Availability
TCI Super StreetFighter transmissions bridge the gap between the StreetFighters and full Competition series transmissions. Like the StreetFighter units, these are equipped with 100 percent tested, manual/automatic valve bodies. That means that most units allow you to manually shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic. In either mode, you get a racetrack shift that bangs through the gears and shaves time off your ETs. When you use the manual gear selection feature, the Super StreetFighters upshift and downshift right when you move the lever, with no lag or governor override. When you select the normal drive position, the transmissions retain positive automatic shifts, for the ease of driving you look for in an automatic transmission.
( 57 )
$2,085.95
—
$3,478.95
Our Summit Racing™ SFI-approved flexplates are built for racing. They're thicker than stock, double-welded with a forged one-piece ring gear. Available in several internally and externally balanced applications. NOT FOR MARINE APPLICATIONS.
( 502 )
$51.99
—
$101.99
For hauling heavy loads or for taking a trip across the country, TCI heavy-duty RV transmissions were designed with you in mind. They're built for strength, and they'll provide long, dependable service, as well as delivering maximum fuel economy. They have special valve-body modifications that increase fluid flow and improve shift characteristics, without the harsh feel of racing transmissions; and they include a low-gear package for pulling heavy loads.
( 3 )
$2,349.95
—
$2,885.95
TCI StreetFighter transmissions are durable enough to withstand the rigors of even the toughest street machines. Equipped with a manual/automatic valve body, most units allow you to manually shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic. In either mode, you get a race track shift that bangs through the gears and shaves time off of your ETs. When you use the manual gear selection feature, the StreetFighters upshift and downshift right when you move the lever, with no lag or governor override. When you select the normal drive position, they retain positive automatic shifts for the ease of driving you look for in an automatic transmission.
( 144 )
$1,772.95
—
$3,375.95
Summit Racing™ bellhousing separator plates are designed for Ford small block engines. These plates are precision-cut from aluminum or steel for durability and also feature special ventilation holes for improved air circulation. They provide the correct fit in small blocks to locate the engine components in just the right place. Summit Racing™ bellhousing separator plates are engineered to work with automatic transmissions, and fit both 157-tooth and 164-tooth flexplates.
( 85 )
$52.99
—
$61.99
Direct-fit Currie 9 in. rear-end axle housing assemblies have OE mounting points designed specifically for your application. This means that you won't have to spend hours cutting and welding in order to install them. These assemblies are available with disc or drum brakes, axles, bearings, and seals--everything you need to upgrade your rear-end, courtesy of Currie Enterprises.
( 7 )
$1,550.00
—
$1,750.00
Classic Performance rear axle conversion kits convert your rear to a 5-lug. If you've upgraded your 6-lug truck to a 5x5 in front, then you need to do the same in the back. These kits come complete with axles and may include spider gear and drums as well. Complete your 5-lug conversion with rear axle kits from Classic Performance.
( 52 )
$318.99
—
$528.99
Whether you drive a sand dragger, hill climber, or tractor puller, TCI has the transmission for you. The competition line of full manual 4x4 transmissions is built following the same specifications TCI uses in building thousands of drag race units. Applications are also available with trans-brake valve bodies.
( 1 )
$2,297.95
Bring out the performance of your 4x4 with these Maximizer transmissions from the folks at TCI. Four-wheel drive vehicles are tough on automatics, especially with the addition of a lift kit and larger tires. Maximizer transmissions are built with that in mind. Each one is assembled with the strongest components available and designed to provide crisp shifts, time and time again. They give you all of that, and they'll deliver long and dependable service, too.
( 31 )
$1,809.95
—
$2,345.95
Summit Racing™ Automatic Transmissions combine quality and economy to offer replacement transmissions in many styles and options. These units are remanufactured with all-new clutches, thrust washers, seals, bushings, and high-energy bands, along with other "failure prone" hard parts depending on unit. Other features include a rebuilt front pump, a valve body with shift for street and performance and high-quality seals and gaskets. You get all these impressive upgrades, along with reliable performance and extreme value. All transmissions are Dyno tested before they're shipped. Order the model recommended for your vehicle.
( 59 )
$2,641.99
—
$5,455.99
On Sale
Silver Sport EasyFit transmission kits are designed to be the perfect start to your TREMEC TKX installation. The kits are tailored with a vehicle-specific shifter position and components to make your installation easy and less costly. Features and specs: * STX Shifter--short throw shifter (depending on kit) * Transmission mount, reverse light harness, pilot bushing, and required hardware * 5-speed pattern shifter ball or 5-speed shift pattern console plate (depending on kit) * EDP coated, steel crossmember (depending on kit) * Gear ratios--2.87, 1.89, 1.28, 1.00, 0.68, 2.56R * 600 lb.-ft. torque rating * 26-spline count input shaft * Quality-tested with a 12-month factory warranty
( 4 )
$4,095.00
—
$4,495.00
$3,890.25
—
$4,270.25
Summit Racing™ offers cast aluminum differential covers for most case design applications. They feature thick gasket rails to resist oil leaks, as well as cast-in ribs for added strength and heat dissipation. Some models include a drain plug and/or filler plug. Choose from Natural Aluminum with machined rib edges, Black Powdercoated with machined rib edges or Highly Polished finishes. These differential covers include a gasket and mounting bolts for a complete installation.
( 108 )
$93.99
TCI Super StreetFighter transmission packages are the perfect solution for street cruisers who want excellent street performance and long-lasting durability. Intended for normally aspirated vehicles powered by engines producing between 725 and 1,025+ hp, depending on the application, the TCI Super StreetFighter packages feature the many of the same benefits as StreetFighter transmission packages with certain internal upgrades, including higher performance friction clutches and bands, as well as heavy-duty hard parts. The Super StreetFighter transmission offers both manual and automatic shift options to give you the power and shifts you want for the strip, or easy driving for the street. The packages include the torque converter with furnace-brazed fins, needle bearings, hardened pre-ground pump hubs, Max Shift street performance fluid, a dipstick, and transmission cooler. With a TCI Super StreetFighter transmission package installed, you'll be ready to take on the streets—and beyond!
( 2 )
$3,086.95
—
$3,112.95
Summit Racing™ OE replacement flywheels offer a great fit and an economical price. They are manufactured from ductile iron and offer original fit and function. Replace your old flywheels with Summit Racing™ OE parts.
( 66 )
$96.99
American Powertrain ProFit Tremec TKX manual transmissions and installation kits put the power to the pavement with unmatched durability and versatility. Tremec has normally sourced their aftermarket transmissions from the OE side, such as the Magnum T-56 and the T-5, but this new design is made from the ground up as a strictly aftermarket transmission. Designed to fit classic muscle cars and customs, the TKX has a tighter, more streamlined case, and features 600 lbs.-ft. of torque capacity and are capable of engines speeds of 8,000 rpm with shifts at 7,500 rpm. The compact design provides clearance in most transmission tunnels without floor modifications, while case strength has increased from previous models with the new 3-piece aluminum housing and gaskets at all flanges simplifies installation and eliminates fluid leaks. Additional features include: * Designed with your specific vehicle application in mind * Available with multiple gear ratio configurations for compatibility for multiple applications with three shifter locations * Multi-cone synchronizers and synchronizer rings are made of sintered bronze and carbon for superior shifts * All gears are supported by caged needle bearings to reduce end play * Gears and shafts are made from ASTM 4615 grade steel and provide increased torque carrying capacity * TKX manual transmissions have 31-spline output shafts for added strength, built-in reverse light switches, and cruise control safety switches * The TKX also has separate GM and Ford case patterns and input configurations—with integrated GM and Ford transmission mount patterns * Installation kits include a driveshaft slip yoke made from cryogenically hardened steel, a polyurethane transmission mount, a steel roller pilot bearing, and a reverse light wiring harness
( 1 )
$4,095.95
—
$4,559.95
On Sale
Auburn Gear Select-A-Loc differentials maximize your vehicle's traction with on-the-go system engage. These electronically controlled traction-enhancing differentials are selectable lockers offering the traction control of a limited-slip differential and a full-locking differential--all in one! When locker switch is off, the clutch pack activates the limited-slip mode. As torque increases, the separating forces within the differential gears increase, causing the clutch pack to be compressed, in turn providing bias torque to the highest traction wheel. When the locker switch is turned on, electronic current is sent to the electromagnetic coil which locks the axles together. Auburn Gear Select-A-Loc lockers feature a unique cone-clutch design with gearing made from aircraft-quality 9310 heat-treated billet steel for tough-as-nails strength. The lockers operate quietly without any shift fork or pins to line up to change the locker mode. With a limited-slip mode for on/off-road excitement and a true locker mode for the quarter-mile or nasty off-road terrain, Auburn Gear Select-A-Loc differentials deliver superior traction capabilities on the street, at the track, or off-road.
( 10 )
$1,415.99
—
$1,419.99
$1,274.39
—
$1,277.99
GearStar offers level 2, 3, and 4 Ford performance transmissions, custom built by one of their master technicians from start to finish, then dyno tested with converter to the equivalent of 100 miles, ensuring the transmission and converter package is in perfect operating condition before leaving their facility. GearStar Ford 4R70W Level 4 transmissions come fully equipped with a 20,000 GVW cooler, and a variety of customizations geared towards high performance driving. "Heart-pounding performance with industry leading experience"; select the proper transmission for your build and "strap yourself in to experience uncompromising performance" with the "legendary road-proven craftsmanship" of GearStar Performance transmissions. Features and specs: * 750 hp * Up to 550 lb.-ft. of torque * 10 in. custom built, custom stalled, multi-disc forged billet lock-up converter * Stall: 2,600 to 4,500 * Master overhaul kit with Alto hardened steels * Raybestos Gen II Racing frictions * High performance valve body reprogramming kit * New electronics: -- Updated EPC -- Shift solenoids -- Lock-up solenoid -- Internal wiring harness -- Output sensors * High-flow filter * Complete Torrington bearing kit * New bushing kit * New reverse band * Carbon fiber wide O.D. band * 300M hardened intermediate shaft * Heat-treated and stress relived input shaft * High-capacity 4-plate intermediate clutch * Direct clutch pack (eight frictions) * Wide reverse drum with mechanical diode * Updated sun shell and gear * New low spring and roller * High-capacity pump assembly with new gears * Updated O.D. servo pin and piston * Updated dual O-ring 3rd accumulator piston * Custom 360-degree adjustable shift linkage arm * Transmission mount
Not Yet Reviewed
$8,095.00
Currie 9 in. crate rear end assemblies offer a direct-fit, bolt-in solution for most common car, truck, and Jeep platforms. They feature larger spline axles, heavy-duty components, and internals from leading manufacturers. These axle assemblies are built to exacting standards matching factory specifications for suspension mounting points, pinion location, overall axle width, and wheel bolt pattern for hassle-free installation. Prior to shipping, skilled craftsman meticulously assemble essential parts to deliver years of trouble-free operation for your vehicle. They offer a broad range of gear ratios, performance differentials, or even a spool—if that's your thing. You'll be ready in no time for cruising, racing, off-roading, or just daily driving with Currie 9 in. crate rear end assemblies. Order the kit designed to fit your specific model.
( 4 )
$4,000.00
—
$5,300.00
TCI Competition transmissions are designed to take the abuse of drag-racing competition. They're available with full-manual and trans-brake setups and retain no automatic shift features. They feature special heat-treated races and sprags, high-performance clutches and bands, and improved lubrication. TCI blueprints and modifies these transmissions for maximum performance, then dyno tests and pressure tests them. So you can concentrate on winning the race!
( 31 )
$1,853.95
—
$3,542.95
Big power and lots of traction can twist your stock driveshaft into pieces, so replace it with something better, such as these Inland Empire Driveline high-strength driveshaft assemblies. These 3 in. diameter tubes are custom-drawn for consistent strength. Their forged yokes are welded on using state-of-the-art processes for improved reliability. They're accepted for use in most NHRA and all IHRA classes.
( 21 )
$590.93
On Sale
Lakewood safety bellhousings are designed for maximum performance and durability. They are cut on CNC 5 axis laser cutters rather than plasma cutters to improve finish quality, reduce heat damage and warpage from the plasma cutter, improve speed of manufacture, and make them all exactly the same. All bellhousings feature a scalloped plate on the bottom of the transmission surface made from G70 grade steel (70,000) psi which will help eliminate stripping the transmission bolts. The engine plates are made of H60 grade material and the bells are roto-brated after welding to relive any stresses created from the hydro forming, annealing, or welding process prior to machining and painting. The roto-brating process also closes the metal on the outer surface making them stronger. Ever wonder how the SFI tests bellhousings like these Lakewood safety bellhousings? First, they bolt the bellhousing to a machine with a cast iron flywheel and saw inside it. Then they spin the flywheel, causing the saw to cut through it until it explodes. If the bellhousing can contain the explosion, the bellhousing is approved. These safety bellhousings are a safeguard to minimize the destructive effects of such an explosion. Don't take unnecessary chances with your safety and the safety of innocent bystanders--Lakewood not only provides top-notch products, they also provide peace of mind.
( 46 )
$1,299.95
$844.95
TCI StreetFighter automatic transmission packages are durable enough to withstand the rigors of even the toughest street machines. Using the highest quality TCI manufactured components, each StreetFighter package is equipped with an automatic valve body, most units allow you to manually shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic. This gives you racetrack shifts and shaves time off your ETs. Each transmission goes through a variety of tests to verify that internal fluid pressures and shift characteristic match TCI's strict quality control standards. For the system to operate properly, all throttle linkage, vacuum lines and kick-down components must be connected. Each transmission package consists of a triple-tested TCI transmission and precision-tuned torque converter, a universal transmission cooler and premium TCI RTF transmission fluid. These packages are available with a variety of transmission models and other performance options. Choose the package for your application needs.
( 16 )
$4,095.95
—
$4,322.95
On Sale
GM's Powerglide is one of the longest-used and most common automatics on the drag-racing scene today. They are true workhorses; and TCI has a wide variety available to pick from, making it easy to find just what you need. Many are built up from standard Powerglide cases, while others are available with stronger, tougher Reid Racing cases.
( 4 )
$2,221.95
—
$6,322.95
Yukon Gear and Axle offers an extensive line of general replacement and high performance axles for passenger car, truck and SUV applications. High-quality alloys and the latest in heat-treating technologies provide a strong axle for off-road, on the street, or at the track. Order the kit recommended for fitment on your vehicle.
( 16 )
$499.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
