Availability
These replacement control arms will not break the bank! These Scott Drake reproduction control arms are all-new, not rebuilt units. Scott Drake manufactures these control arms from quality materials, ensuring a good fit. Additional features include the following: * Shaft * Bushings * Riveted ball joints * Nut with cotter key * 90 degree Zerk fittings * Washers and locking nuts
( 35 )
$84.09
Scott Drake offers neutral safety switches to replace your damaged, missing, or faulty original. They're available for a variety of transmission applications from the 1960s and '70s. These quality reproductions are factory-style, so they will fit your vehicle without any modifications.
( 24 )
$71.89
Add some extra protection over your stock lap belts. Scott Drake race-style lap belts are designed based on the vintage race car look that dominated the '60s. Scott Drake manufactures these belts with a 3 in. belt, a quick release, and leather protective pads.
( 25 )
$95.15
Scott Drake drum brake hubs enable you to easily replace your worn-out parts with brand spankin' new steel plates. They are available with either four or five holes for wheel studs, depending on your vehicle.
( 3 )
$99.95
Scott Drake water pump pulleys are 2-groove steel models with a painted black finish. They are needed when adding power steering to manual steering cars, and will fit specific engines with or without air conditioning. Keep your water pump turning and circulating coolant with the help of a new Scott Drake pulley.
( 1 )
$85.85
Scott Drake FE oil filter adapter is an exact reproduction of the updated version Ford switched to in 1968 which provides increased oil flow compared to earlier versions. It is an excellent upgrade for any pre-1968 high performance engine where oil flow is critical.
( 16 )
$78.05
Getting a carburetor to respond properly is much easier when you have the correct length and style of accelerator rod. Scott Drake throttle linkage kits are an exact reproduction of the OE parts designed to install on vintage Mustangs. These kits typically include an accelerator linkage rod, return spring, bushings, and clip kit. They're constructed from heavy-duty materials for longevity and dependability. Choose the correct fuel linkage kit needed—for either a 4-barrel or 2-barrel engine. Whether retrofitting a Mustang or simply making some upgrades, car aficionados rely on classic Ford replacement parts from Scott Drake.
( 33 )
$58.55
Scott Drake crankshaft pulleys are designed from steel and painted black. These 2-groove crank pulleys are used when adding power steering to a manual steering car. Their 3-bolt design will fit 1965-68 289 and 302 engines. Notes: They will not fit later 302s unless the proper harmonic balancer is installed. Not for cars with A/C.
( 2 )
$99.95
Keep your muscle car up to speed with ignition switch wiring pigtails from Scott Drake. They allow you to efficiently and quickly repair your classic Mustang's ignition harness, with correct color-coded wires. These replacement pigtails look and fit like the original, saving you from having to purchase and install an entirely new harness. When your original ignition switch begins to malfunction, Scott Drake pigtails are often the easy and affordable repair solution.
( 12 )
$51.19
There are a few unwritten rules that musclecar owners abide by—showcasing a strong exhaust note, a snazzy paint job, eye-catching wheels … and the perfect stance! For classic Mustang owners, in particular, Scott Drake rear-end lowering kits can help you achieve a level street look with the front-end. These leaf spring suspension blocks enable you to safely drop the backside by a full inch. No more need to heat your springs or remove the leafs! Scott Drake kits include cast aluminum lowering blocks, U-bolts, and nylock nuts. It's an easy adjustment that will make a noticeable difference both in appearance and in corner-handling performance.
( 29 )
$65.85
These original looking seat belts by Scott Drake have the correct vintage look used by Ford on several car models in the middle to late '60s. Scott Drake uses the starburst medallion on the buckles and the belts come available in many color selections.
( 31 )
$60.95
—
$72.05
Scott Drake outside door handles are direct fit replacements for your worn-out and faded parts. They include both left and right handles, as well as buttons, pads, hardware, and brackets.
( 34 )
$60.95
—
$97.55
Scott Drake rubber pony floor mats are exact replicas of the original Ford floor mats. They are molded in colored rubber and feature the spikes on the backside to reduce mat sliding. Now you can keep your carpet clean and maintain a factory look at the same time!
( 23 )
$78.05
—
$85.35
If shifting gears on your classic Mustang isn't as smooth as it was back in its heyday, one remedy could be a Scott Drake clutch pedal roller bearing rebuild kit. These small parts are an easy fix to reduce pressure on your clutch or brake pedal support bushings. The roller bearings allow for a free-moving pedal, and they'll last longer than standard bushings. A new shaft is included as a replacement if your original shaft is scored. Scott Drake clutch pedal roller bearing rebuild kits include: * Pedal shaft * 2 roller bushings * 4 spacer shims * Wave washer * 2 plastic bushings * 2 snap rings * Cotter pin
( 7 )
$78.05
Scott Drake Motorcraft spark plug wire sets are made to factory specifications to give you a perfect fit and finish, just like your original spark plug wires. If you're looking to restore your ride and want high-quality spark plug wire replacements just like your originals, Scott Drake Motorcraft spark plug wire sets are just the ones for you.
( 4 )
$71.89
Scott Drake instrument voltage regulators feature an improved design for your classic. They are more reliable and accurate in varying environments, like heat and humidity. These voltage regulators feature solid-state electronic circuitry and variable control.
( 28 )
$56.05
Power steering hoses need to fit properly—and Scott Drake offers a selection of quality replacements at affordable prices. They have designed authentic reproductions for your classic Mustang to provide not only the fit but the look, as well as carrying aftermarket styles. These lines feature the right bends and ends to make your install easier. Restore or repair your power steering with OE-style hoses and lines from Scott Drake.
( 38 )
$53.65
—
$62.19
Engine components need room to function properly. Scott Drake transmission to block spacer plates provide sufficient area for your flywheel, starter, and ring gear operation. These steel plates are precision-cut for the correct fit in your classic car's engine. Not too little, not too much; Scott Drake spacer plates locate your engine components in just the right place.
( 54 )
$82.95
—
$84.85
Scott Drake billet aluminum power steering pump pulleys are designed to work exclusively on Ford power steering pumps. Depending on the year and engine size, Ford offered 2 different diameter pulleys, a 5 in. and 5.5 in. Be sure to measure your original pulley to get the right diameter. They are interchangeable and both will work for just about any application. The larger 5.5 in. diameter version is best suited for high-rpm operation as it will help protect the pump. The smaller 5 in. version provides more power assist at low-rpm especially idle but not ideal for racing or high-rpms.
( 6 )
$68.05
—
$69.85
Are you tired of driving down the road and freezing? These Scott Drake replacement heater cores deliver performance and durability. Trust your heating needs to Scott Drake.
( 35 )
$63.39
—
$69.49
Are you having trouble closing your car door? Scott Drake door latch assemblies can remedy that. Over time, most drivers have experienced a door that sticks or just won't latch properly. Sometimes it's just one small part of the mechanism that causes the entire assembly to fail. These affordable reproductions are made from stamped steel and are available for fitment on a variety of classic makes and models. Gain perfect closure with Scott Drake door latch assemblies.
( 11 )
$85.35
Replace your worn-out and ugly door handles with Scott Drake. These Scott Drake interior door handles are excellent factory reproductions, ensuring a proper fit. They come available in a chrome or satin finish.
( 20 )
$69.49
—
$89.05
Stop wasting your gas money going from one swap meet to another! The folks at Scott Drake have put together a complete lamp kit without breaking your bank. Scott Drake manufactures these lamp kits from quality materials, ensuring a proper fit. Scott Drake includes the following items in each kit: * Parking lamp housings * Pads * Lenses * Gaskets * Bulbs * Mounting hardware
( 9 )
$97.55
Scott Drake offers backup light kits for a variety of applications. The lights are available individually, left or right; or in kits that include housings, pads, lenses, gaskets, bulbs, and installation hardware. Order the model recommended for your vehicle.
( 8 )
$99.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
