Availability
Showing In Stock Items. Show All 10 Items.
On Sale
TCI Super StreetFighter transmissions bridge the gap between the StreetFighters and full Competition series transmissions. Like the StreetFighter units, these are equipped with 100 percent tested, manual/automatic valve bodies. That means that most units allow you to manually shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic. In either mode, you get a racetrack shift that bangs through the gears and shaves time off your ETs. When you use the manual gear selection feature, the Super StreetFighters upshift and downshift right when you move the lever, with no lag or governor override. When you select the normal drive position, the transmissions retain positive automatic shifts, for the ease of driving you look for in an automatic transmission.
( 57 )
$2,182.95
Summit Racing™ Automatic Transmissions combine quality and economy to offer replacement transmissions in many styles and options. These units are remanufactured with all-new clutches, thrust washers, seals, bushings, and high-energy bands, along with other "failure prone" hard parts depending on unit. Other features include a rebuilt front pump, a valve body with shift for street and performance and high-quality seals and gaskets. You get all these impressive upgrades, along with reliable performance and extreme value. All transmissions are Dyno tested before they're shipped. Order the model recommended for your vehicle.
( 59 )
$3,084.99
—
$5,455.99
On Sale
Silver Sport EasyFit transmission kits are designed to be the perfect start to your TREMEC TKX installation. The kits are tailored with a vehicle-specific shifter position and components to make your installation easy and less costly. Features and specs: * STX Shifter--short throw shifter (depending on kit) * Transmission mount, reverse light harness, pilot bushing, and required hardware * 5-speed pattern shifter ball or 5-speed shift pattern console plate (depending on kit) * EDP coated, steel crossmember (depending on kit) * Gear ratios--2.87, 1.89, 1.28, 1.00, 0.68, 2.56R * 600 lb.-ft. torque rating * 26-spline count input shaft * Quality-tested with a 12-month factory warranty
( 3 )
$4,195.00
$3,985.25
American Powertrain ProFit Tremec TKX manual transmissions and installation kits put the power to the pavement with unmatched durability and versatility. Tremec has normally sourced their aftermarket transmissions from the OE side, such as the Magnum T-56 and the T-5, but this new design is made from the ground up as a strictly aftermarket transmission. Designed to fit classic muscle cars and customs, the TKX has a tighter, more streamlined case, and features 600 lbs.-ft. of torque capacity and are capable of engines speeds of 8,000 rpm with shifts at 7,500 rpm. The compact design provides clearance in most transmission tunnels without floor modifications, while case strength has increased from previous models with the new 3-piece aluminum housing and gaskets at all flanges simplifies installation and eliminates fluid leaks. Additional features include: * Designed with your specific vehicle application in mind * Available with multiple gear ratio configurations for compatibility for multiple applications with three shifter locations * Multi-cone synchronizers and synchronizer rings are made of sintered bronze and carbon for superior shifts * All gears are supported by caged needle bearings to reduce end play * Gears and shafts are made from ASTM 4615 grade steel and provide increased torque carrying capacity * TKX manual transmissions have 31-spline output shafts for added strength, built-in reverse light switches, and cruise control safety switches * The TKX also has separate GM and Ford case patterns and input configurations—with integrated GM and Ford transmission mount patterns * Installation kits include a driveshaft slip yoke made from cryogenically hardened steel, a polyurethane transmission mount, a steel roller pilot bearing, and a reverse light wiring harness
( 1 )
$4,350.00
Currie 9 in. crate rear end assemblies offer a direct-fit, bolt-in solution for most common car, truck, and Jeep platforms. They feature larger spline axles, heavy-duty components, and internals from leading manufacturers. These axle assemblies are built to exacting standards matching factory specifications for suspension mounting points, pinion location, overall axle width, and wheel bolt pattern for hassle-free installation. Prior to shipping, skilled craftsman meticulously assemble essential parts to deliver years of trouble-free operation for your vehicle. They offer a broad range of gear ratios, performance differentials, or even a spool—if that's your thing. You'll be ready in no time for cruising, racing, off-roading, or just daily driving with Currie 9 in. crate rear end assemblies. Order the kit designed to fit your specific model.
( 4 )
$4,700.00
RAM Pro Street dual disc clutch kits are precision-balanced for smooth operation—and come equipped with a billet cover for optimum release length, a comfortable pedal effort, and a high diaphragm finger position for excellent high-RPM shifting capability. The sprung hub top disc absorbs shock and reduces driveline noise. Pro Street kits are available with your choice of an organic friction disc or a metallic disc. Organic disc models are capable of handling 500 to 800 hp; the metallic disc models can handle between 600 and 1,200 hp. RAM Pro Street dual disc clutch kits include a billet aluminum, SFI-certified flywheel with a steel insert that has sufficient mass to draw heat away from the clutch without distortion. Some kits are available with a steel flywheel. Order the clutch recommended for your vehicle and engine application.
( 1 )
$2,159.00
RAM truck pulling clutch kits are custom-assembled for your specific application. These units feature a heavy-gauge steel cover with welded spring guides and a steel pressure ring. Flywheels are available in 30 or 40 lb. weights, as well as in billet aluminum. The clutches can be set up with either 5135 or 5191 compound iron discs with 1 to 10 splines. Single disc slipper-style clutches can be used with engines producing up to 800 hp, or where very limited slipping is desired. These clutches utilize the same quality components as the RAM dual disc pulling clutches. These units can be assembled with your choice of sintered iron disc materials and flywheel weights. Dual disc clutches will allow a more controlled slip as the vehicle comes out, without severe wear or every-round maintenance. Dual disc clutches are built to fit different stock depths or deep bellhousings.
( 2 )
$2,300.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
