Availability
Showing In Stock Items. Show All 196 Items.
Optima RedTop Starting 12-volt batteries are the ultimate power source for cars, trucks, SUVs, hot rods, and other high-performance vehicles. They're engineered with unique Spiralcell technology, delivering a stronger burst of ignition power, while extending the battery life up to three times longer than conventional models. Maintenance-free RedTop AGM batteries are sealed, leak-proof, and resistant to vibrations—so you can mount them anywhere and in virtually any position on your vehicle. Order the Optima battery designed for your application, and expect a perfect start every time.
( 1519 )
$249.99
—
$279.99
Powermaster street alternators feature all of the quality construction and dependability the company is famous for. The "electrical generators" are available in a variety of amperages and styles, allowing you to choose the best model for your specific ride and the accessories you run. So whether you need an alternator for your truck, hot rod, musclecar, sport compact, or audio competition vehicle, Powermaster gives you the power you need to get it started and keep it going.
( 1784 )
$134.99
—
$255.99
Lares new (not remanufactured) power steering pumps are engineered to OE specifications to ensure proper fit, form, and function. They're manufactured from the same high-quality materials as your original components to provide long-lasting performance. Over a hundred models are available, with or without an included reservoir, for vehicle and engine applications from 1960 and up. Order the replacement pump recommended for your ride.
( 134 )
$136.99
—
$170.99
PerTronix Ignitor® solid-state ignition systems deliver more energy with greater timing accuracy. The secret lies in the trigger magnets, which spin with the rotor and operate a switching module that requires no external control box. These systems are immune to heat, oil, and debris—and install in about 15 minutes with only two wires to connect. They come with a switching module, hardware, and instructions. Ignitor® is an ideal choice for collector car restoration because it fits entirely under the distributor cap.
( 999 )
$125.15
Borgeson universal self-contained Saginaw GM power steering pumps offer you options. These new pumps are built with all new components; assembled and tested in the USA. Available in chrome or black finishes and includes pulley.
( 87 )
$165.05
—
$237.04
Not ones to leave well enough alone, the engineers at PerTronix set out to improve upon their highly successful Ignitor® ignition conversion systems. The Ignitor II® conversion systems have all of the same quality features as the original Ignitor®, plus a powerful microprocessor controller to deliver, on average, 4x more available energy between 3,000 and 5,000 rpm than standard ignition systems. They're an ideal choice for collector car restoration because they fit entirely under the distributor cap. Order the model recommended for your year/make, distributor and engine application. Features include: * Compatible with 12 V negative ground systems and any induction coil * High-rpm performance is improved when used with the PerTronix Flame-Thrower II super low- resistance (0.6 ohms) 45,000 V coil * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops, on average, 2x more available plug voltage * Peak current level is reached just prior to spark for maximum energy without heat build-up, increasing coil and module life * Never change points again * Adjusts spark timing at higher rpm to compensate for the inherent electronic delay * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * Cannot be used with solid core spark plug wires; suppression-style or spiral-wound spark plug wires must be used
( 294 )
$185.65
Summit Racing™ Electronic Distributor Conversion kits allow you to Convert your factory single point distributor to a true 1 wire solid state ignition. Simply remove and replace your points and condenser with the solid state breakerless ignition module. Simple stealth 1 wire hookup is perfect for 100 point type restorations as it is undetectable. Never deal with breakdowns or adjusting worn or burned points again with a Summit Racing™ Electronic Distributor Conversion kit. • 1 Wire Hook-Up, just connect to the original points wire • Completely stock appearing • Fits inside 57-74 Delco Window cap distributors • Auto-standby prevents coil damage or dead battery if the ignition is accidentally left on • Active dwell control maintains high rpm spark energy while reducing coil heating at idle. • Hall effect rotary-vane sensor design compensates for worn bearings and distributor end play. • Magnetic sensor is unaffected by oil, dirt or other contaminants, unlike optical systems. • Over-voltage/over-current protected against damage from high amp battery chargers, reversed battery, or improper wiring • No distributor modification, disassembly, or removal is required , use SUM-RP20594 For New Repl. Black Ground Wire To Finish The Conversion.
( 10 )
$167.99
Powermaster's highly efficient XS Torque starters feature extra-powerful motors that churn out up to 200 lbs.-ft. of torque. Coupled with their 4.4:1 gear-reduction ratio, that equals reliable cranking power for engines, up to a whopping 18.0:1 compression ratio. These starters come with a billet adapter/mounting block for durability. They'll also clear your oil pan if the OE starter did. Some models are available in a chrome plated finish. Starter dyno test results are included. Order the replacement designed for your vehicle application.
( 898 )
$251.99
Powermaster smooth look alternators feature unique styling, with all sharp lines and edges blended for a truly smooth look. These alternators are available in a polished, brushed/satin, black powdercoated, or a chrome plated finish. They come with an exclusive tear drop design, detailed with features that match the case.
( 158 )
$162.99
—
$236.99
These PerTronix Ignitor III® solid-state ignition systems feature an adaptive dwell that maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance. Peak current level is reached just prior to spark for maximum energy without the heat buildup, increasing coil performance and module reliability. They adjust spark timing at higher rpm to compensate for the inherent electronic delay, sense startup, and develop more energy for quicker, easier starting. The PerTronix Ignitor III® solid-state ignition systems have a built-in LED for user feedback confirmation of the rev limiter setting.
( 83 )
$183.81
Replace the alternator in your early GM, Ford, or Chrysler, while retaining its original look, with a Powermaster retro alternator. All of the alternators conform to the proper size and appearance of yesterday—while incorporating the technology of today. Plus, they all utilize OEM finishes and wiring hookups for a trouble-free installation. Retro alternators are available in a variety of case and pulley styles, amperage outputs, and wiring capabilities. Order the model designed for use on your vehicle.
( 337 )
$134.99
—
$182.99
Gabriel Load Carrier shocks are the perfect combination of shock and spring technology to help reduce the loss of ride height in ongoing loaded conditions. These front and rear spring-assist shocks feature a chromed piston rod to inhibit corrosion—as well as ensure proper seal lubrication and provide a more consistent wear surface. Load Carriers also have a leakproof design to help prolong their life. Models are available for hundreds of vehicle-specific applications.
( 228 )
$107.99
Proform's Street/Strip HEI distributors have a variety of improvements over stock HEI distributors, such as a 50,000 V coil, a premium hi-dielectric cap with brass terminals, both upper and lower bushings for added durability, a low-saturation ignition module, and no voltage-reducing ballast resistors. These units offer calibrated advance curves that are optimized for maximum combustion efficiency, and the elimination of detonation damage and throttle ping. The distributors offer longer-term durability and a higher voltage spark that permits a bigger spark plug gap, resulting in more power and reduced plug fouling. The Ford models' internal coil and module make it possible for Blue Oval owners to avoid the unsightly wiring of stock Ford electronic ignitions. By eliminating the stock Ford or AMC ballast resistor, you'll get more ignition voltage, resulting in an improved spark. Another advantage to switching to HEI is access to easily-found HEI replacement parts. The Ford units are also assembled with upper and lower bushings, an upgrade from stock distributors that only have a single bushing. They're easy to install by connecting one 12 V hot wire to the distributor, making them a quick performance upgrade.
( 165 )
$243.99
Do you need a GM single wire alternator, but are on kind of a tight budget? Allstar Performance can easily hook you up with one of these completely remanufactured GM Delco single wire alternators. You have a choice of 63 or 80 amp capacity alternators to suit your specific application needs. The housings are made of natural finish aluminum with a gold zinc flashed fan and pulley.
( 12 )
$114.99
On Sale
MSD 8.5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per foot—but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft. of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference "choke." This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD's 8.5mm Super Conductor wire sets are available in custom or universal-fit applications, assembled or not, with a variety of terminal and boot end options.
( 1958 )
$184.95
—
$199.95
Clearance
U.S. Wheel 51 Series paint-ready Smoothie wheels are available in a variety of diameters, widths, bolt patterns, backspacing, offsets, center bores, and load ratings. They feature smooth, seamless 2-piece steel construction in silver or bare finish which you can paint or powdercoat to accent or match your ride.
( 20 )
$124.99
—
$126.99
American Racing Torq-Thrust D wheels are classics. These are the wheels that most people think about when you say "American Racing wheels." They feature their popular 5-spoke design and one-piece alloy construction. The center section has a gray finish and is circled with a satin finish outer rim.
( 290 )
$177.00
MSD puts their years of experience to work in making these top-notch iron camshaft mounted distributor gears. Their high-grade ductile iron is micro-polished for a smooth and scuff-free finish, and then Melonite QPC coated to reduce friction and initial wear. Excessive clearance causes timing fluctuation throughout the rpm range, resulting in lost horsepower, so MSD also designed these iron camshaft mounted distributor gears for tighter mesh to the distributor gear.
( 19 )
$126.95
Cardone engineers have meticulously designed and tested their new power steering pumps to fit and perform like the original. Building on decades of experience, each unit is supplied with premium high-temperature seals and reservoirs for easy installation and reliability you can count on. Build it better; order the Cardone new power steering pump designed to fit your application. Features and benefits: * 100 percent computer load testing ensures optimal performance and durability by incorporating real-world parameters during the test cycle * Precise bushing alignment prevents premature shaft and seal wear, significantly reducing noise and vibration * Units are supplied with reservoir and cap (when applicable) to reduce installation time and prevent contamination from trapped debris
( 118 )
$110.99
—
$172.99
On Sale
Lakewood combined their experience and the latest technology in drag racing to develop shocks and struts that are superior to all other drag shocks and struts available. They provide the correct weight transfer on the initial launch and then bring the front-end down quickly for aerodynamic purposes. This transfer will result in lower ETs and keep the rear-end loaded for maximum traction.
( 115 )
$105.95
On Sale
ACCEL Super Coils are engineered for a faster rise time and a longer spark duration. They produce higher spark energy for increased performance. These coils are available for a wide variety of specific engine applications. Order the set designed for your make and model.
( 802 )
$114.95
U.S. Wheel's 26 Series Chrome Blades are durable steel wheels based on the blade design. They have a twisted, 5-spoke center and a high-luster chrome finish. They're available in many sizes and bolt patterns; a center cap is sold separately.
( 56 )
$174.99
PRW Sportsman steel roller tip rocker arms are an ideal choice for a significant cross-section of engines. Anything from a mild street rebuild to the performance demands of off-track, Circle Track, and drag racing. These 4340 chromoly steel rocker bodies feature a longer pivot slot for higher lift camshafts. They're much stronger than stamped steel, so rocker arm flex is negligible. The roller tip minimizes scrubbing from the valve stem pushing forcefully against the valve guide. This reduces friction and frees up an additional 15 to 30 hp over stock models. PRW Sportsman steel roller tip rocker arms are an excellent performance alternative to stock rockers. Order the set recommended for your specific vehicle and engine size. Features, items, and specs: * Wide assortment of ratios to suit almost any cam profile * PRW RockerLocs * Rated at 350 lbs. open spring pressure * Heat-treated pivot balls
( 33 )
$150.64
—
$204.78
CNC-machined to create a perfect fitting hub, VSW 6-bolt steering wheel hub adapters are made from billet aluminum. They can be used with all VSW S6 Series steering wheels (and most universal 6-bolt steering wheels), horn caps, and emblems. Select models are available for Ididit and Flaming River steering columns. Some VSW 6-bolt steering wheel hub adaptors are also offered with tilt and telescopic capabilities. Order the style and finish recommended for your application.
( 23 )
$109.99
—
$112.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
