Availability
Edelbrock Performer EPS intake manifold and carburetor kits contain all of the necessary pieces to upgrade your induction system. They include an Edelbrock Performer EPS aluminum intake manifold with either a natural aluminum finish or an EnduraShine finish, an intake gasket set, intake manifold bolts, a carburetor stud kit, and a Performer Series 600 cfm electric choke carburetor. The EnduraShine finish is a bright silver chrome finish that resists discoloration from heat and features a clearcoated top coat to enhance abrasion and chemical resistance. The Edelbrock Performer EPS intake uses an all-new runner design tuned to produce substantial torque increases. Ready for a change? Try Edelbrock Performer EPS intake manifold and carburetor kits for your musclecar, hot rod, truck, or ordinary street vehicle.
( 60 )
$754.95
Edelbrock Performer intake manifold and carburetor kits contain all of the necessary pieces to upgrade your induction system. They include an Edelbrock Performer aluminum intake manifold, an intake gasket set, intake manifold bolts, a carburetor stud kit—and an Edelbrock Performer Series 600 cfm electric choke; a Thunder AVS 650 cfm electric choke; or a Thunder AVS 800 cfm electric choke (depending on your engine C.I.D.). The EnduraShine bright silver chrome finish is optional and resists discoloration from heat; it features a top clearcoat to enhance abrasion and chemical resistance. Edelbrock Performer intakes are designed to deliver improved throttle response over stock intakes. Are you ready for a change? Edelbrock Performer intake manifold and carburetor kits are available for small block and big block muscle car, hot rod, truck, and street vehicle applications.
( 34 )
$920.95
—
$991.95
Edelbrock Performer RPM aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. These heads offer improved power throughout the RPM range for greater throttle response and top-end horsepower. Countless options are available; order the model recommended for your vehicle and engine application.
( 167 )
$780.50
—
$976.50
Upgrade your induction system with superior paired performance! Edelbrock Performer Air-Gap intake manifold and carburetor kits contain all of the necessary pieces to upgrade your induction system. They include a Edelbrock Performer Air-Gap aluminum intake manifold, intake gasket set, intake manifold bolts, a carburetor stud kit, and an Edelbrock Performer Series 600 cfm electric choke carburetor. The intake uses an open air space that separates the runners from the hot lifter-valley cover. This results in a cooler, denser charge that means more power and excellent throttle response. Ready for a change? Try Edelbrock Performer Air-Gap intake manifold and carburetor kits for your musclecar, hot rod, truck, or ordinary street vehicle.
( 7 )
$935.95
These Performer RPM FE intake manifolds from Edelbrock are designed for high-performance street Ford FE V8s with standard low/medium-rise or Edelbrock Performer RPM FE heads. Their dual-plane constant cross-sectional area design builds low and mid-range acceleration, while optimized runner paths make top-end horsepower. These manifolds have a provision for adding the PCV or breather flange at the rear, and no exhaust crossover passage.
( 37 )
$865.95
Engineered for maximum performance, the new E-Tec Series aluminum cylinder heads fit all small Chevys with Vortec-style intake manifolds. They incorporate Edelbrock's new high-quench 64cc combustion chamber design, which promotes a more uniform atomization of the air/fuel mixture for increased power. Available with 170cc or 200cc intake runners, these cylinder heads are assembled with one-piece stainless steel valves, 1.46 in. valve springs, retainers, and locks. The E-Tec models accept either centerbolt or standard valve covers, and work with most exhaust manifolds and headers. Match your vehicle specs to the correct Edelbrock head for precise fitment.
( 13 )
$936.50
—
$975.50
Edelbrock Performer RPM bare NHRA Stock/Super Stock cylinder heads deliver great throttle response and power from 1,500 to 6,500 rpm, and with winning results. Offering the best in quality and performance, these bare heads are cast and heat-treated in the Edelbrock Foundry and machined in their manufacturing facility. Designed with the latest computer technology, they have highly efficient ports and state-of-the-art combustion chambers shapes for improved performance throughout the rpm range with great throttle response and top-end horsepower. Edelbrock Performer RPM bare NHRA Stock/Super Stock cylinder heads include top-quality features, like threaded inserts in rocker stud and exhaust bolt holes for superior strength and durability, and manganese-bronze valve guides with ductile iron valve seats.
( 1 )
$782.50
Few things say "musclecar" more emphatically than a Tunnel Ram manifold. You can bring back that nostalgic look and hairy-chested performance with Edelbrock's Street Tunnel Ram intake manifolds. They're applicable to all street machines, street rods, Pro-Street cars, and marine applications where low-end torque is not a major concern. Their single-plane, high-rise, dual-quad design delivers excellent mid-range torque and outstanding high-rpm horsepower, from 3,500 rpm up to 7,500.
( 14 )
$838.95
Edelbrock Victor spread-port intake manifolds are specifically designed for high-rpm drag racing engines using Brodix Big Duke or Dart Big Chief cylinder heads. They feature a runner section area of approximately 4.75 sq. in. The intake manifolds require port matching to the cylinder head for optimum performance and will produce higher top-end horsepower while maintaining consistency and throttle response.
Not Yet Reviewed
$887.95
—
$955.95
Make some noise with Edelbrock Rollin' Thunder hydraulic roller camshafts. Designed to improve horsepower and torque, they feature more aggressive profiles than conventional flat-tappet hydraulic cams without excessive valve overlap. Recommended for high performance street and strip use, Edelbrock Rollin' Thunder hydraulic roller camshafts work best from 1,500 to 6,500 rpm and are performance matched to Edelbrock Total Power Package components for proven performance. Features Include: * Performance--roller camshafts generate higher lift velocity and faster valve action for increased horsepower and torque gains * Drivability--produces great sounding idle with excellent vacuum at idle * Durability--the smaller surface contact area of roller tappets and their reduced friction, together with stronger camshaft material (hardened steel or iron) ensures longer camshaft life * Environmental--can use ILSAC GF-4 oil, which lowers emissions and does not require zinc or phosphate oil additives * Economy--reduced contact friction between the lifter and camshaft can increase fuel economy for better mileage
( 29 )
$937.95
Edelbrock Performer RPM Air-Gap intake manifolds incorporate race-winning technology that's been used on Victor Series competition intakes for years. The open air space from the Air-Gap design separates the runners from the heat of the lifter-valley cover. So, the air/fuel mixture stays cooler all the way to the heads, which produces a denser charge for more power. Runners are tuned to move the power band 1,000 rpm higher than Performer Air-Gap manifolds, from idle to 5,500 rpm up to 1,500 to 6,500 rpm.
( 442 )
$811.95
—
$844.95
Edelbrock Performer intake manifolds are low-rise, dual-plane designs with patented runner tuning and a 180 degree firing order that you won't find with the competition. This combination boosts torque over a wide rpm range, from idle to 5,500 rpm. These manifolds also deliver improved throttle response over stock intakes and are available in both EGR and non-EGR style.
( 570 )
$754.95
—
$919.95
Edelbrock Victor tunnel ram intake manifold bases are a modern updated design to their very successful Victor Ram 2-R Tunnel Ram intakes, which were first released over 35 years ago. They are designed for use with 468-582 C.I.D. standard-deck Chevrolet V8 engines with conventional rectangular port cylinder heads. This new and improved design has 7 in. long runners with close to 5.5 square-inches at the plenum, making them 25 percent larger than the current Victor Ram 2-R Tunnel Ram bases. These are the ideal intake manifolds for any modern high horsepower demanding application.
( 1 )
$979.95
Edelbrock Performer RPM dual-quad Air-Gap intake manifolds are designed to give your ride classic hot rod looks with modern-day performance. These manifolds stand just 1 5/8 in. taller than the original Edelbrock low-profile C-26 intakes and offer superior performance improvements in the 1,500-6,500 rpm range. The large runners feature Edelbrock's unique Air-Gap design that separates the runners from the hot engine valley for a cooler, denser charge. These aluminum dual-quad intake manifolds are available in your choice of natural or the popular EnduraShine finishes.
( 21 )
$845.95
Edelbrock Performer RPM Air-Gap intake manifold and carburetor kits contain all of the necessary pieces to upgrade your induction system. They include an Edelbrock Performer RPM Air-Gap aluminum intake manifold that is available in a variety of finishes, an intake gasket set, intake manifold bolts, a carburetor stud kit, and an Edelbrock Thunder AVS 800 cfm electric choke carburetor. The Edelbrock Performer RPM Air-Gap intake uses an open air space that separates the runners from the hot lifter-valley cover. This results in a cooler, denser charge that means more power and excellent throttle response. Ready for a change? Try these Edelbrock Performer RPM Air-Gap intake manifold and carburetor kits for your musclecar, hot rod, truck, or ordinary street vehicle.
( 2 )
$958.95
Edelbrock Pro-Port Raw Ford FE cylinder heads are the ultimate choice for extreme race applications. Their design is an un-ported small port and chamber version of the popular Performer RPM FE cylinder heads. They are cast with added material and smaller runners and chambers to allow for a wide variety of CNC porting to be performed. Valve seats and guides are included, but not installed. Professional prep will be required for these heads prior to installation.
Not Yet Reviewed
$782.50
Edelbrock rocker arm stud girdles are designed to fit the unique geometry of Edelbrock's Victor and Victor Jr. cylinder heads. They feature a 3-piece design, are manufactured from 3/4 in. billet aluminum, and include polylocks for your rocker arms. Now you can make quick, simple valve adjustments, while providing the required support for high-lift camshafts. Help your valvetrain last longer and be more durable with one of these Edelbrock rocker arm stud girdles.
( 2 )
$926.95
Ideal for those who desire affordable heads that make maximum power, these Victor Jr. heads from Edelbrock are just what the doctor ordered. Specifically designed for the needs of competition and ultra-high performance street engines, they offer increased horsepower and rpm potential in an out-of-the-box, cost-effective, race-winning setup. Features include hardened ductile iron valve seats and phosphor-bronze guides. They accept standard hardware and most are available in bare and assembled versions.
( 14 )
$782.50
—
$911.50
Edelbrock Super Victor intake manifolds are arguably the most popular and flexible manifolds in racing today. You'll find these single-plane manifolds on oval tracks, in drag racing, and on NASCAR engines--anywhere that maximum horsepower and torque are needed. The extended, constant cross-sectional area of the runners produces more torque across the midrange--from 3,500 up to 8,500 rpm in most instances. So, they deliver great throttle response off of the corners in oval track racing and improved 60 ft. times in drag racing. Their direct "line-of-sight" flow path provides maximum flow and there's plenty of material for port matching. They're also ideal for alcohol use.
( 53 )
$895.95
Edelbrock Pro-Flo XT EFI intake manifolds combine a user-friendly design with the latest technology. They're manufactured from aluminum and are available in a natural, polished, or black powdercoat finish for ultimate protection. Pro-Flo XT EFI intakes feature eight equal-length tapered runners and a large plenum. The fuel-injected manifolds are designed to deliver maximum horsepower and a broad torque curve throughout the 1,500 to 7,000 rpm range. Choose the model designed for your vehicle and cylinder head style application.
( 15 )
$752.95
Edelbrock's Torker II intake manifolds feature a single-plane, low-rise design that can give you top-end horsepower without affecting the mid-range. What Edelbrock did was increase the plenum volume and alter the short-side radius of the runners, to give the air/fuel charge a straight shot at the intake valves. That straight shot produces a potent power build from 2,500 to 6,500 rpm.
( 53 )
$919.95
Edelbrock Performer Dual-Quad Air-Gap EFI intake manifolds make it simple to convert competition engines to electronic fuel injection. They have injector bosses precisely positioned and machined for excellent fuel spray patterns and maximum power. These manifolds require a universal 4-barrel throttle body, fuel rail set, fuel injectors, fuel pump, and regulator--which are each sold separately.
( 1 )
$779.95
Edelbrock Performer RPM intake manifold and carburetor kits contain all of the necessary pieces to upgrade your induction system. They include an Edelbrock Performer RPM aluminum intake manifold that is coated with Edelbrock's EnduraShine finish, an intake gasket set, intake manifold bolts, a carburetor stud kit, and an Edelbrock Thunder AVS 800 cfm electric choke carburetor. The EnduraShine finish is a bright silver chrome finish that resists discoloration from heat and features a clearcoated top coat to enhance abrasion and chemical resistance. The Edelbrock Performer RPM intake features larger plenums and runners for engines with a camshaft, exhaust, and other performance modifications. Ready for a change? Try these Edelbrock Performer RPM intake manifold and carburetor kits for your musclecar, hot rod, truck, or ordinary street vehicle.
( 4 )
$946.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
