Availability
MSD Pro-Billet distributor plugs with cam sync are the perfect solution when running an aftermarket sequential EFI system with coil-per-cylinder ignition. The cam sync plug installs in place of a traditional distributor, providing a Hall-effect cam sync signal needed for the EFI system to reference the #1 cylinder. For wet sump applications, the plug also drives the oil pump. MSD cam syncs are plug-and-play with Holley EFI systems, and can easily interface with most aftermarket EFI systems. MSD cam sync plugs feature: * Built-in LED makes set-up and indexing quick and easy * Plug-and-play with Holley EFI and compatible with other aftermarket EFI systems requiring a cam sync signal * CNC-machined billet housing with black anodized cap provides good looks and excellent durability * Available with cast melonized, steel, or bronze distributor gear, depending on the application * Chevrolet version is supplied with an adjustable slip collar for blocks with a non-standard deck height
( 8 )
$349.95
—
$435.95
RideTech RidePro-HP Ride Height sensor kits upgrade your existing RidePro E5 pressure-based system. They work together to deliver the ultimate air suspension management systems measuring both pressure and ride height accurately. With the addition of RidePro-HP, ride height and spring balance (loads) are established by comparing the position of the ride height sensor to the air pressure within each air spring. Your car is leveled with no cross loading, which is especially important for dynamic driving scenarios where quick transitions occur, such as high performance driving, sudden directional changes, and panic stops. RideTech complete RidePro-HP kits include and feature: * Four ride height sensors * Four ride height sensor linkage kits * Group harness * 1/4 in. sensor bolts with Nyloc nuts and flat washers * Mounting tabs, heat shrink tubes, and installation guide * Easy installation * Heavy-duty ride height sensors * Bendable linkage rods with rubberized rod ends * Weatherproof connectors and wiring harnesses
( 1 )
$525.00
Motorcraft oil pressure switches will fix your jumpy gauge and prevent misreadings. Without the proper amount of oil, your engine will experience a lot of damage. If the oil light blinks or comes on, but the oil levels in the engine are fine, then a faulty oil pressure sensor may be to blame. Replace your faulty switch with genuine Motorcraft equipment, designed for durability and electrical performance.
( 12 )
$24.99
ACDelco Gold engine coolant sensors are a high-quality aftermarket replacement component for many vehicles on the road today. These premium sensors are manufactured to exceed your expectations for fit and performance. Order the model recommended for your application.
( 42 )
$23.99
Don't take chances with old, questionable, or faulty coolant temperature sending units that can give misleading information to you and your vehicle's computer. Standard Motor Products replacement coolant temperature senders are designed to exceed OEM specifications for dependable, accurate, maintenance-free operation. These temperature sensors are available in many sizes and configurations to fit a wide range of cars spanning several decades. Trust your vehicle's electrical system needs to Standard Motor Products.
( 99 )
$11.99
—
$54.99
ACDelco engine oil pressure indicator switches are quality replacement parts you can feel good about installing. They offer the fit, form, and function—along with value—you expect and want. ACDelco has a wide selection of components to optimize your GM vehicle's performance, as well as products to cover many other makes and models. Order the ACDelco oil pressure safety switch designed for your specific vehicle.
( 25 )
$7.99
—
$13.99
OER coolant temperature sending units are direct replacements that will restore reliable readings. Offering a proper fit for a hassle-free install, these sensors will efficiently relay electrical signals to your gauges to display accurate engine coolant temperature. OER coolant temperature sending units will ensure your gauge functions properly.
( 5 )
$10.99
—
$40.99
Malfunctioning MAP sensors can often cause problems, such as an intermittent check engine light, hesitation when accelerating, elevated emissions, and even poor engine performance. So, if yours is in need of replacement, do it with Delphi MAP sensors. These MAP sensors provide precise measurements of manifold absolute pressure. They are designed to perform in harsh environments, such as extreme temperatures, vibration, thermal and mechanical shock, and chemical contamination. Safeguard your engine with these quality MAP sensor components from Delphi.
( 19 )
$86.99
Keeping your engine cool is a big deal. Standard coolant temperature sensors offer fit and function to meet or exceed OE specifications for the peak operating performance of your vehicle's engine. Many functions of your vehicle depend on its coolant temperature sensor, so Standard sensors are 100 percent factory-tested to ensure trouble-free performance and extended service life. Do you have a check engine light? Replace corroded coolant temperature sensors with new ones from Standard Motor Products.
( 9 )
$15.99
—
$18.99
Crown Automotive coolant temperature sensors are a top-priority replacement for any vehicle. They're constructed out of high-quality materials and provide you with accurate coolant temperature data to the engine management system. When your vehicle's sensor is malfunctioning, you may experience inaccurate gauge functions, an overheating engine, internal engine damage, or excessive fuel consumption. All of these major issues can be solved with one simple little coolant temperature sensor from Crown Automotive.
( 10 )
$10.99
MotoRad coolant temperature sensors measure changes within the cooling system of a vehicle. This continuous measurement goes to the vehicle's powertrain control module (PCU) in order to help manage fuel injection, ignition timing, variable valve timing, and transmission shifting. MotoRad uses only the highest quality, OEM-approved premium materials and 100 percent factory resistance calibrated to ensure precision tolerances, resulting in highly accurate readings for optimal performance. A wide variety of MotoRad coolant temperature sensors ensure that most domestic and import applications are covered.
Not Yet Reviewed
$5.99
—
$256.99
Standard Motor Products T-Series replacement coolant temperature sensors are designed to meet the original equipment form, fit, and function. How well your vehicle performs depends on its coolant temperature sensor, so Standard T-Series sensors are manufactured from high-quality materials for dependability. If your check engine light is on, it could be to a faulty coolant temperature sensor. If that's the case, simply replace the worn, corroded coolant temperature sensor with a new ones from Standard Motor Products.
( 1 )
$8.99
—
$11.99
Spicer Drivetrain ABS tone rings help keep your ride in top form by giving your computer the proper information, letting it properly run your ABS readings. Incorrect sensor readings due to a dirty or corroded tone ring can cause erratic activation of your ABS system, and pulses at low-speed can be frustrating and dangerous. Spicer tone rings will maintain your vehicle's sensor readings and allow your ABS system to function at its peak.
( 1 )
$26.99
—
$52.99
ACDelco GM Genuine Parts engine coolant sensors are a GM recommended replacement component for many vehicles on the road today. These original equipment engine coolant sensors are manufactured to fit your GM vehicle, providing you the same performance, durability, and service life you expect from General Motors.
( 69 )
$19.99
URO Parts coolant temperature sensors are designed to meet or exceed OEM specifications for dependable, accurate, and maintenance-free operation. They are available for a variety of makes and models. Don't take chances with old, questionable, or faulty sensors or switches that provide inaccurate information to the vehicle's computer. Trust quality replacement URO Parts coolant temperature sensors for the correct data. Order the coolant temperature sensor that is suited to fit your vehicle's application.
( 1 )
$4.99
—
$5.99
ACDelco offers oil pressure safety switches for thousands of vehicles spanning more than half a century. These OE-style replacements are available in a variety of styles and materials, all manufactured to factory specifications for precise fit and performance. Order the model recommended for your application.
Not Yet Reviewed
$14.99
Protect your motorcycle's engine with ACCEL reliable oil pressure switches. They are designed to stringent quality control specifications, ensuring accurate pressure thresholds. Heavy-duty electrical contacts, brass pressure ferrules, rugged thermoplastic insulators, and corrosion-resistant plated steel shells are used for maximum dependability.
Not Yet Reviewed
$32.91
Holstein Parts oil pressure switches are made with the highest quality materials and manufactured to exacting standards to provide long-term function and performance. They are high-tech, OE-quality and are available to provide coverage for many domestic and import applications. When the engine oil pressure switch in your vehicle needs replaced, choose Holstein Parts to ensure the warning light will work properly, making you aware of a pressure drop.
Not Yet Reviewed
$4.99
URO Parts brake pad wear sensors are available for most models and perform exactly as OEM sensors for a fraction of the price. URO Parts has established a reputation as a supplier of OE-quality brake components. All their manufacturing facilities are ISO 9000 certified and every URO part undergoes one or more of the following measures: * Installation and use of the part in real-world conditions for a specified duration of time * Laboratory testing of strength, elasticity, stiffness, etc. under extreme conditions * Intensive inspection of each part against genuine samples and engineering drawings These brake pad wear sensors are available for hundreds of vehicles from the 1970s and up. Order the model recommended for your application.
Not Yet Reviewed
$2.99
PowerStop has a reputation for precision and adherence to the strictest OEM standards. Extending those standards, PowerStop's electronic brake wear sensors are designed to meet the same form, fit, and function as the original OEM part. Brake wear sensors wear down with the pads and illuminate the brake pad wear indicator light/warning. When that happens, it's time to replace the brake pads as well as the sensors. PowerStop electronic brake wear sensors are designed to withstand high-temperatures, assure excellent electrode conductivity, and they will continue to work after thousands of miles, providing the safety and performance drivers count on.
( 5 )
$2.83
—
$28.14
Having difficulty starting in cold weather? We're referring to your car, not you. Or, maybe you're seeing readings of overheating when all is normal. If your engine is giving questionable temperature readings or having trouble starting or running, you may need a new Beck/Arnley engine coolant temperature sensor. These quality-made sensors will signal your car's computer with the correct operating temperature to get the right amount of air and fuel flowing. Replace corroded sensors with Beck/Arnley engine coolant temperature sensors.
( 2 )
$13.99
URO Parts cylinder head temperature sensors are direct-fit OE replacements to restore sensor function for proper fuel delivery and engine performance in your European vehicle. Manufactured using high-quality materials to withstand engine heat, the alloy conductors minimize electrical resistance for accurate operation. And with guaranteed fitment, URO sensors provide easy plug-and-play connection.
Not Yet Reviewed
$16.99
Dorman ABS speed sensors are designed to supply information regarding wheel speed to the ABS computer. One of the most common omissions in maintaining a modern anti-lock brake system (ABS) is checking out the speed sensors. They are often located at each wheel hub/rotor on 4-wheel disc systems. Alternatively, on rear drum applications, you'll usually find them mounted on the differential housing. Under braking, if wheel speeds are unequal, indicating wheel lockup, the computer modulates the anti-lock feature until the speeds are equal again.
( 29 )
$43.99
Keep your vehicle safe with EBC disc brake pad electronic wear sensors. These units help keep you aware of how much material is left on your brake pads and indicate when you need to replace them. The EBC sensors are available for a variety of submodels from BMW and Audi, in particular.
Not Yet Reviewed
$12.71
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
