Availability
Showing In Stock Items. Show All 51 Items.
Odyssey Performance Series batteries are designed to handle the increased use of on board accessories in today's vehicles. They combine long service life, high reliability, and deep cycle capabilities. Performance batteries provide all the reliability of the Odyssey Extreme Series batteries, without the high cold cranking amps or reserve capacity many people may not require. The Performance Series batteries contain flat plates made of 99.99 percent pure lead--not lead alloy, like many conventional batteries.
( 63 )
$363.99
On Sale
MSD Pro-Billet distributors share the same CNC machining techniques as the rest of the MSD distributor line. They feature a housing that's machined from high-quality 6061-T6 aluminum for durability and show-quality looks. Their oversized shaft receives a QPQ coating for friction reduction and corrosion resistance, with the added strength of two sealed ball bearings that guide the shaft accurately at well over 10,000 rpm. An extra-long sintered bushing replaces the ball bearing at the bottom of Chevrolet models. TIG-welded on top of the polished steel shaft is MSD's accurate mechanical advance assembly. The weights are supported by nylon pads that allow the advance to operate smoothly throughout the rpm range. For all-out racing, the advance mechanism can also be easily locked out. To accurately trigger the ignition, a high-output magnetic pickup is bolted to the base. This pickup produces a precise trigger signal that will never vary more than one degree at any rpm. A durable gear is installed for performance applications, and an MSD red cap with brass terminals and race rotor is supplied. They're available in standard and small diameter models for applications with limited clearance, and require the use of a separate ignition box such as an MSD 6, 7, 8, or 10 Series ignition.
( 405 )
$483.95
Powermaster's highly efficient XS Torque starters feature extra-powerful motors that churn out up to 200 lbs.-ft. of torque. Coupled with their 4.4:1 gear-reduction ratio, that equals reliable cranking power for engines, up to a whopping 18.0:1 compression ratio. These starters come with a billet adapter/mounting block for durability. They'll also clear your oil pan if the OE starter did. Some models are available in a chrome plated finish. Starter dyno test results are included. Order the replacement designed for your vehicle application.
( 908 )
$258.99
—
$293.99
Procar Series 1614 seats are perfect to reinforce a traditional, classic look for your interior. They feature stylish vertical stitching, sleek lines, and side bolsters for maximum support and comfort. The adjustable bucket seats incline and recline via lever control. Each seat is built with TIG-welded steel tubing, injection-molded foam, and suspension straps for support and comfort; and sliders are included. Procar Series 1614 seats are available for the driver or passenger side, in a choice of material and colors.
( 3 )
$305.99
Pertronix Flame-Thrower stock look cast distributors are loaded with all of the features that you would expect from a high performance part, and yet they maintain the original look, for the ultimate "sleeper." Pertronix builds each distributor with all-new components, not from remanufactured parts like some companies do. No longer will you need to hassle with adjusting points or replacing capacitors, because these distributors are equipped with maintenance-free Ignitor electronics, providing decades of trouble-free operation. Each distributor is complete with a high-quality cap and rotor, so you're ready to run right out of the box. Stock look distributor features include: * All-new lightweight cast aluminum housing, modeled after the original Delco and Motorcraft distributors * Hardened gear ground to exact tolerances for precise mesh with cam * Adjustable vacuum advance canister, providing extra tunability * Optimized phasing to ensure maximum energy to the spark plug * Tailored advance curve for optimal performance and drivability * Integrated electronic ignition--available with solid-state Ignitor or the powerful Ignitor III with built-in adjustable REV limiter and multi-spark through redline * High dielectric strength cap and rotor with brass contacts
( 255 )
$255.65
—
$318.80
Rhodes Race Cars competition roll cages meet or exceed NHRA and IHRA requirements (when properly installed). Available in 4, 6, 8, and 10-point models, all RRC bars are precision bent for each particular body style and feature notched tube ends (where applicable) for ease of installation. Increase chassis stiffness, and race safe with Rhodes Race Cars competition roll cages. RRC roll bars and cages are available in the following materials: * 1-3/4 in. x .134 in. wall mild steel tubing * 1-3/4 in. x .120 in. wall DOM tubing * 1-3/4 in. x .083 in. wall 4130 chromoly tubing The 4-point kits include main hoop, rear braces, seat crossmember, and four steel mounting plates. The 6-point kits include main hoop, rear braces, side bars, seat crossmember, and six steel mounting plates. The 8-point kits include main hoop, rear braces, side bars, frame supports, seat crossmember and 6 steel mounting plates. The 10-point kits include everything in the 8-point kits, plus a roof hoop, windshield runners, and dash crossmember. Note: Because of differing driver positions and main hoop locations, roof hoop and windshield down bars are not notched!
( 143 )
$334.95
—
$499.95
Compu-Fire replacement alternators feature quality construction and are a dependable solution to your charging problems. Available in a variety of amperages and styles, they allow you to choose the right one for your ride and the accessories you run. Compu-Fire alternators have the power you need to keep you going.
Not Yet Reviewed
$256.75
—
$413.25
Compu-Fire DIS-IX distributorless ignition systems for your Bosch 009 distributor provide triple the energy of traditional electronic ignition systems. You'll realize the benefits of the maintenance-free, instant starting setup in these bolt-on, plug-and-play systems. The distribution and the switching functions have been eliminated, but you still have need for the timing function, and the body of a Bosch 009 contains a robust centrifugal-advance mechanism that fulfills that role in a practical, inexpensive, and reliable manner. DIS-IX systems include: * Custom high-energy 60,000 V coil pack * Silicone spark plug wires * All electronics, wiring, and connectors * Mounting hardware.
( 4 )
$368.15
PerTronix Flame-Thrower plug and play billet distributors with Ignitor II® module are designed to provide maximum ignition performance and easy installation, all at a price that you can afford. They allow you to upgrade your outdated points or stock electronic distributor with a performance-proven unit. The distributors feature the patented Ignitor II® electronic ignition module and a CNC-machined 6061 T-6 polished billet housing. PerTronix electronics are compatible with any inductive ignition system coil, but high-rpm performance can be improved when they are used with the low-resistance (0.6 ohm) Flame-Thrower II coil. Their stand-alone design makes them plug-in units that require no additional ignition, but they are compatible with multi-spark CD ignition boxes for outstanding versatility. Additional features include a tempered shaft, an upper roller bearing, and an oil-impregnated sintered bronze lower bushing. The PerTronix Flame-Thrower plug and play billet distributors with Ignitor II® module come with a factory-set performance curve, a mechanical advance limiting adjustment, and a small, high-dielectric strength cap and rotor for applications with little clearance.
( 359 )
$387.25
—
$388.85
PerTronix Flame-Thrower plug and play billet distributors with Ignitor III® module offer the latest version of Pertronix's ignition modules. They include the patented Ignitor III® electronic ignition module and a CNC-machined 6061 T-6 polished billet housing. The Ignitor III® features adaptive dwell, which maintains peak energy throughout the entire rpm range, reduces misfires and improves engine performance. Peak current level is reached just prior to spark for maximum energy without the heat buildup and increased coil performance and module reliability. They adjust spark timing at higher rpm to compensate for the inherent electronic delay and increase energy for quicker, easier starting by sensing startup. The PerTronix Flame-Thrower plug and play billet distributors with Ignitor III® module have an integrated digital rev limiter with LED feedback for precise RPM setting and a memory safe function that stores settings eliminating unintended changes to the rev limit.
( 139 )
$433.40
Whatever you drive, Compu-Fire starters will get your engine running. Available raw or polished, they produce 2 kW of starting energy, and their lower gear reduction ratio allows for easier starts. Get your air-cooled vehicle "fired-up" with the help of Compu-Fire starters.
Not Yet Reviewed
$324.10
—
$383.00
PerTronix alternators are designed for Volkswagens to allow the use of high-output sound systems, engine management systems, and off-road lighting, plus they are direct bolt-on replacements for air cooled Volkswagens. They are internally regulated for excellent output at idle and their internal fan helps to maximize cooling for improved component durability when used in extreme operating conditions. The alternators are available in natural or a show-quality polished finish. Order your application in your preference of finish.
( 2 )
$402.60
Rhodes Race Cars roll cage conversion kits are designed to convert your existing roll bar into a 10, 12 or even 14-point roll cage. RRC conversion kits meet or exceed the NHRA and IHRA requirement for roll cage tubing. These kits include roof tubes, windshield post runners, and dash crossmember. Conversion kits may be available in any of the following materials: * 1-5/8 in. x .134 in. wall mild steel tubing * 1-5/8 in. x .120 in. wall DOM tubing * 1-5/8 in. x .083 in. wall 4130 chromoly tubing Note, because of differing driver sizes and main hoop locations, these kits are not notched!
( 6 )
$294.95
—
$414.95
Create a solid, luxury car feel and take the guesswork out of sound deadening with Dynamat Xtreme Custom Cut kits! They isolate vibrations, reduce heat, and stop noise for a cool, quiet, and comfortable ride. Custom Cut kits are made specifically for your application, precut to the exact sizes that you'll need for your vehicle's interior sheet metal or fiberglass. Dynamat Xtreme with Vector Chemistry is a patented sound deadener with a .060 in. layer of butyl and a .004 in. aluminum face. They provide the highest efficiency of sound deadening properties available. You'll experience better sound and bass from your music and eliminate annoying road noises. Simply peel and stick these self-adhesive Dynamat Xtreme kits to your interior surfaces for amazing results. Use them on doors, floors, hoods, trunks, and roofs for the ultimate in driving comfort! Dynamat Xtreme Custom Cut kits are offered for a variety of applications in a choice of coverage areas.
( 72 )
$292.95
If you want your classic VW to steer like new, the EMPI steering boxes are your solution. These steering boxes are built to replicate a precise fit and function of the original equipment (OE) part for your make and model, making them a reliable choice for a smooth and reliable steering experience. Manufactured in an ISO 9001 certified facility with all-new components, the EMPI steering boxes are tested to ensure performance and longevity. Each steering box unit comes pre-filled with the correct amount and grade of grease, which is a big-time saver that eliminates a step in the installation.
Not Yet Reviewed
$443.05
EMPI's IRS super differentials provide the needed strength to withstand the abuse of high horsepower engines. The stronger construction prevents the stock housing from flexing, a common problem with powerful engines. The IRS super differential carriers feature an extra pair of spider gears, which helps distribute power and increases overall durability. The units design allows for infinitely adjustable ring gear lash, giving you more control over performance. Furthermore, their installation does not affect the operation of steering or turning brakes, so your vehicle's handling remains consistent.
Not Yet Reviewed
$297.40
The EMPI swing axle super differentials offer significantly increased strength for high-performance and racing applications, primarily by using four spider gears instead of the stock two to distribute power more effectively. Key benefits include enhanced durability under high horsepower, a stronger differential housing, and precision machining, which eliminates stock housing flex and can withstand high-stress events. The units are made from a high-quality, non-porous steel alloy casting and precision CNC machined for a perfect fit and superior performance. The differential is supplied bare. This allows the builder to choose the spider gears that best fit their needs.
Not Yet Reviewed
$310.25
EMPI recreated these roof racks—a popular VW accessory from the 50's and 60's—to hold luggage, a cooler or camping gear securely, while looking "Old School" cool. By moving cargo to the roof, you create more room inside the car for passengers and essentials, leading to a more comfortable trip. Properly loading a roof rack also helps distribute weight more evenly, which can improve your vehicle's handling and stability. Made from tubular steel and jig welded, the roof racks come finished in a silver powdercoat and feature wood slats—just like the originals! Some racks, such as the Type 2 wood slat versions, feature a "knock-down" design for an easier assembly.
Not Yet Reviewed
$375.75
TMI standard seat upholstery replaces your old, worn, and ugly seat covering with renewed style. Give your seats back their original appeal with the correct OE colors and designs. Their precision and pride stitch together heavyweight vinyl with a longer-lasting polyester backing and they use authentic extruded welt--not wrapped cord--for better looking and longer-lasting seats. Just as TMI is proud of their work and investment in the quality of their seats, you will be just as proud seeing the finished results in your vehicle. TMI Products standard seat upholstery offers you the value of longer-wearing, well-made products for your restoration.
( 3 )
$425.32
EMPI offers many sizes and styles of exhaust systems to fit your VW. Buggy, Baja, Competition, GT, and side exit styles made from steel or stainless steel with black or natural finishes is just a few of the options available. EMPI exhausts feature mandrel bends, TIG welding, strong flanges, and many are fitted with an EMPI badge for a custom look. Most will include tips and hardware. Look over their selection and choose the best fit for your vehicle's application.
Not Yet Reviewed
$389.40
SafeTBoy 3-point retractable push button buckle lap belts offer safety every time your buckle up. These modern over-the-shoulder belts feature heavy-duty OEM-style fabric in a large selection of colors fitted with an easy-to-operate, push button-style buckle. SafeTBoy retractable buckle belts are CAD-designed and engineered to fit comfortably across your waist, and then smoothly return to their place when unbuckled. SafeTBoy belts are FMV-approved, and provide the security and protection you need in your vehicle.
( 79 )
$259.50
—
$399.50
South Bend Clutch Stage 2 Drag Race clutch kits are designed with racers in mind. They include a single mass SFI-approved flywheel with each kit—typically required for drag racing when the original design is dual mass. The heavy-duty pressure plate is modified for a puck-style disc with no cushion between the linings to keep the clutch pedal travel short and quick. These South Bend Clutch Stage 2 Drag Race clutch kits are recommended for drag racing, drifting, and limited street use. Order the kit that's recommended for your specific vehicle and engine size. Features, items, and specs include: * Graphite-impregnated ceramic friction material for exceptional durability, heat transfer, torque capacity, and reduced chatter * Puck-style disc reduces rotational mass and total drive surface area, while increasing psi on the surface of the friction material * Disc design minimizes inertia, accelerating the transfer of torque from the engine to the wheels * Meticulous processing and advanced packaging materials
Not Yet Reviewed
$475.82
PerTronix Flame-Thrower plug and play billet distributors with Ignitor I® module are designed to provide maximum ignition performance and easy installation, all at a price that you can afford. They allow you to upgrade your outdated points or stock electronic distributor with a performance-proven unit. The distributors feature the patented Ignitor I® electronic ignition module and a CNC-machined 6061 T-6 polished billet housing. PerTronix electronics are compatible with any inductive ignition system coil, but high-rpm performance can be improved when they are used with the low-resistance (0.6 ohm) Flame-Thrower II coil. Their stand-alone design makes them plug-in units that require no additional ignition, but they are compatible with multi-spark CD ignition boxes for outstanding versatility. Additional features include a tempered shaft, an upper roller bearing and an oil-impregnated sintered bronze lower bushing. The PerTronix Flame-Thrower plug and play billet distributors with Ignitor I® module come with a factory-set performance curve, a mechanical advance limiting adjustment, and a small, high-dielectric strength cap and rotor for applications with little clearance.
( 2 )
$387.25
—
$439.75
Now you can get a quality distributor that delivers excellent performance and doesn't break the bank. Pertronix has taken all of the things that you like about the Bosch 009 distributor and the performance capabilities of the 010 and 060 distributors and designed them into these distributors. To top things off, these distributors feature integrated Ignitor electronics.
( 54 )
$433.40
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
