Availability
Showing In Stock Items. Show All 400 Items.
PerTronix Ignitor® solid-state ignition systems deliver more energy with greater timing accuracy. The secret lies in the trigger magnets, which spin with the rotor and operate a switching module that requires no external control box. These systems are immune to heat, oil, and debris—and install in about 15 minutes with only two wires to connect. They come with a switching module, hardware, and instructions. Ignitor® is an ideal choice for collector car restoration because it fits entirely under the distributor cap.
( 1002 )
$120.99
—
$145.85
On Sale
MSD 8.5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per foot—but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft. of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference "choke." This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD's 8.5mm Super Conductor wire sets are available in custom or universal-fit applications, assembled or not, with a variety of terminal and boot end options.
( 1981 )
$140.95
—
$172.95
$126.85
—
$155.65
A Tuff Stuff Performance high-amp output factory cast-plus alternator is just what every ride needs. These units produce the most power at idle to keep your battery fully charged at all times. Tuff Stuff products are hand-built with the best bearings, diodes, and copper windings available; and the cast-plus finish is applied in the company's Cleveland, Ohio factories. This leaves a natural cast look but offers extreme durability from pitting. The alternators are available in a variety of amperages, case and pulley styles for fitment on thousands of specific vehicle applications.
( 731 )
$113.99
—
$163.99
Whether you're looking to add amperage to your electrical system, or style to your engine compartment, we've got a Summit Racing™ alternator to help you accomplish your mission. Depend on Summit Racing™ to get the power you need and the space you crave.
( 919 )
$136.99
—
$189.99
Get more power from a high-energy ignition than you ever expected with a brand new Summit Racing™ blueprinted HEI distributor. They feature a 50,000 V coil, medium weight advance springs, and an aluminum housing. The distributor shafts are guided by precisely aligned bushings for durability in extended street use, and most models include an adjustable vacuum advance. Separate advance springs are available, so you can fine-tune to your hearts content. Be in it to win it—with the Summit Racing™ blueprinted HEI distributor designed to fit your application.
( 1241 )
$247.99
Ever find yourself wishing someone made a Smoothie-style wheel in midnight black so you didn't have to paint it yourself? Wish granted! U.S. Wheel 510 Series Smoothie midnight black wheels feature all steel construction and a midnight black powdercoated finish. Grab some baby moons or other center hubcaps to pair with these for a knockout nostalgic look. U.S. Wheel 510 Series Smoothie midnight black wheels are available in a variety of sizes and bolt patterns. Order the style recommended for your vehicle.
( 21 )
$124.99
—
$132.99
With their gear-reduction drives, heavy-duty PowerMaster Mastertorque starters really crank out the power--180 lb.-ft. of torque. So they can handle engines with compression ratios as high as 14.0:1. If your stock starter clears your oil pan, they will, too. Some will also clear kicked-out pans. A selection of Mastertorque starters can be mounted in multiple orientations, and some will work inverted with the solenoid down. They feature a black wrinkle finish and select models are available in a chrome plated finish.
( 622 )
$194.99
—
$199.99
Not ones to leave well enough alone, the engineers at PerTronix set out to improve upon their highly successful Ignitor® ignition conversion systems. The Ignitor II® conversion systems have all of the same quality features as the original Ignitor®, plus a powerful microprocessor controller to deliver, on average, 4x more available energy between 3,000 and 5,000 rpm than standard ignition systems. They're an ideal choice for collector car restoration because they fit entirely under the distributor cap. Order the model recommended for your year/make, distributor and engine application. Features include: * Compatible with 12 V negative ground systems and any induction coil * High-rpm performance is improved when used with the PerTronix Flame-Thrower II super low- resistance (0.6 ohms) 45,000 V coil * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops, on average, 2x more available plug voltage * Peak current level is reached just prior to spark for maximum energy without heat build-up, increasing coil and module life * Never change points again * Adjusts spark timing at higher rpm to compensate for the inherent electronic delay * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * Cannot be used with solid core spark plug wires; suppression-style or spiral-wound spark plug wires must be used
( 295 )
$183.50
—
$200.82
Powermaster's highly efficient XS Torque starters feature extra-powerful motors that churn out up to 200 lbs.-ft. of torque. Coupled with their 4.4:1 gear-reduction ratio, that equals reliable cranking power for engines, up to a whopping 18.0:1 compression ratio. These starters come with a billet adapter/mounting block for durability. They'll also clear your oil pan if the OE starter did. Some models are available in a chrome plated finish. Starter dyno test results are included. Order the replacement designed for your vehicle application.
( 908 )
$224.99
—
$225.99
Rust, rocks, and road debris all take part in destroying differential covers—so Spicer Drivetrain Products introduces a line of axle-specific replacements. These kits include a new cover, plug, and installation bolts for an all-new look. They're available in a variety of materials and finishes for high strength and good looks. The differential covers are offered for the front or rear with select options for your particular application.
( 99 )
$142.99
With their gear-reduction drives, heavy-duty Powermaster PowerMax starters really crank out the power--180 lb.-ft. of torque. So, they can handle engines with moderate compression ratios. If your stock starter clears your oil pan, the Powermaster PowerMax starters will, too. Some will also clear kicked-out pans. Powermaster PowerMax starters can be mounted in multiple orientations to fit your needs. Starter dyno reports are included.
( 1152 )
$173.99
—
$190.99
American Racing Torq-Thrust D wheels are classics. These are the wheels that most people think about when you say "American Racing wheels." They feature their popular 5-spoke design and one-piece alloy construction. The center section has a gray finish and is circled with a satin finish outer rim.
( 291 )
$192.00
—
$223.00
Powermaster street alternators feature all of the quality construction and dependability the company is famous for. The "electrical generators" are available in a variety of amperages and styles, allowing you to choose the best model for your specific ride and the accessories you run. So whether you need an alternator for your truck, hot rod, musclecar, sport compact, or audio competition vehicle, Powermaster gives you the power you need to get it started and keep it going.
( 1803 )
$150.99
—
$247.99
Have you ever wondered where you were going to put your oil filter? Doesn't it always seem to be in the way of other accessories? Not anymore with these handy Ford Performance Parts oil filter adapters. They simply screw into the block and rotate the filter toward the front of the engine to provide clearance for engine swaps and chassis modifications. The adapters are available in different models for use with over a thousand applications.
( 21 )
$154.99
Fel-Pro engine gasket kits include the seals needed for a complete rebuild, all in one convenient and affordable package. Each kit features the premium-quality gaskets required for your specific engine—from head, intake, and exhaust gaskets … to valve cover, fuel and water pump gaskets, and many more. These sets are available for thousands of vehicle applications. Match your year/make/model to the Fel-Pro engine gasket kit designed for precise fitment.
( 551 )
$119.99
—
$120.99
Lokar Hi-Tech kickdown kits are made with an extruded liner for extended life--and are available in either stainless steel braided housing, black stainless steel braided housing, or black housing. They feature matching aluminum fittings and ferrules to help eliminate frayed ends and are adaptable to all types of manifolds, including tunnel ram, blower manifolds, and multiple-carburetor systems. Order the Lokar Hi-Tech kickdown kit designed for your transmission application.
( 465 )
$126.40
—
$129.95
Edelbrock Performer RPM street fuel pumps are designed for use with all Edelbrock carburetors used in Performer or Performer RPM applications. These high performance street fuel pumps feature a high-quality, 3-stage polished finish. The unique valve design improves flow quantity and quality—and will support engines with up to 600 hp. The high-volume, 3/8 in. NPT inlet and outlets surpass the capacity of many other pumps. Performer RPM street fuel pumps produce 6 psi and do not require a regulator; and the clockable lower housing can be rotated for the best inlet and outlet alignment. They're designed for use with gasoline only.
( 430 )
$190.95
—
$227.95
Edelbrock Elite II Series valve covers are the next generation of the original Elite Series valve covers. The Elite II Series feature a design that is influenced by the Elite Series originally released in 1985, but with a new modern take on this classic look. The valve covers are made from heavy-gauge, die-cast aluminum and are finished off with a show quality high luster polished finish. The raised fins are accented by a contrast gloss black finish between the fins for the definitive Elite Series look. Depending on application, Elite II valve covers are available in both stock and tall styles. Tall profile valve covers are 2 in. taller than stock and clear most roller rockers and valve train components, while the stock profile versions clear accessories like air-conditioning and alternator brackets.
( 182 )
$238.95
Gabriel HiJackers air shocks are the original air-adjustable shocks designed to provide customizable performance and support. They can be adjusted and readjusted to maintain proper ride height—and handle any of your temporary towing or hauling needs, including boats and campers. Hijackers feature chrome plated piston rod construction and deluxe wiper seals that provide optimum sealing. Dozens of models are available, covering thousands of applications.
( 612 )
$151.99
Add the race look to your vehicle without the high price. Our high-quality, cast-aluminum one-piece Summit Racing Equipment® Fast-Five wheels include a center cap, 5-spoke star-style design, and are available in multiple bolt patterns to suit your performance needs.
( 52 )
$152.99
—
$176.99
Replace the alternator in your early GM, Ford, or Chrysler, while retaining its original look, with a Powermaster retro alternator. All of the alternators conform to the proper size and appearance of yesterday—while incorporating the technology of today. Plus, they all utilize OEM finishes and wiring hookups for a trouble-free installation. Retro alternators are available in a variety of case and pulley styles, amperage outputs, and wiring capabilities. Order the model designed for use on your vehicle.
( 346 )
$134.99
These Chrome Smoothie wheels will turn heads at the cruise-in and on the road with their classic good looks. Their smooth, nostalgic style is a perfect choice for your hot rod.
( 212 )
$190.14
—
$209.13
Proform alternators are available for countless vehicles, from the 1950s thru the 1990s. These replacements come assembled and ready to bolt on. They're available in a variety of styles, finishes, amperage outputs, and other options. Select the model recommended for your application.
( 290 )
$142.99
Tuff Stuff Performance Supercool water pumps create 30 percent more flow to help cool engines under abnormal conditions. Ideal for race applications, these pumps are made from high-quality materials, such as aluminum and iron, and are available in a variety of finishes. Options include short and long style; standard and high-volume flow; clockwise and counterclockwise rotation; and different pilot diameters. Whether you're replacing or upgrading, there's a Supercool water pump for your specific vehicle.
( 422 )
$115.99
—
$234.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
