Availability
Showing In Stock Items. Show All 11 Items.
On Sale
Holley steering U-joints are ideal for building custom steering shafts and are available in a wide range of popular sizes for most applications. These components have a steel construction with retaining screws on the bearing caps for strength and durability. These components are manufactured for extreme durability—which makes them ideal for muscle cars, street rods, and custom applications. The black zinc finish looks great and provides corrosion protection. Order the model designed for your application needs.
( 4 )
$59.45
$32.70
On Sale
Holley steering shafts are easy to assemble and cut to length where needed. They feature mild steel construction with a black E-coat finish to resist corrosion. Choose the version to best fit your application.
( 10 )
$49.95
$32.47
On Sale
Summit Racing™ truck shocks are designed specifically to give your truck a factory-quality ride, both on and off-road. The twin-tube, hydraulic-action shocks feature multi-stage valving and are available for front or rear positions. They're offered in a variety of extended and collapsed lengths for stock-height and lifted applications. All truck shocks come standard with red polyurethane bushings and boots.
( 121 )
$36.99
$33.29
On Sale
RSO Suspension brake line relocation brackets are an integral part of raising your vehicle while allowing you to retain factory brake lines. These brackets reposition the brake lines, alleviating the stretch and strain that can occur when a suspension lift is installed. The brackets have factory-like locating tab which locks in the same position on the vehicle frame, as well as the existing brake line. These kits are designed to work with most lifts up to 4.5 in. and include steel brackets and required hardware for installation.
Not Yet Reviewed
$53.99
$48.59
On Sale
Steeda's IRS subframe bracket kits provide an immediate improvement in handling and eliminate the flexing of the IRS subframe mounting bracket. The rear suspension subframe of the 1999-2004 Cobra attaches to the car via a cantilevered bracket. The outer half of this bracket is completely unsupported and flexes significantly, leading to less predictable handling as the entire rear suspension system shifts under the car. Steeda's support kits reinforce the bracket and eliminate flexing. Overall handling and responsiveness are improved and wheel hop is reduced.
Not Yet Reviewed
$34.95
$31.46
On Sale
Body Armor 4x4 suspension leveling kits are the ideal way to quickly enhance the look of your vehicle. They're economical kits that create the perfect look by adding additional clearance to fit up to 35 in. tires and wider wheels for both 2WD and 4WD vehicles. Each leveling kit is engineered to retain a factory ride and is backed by Body Armor's Armor Guard warranty.
Not Yet Reviewed
$40.00
$34.00
On Sale
Get your traction system back with Lakewood replacement traction bar U-bolt kits. They include a pair of new U-bolts with the correct washers and nuts to install on your Lakewood traction bars.
( 5 )
$52.99
$29.14
On Sale
Summit Racing™ tie rod sleeves are designed to fit over skinny factory-style inner tie rod ends known to bend when going off-road. They're built from carbon steel and replace the jam nut and thread over the factory inner tie rods to provide additional strength to keep you on the trails. You'll need to re-adjust your wheel alignment after installation. Hit the trails and dirt roads with confidence knowing your steering linkage is reinforced with Summit Racing™ tie rod sleeves. Order the pair recommended for your vehicle. Additional notes: * Carbon steel construction; black oxide finish * Bolt-on installation * Increases steering link diameter * Works with OEM tie rods
Not Yet Reviewed
$51.99
$44.95
On Sale
ADS limit straps protect your suspension from drooping out too far and damaging your components. Available in 2 in. increments from 8 to 30 in., they feature 4130 heat-treated chromoly end pieces and are made with mil-spec, resin-treated 7,000 lb. nylon webbing and quad wrapped for durability. A rugged ADS rubber patch (not on 8 in. strap due to length) adds durability and style. Select the length you need. Additional features: * Quad wrapped for durability using 1.75 in. mil-spec, resin-coated, twisted yarn nylon webbing * Heat-treated 4130 chromoly black hardware with 9/16 in. eyelets * Straps are measured from the center of each eyelet
Not Yet Reviewed
$35.41
$26.56
On Sale
Maximize suspension performance in your ride with REKUDO rear sway bar end links! These rear sway bar end links are designed for vehicles that didn't come from the factory with a rear anti-sway bar. They can also be used as a service replacement parts for the Tesla Model 3 (all models with a rear sway bar). These kits include the end links for both sides of the vehicle to add a rear sway bar. The end links have a black E-coat finish to protect them from corrosion. REKUDO offers a wide range of suspension parts that will plant your vehicle through the turns and maintain a comfortable ride on the street.
Not Yet Reviewed
$65.75
$36.16
On Sale
Steeda has once again taken their products to the next level with these rear sway bar relocation brackets. These brackets are designed to move the rear bar more towards the centerline of the wheel, which will allow drag racers to run 15 in. wheels. Unlike the competition, which provides a button-head square neck bolt that doesn't allow your sway bar bushing to sit flat and can cause binding issues, these brackets come with a countersunk hole and bolt for zero interference and a completed design.
( 1 )
$49.95
$44.96
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
