Availability
Showing In Stock Items. Show All 98 Items.
Get cool with Vintage Air! Their Gen 5 SureFit evaporator kits assist with providing powerful and intelligent climate control for your vehicle. These kits utilize an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments. Additionally, they include variable blower speed and dash/floor/defrost blend. Vintage Air Gen-V SureFit evaporator kits include the evaporator unit and mounting brackets, louvers (where required), duct hose wiring harness, hardware, and installation instructions, along with either a bolt-in replacement control panel or Vintage Air's patented electronic cable converters to use with your factory system controls. Choose the kit designed for your vehicle. Features and benefits: * Engineered to cool your vehicle faster than ever * Improved diagnostics and advanced systematic fail safes * Multiple mounting options for an easier installation * Rubber well-nut mounting points for improved NVH isolation * Separate high-capacity A/C and heater coils with blend air door for rapid vent temperature adjustment * OEM block-type expansion valve * Injection molded case for optimal precision, strength and quality * Injection molded blend air doors with integral rubber seals * Removable access covers for coil service * Interchangeable defrost and floor heat plenums for increased mounting flexibility * Powdercoated steel mounting brackets * Quiet high-performance blower
( 11 )
$1,417.99
GMB high performance water pumps are designed to combat engine overheating associated with higher performance and load applications. They feature a precision-ground, heavy-duty steel bearing that's completely sealed and lubed for life. These replacement pumps have a specially modified, higher performance impeller that eliminates cavitation at all rpm—and maintains maximum volumetric flow of coolant throughout the engine. Order the model recommended for your application. Additional features: * Increase pump pressure up to 300 percent * Eliminate steam pockets trapped inside the engine block * Reduce engine temperature by 15-30 degrees * Help increase horsepower
( 235 )
$71.99
Hayden Rapid-Cool transmission oil coolers take the heat, so your vehicle won't! Over 14-million transmissions fail every year, and 9 out of 10 are from overheating. Rapid-Cool's unique plate and fin design combines cooling expertise and space efficiency; multiple sizes are available. Their patented internal turbulation provides better heat transfer. Lower your operating temps with a pioneer in cooling: Hayden!
( 159 )
$43.99
—
$62.99
On Sale
Summit Racing™ performance fit radiators feature a quality aluminum core and are designed to fit your vehicle. They offer improved heat dissipation over OEM radiators, and some models are available with a built-in automatic transmission cooler. Modifications may be required when installing Summit Racing™ performance fit radiators. Designed for use with electric fans, the OEM fan shroud is not compatible with these radiators in most applications.
( 1072 )
$274.99
—
$399.99
Edelbrock high performance thermostats are designed to ensure consistent cooling in high performance applications. Edelbrock thermostats feature brass and copper valve assemblies with stainless steel bodies for durability. They are bolt-on OE-style replacements and are available to fit many popular domestic and import applications. They are available with160, 180, and 190 degree F ratings.
( 44 )
$22.95
—
$24.95
Cool just got better! Cold-Case performance aluminum radiator modules bundle performance components for the most efficient cooling available. They've packaged their high-quality radiators with their exact fit shrouds and electric fans to deliver the best fit with an original look, an easy install, and effective cooling at an affordable price. Order the universal or application-specific model best suited for fitment in your engine bay. All Cold-Case radiator modules feature: * OEM-stamped, fully polished tanks * Aluminum shroud * Electric fan(s) * Correct OEM fitment * Lightweight, efficient aluminum construction * 100 percent TIG-welded * Internally welded filler necks offer a clean, factory look * Two oversized cooling rows for increased capacity * 1 in. to 1 1/4 in. tubes for higher volume * Works with factory filler cap * Includes OEM-style petcock * 42.7 percent lighter than comparable copper radiators * 30 percent thicker materials than no-name aluminum radiators * 60-day COOL guarantee
( 188 )
$588.54
—
$597.54
Get maximum cooling for the street or track. Edelbrock Victor Series high-volume water pumps are designed for maximum flow and equal coolant distribution in street cars, race cars, tow vehicles, and motor homes. The aluminum pumps have CNC-machined housings with special one-way internal passages that flow more coolant at higher velocities, even at low engine speeds. The CNC-machined impellers are larger than other impellers and have curved vanes that produce greater flow with less cavitation. Other features include heavy-duty roller bearing assemblies built to withstand higher torsional loads, billet steel hubs, leakproof seals, and gaskets. Most Victor Series pumps are available in your choice of satin, black, and polished finishes, or EnduraShine.
( 172 )
$300.95
—
$417.95
Flex-A-Lite belt-driven Flex fans feature an aggressive pitch blade design to move the most air at idle. Plus the Flex blades will flatten out at high engine rpm to reduce drag--improving horsepower and gas mileage. Specs for Flex-A-Lite Flex fans: * Stainless steel (6) blades with red stars * Stainless steel (5 or 6) blades with blue stars * Stainless steel blades with gold star (reverse rotation only) * Several diameters to choose from * Mounting pattern: 5/8 in. pilot, 1 3/4 in. to 2 1/2 in. bolt pattern * Projected width of 2 1/4 in.
( 49 )
$86.99
—
$95.99
Maradyne Jetstreme electric fans feature a low-profile design to allow for turbo or supercharger installations. They use a sealed motor tested in accordance with DIN EN 60529 and are dust and waterproof to IP68. The fans utilize an S-blade design for quieter operation and have a rubber seal that eliminates vibration contact and increases airflow. Maradyne Jetstreme electric fans have all glass-filled nylon construction for maximum durability.
( 17 )
$218.58
—
$463.04
Maradyne Champion series electric fans are great for use on remote transmission coolers, oil coolers, or intercoolers. They feature a reversible motor, so they can be used as a puller or pusher type, depending on your space constraints. They use sealed motors, perfect for harsh conditions, including off-road, and they can be sprayed clean without moisture entering the motor. The Maradyne Champion series electric fans have a glass-filled nylon shroud and blade and are high-temperature and impact-resistance for harsh underhood temperatures and greater resistance to flying road debris.
( 63 )
$120.27
—
$165.11
On Sale
Do you need to replace your stock radiator? Scott Drake's line of radiators will cool your pony's engine down without breaking the bank. Scott Drake manufactures these radiators using quality materials, ensuring a proper fit. All radiators are pressure tested and meet or exceed original equipment specifications.
( 81 )
$465.95
—
$749.95
On Sale
Summit Racing™ classic OEM radiators are designed to give you top performance cooling, while fitting your vehicle's mounts, so your ride can have a new radiator without having to modify brackets and fittings. The radiators are available in various styles and sizes to best fit your application or engine bay design.
( 442 )
$328.99
GMB OE replacement water pumps are precision-built and balanced to meet or exceed original equipment specifications. They're assembled with heavy-duty steel bearings—and are lubricated and sealed for life. Order the model designed for your vehicle application. All GMB water pumps are factory-tested for quality and include the following features: * High-flow design for long-lasting, efficient cooling * Designed for OE fit and performance * Precision-ground shaft and hub accept OE fan clutches perfectly * OE-quality forged housing is specially formed to ensure maximum coolant flow * Pressed-on impeller increases water flow * Unique no-sealant-required gasket makes installation fast and easy * Unitized seal protects bearings for long life and leak-free performance * Factory-sealed, precision-ground, one-piece bearing assembly
( 513 )
$63.99
—
$72.99
Tuff Stuff Performance Platinum Series water pumps are constructed from lightweight aluminum, and are available in both standard- and high-volume flow rates. Choose from among long and short styles, clockwise and counterclockwise rotations, and several quality finishes. These mechanical water pumps are ideal for replacement or upgrade purposes. They're available for a wide variety of vehicle-specific applications.
( 66 )
$184.99
Replace your stock thermostat housing with new parts from Dorman. These quality replacement components offer solution upgrades for your coolant system, and they are available for several applications. Don't wait for your engine to overheat or for the check engine light to illuminate--upgrade to reliable, OE-fitting thermostat housings from Dorman.
( 175 )
$13.99
—
$20.99
Four Seasons fan mount pull tie kits allow for the easy installation of your fan. These black nylon ties secure your fan and include holders and pads to protect your radiator. Mount your fan right with Four Seasons fan mount pull tie kits.
( 51 )
$2.99
Tuff Stuff Performance Supercool water pumps create 30 percent more flow to help cool engines under abnormal conditions. Ideal for race applications, these pumps are made from high-quality materials, such as aluminum and iron, and are available in a variety of finishes. Options include short and long style; standard and high-volume flow; clockwise and counterclockwise rotation; and different pilot diameters. Whether you're replacing or upgrading, there's a Supercool water pump for your specific vehicle.
( 410 )
$101.99
—
$290.99
Cold-Case performance aluminum radiators are available and affordable for all. These high-quality, tube-and-fin performance radiators are true OE styles for most applications. Each Cold-Case design distributes fluid more evenly, eliminating hot and cold spots. Also, the massive cores take up the entire width of their tanks, so you get the most efficient cooling possible. The radiators drop-in without modifications needed (on most) and look original. Plus, Cold-Case stands behind its quality and research with a limited lifetime warranty on their products. All Cold-Case radiators feature: * Lightweight, efficient aluminum construction * 100 percent TIG-welded * Internally welded filler necks offer a clean, factory look * Two oversized cooling rows for increased capacity * 1 in. to 1 1/4 in. tubes for higher volume * Works with factory filler cap * Includes OEM-style petcock * 42.7 percent lighter than comparable copper radiators * 30 percent thicker materials than no-name aluminum radiators * 60-day COOL guarantee
( 624 )
$385.54
—
$395.54
PRW High Performance mechanical water pumps are engineered to deliver increased water flow faster. These super velocity pumps significantly improve cooling for all street, high performance, and racing applications. The low pressure-injected, A356 aluminum alloy pump bodies are complemented by a precision, high-flow cast iron impeller design. Pressure-balanced water passages equalize flow and minimize engine hot spots at any speed. PRW High Performance mechanical water pumps are excellent alternatives for not only racers, but also trucks, towing, and motorhome applications. Order the model recommended for your specific vehicle and engine size. Features, items, and specs: * 35 gpm at 4,000 rpm with minimal cavitation and proportional increased flow rates at 5,000+ rpm * Aircraft industry tolerances * Heavy-duty 0.75 in. diameter steel shafts * Billet steel hubs and shielded-seal roller ball bearings * Back plate O-ring sealed for most applications * System Basis Chip (SBC) applications include adjustable hardware
( 29 )
$119.87
—
$302.02
On Sale
Protect your ride from overheating! Now you can maximize cooling efficiency with Frostbite's performance cooling aluminum radiators. They're engineered to cool more effectively and weigh less than the older OEM-style brass units, enhancing the overall performance of your engine. Frostbite radiators are available in a variety of application-specific fitments, each unit engineered with aircraft-quality aluminum cores, fittings, tanks with billet aluminum filler necks, and OEM-style brass petcocks. A proper cooling system starts with the right radiator—the Frostbite!
( 311 )
$732.95
$375.15
—
$549.95
Cold Case Night Rider Black Series radiators blend performance with original appearance to give you the best of both worlds. You will be hard pressed to find a difference between an original versus a Cold Case radiator. All Cold Case radiators are 100 percent TIG-welded aluminum to withstand high temperatures and the extreme pressure a performance engine can put on them and feature OEM appearing stamped tanks. Select the Cold Case radiator for your make/model/year vehicle for that perfect restored appearance of stock without sacrificing performance. Key features of Cold Case Night Rider Black Series radiators: * 100 percent TIG-welded * All Aluminum construction with stylish black powdercoat finish * OE style tanks * Corrugated fins give more surface area and more thermal transfer * Pressure tested * Available for automatic and manual transmissions * Works with the factory fan shroud (unless noted otherwise)
( 21 )
$428.54
—
$453.54
Some like chrome, some like powdercoat, some like nothing at all. No matter your preference, We have you covered with a big selection of Summit Racing™ mechanical cast iron water pumps. We have short and long pumps, standard and high-flow models, and a selection of finishes to meet your needs.
( 224 )
$89.99
—
$92.99
Hayden Rapid-Cool transmission oil coolers with thermal bypass are ideal for colder climates. With their patented internal pressure bypass design, they will help your transmission reach optimum operating temperature quickly by routing the fluid through the bypass channel of the cooler until fluid temperature increases. Reaching operating temperatures faster improves fuel economy and reduces friction of internal components. Hayden's design incorporates an integrated valve that eliminates the need for external valves and additional plumbing at installation. Features and benefits: * Bi-directional flow * 33 percent more efficient than traditional coolers * High efficiency louvered fins and special oil turbulators * 100 percent brazed aluminum construction offer superior strength and reliability * Available in sizes to fit a wide range of applications from compact cars to Class "A" motorhomes * All cooler brackets come pre-drilled for easy mounting * All hardware necessary for installation * 100 percent pressure-tested at the factory ensuring quality and performance
( 11 )
$61.99
—
$86.99
On Sale
Need better temperature control? Summit Racing™ Classic OEM heater cores will get your heater and defroster functioning properly once again. Designed to perform and built to last, our heater cores feature either aluminum or copper/brass construction and high-strength alloys to resist corrosion to serve you longer. They also offer an OE fit to make your installation easier. Keep your vehicle cabin warm with Summit Racing™ Classic OEM heater cores.
( 247 )
$72.99
—
$80.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
