Availability
Showing In Stock Items. Show All 58 Items.
Quick Fuel Slayer Series carburetors offer affordability, great looks, and impressive adjustability. Economical horsepower performance is not a dream! Quick Fuel Technology has engineered their Slayer Series of 600 cfm and 750 cfm street carburetors with everything you want at a price you need to fit your budget. Their hand-built quality and all-aluminum construction are outstanding—but consider these additional features: changeable idle air and high-speed air bleeds, 3-stage emulsion circuits, changeable primary idle feed and power valve restrictions, vacuum secondary adjustment screw, and unique secondary metering plate with changeable jets. Pursue horsepower and get more dollar power with the carburetors that let you tune "your way" and offer show-quality appeal—Quick Fuel Slayer Series carburetors.
( 225 )
$511.95
—
$562.95
Street Demon carburetors redefine street carburetors with clean looks and ease of use. They offer enthusiasts a straightforward design to deliver stable idle, amazingly crisp throttle response, and smooth performance. With optimized calibration and a dual mounting pattern, they are ready to run right out of the box. The carburetors feature an integrated fuel bowl/main body design with the gasket above fuel level and have no plugged passages, eliminating all potential leak paths. Additional features include: * Available with either a ball burnished aluminum, polished aluminum, or black aerospace composite fuel bowl * One-piece air horn assembly with a single fuel inlet * Torsion spring valve control/adjustment permits seamless primary to secondary throttle response, regardless of the throttle opening rate * Dual mounting bolt pattern (square bore or spread bore) fits any street 4-barrel intake manifold. Adapter may be required. * Integrated 700R4/200R4 transmission kickdown cable mounting location * Ford automatic transmission kickdown * Inverted flare and 3/8 in. barb fuel inlet fittings
( 388 )
$511.95
—
$562.95
B&M truck shifters feature the classic Megashifter design, in a configuration that will fit your light truck! All of the things that you expect in a B&M shifter are right here and ready to install. The Truck Megashifters include a taller base and an adjustable floor mount bracket for proper installation.
( 57 )
$540.95
MSD Pro-Billet Ready-to-Run distributors are the perfect upgrade for weak OE electronic distributors, outdated points distributors, and large HEIs or DuraSparks. All that's required is to install the distributor in the engine, and connect three wires and the coil! A maintenance-free magnetic pickup accurately triggers this ignition with increased output from the amplifier, easily outperforming stock ignitions. It will smooth out the engine's idle, improve starting, and perform at a much higher rpm. The housing is machined from billet 6061-T6 aluminum, using state-of-the-art CNC mills and lathes for a unit with no porosity or weak areas. For stability and endurance, an oversized steel shaft spins in a top-mounted sealed ball bearing, while an extra-long sintered bushing guides the shaft at the base of the housing. This shaft also receives a QPQ coating for low friction wear and resistance against corrosion from humidity and ozone buildup. The distributors feature MSD's adjustable mechanical advance, which allows you to custom-tailor an ignition curve to match your engine's needs. Most models are also available with a vacuum advance canister to help improve economy. Order the model recommended for your vehicle and engine application.
( 329 )
$635.95
—
$716.95
On Sale
Precise timing control—Holley EFI dual-sync distributors are built with two Hall effect sensors for crankshaft and camshaft signals. The distributors can be used as just a crankshaft speed input or provide a camshaft sync signal for sequential fueling operation. They're also useful for crank and cam signals when running coil-on-plug applications. Dozens of models are available; order the one recommended for your vehicle/engine application. Some features of Holley EFI dual-sync distributors include: * CNC-machined billet aluminum housings with integrated LEDs for easy setup * Hardened steel distributor gear * Precision-machined shutter wheels that ensure accurate timing—even at very high RPM * Designed to be plug-and-play with Holley systems, but may be used with other EFI systems that support Hall effect crankshaft and camshaft sensors * Housings are available in a variety of finishes
( 37 )
$511.95
—
$716.95
LEED rear disc brake conversion kits add the safety, reliability, and performance of disc brakes to your vehicle. These kits are a direct bolt-on with no cutting, drilling, or welding required. All components are new, high-quality, and precision-machined. The heavy-duty parking brake caliper will allow you to use your stock parking brake cables to actuate the parking brake.
( 19 )
$749.99
Increase your street machine's gas mileage and powerband performance! COMP Cams High Energy cam and lifter kits are designed for street engines with an 8:1 to 9:1 compression ratio. They also work well with all stock components, including intakes, exhaust manifolds, and carburetors. These kits offer good increases in both gas mileage and power throughout the rpm range for most street applications.
( 184 )
$550.95
—
$571.95
Quick Fuel HR-Series carburetors are packed full of the features that you'd expect from a high performance carb. They're available in your choice of vacuum or mechanical secondary versions, and you can select the cfm that's right for your specific engine combination. The Quick Fuel HR-Series carburetors feature screw-in air bleeds, QuickSet sight windows in the fuel bowls, 4-corner idle circuits, screw-in idle restrictions, and a bright, shiny finish for durability.
( 48 )
$716.95
MSD Pro-Billet Street distributors are a popular choice for those who desire race-proven performance for their street machine. A vacuum advance canister provides improved economy, and the proven MSD mechanical advance mechanism allows you to dial in a timing curve to fit your needs. As always, an advance kit of springs and stop bushings is included. The housing features an all-billet 6061-T6 aluminum design for accuracy to within .001 in. An oversized steel shaft is QPQ-coated for low friction, and rides in sealed ball bearings at the top and bottom of the distributor. An extra-long sintered bushing replaces the ball bearing at the bottom for Chevrolet models. This combination keeps the shaft steady, creating accurate spark delivery at any rpm. They rely on a magnetic pickup to trigger the MSD ignition control, which delivers the powerful sparks to the coil. This pickup is extremely accurate and never needs adjusting. Pro-Billet Street distributors require the use of a separate ignition box, such as an MSD 6, 7, 8, or 10 Series ignition. Order the model recommended for your vehicle and engine application.
( 115 )
$562.95
—
$716.95
COMP Cams Xtreme Energy cam and lifter kits are built to take advantage of the latest cam technology and provide maximum performance. Whether your use is off-roading, towing, or street performance, there are Xtreme Energy options available for you. By using an aggressive lobe profile, they provide better throttle response and more top-end horsepower than equivalent kits from other manufacturers, while delivering increased engine vacuum. Order the model designed for your vehicle and engine application.
( 388 )
$647.95
A higher-than-stock stall speed as delivered by these B&M Holeshot converters will provide several advantages and benefits to vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low-end power and torque. These high-stall converters allow the engine to launch the car at higher rpm, where more torque is available. They're a very good choice for the typical street machine that is looking for better launch capability and more strength.
( 83 )
$540.95
—
$716.95
These Meziere True Start 400 series high-torque starters are recommended for all high-compression, large displacement engines up to 700 cubic inches and supercharged applications. They feature custom gear reduction for the best cranking power and rotational speed. Their innovative billet aluminum head design provides the strongest drive gear support without an external nose support. The starter block features a full 360 degrees of clocking positions in 10 degree increments. Meziere True Start 400 Series high-torque starters feature an offset design that clears all kickout style oil pans.
( 17 )
$679.06
RideTech RidePro-HP Ride Height sensor kits upgrade your existing RidePro E5 pressure-based system. They work together to deliver the ultimate air suspension management systems measuring both pressure and ride height accurately. With the addition of RidePro-HP, ride height and spring balance (loads) are established by comparing the position of the ride height sensor to the air pressure within each air spring. Your car is leveled with no cross loading, which is especially important for dynamic driving scenarios where quick transitions occur, such as high performance driving, sudden directional changes, and panic stops. RideTech complete RidePro-HP kits include and feature: * Four ride height sensors * Four ride height sensor linkage kits * Group harness * 1/4 in. sensor bolts with Nyloc nuts and flat washers * Mounting tabs, heat shrink tubes, and installation guide * Easy installation * Heavy-duty ride height sensors * Bendable linkage rods with rubberized rod ends * Weatherproof connectors and wiring harnesses
( 1 )
$525.00
On Sale
MSD Pro-Billet distributors share the same CNC machining techniques as the rest of the MSD distributor line. They feature a housing that's machined from high-quality 6061-T6 aluminum for durability and show-quality looks. Their oversized shaft receives a QPQ coating for friction reduction and corrosion resistance, with the added strength of two sealed ball bearings that guide the shaft accurately at well over 10,000 rpm. An extra-long sintered bushing replaces the ball bearing at the bottom of Chevrolet models. TIG-welded on top of the polished steel shaft is MSD's accurate mechanical advance assembly. The weights are supported by nylon pads that allow the advance to operate smoothly throughout the rpm range. For all-out racing, the advance mechanism can also be easily locked out. To accurately trigger the ignition, a high-output magnetic pickup is bolted to the base. This pickup produces a precise trigger signal that will never vary more than one degree at any rpm. A durable gear is installed for performance applications, and an MSD red cap with brass terminals and race rotor is supplied. They're available in standard and small diameter models for applications with limited clearance, and require the use of a separate ignition box such as an MSD 6, 7, 8, or 10 Series ignition.
( 405 )
$511.95
—
$637.95
COMP Cams is bringing the muscle car sound back, and it's nastier than ever! Let's face it--few things serve to grab our attention at a car show or cruise night more than a car with a thumping, high performance idle. In an ongoing quest to provide you with the performance and sound you demand, COMP Cams engineering team proudly introduces the Thumpr Series cam and lifter kits. The lobe profile and grind characteristics of these Thumpr camshafts use a combination of an early exhaust valve opening, a long exhaust duration, and a generous amount of intake and exhaust overlap to maximize the rough-idling characteristics of the cams. This gives you a seriously aggressive exhaust note without negatively impacting the power output or streetability of the engine. Thumpr camshafts are available in different grind profiles; each one will produce a rough, racy exhaust note and impressive amounts of horsepower and torque within a different rpm range. Thumpr Series cam and lifter kits deliver a substantial power increase over an identical hydraulic flat tappet grind without sacrificing reliability or ease of maintenance.
( 212 )
$726.95
Using only three parts (a laser-welded sealed housing, an internal inertia ring, and highly viscous silicone fluid between the two), SFI-approved Fluidampr harmonic dampers can control all crankshaft vibration--not just a limited frequency range. As a result, you get reduced wear on the main bearings and timing gear, more stable valvetrain operation, and less chance of crank failure.
( 144 )
$503.73
—
$571.35
Hays Twister 3/4 Race performance torque converters are designed to be the perfect solution for your street/strip machine. Hays designed the Twister torque converters to be one step short of being a "Full Race" converter giving you the perfect combination of performance and affordability. Every torque converter is hand built, inspected and tested to ensure they meet the top of the line quality you expect. To ensure consistency and improve performance each converter is built for one transmission with one bolt pattern, meaning a lighter converter to maximize performance. High flow stators promote better cooling and heavy duty Torrington bearings are used to increase strength and durability. Not ready to go a "Full Race" converter, Hays is there for you with their Twister 3/4 Race torque converters.
( 11 )
$529.95
—
$716.95
These Mallory Unilite distributors give you accurate, maintenance-free ignition timing. Instead of old-fashioned points systems, they have photo-optic, LED-triggering systems that never vary or wear out. You get increased rpm potential, improved combustion, longer spark plug life, and better cold-weather starting. Hooking one up is a simple 3-wire connection, and they come with your choice of adjustable mechanical and/or vacuum advance, self-lubricating bushings, and a Super-Duty cap and rotor.
( 57 )
$614.95
Tork Master converters are B&M's most affordable performance torque converters. They feature precision pump drive tubes and are pressure tested, fully balanced, and ready to install. The Tork Masters are excellent all-around performance street converters. They are not recommended for big block or supercharged applications.
( 184 )
$529.95
—
$699.95
Do you need to upgrade your ignition system due to a recent Sniper EFI installation, but have no idea which option is best? Introducing Holley Sniper EFI HyperSpark distributors. These billet distributors use a hall-effect crank signal sensor, providing a noise-free RPM signal to the Sniper ECU. HyperSpark distributors include a patented clear installation cap that eliminates any confusion when installing the distributor. They're an easy plug-and play solution to add timing control and complete your Sniper EFI installation. Many options are available; choose the model recommended for your year/make and engine application.
( 127 )
$511.95
MSD billet distributors are one of the finest street performance and racing distributors available. The distributor housings are precision-machined on CNC lathes from billet 6061-T6 aluminum to within +/- 1/1,000 in., producing a housing that's stable, lightweight, and less prone to flex. They feature an upper-sealed ball bearing to guide the distributor shaft and prevent shaft wobble at high rpms, and O-rings at the bottom of the base for improved oil control. The shaft is polished and QPQ-coated to minimize friction and allow the distributors to operate through 10,000 rpm. An adjustable mechanical advance assembly allows you to accurately and easily modify the advance curve to match your specific application. MSD premium distributors come complete with a race rotor and alkyd cap.
( 84 )
$539.95
Cable-operated B&M Megashifters have reliable ratchet action and a competition 4-speed look that complements any vehicle. With a reverse lockout and neutral safety switch, the Megashifters meet NHRA and IHRA requirements. Unless otherwise noted shifters include a lighted gear indicator, a polished aluminum T-handle, cable, hardware, and console.
( 144 )
$528.95
Lighter means quicker! Heavy flywheels rob power from your engine and reduce its ability to rev and respond quickly. McLeod's aluminum flywheels can take a big bite out of those losses. They're made from quality aluminum and come with steel-insert friction surfaces. Ring gears are held in place with welded and riveted tabs, and all flywheels are drilled to accept balancing weights for externally balanced engines.
( 8 )
$545.00
—
$595.00
Having a huge blower mounted on top of your engine is cool, but it can lead to limited choices for a distributor. The same goes for tri-power carburetor setups and big air cleaner assemblies, so MSD decided to morph their crab cap crank trigger distributor with a standard Chevy model to come up with a flat-top model! These MSD Flat-Top Pro-Billet distributors sit low in the engine block, and are topped with MSD's special crab cap that positions the spark plug terminals horizontally to give you plenty of clearance. These distributors incorporate a mechanical advance assembly that you can easily tune with the supplied springs and stop bushings. For trigger accuracy, a maintenance-free magnetic pickup is used. This pickup plugs directly into an MSD ignition control. The Flat-Top Pro-Billet distributors are supplied with a Dupont Rynite-molded distributor cap and rotor, along with a heavy-duty gear for long life in your engine.
( 9 )
$649.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
