Availability
Showing In Stock Items. Show All 81 Items.
Get more power from a high-energy ignition than you ever expected with a brand new Summit Racing™ blueprinted HEI distributor. They feature a 50,000 V coil, medium weight advance springs, and an aluminum housing. The distributor shafts are guided by precisely aligned bushings for durability in extended street use, and most models include an adjustable vacuum advance. Separate advance springs are available, so you can fine-tune to your hearts content. Be in it to win it—with the Summit Racing™ blueprinted HEI distributor designed to fit your application.
( 1224 )
$112.99
—
$264.99
Street Fire HEI distributors are the value-line brand from MSD Ignition. They offer a quality designed alternative to the bottom bargain parts that spring up in the marketplace. Knowing the importance of a centrifugal advance in a distributor, MSD engineers made sure the Street Fires include an advance assembly with coated weights and welded weight pins. The units are also fit with the same distributor gear that's used on the MSD Pro-Billet models. The metallurgy of this gear has been refined for years to perform through the harshest conditions. Inside, the ignition module and coil work together to produce a stout spark to light the fuel mixture for great performance. Order the Street Fire model recommended for your vehicle and engine application.
( 287 )
$217.95
—
$249.95
PerTronix Ignitor® solid-state ignition systems deliver more energy with greater timing accuracy. The secret lies in the trigger magnets, which spin with the rotor and operate a switching module that requires no external control box. These systems are immune to heat, oil, and debris—and install in about 15 minutes with only two wires to connect. They come with a switching module, hardware, and instructions. Ignitor® is an ideal choice for collector car restoration because it fits entirely under the distributor cap.
( 997 )
$108.86
—
$255.65
On Sale
ACCEL Performance replacement distributors are perfect for your daily driver or street machine. They're built with all-new components and high performance ACCEL electronics. Each model's design features the materials and accessories that make for an easy installation while providing the fit, form, and function you need. Order the ACCEL Performance replacement distributor designed for your engine when you need a quality substitute or want better performance.
( 149 )
$125.95
Manufacturer Rebate
Pertronix Flame-Thrower stock look cast distributors are loaded with all of the features that you would expect from a high performance part, and yet they maintain the original look, for the ultimate "sleeper." Pertronix builds each distributor with all-new components, not from remanufactured parts like some companies do. No longer will you need to hassle with adjusting points or replacing capacitors, because these distributors are equipped with maintenance-free Ignitor electronics, providing decades of trouble-free operation. Each distributor is complete with a high-quality cap and rotor, so you're ready to run right out of the box. Stock look distributor features include: * All-new lightweight cast aluminum housing, modeled after the original Delco and Motorcraft distributors * Hardened gear ground to exact tolerances for precise mesh with cam * Adjustable vacuum advance canister, providing extra tunability * Optimized phasing to ensure maximum energy to the spark plug * Tailored advance curve for optimal performance and drivability * Integrated electronic ignition--available with solid-state Ignitor or the powerful Ignitor III with built-in adjustable REV limiter and multi-spark through redline * High dielectric strength cap and rotor with brass contacts
( 254 )
$148.95
—
$272.10
Not ones to leave well enough alone, the engineers at PerTronix set out to improve upon their highly successful Ignitor® ignition conversion systems. The Ignitor II® conversion systems have all of the same quality features as the original Ignitor®, plus a powerful microprocessor controller to deliver, on average, 4x more available energy between 3,000 and 5,000 rpm than standard ignition systems. They're an ideal choice for collector car restoration because they fit entirely under the distributor cap. Order the model recommended for your year/make, distributor and engine application. Features include: * Compatible with 12 V negative ground systems and any induction coil * High-rpm performance is improved when used with the PerTronix Flame-Thrower II super low- resistance (0.6 ohms) 45,000 V coil * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops, on average, 2x more available plug voltage * Peak current level is reached just prior to spark for maximum energy without heat build-up, increasing coil and module life * Never change points again * Adjusts spark timing at higher rpm to compensate for the inherent electronic delay * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * Cannot be used with solid core spark plug wires; suppression-style or spiral-wound spark plug wires must be used
( 294 )
$130.09
—
$255.65
Summit Racing™ billet electronic Mopar distributors convert your old points ignition to a new modern electronic breaker-less system. Available as standalone units or in a complete kit, these distributors offer these benefits: improved timing and dwell control; higher energy at the spark plug for easier starting; improved throttle response; extended RPM range; and better efficiency, along with increased spark plug life. The distributor bodies are CNC-machined from forged 6061-T6 aircraft-grade aluminum and come with a glass fiber reinforced (PBT) tan cap (which is patterned after the OEM dual point cap)—with extra internal voltage dams that help to prevent crossfire while resisting carbon tracking. The shafts are centerless ground and ride on both upper and lower sealed roller bearings for smooth operation at high RPM's and extended service life. The cap contacts and rotor blade are brass and the rotor spring is stainless steel, all for long-term maximum conductivity. Kits include the orange 6,500 rpm ignition control module, an advance curve kit, wire harness, ballast resistor, performance oil-filled ignition coil, and installation hardware kit. Order the model recommended for your vehicle.
( 59 )
$194.99
—
$239.99
Our Summit Racing™ billet distributors provide reliable spark throughout the rpm range, so they'll deliver the performance you need, no matter what you drive--race car, street machine, or hauler. The affordable distributors have high-dollar features that outperform the competition, like a lightweight aluminum housing that's precision CNC-machined for strength and stability, polished steel shafts with sealed ball bearings for stable operation through 10,000 rpm, and a maintenance-free, high-output magnetic trigger for accurate and reliable performance. The distributors have a black alkyd cap and an adjustable mechanical advance, so you can precisely tune the curve to your engine setup. Some models also feature vacuum advance. An ignition box is required for use with Summit Racing™ billet distributors.
( 164 )
$189.99
—
$269.99
PerTronix Ignitor lobe sensor solid-state ignition systems replace breaker points and troublesome factory units with a dependable, self-contained, and maintenance-free electronic ignition system. The Ignitor has been called the "stealth" ignition because of its quick installation and nearly undetectable presence under your distributor cap. There is no "black box" to clutter the engine compartment. PerTronix Ignitor has proven itself in applications ranging from race cars to tractors. Order the model recommended for your vehicle, engine, and distributor application. Product features: * Delivers twice the voltage to your spark plugs—increasing horsepower, fuel economy, and spark plug life * 2:1 improvement over "points" in current fall time for increased coil output * No points to burn or moving parts to wear out * No magnetic sleeve or ring needed; uses existing distributor lobe for sensor trigger * Epoxy molding makes the module impervious to dirt, oil, grease, and moisture * Stable timing—no need for any adjustments * Will trigger most multi-spark CD ignitions * Available for 6 and 12 V negative and positive ground systems
( 207 )
$117.03
—
$168.15
COMP Cams melonized distributor gears are designed to provide universal compatibility for any steel, cast iron, or ductile iron camshaft—but without the wear concerns of bronze options. They're less prone to wear, and feature better timing accuracy and higher strength than any other universally compatible distributor gears. Choose the shaft distributor diameter for your particular vehicle.
( 59 )
$104.95
—
$118.95
Summit Racing™ Electronic Distributor Conversion kits allow you to Convert your factory single point distributor to a true 1 wire solid state ignition. Simply remove and replace your points and condenser with the solid state breakerless ignition module. Simple stealth 1 wire hookup is perfect for 100 point type restorations as it is undetectable. Never deal with breakdowns or adjusting worn or burned points again with a Summit Racing™ Electronic Distributor Conversion kit. • 1 Wire Hook-Up, just connect to the original points wire • Completely stock appearing • Fits inside 57-74 Delco Window cap distributors • Auto-standby prevents coil damage or dead battery if the ignition is accidentally left on • Active dwell control maintains high rpm spark energy while reducing coil heating at idle. • Hall effect rotary-vane sensor design compensates for worn bearings and distributor end play. • Magnetic sensor is unaffected by oil, dirt or other contaminants, unlike optical systems. • Over-voltage/over-current protected against damage from high amp battery chargers, reversed battery, or improper wiring • No distributor modification, disassembly, or removal is required , use SUM-RP20594 For New Repl. Black Ground Wire To Finish The Conversion.
( 10 )
$167.99
These PerTronix Ignitor III® solid-state ignition systems feature an adaptive dwell that maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance. Peak current level is reached just prior to spark for maximum energy without the heat buildup, increasing coil performance and module reliability. They adjust spark timing at higher rpm to compensate for the inherent electronic delay, sense startup, and develop more energy for quicker, easier starting. The PerTronix Ignitor III® solid-state ignition systems have a built-in LED for user feedback confirmation of the rev limiter setting.
( 83 )
$158.47
—
$221.07
Proform's Street/Strip HEI distributors have a variety of improvements over stock HEI distributors, such as a 50,000 V coil, a premium hi-dielectric cap with brass terminals, both upper and lower bushings for added durability, a low-saturation ignition module, and no voltage-reducing ballast resistors. These units offer calibrated advance curves that are optimized for maximum combustion efficiency, and the elimination of detonation damage and throttle ping. The distributors offer longer-term durability and a higher voltage spark that permits a bigger spark plug gap, resulting in more power and reduced plug fouling. The Ford models' internal coil and module make it possible for Blue Oval owners to avoid the unsightly wiring of stock Ford electronic ignitions. By eliminating the stock Ford or AMC ballast resistor, you'll get more ignition voltage, resulting in an improved spark. Another advantage to switching to HEI is access to easily-found HEI replacement parts. The Ford units are also assembled with upper and lower bushings, an upgrade from stock distributors that only have a single bushing. They're easy to install by connecting one 12 V hot wire to the distributor, making them a quick performance upgrade.
( 164 )
$130.99
—
$243.99
MSD's high-grade steel distributor gears are burnished for a smooth, scuff-free finish, and are machined for precise gear mesh. Excessive clearance causes timing fluctuation throughout the rpm range, resulting in lost horsepower, so MSD also designed these gears for tighter mesh between the camshaft and distributor drive gears.
( 33 )
$142.95
—
$155.95
Revitalize your small block Chevy's ignition with our Summit Racing™ ignition kits. These packages includes a Summit blueprinted HEI distributor with a powerful 50,000V coil, a high-output 5.7 amp module for precise timing, and a hardened iron drive gear suitable for use with a flat tappet camshaft. Plus, a set of custom-fit Summit 8mm ignition wires, which have a spiral-wound 270 ohm/ft. conductor around an aramid fiber core, blue silicone outer jackets, and stainless steel and brass terminals.
( 18 )
$150.98
The GM licensed distributors by Proform will give your engine the power and stability that is needed. Proform manufactures these distributors from quality to materials to ensure performance and durability. Other features includes the following: * High performance control module * Melonized steel gear * Sintered steel weights for lighter weight and durability * Adjustable vacuum advance * Bronze sintered bushings * Capacitor that prevents radio static * High-dielectric cap with brass terminals * Premium rotor (except where otherwise specified)
( 25 )
$195.95
BluePrint Engines Pro Billet ready-to-run distributors deliver reliable spark throughout the RPM range, so they'll deliver the performance you need, no matter what you drive—race car, street machine, or hauler. The economical distributors have high-dollar features that outperform the competition, like a lightweight billet aluminum housing that's precision CNC-machined for strength and stability, polished steel shafts with sealed ball bearings for stable operation through 10,000 rpm, and a maintenance-free, high-output magnetic trigger for accurate and reliable performance. The distributors have a black male/HEI cap and vacuum/mechanical advance. An ignition box is not required for use (except in some applications when used with an aftermarket EFI system). The distributors are available with or without mechanical tach drive. Additional details: Computer-controlled compatible: No Trigger style: Magnetic Advance type: Vacuum and mechanical Mechanical tach drive: Some models only Slip collar: No Distributor gear material: Melonized steel Distributor gear rotation: Standard Housing finish: Natural Marine use: No
( 4 )
$199.95
—
$229.95
PerTronix Ignitor II® lobe sensor solid-state ignition systems are smarter! Ignitor II units sense the coil current level and employ a powerful micro-controller to adjust the dwell. Variable dwell helps to maintain peak energy throughout the entire rpm range, and these systems develop up to four times more energy between 3000 and 5000 rpm than standard ignition systems. Order the kit recommended for your vehicle and engine application. Features include: * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops on-average four times more available energy between 3000 and 5000 rpm, and two times more available plug voltage * Compensates for inherent electronic delay by adjusting the spark timing throughout the entire rpm range * Synchronized peak current and spark timing reduces heat build-up * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * No magnetic sleeve or ring needed; uses existing distributor lobe for sensor trigger
( 31 )
$161.75
—
$216.95
COMP Cams composite distributor gears are manufactured from carbon ultra-poly composite to ensure superior strength and less wear. They're the latest in high-tech distributor gears designed around solving the wear issues associated with bronze gears in racing applications. The polymer gears are ideal for street roller applications--they feature virtually no wear, and they eliminate the problem of spark scatter associated with worn bronze gears. Composite gears have undergone stringent testing in various applications with positive results.
( 66 )
$151.95
—
$164.95
Davis Unified Ignition street/strip coil kits are capable of 7,000 rpm! The higher voltage output of these coil kits allows you to widen your spark plug gap up to .055 in. The wider plug gaps allow major spark energy into the combustion chamber for a better burn of the fuel mixture and increased horsepower. Due to the high-voltage output of the coils, a burn-through resistant brass terminal rotor is included, as well as nylon rotor screws to prevent misfires at extreme rpm. D.U.I. race coils are installed in your choice of colors, including a cool clear style so you can watch the sparks fly.
( 100 )
$105.99
Proform's Race HEI distributors are the real deal. They're designed to meet the high-performance demands of racing and keep on ticking. The distributors are built with 100 percent new parts, including the housing for guaranteed durability. They come in your choice of polished or unpolished aluminum housings, and four different cap colors. This distributors produce a 50,000 V spark through 7,500 rpm, for an enormous increase over OE HEIs. Also included are a 50 V coil, true spark alignment for instantaneous response, a high-performance curve, a premium cap with brass terminals, and a low-saturation ignition module.
( 82 )
$104.99
—
$124.99
FAST XDi Street HEI distributors include the industry-first gear technology with an upgraded module and coil that ensure clean ignition firing up to 8,500+ rpm. Ideal for SB and BB Chevy engines, each of the XDi distributors feature a plasma nitrided gear compatible with all popular camshaft materials, including cast iron, austempered iron, 5160 steel, and even 8620 steel. The special plasma nitride process used on the gears not only increases the gear's surface hardness, but also the "slickness" of the gear teeth reducing friction and increasing cam/distributor gear life, as well as making them superior to common melonized gears. XDi Street HEI distributors also feature powerful 6-amp ignition modules that drive custom-wound performance coils up to 50,000 V, providing the hot spark needed for maximum horsepower. While ready to run out of the box, for those that enjoy tuning the mechanical and vacuum advance mechanisms for better throttle response and fuel economy, FAST XDi Street HEI distributors include springs, advanced limit plate, and instructions needed to adjust the distributor for your particular engine/vehicle combination.
( 21 )
$191.95
Innovators West crank trigger wheels enable accurate ignition timing. Made from billet aluminum, the wheels are fitted with high-quality Neodymium magnets, either 4 or 12, providing you with precise timing control. Innovators West offers several wheels to choose from. Pick the one designed for your engine.
( 1 )
$197.03
These PerTronix replacement Flame-Thrower ignition modules feature the Hall effect integrated circuit triggered by a special magnetic sleeve fitted to the distributor shaft, which results in stable timing and precise spark distribution. They use a powerful micro-controller with dwell algorithms that allows the modules to adjust the dwell angle to maintain peak energy throughout the entire rpm range, increasing both the high and low rpm performance. Keep your distributor running smoothly and flawlessly with one of these PerTronix replacement Flame-Thrower ignition modules.
( 78 )
$135.25
—
$223.30
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
