )

$1,050.00

Quick Fuel Q-Series 4-Barrel Carburetors

Get big-time performance with Quick Fuel Q-Series 4-barrel carburetors with high-flow main bodies, which include either down-leg or annular boosters, screw-in idle and high-speed air bleeds, accelerator pump discharge nozzles, and a blended venturi area. These carburetors have CNC-machined billet metering blocks with 4-stage emulsion to provide more precise fuel metering, improve throttle response, and give a more uniform fuel performance curve. With so many great benefits and their blend of performance and drivability, it's no wonder that these Quick Fuel Q-Series carburetors are the popular choice. So, go ahead--throttle it up with Quick Fuel!

4.73 out of 5 stars ( 49 )

$1,126.95

—

$1,499.95

Holley Sniper EFI 2300 Two-Barrel Fuel Injection Systems

Introducing Holley Sniper EFI 2300 two-barrel fuel injection systems! They're perfect for any vehicle that came standard with a 2300 Holley flange, like some Fairlanes, F100s, Javelins, Mustangs, Thunderbirds, Cougars, and more. These systems are economically priced so you can have all the benefits of EFI and still have money to finish or upgrade your ride! Put an end to cold start issues, hesitations, vapor lock, and flooding. Upgrade to Sniper EFI and get the tactical accuracy of EFI today! Features/Benefits: * Bolt-on 2300 flange carburetor replacement * Throttle body mounted ECU (kits only); no extra boxes to mount * Supports up to 350 hp with two 100 lb./hr. injectors * Only 4 wiring connections required! (Battery +, Battery -, Switched Ignition, and RPM) * Internal fuel pressure regulator eliminates the hassle of plumbing an external fuel pressure regulator (preset to 58.5 psi) * Integrated ignition timing control * High-resolution full color touch screen for initial setup, tuning, and gauge displays * Simple Calibration Wizard (answer a few questions about your engine and it creates the base map, then starts tuning on its own); NO laptop required! * Self-tuning ECU means you don't have to be a computer/tuning wiz to have EFI * The included Genuine Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learn * OEM-style TPS/IAC and fuel pressure regulator for years of dependable service * Included clamp-on oxygen sensor kit for 2.25 in. exhaust ensures a leak-free oxygen sensor installation, with stainless steel T-bolt clamps and a stainless steel (weldable) oxygen sensor flange * Equipped with C4 / C6 Ford transmission kick down lever, as well as TH350, 400, and 700R4 provisions * Accepts many common 5 1/8 in. OEM or aftermarket air cleaner assemblies * Master Kit includes complete fuel system consisting of: 20 ft. of 3/8 in. vapor guard fuel hose, 12-920 fuel pump, filters, necessary hardware and bulkhead fitting to return fuel into the tank * Sniper EFI software free to download which allows for real time tuning

4.09 out of 5 stars ( 56 )

$1,229.95

Flaming River Tilt Column Shift Steering Columns

Flaming River tilt column shift steering columns feature large tube diameters and compact shrouds to create a unique custom look. Available in a variety of styles, lengths, and shaft sizes, they come complete with a gearshift knob, billet dress up kit (tilt, turn signal lever, and hazard knob), GM wiring (4 1/4 in. connector), and removable 12-position linkage arm. The columns are manufactured from high-quality 304 grade stainless steel, will never rust, and are available in a variety of finishes—including a paintable mill finish, black powdercoated, spray chromed, or polished to a high luster. Mill finish columns are shipped chemically clean and can be painted to match or highlight an interior with only minor preparation. A combination neutral safety switch/back-up light (sold separately) must be ordered with the column, except for select models that include a switch. Select units include an integrated ignition key located at the 3 o'clock position, with no welded-on attachments or extra relays required. These columns are complete with a key assembly, wiring, and ignition switch. Columns are offered with or without illuminated gearshift indicators. Have an overdrive automatic transmission? No problem; order the optional gearshift indicator overdrive lens (sold separately). Flaming River tilt column shift steering columns are available in universal and vehicle-specific models.

4.02 out of 5 stars ( 48 )

$1,182.99

—

$1,204.99

McLeod Street Twin Clutch Kits

McLeod Street Twin clutch kits are designed to be high performance replacements for your OEM clutch. They include everything you need--a new disc, pressure plate, and your choice of a billet steel or billet aluminum flywheel. McLeod Street Twin clutch kits are pre-balanced to fit specific applications and include the correct alignment tool for installation.

4.25 out of 5 stars ( 4 )

$1,295.00

—

$1,395.00

Doug's Headers

Doug's Headers has long been recognized of as one of the premiere exhaust header manufacturers in the performance industry. Since1958, they have been producing high-quality, hand-built, mandrel-bent exhaust headers. Each and every header is tuned with the proper tube size and length to efficiently remove all of the exhaust from each cylinder, reducing pumping losses, and resulting in dramatic increases in horsepower and torque. Doug's headers are carefully developed on the vehicles that they are intended to fit and are re-checked numerous times during the design and manufacturing process. Their designs include mid-length headers, Tri-Y headers, and long tube headers, plus manifold replacement headers. Their headers come with all the necessary mounting hardware, collector reducers or connector pipes, premium extra-thick gaskets, and detailed installation instruction sheets. The gaskets are rated up to 1100 degrees F, pressures to 3700 psig (255 bar), and are designed for an exact port match with their headers. Doug's Headers offer a choice of finishes: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier that significantly lowers under hood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw steel is available for individual customizing Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.

4.24 out of 5 stars ( 726 )

$1,008.61

—

$1,236.46

Quick Fuel SS-Series Carburetors

These Quick Fuel SS-Series carburetors are designed to offer the power of a race carburetor in a streetable package that weighs 5 lbs. less than other carburetors. Manufactured completely from aluminum, they allow you to change the idle feed and offer power valve channel restrictions and idle and high-speed air bleeds for the ultimate in tunability. The solid-state, electric-choke Quick Fuel SS-Series carburetors have billet throttle bodies, billet metering blocks, 4-corner idle systems, secondary jet extensions, and notched secondary floats. The vacuum secondary carburetors feature fuel bowls with a single-sight glass window, while the mechanical secondary carburetors have dual-inlet, dual-sight glass 4500-style fuel bowls and include additional links to tune the secondary opening rate. Quick Fuel has done it--they've created all-aluminum Super Street carburetors that are perfect for your high performance street machine.

4.35 out of 5 stars ( 48 )

$1,024.95

Wilwood DynaPro Dust-Boot Pro Series Front Brake Kits

Wilwood DynaPro Big Brake front brake kits allow you to enhance conventional non-ABS spindles on machines providing big brake stopping power. These kits were developed for when dust-booted pistons are appropriate to provide added protection against dirt and debris in low temperature areas and rough environments. A full range of caliper finish and rotor designs provide options to individualize the style and preferences of any enthusiast. Kits come complete with calipers, rotors, hub assembly, brackets and hardware.

4.57 out of 5 stars ( 7 )

$1,272.96

The Right Stuff 4-Wheel Disc Brake Conversion Kits

The Right Stuff 4-wheel disc brake conversion kits offer everything that you need for your application in one kit without "braking" the bank. If you're experiencing brake fade or need more stopping power, The Right Stuff kits are manufactured from top-quality materials, to ensure performance and dependability. These 4-wheel disc brake conversion kits are the most complete packages available, so do the job right with The Right Stuff kits.

3.8 out of 5 stars ( 56 )

$1,439.70

The Right Stuff Hydraulic Brake Assist Power Brake Booster Kits

The Right Stuff offers hydraulic brake assist power brake booster kits in a variety of configurations for many different vehicles—including GM and GMC applications from the 1960s, '70s, and '80s. Hydraulic brake assist uses pressure from the power steering pump to provide braking boost, and includes a high-pressure accumulator that has enough capacity to provide several power-assisted stops in the event that the power steering pump belt breaks or a hose ruptures. Order the assembly recommended for fitment on your car or truck.

3.5 out of 5 stars ( 4 )

$1,097.10

MagnaFlow Street Series Performance Exhaust Systems

MagnaFlow Street Series performance exhaust systems deliver the smooth, deep sound you want—and the wide-open performance power you need! They feature straight-through flow designs for the ultimate in unrestricted horsepower and torque, while maintaining exhaust efficiency. These kits are an engineered balance of interior and exterior noise levels and are tested against SAE j1169 standards. Street Series components are built with 409 stainless steel and all mandrel-bent tubing. They're available in numerous configurations, including cat-back, rear axle-back, crossmember-back, and rear section; single, dual, tri, or quad turbo mufflers; and several outlet and tip options. Order the MagnaFlow Street Series performance exhaust tailored for your specific make and model. The systems carry a lifetime construction warranty.

4.4 out of 5 stars ( 616 )

$1,211.00

Summit Racing™ MSD Complete Ignition Combos

It's time to outfit your vehicle with a high-quality, high performance ignition system—and these MSD combos from Summit Racing™ make it a breeze! The kits start with a 6A digital CD ignition box, then add a high-efficiency Blaster coil and a Pro-Billet distributor. We finished the combos with a complete set of Street Fire wires to deliver all of that powerful spark! Wake up your street and strip engine with a powerful Summit Racing™ MSD complete ignition combo, available for applications as far back as the 1950s.

Not Yet Reviewed

$1,037.40

Classic Performance Show Stopper Hydraulic Brake Assist Kits

Classic Performance Show-Stopper hydraulic brake assist kits provide you a beautiful upgrade for your manual or vacuum-assisted brakes. They're designed to work off your standard power steering pump. The Show-Stopper kits include a chrome aluminum master cylinder, billet aluminum firewall mounting bracket, chrome accumulator cover, stainless pressure hoses, rubber return hoses, and all necessary fittings and mounting hardware. CPP also offers the hydraulic brake assist unit separately. Stop quicker with one of these Classic Performance Show-Stopper hydraulic brake assist kits.

4.5 out of 5 stars ( 16 )

$1,128.99

SPC Performance Control Arms

Adjust camber and caster for maximum handling and performance with these control arms by SPC Performance. These control arms allow for changes when fine-tuning suspension alignment angles. They're available for a wide variety of applications, such as street rods, sport compact, muscle cars, performance vehicles, and race cars. Fine tune your suspension with SPC Performance control arms.

4.58 out of 5 stars ( 162 )

$1,095.95

—

$1,216.99

On Sale

Hooker Super Competition Headers

With Hooker Super Competition headers, the objective has always been to make the maximum horsepower possible and put it at the optimum point in the power curve. Hooker Super Competition headers feature tuned primary tubes to create optimum pressure between the intake and exhaust systems. Hooker Super Competition headers include premium exhaust gaskets and new mounting bolts. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.

3.66 out of 5 stars ( 235 )

$1,499.95

$1,124.95

—

$1,299.95

1974 CHEVROLET NOVA Parts and Accessories