Availability
Showing In Stock Items. Show All 173 Items.
Are you looking for a set of entry-level street performance heads for your modern street rod, muscle car, or truck? Edelbrock E-Street cylinder heads are just the ticket. These heads feature A356 aluminum castings that are heat-treated to T-6 specs for superior casting strength and quality. Their modern combustion chamber design helps to improve the combustion process and their larger-than-stock intake and exhaust ports help to move more air through your engine. These features improve an engine's efficiency, resulting in more horsepower and torque and improved mileage potential. All Edelbrock E-Street cylinder heads are assembled with manganese bronze valve guides, powder metal interlocking valve seats, and stainless steel one-piece valves with hardened valve tips. Edelbrock E-Street cylinder heads are ideal for entry level street performance engines.
( 119 )
$1,291.95
—
$1,343.50
Wilwood Forged DynaPro 6 Big Brake front brake kits offer enhanced street performance and stopping power for your American muscle and vintage hot rods. Traditional non-ABS spindle vehicles benefit from the combination of Wilwood forged billet 6-piston DynaPro calipers and your choice of high performance rotors (including their SRP drilled and slotted with E-coat) and Smart Pad brake pads. Wilwood Forged DynaPro 6 Big Brake front brake kits will complement your street/strip ride with improved braking capacity, performance, and looks.
( 89 )
$1,302.73
—
$1,440.23
Holley Sniper EFI HyperSpark distributor kits were designed to make upgrading your ignition on a Sniper EFI-equipped engine simple. When installed concurrently with a new Sniper EFI system, the combination creates the easiest way to install EFI conversion on the market—and only four flying lead connections are required! The harness only requires one connection to a switched power source, battery positive, battery negative, and fuel pump power. The pre-terminated connectors and a built in 40A relay provides power to all of the components within the system. With the included Sniper EFI main harness you no longer need to run multiple wires to provide switched power for each individual component, which not only helps prevent wiring confusion, but it will also speed up your install time and clean up your engine bay. Simply route the harness and pre-terminated connectors to your HyperSpark coil, distributor, and ignition box and plug them in. Available for all popular engine combinations, these kits come with a distributor, coil, ignition box, and an integrated Sniper EFI harness. Order the application you need. Key features: * Plug-and-Play Sniper EFI main harness replaces the standard Sniper EFI harness with four loose leads, battery positive, battery ground, switched 12 V, and fuel pump power, for a simple and streamline installation * Designed for existing or new Sniper EFI installations (the HyperSpark Master Kit harness retains the same flying lead wire colors as the Sniper EFI main harness; new installations will not use the Sniper EFI standard harness or coil driver * Complete ignition system in a box, including: HyperSpark ignition box, HyperSpark ignition coil, HyperSpark distributor (for your application), and a plug-and-play main harness * HyperSpark distributors feature a Hall Effect crank trigger sensor providing a noise-free rpm signal to the Sniper ECU * Patented clear installation cap eliminates any confusion while installing the distributor * HyperSpark CD ignition box is seal and powder coated to be installed in the harshest of locations * External LED on HyperSpark CD Ignition box helps verify 12 V, cranking rpm, and low battery voltage * 135mJ of spark energy when used with the HyperSpark ignition coil, ensures complete combustion * Integrated ignition coil bracket simplifies mounting the Ignition coil * Ignition coil connector removes any doubt of loose connections at the Ignition coil * Enables timing control on a Sniper EFI Installation
( 22 )
$1,024.95
Edelbrock Performer RPM aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. These heads offer improved power throughout the RPM range for greater throttle response and top-end horsepower. Countless options are available; order the model recommended for your vehicle and engine application.
( 167 )
$1,040.50
—
$1,295.50
Wilwood's Forged Dynalite Pro series front disc brake kits are designed to provide unmatched performance with classic, high-tech styling for a wide variety of street rods, musclecars, hot rods, and heavy drag cars. The kits combine the powerful clamping force of Dynalite calipers with the added performance and cooling capacity of competition-style vented rotors. Other features include hubs, brake pads, caliper brackets, mounting hardware, and detailed instructions for an easy bolt-on installation. In addition to everything else, these kits can also cut as much as 35 lbs. off of your front-end.
( 200 )
$1,057.29
—
$1,194.79
Get cool with Vintage Air! Their Gen 5 SureFit evaporator kits assist with providing powerful and intelligent climate control for your vehicle. These kits utilize an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments. Additionally, they include variable blower speed and dash/floor/defrost blend. Vintage Air Gen-V SureFit evaporator kits include the evaporator unit and mounting brackets, louvers (where required), duct hose wiring harness, hardware, and installation instructions, along with either a bolt-in replacement control panel or Vintage Air's patented electronic cable converters to use with your factory system controls. Choose the kit designed for your vehicle. Features and benefits: * Engineered to cool your vehicle faster than ever * Improved diagnostics and advanced systematic fail safes * Multiple mounting options for an easier installation * Rubber well-nut mounting points for improved NVH isolation * Separate high-capacity A/C and heater coils with blend air door for rapid vent temperature adjustment * OEM block-type expansion valve * Injection molded case for optimal precision, strength and quality * Injection molded blend air doors with integral rubber seals * Removable access covers for coil service * Interchangeable defrost and floor heat plenums for increased mounting flexibility * Powdercoated steel mounting brackets * Quiet high-performance blower
( 16 )
$1,417.99
Better than stock replacements--ididit retrofit steering columns are designed to ensure a perfect fit and a flawless installation in your specific vehicle. The hot rod experts at ididit engineered these columns to fit in the factory location and, in many cases, will put your steering wheel back in its original location. Your column may include (depending on your application) 8-position tilt, self-canceling turn signals, 4-way flashers, a shaft, knobs, levers, and a wiring plug. Fitting your Ford, Chrysler, Chevy, or even Mopar classic with a perfectly planned aftermarket steering column is easier than ever, thanks to ididit retrofit steering columns.
( 218 )
$1,056.00
—
$1,271.00
Flaming River tilt floor shift steering columns feature large tube diameters and compact shrouds to create a unique custom look. Designed specifically for use with floor shifters and available in a variety of styles, lengths, and shaft sizes, they come complete with a billet dress up kit (tilt, turn signal lever, and hazard knob), and wiring. They are manufactured from high-quality 304 grade stainless steel, will never rust, and are available in a variety of finishes--including a paintable mill finish, black powdercoated, or polished. Mill finish columns are shipped chemically clean and can be painted to match or highlight any interior with only minor preparation. Key column units (see Ignition Key Location above) include an integrated ignition key located at the 3 o'clock position, with no welded-on attachments or extra relays required. Keyed columns are complete with a key assembly, wiring, and ignition switch.
( 108 )
$1,010.99
—
$1,228.99
Experience is in Doug's Headers DNA. They have been a respected name since the 1960s and remain one of today's most popular brands among muscle car enthusiasts who don't sacrifice quality and fit when it comes to their vehicle. Doug's stainless steel headers will give the greatest increases in horsepower and torque across the entire rpm spectrum, and they are meticulously designed to provide maximum power and the highest quality available. Available in many fitments, choose a set designed for your vehicle. Key features: * 304 stainless steel construction to prevent rust and corrosion * 3/8 in. thick machined flanges to prevent warping * Mandrel-bent tubes for an accurate fit and improved flow * Precision formed long transition collectors reduce backpressure * Header tubes have a natural stainless finish * Necessary mounting hardware, collector reducers or connector pipes, premium gaskets, and detailed installation instruction sheets are included
( 28 )
$1,059.90
—
$1,386.15
With Wilwood Forged Dynalite Big Brake front brake kits, you'll be ready for show, street, or strip! Track-ready performance and high-tech style come with oversized rotors, forged billet Dynalite calipers, and high performance Wilwood SmartPads. These front brake kits are fully compatible with OE master cylinder output. Options for the caliper finish and rotor design make it simple to match the brake response and style preferences on all types of daily drivers, race vehicles, and ultra-styled show machines! The choice is yours for big stopping power--choose Wilwood Forged Dynalite Big Brake front brake kits.
( 133 )
$1,100.60
—
$1,436.24
Edelbrock Performer RPM 454-O high-compression cylinder heads offer smaller ports for bigger performance. Designed for big block Chevy's with oval ports, these cylinder heads feature unique oval intake ports that flow similar to rectangular ports but the smaller size provides excellent seat-of-the-pants performance plus crisp throttle response! And, the 100cc chamber volume is ideal for your high-compression application. Both the intake and exhaust ports of these Performer RPM heads have been profiled for improved air flow and they have smaller-than-stock valve stems for less weight and excellent flow. More flow, more power, and more performance for your big block application comes with a set of Edelbrock Performer RPM 454-O high-compression cylinder heads.
( 13 )
$1,214.50
UniSteer Camaro/Nova rack and pinion kits are superior steering components designed with racers in mind. They're engineered to match the factory geometry for specific Chevy model years—resulting in no-bump steering. These racks come mounted on a custom bracket that makes installation a breeze. The unit mounts to the rear of the crossmember, bolting to the lower stock control arm bolts. The outer tie rod ends are bolted to the stock steering arms; no fabrication is required. Compact and lightweight, the parts offer maximum ground clearance and can drop up to 65 lbs. off the stock front end. UniSteer rack and pinion kits also include outer tie rods, mounting bracket, hardware, and instruction sheet for installation. Order the conversion kit tailored for fitment on your vehicle. UniSteer stands behind their products with a 2-year, Unlimited Mile Warranty.
( 18 )
$1,143.99
These Quick Fuel SS-Series carburetors are designed to offer the power of a race carburetor in a streetable package that weighs 5 lbs. less than other carburetors. Manufactured completely from aluminum, they allow you to change the idle feed and offer power valve channel restrictions and idle and high-speed air bleeds for the ultimate in tunability. The solid-state, electric-choke Quick Fuel SS-Series carburetors have billet throttle bodies, billet metering blocks, 4-corner idle systems, secondary jet extensions, and notched secondary floats. The vacuum secondary carburetors feature fuel bowls with a single-sight glass window, while the mechanical secondary carburetors have dual-inlet, dual-sight glass 4500-style fuel bowls and include additional links to tune the secondary opening rate. Quick Fuel has done it--they've created all-aluminum Super Street carburetors that are perfect for your high performance street machine.
( 48 )
$1,024.95
All Edelbrock aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. They offer improved power throughout the rpm range for greater throttle response and top-end horsepower. The intake and exhaust runners are CNC-machine profiled for superior flow and performance.
( 41 )
$1,059.50
—
$1,251.50
Get big-time performance with Quick Fuel Q-Series 4-barrel carburetors with high-flow main bodies, which include either down-leg or annular boosters, screw-in idle and high-speed air bleeds, accelerator pump discharge nozzles, and a blended venturi area. These carburetors have CNC-machined billet metering blocks with 4-stage emulsion to provide more precise fuel metering, improve throttle response, and give a more uniform fuel performance curve. With so many great benefits and their blend of performance and drivability, it's no wonder that these Quick Fuel Q-Series carburetors are the popular choice. So, go ahead--throttle it up with Quick Fuel!
( 46 )
$1,126.95
—
$1,499.95
Intended for the high horsepower street/strip fan, McLeod RXT 1200 twin disc clutch kits are able to handle 1,200 crank horsepower. With a higher clamp load than standard RXT twin disc clutch kits, RXT 1200 clutch kits can handle almost any horsepower you can throw at them and still remain streetable. Ceramic-lined clutch discs provide smooth engagement with a stock-like pedal feel to make them ideal for the street performance enthusiast. A flat-style flywheel with a crank relief of 6.250 in. diameter or less is required for proper fitment.
( 12 )
$1,295.00
Ultimate Headers 321 Stainless Steel Headers integrate a cutting-edge, patented design, created specifically for maximum performance and minimal weight, with 3D-engineered flanges, and superior 321 stainless steel to deliver a unique combination of elegance and horsepower. Born in World War II for aircraft engine exhaust manifolds by adding titanium to basic nickel/chromium alloy steel, 321 stainless provides reduced weight, plus increased resistance to material fatigue and thermal cracking in high-heat environments. Finite Element Analysis (FEA) processes are used to create Ultimate Headers and the unique Ultimate Flanges with their signature, high-tech, ribbed reinforcements that reduce weight, improve flange cooling, and lessen heat-induced warpage; while providing the required clamping forces to eliminate leakage. Ultimate 321 Stainless Steel Headers' tight radius, investment-cast, 316L stainless steel elbows immediately turn the header tubes away from the exhaust ports with a radius smaller than the tube diameter (which can't be done using a tube bender); holding the header tubes close to the block—perfect for engine swaps. Investment casting also maintains the desired wall thickness and avoids the thinner sidewall created by tube bending at the point where exhaust gas temperature and volume are at their highest. These benefits, combined with the advanced Cometic MLS (multi-layer stainless steel) header gaskets included with each set of headers, give Ultimate Headers 321 Stainless Steel Headers the leading edge when it comes to adding a total performance-enhancing exhaust system. Features include: * Patented design * Includes premium corrosion and heat-resistant ARP 12-point, 300 grade stainless steel bolts and washers * Jig fixture, TIG-welded for precise quality control * Easy to install * Header tubes are mounted high and tight for a compact, space efficient package away from steering shafts and frame rails * Eye-catching flanges add dramatic improvement to the engine compartment * Available styles include rear-dump and block-hugger designs * Available in a variety of finishes, including mill, satin, mirror polish, ceramic coated silver, and ceramic coated black *Ultimate Headers Cast Header Flanges or Extreme Low-Profile Clamps (both sold separately) are recommended for the end of the collectors
( 5 )
$1,379.00
MagnaFlow Street Series performance exhaust systems deliver the smooth, deep sound you want—and the wide-open performance power you need! They feature straight-through flow designs for the ultimate in unrestricted horsepower and torque, while maintaining exhaust efficiency. These kits are an engineered balance of interior and exterior noise levels and are tested against SAE j1169 standards. Street Series components are built with 409 stainless steel and all mandrel-bent tubing. They're available in numerous configurations, including cat-back, rear axle-back, crossmember-back, and rear section; single, dual, tri, or quad turbo mufflers; and several outlet and tip options. Order the MagnaFlow Street Series performance exhaust tailored for your specific make and model. The systems carry a lifetime construction warranty.
( 612 )
$1,115.00
—
$1,153.00
If you need to replace your old door panels or want to upgrade your classic car to a deluxe interior, choose CA deluxe molded door panels. Each door panel is made with the best material and craftsmanship and has been engineered to meet or exceed OEM specifications to ensure a perfect fit and finish. Select the interior door panel for your vehicle make and model.
Not Yet Reviewed
$1,462.99
DeWitts Pro-Series direct-fit radiator modules install in the stock mounting position and use the factory connections without any modifications or adapters. Expertly assembled and then furnace-brazed, their epoxy-free cores feature two rows of 1.00 inch cooling tubes and a serpentine fin. The radiators' press-formed end tanks are manually TIG-welded by skilled craftsmen to provide the ultimate in strength and appearance. Included is an aluminum shroud with a Spal electric fan mounting in position, one wire harness, and a temperature switch; some models also have a built-in transmission cooler. DeWitts Pro-Series direct-fit radiator modules are available in crossflow and downflow styles, as well as a range of sizes for vehicle-specific applications.
( 41 )
$1,420.99
PWR North America heat exchangers are just one of many options you have from PWR to help keep your oil cool. These heat exchangers feature a superior design that utilizes high-quality materials to give your vehicle the highest performance possible even under the most extreme conditions. When you're crammed for space, these heat exchangers are the perfect route to go to help you place your heat exchanger in an alternative location. They are available in single-pass or dual-pass options to give you all the cooling you could ever ask for and will work great on any vehicle you're driving, whether it be a sports car, 4-wheeler or high performance street rod.
( 2 )
$1,069.00
BMR A-arms stabilize your vehicle. A-arms are one of the most important, yet overlooked suspension components. They are the direct link between the front wheels and the chassis. Any deflection causes a change in alignment, which results in poor performance and driving feel. BMR Suspension A-arms are fabricated from heavy-duty 0.095 in. wall DOM tubing with laser-cut, CNC-formed plate steel for extra strength and to eliminate deflection. BMR A-arms are fitted with heavy-duty ball joints and 95-durometer polyurethane bushings for a solid, more responsive feel over the stock rubber bushings. Polyurethane adds strength and reduces deflection over the stock rubber bushings, while still absorbing much of the NVH, providing you with a great blend of performance and comfort. Designed for street performance, drag race, handling, and pro-touring applications, BMR A-arms give you improved geometry and increased lateral grip during cornering situations.
( 110 )
$1,029.95
Change the look of your vehicle's interior with these Summit Racing™ seat and bracket Pro Packs. They include a pair of Scat seats with a reclining lever, seat brackets, and adjustable sliders for a complete bolt-in installation. The side bolsters and high density molded foam cushions provide a great ride and help you get more comfortable in your vehicle. Available in your choice of vinyl or velour, the Summit Racing™ seat and bracket Pro Packs will make excellent additions to any vehicle.
( 103 )
$1,210.96
McLeod Street Twin clutch kits are designed to be high performance replacements for your OEM clutch. They include everything you need--a new disc, pressure plate, and your choice of a billet steel or billet aluminum flywheel. McLeod Street Twin clutch kits are pre-balanced to fit specific applications and include the correct alignment tool for installation.
( 4 )
$1,125.00
—
$1,399.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
